EN 1034-6:2005+A1:2009

Current

Current The latest, up-to-date edition.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender

Available format(s):

Language(s):

Published date: 02-12-2009

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of hazards
5 Safety requirements and/or measures
6 Verification of compliance with safety requirements
  and/or measures
7 Information for use
Annex ZA (informative) Relationship between this European
                       Standard and the Essential Requirements
                       of EU Directive 98/37/EC
Annex ZB (informative) Relationship between this European
                       Standard and the Essential Requirements
                       of EU Directive 2006/42/EC

Abstract - (Show below) - (Hide below)

This European Standard applies to calenders intended for use in paper making and finishing and shall be used together with EN 1034-1:2000+A1:2009. It deals with all significant hazards listed in clause 4. Related safety requirements and/or measures are described in clause 5. It does not cover hazards connected with lifting operations required for changing rolls, inserting reels into the unwinding unit, removal of reels from the winding unit and heating systems for heating calender rolls..This European Standard is not applicable to calenders that have been manufactured before the date of publication of this standard.

General Product Information - (Show below) - (Hide below)

Development Note	To be read in conjunction with EN 1034-1. (03/2006) 2005 Edition Re-issued in December 2009 & incorporates AMD 1 2009. (01/2010)
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
UNI EN 1034-6 : 2010	Identical
NBN EN 1034-6 : 2006 + A1 2010	Identical
PN EN 1034-6 : 2007 + A1 2010	Identical
SN EN 1034-6 : 2006 + A1 2010	Identical
NS EN 1034-6 : 2005 + A1 2009	Identical
I.S. EN 1034-6:2006	Identical
NF EN 1034-6 : 2006 + A1 2010	Identical
BS EN 1034-6 : 2005	Identical
UNE-EN 1034-6:2006	Identical
NEN EN 1034-6 : 2005 + A1 2009	Identical
UNE-EN 1034-6:2006+A1:2010	Identical
DIN EN 1034-6:2010-07	Identical
BS EN 1034-6:2005+A1:2009	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN EN 1034-21 E : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
12/30243081 DC : 0	BS EN 1034-17 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
12/30243084 DC : 0	BS EN 1034-21 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
UNI EN 1034-21 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
DIN EN 1034-3:2012-02	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
EN 1034-17:2012	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines
EN 1034-21:2012	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 21: Coating machines
11/30243078 DC : 0	BS EN 1034-16 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
BS EN 1034-16:2012	Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Paper and board making machines
I.S. EN 1034-16:2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
UNE-EN 1034-3:2012	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders
I.S. EN 1034-3:2011	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
BS EN 1034-17:2012	Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Tissue making machines
BS EN 1034-21:2012	Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Coating machines
I.S. EN 1034-21:2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
UNI EN 1034-16 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
BS EN 1034-3:2011	Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Rereelers and winders
UNI EN 1034-3 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
DIN EN 1034-16:2012-06	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
UNI EN 1034-17 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
11/30227089 DC : 0	BS EN 1034-3 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
BS EN 15906:2011	Winter maintenance equipment. Snow removal machines with rotating tools. Specification and clearing capacity
DIN EN 1034-17 E : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
PREN 1034-3 : DRAFT 2011	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
DIN EN 1034-17:2012-11	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines
EN 15906:2011	Winter maintenance equipment - Snow removal machines with rotating tools - Specification and clearing capacity
DIN EN 1034-21:2012-11	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
I.S. EN 1034-17:2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
EN 1034-3:2011	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders
EN 1034-16:2012	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines

Standards Referencing This Book - (Show below) - (Hide below)

EN 294:1992/AC:1993	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
EN 1127-1:2011	Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 418 : 1992	SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
EN 982:1996+A1:2008	Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
EN 1037:1995+A1:2008	Safety of machinery - Prevention of unexpected start-up
ISO 14122-3:2016	Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
EN ISO 11957:2009	Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996)
ISO 14122-1:2016	Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
EN 1088:1995+A2:2008	Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
EN 894-2:1997+A1:2008	Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
IEC 61000-6-2:2016	Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
EN 999:1998+A1:2008	Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body
EN 349:1993+A1:2008	Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
IEC 60204-1:2016	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60204-11:2000	Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
ISO 11957:1996	Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements
EN 1760-1:1997+A1:2009	Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
EN 1050 : 1996	SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
EN 1034-1:2000+A1:2010	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements
EN 563:1994/A1:1999/AC:2000	SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES
EN ISO 12100-1:2003/A1:2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN ISO 14122-3:2016	Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)
EN 61496-1:2013/AC:2015	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012)
EN 61000-6-2:2005/corrigendum:2005	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
EN 953:1997+A1:2009	Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 13023:2003+A1:2010	Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3
EN ISO 14122-2:2016	Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016)
ISO 12100-2:2003	Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
EN ISO 12100-2:2003/A1:2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
IEC 61496-1:2012	Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
EN 983:1996+A1:2008	Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
EN 954-1 : 1996	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
ISO 12100-1:2003	Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN 1760-2:2001+A1:2009	Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
1998/37/EC : 1998	DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
ISO 14122-2:2016	Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
EN ISO 14122-1:2016	Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)
IEC 61000-6-2 : 3.0:2016	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC 61496-2:2013	Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
EN 60204-1 : 2006 COR 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 894-1:1997+A1:2008	Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart