EN 1093-7:1998+A1:2008

Current

Current The latest, up-to-date edition.

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet

Available format(s):

Language(s):

Published date: 16-07-2008

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 Principle
5 Description of the test arrangement
6 Operation of the air cleaning system
7 Procedure
8 Expression of results
9 Test report
Annex ZA (informative) Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 98/37/EC
Annex ZB (informative) Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 2006/42/EC
Bibliography

Abstract - (Show below) - (Hide below)

This European Standard specifies a test rig method for the measurement of the separation efficiency by mass of air cleaning systems, operating under defined conditions. The method shall apply to systems that clean air of aerosols (smoke, dust, fume, mist), vapour or gas with defined air inlet and air outlet which can be connected to measurement ducts.Measurement of the separation efficiency by mass of an air cleaning system for an intended use can serve for the:a)evaluation of the performance of an air cleaning system;b)evaluation of the improvement of the air cleaning system;c)comparison of air cleaning systems;d)ranking of air cleaning systems according to their separation efficiency by mass;e)determination of the state of the art of air cleaning systems of the same intended use with respect to their separation efficiency by mass.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 114
Development Note	1998 Edition Re-Issued in July 2008 & incorporates AMD 1 2008. (07/2008)
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NBN EN 1093-7 : 1998 + A1 2008	Identical
NEN EN 1093-7 : 1998 + A1 2008	Identical
BS EN 1093-7 : 1998	Identical
BS EN 1093-7 : 1999	Identical
NF EN 1093-7 : 1999 + A1 2008	Identical
UNE-EN 1093-7:1999	Identical
NS EN 1093-7 : 1998 + A1 2008	Identical
I.S. EN 1093-7:1999	Identical
SN EN 1093-7 : 1999 + A1 2008	Identical
PN EN 1093-7 : 2005 + A1 2010	Identical
UNI EN 1093-7 : 2008	Identical
DIN EN 1093-7:2008-11	Identical
UNE-EN 1093-7:1999+A1:2008	Identical
BS EN 1093-7:1998+A1:2008	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

11/30242017 DC : 0	BS EN ISO 15012-1 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY
PREN 16770 : DRAFT 2014	SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS
EN 12779:2015	Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
EN 1093-1:2008	Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
07/30165769 DC : 0	BS EN 1093-1 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 1: SELECTION OF TEST METHODS
BS EN ISO 15012-4:2016	Health and safety in welding and allied processes. Equipment for capture and separation of welding fume General requirements
13/30254060 DC : 0	BS EN ISO 15012-4 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 4: DESIGN REQUIREMENTS
DIN EN 12779:2016-03	Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
I.S. EN ISO 15012-1:2013	HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY (ISO 15012-1:2013)
I.S. EN 1093-1:2008	SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 1: SELECTION OF TEST METHODS
I.S. EN 12779:2015	SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS
UNI EN ISO 15012-1 : 2013	HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY
14/30292850 DC : 0	BS EN 12779 - SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS
00/709412 DC : DRAFT MAY 2000	BS EN ISO 15012-1 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 1: TESTING OF THE SEPARATION EFFICIENCY FOR WELDING FUME
PREN 12779 : DRAFT 2014	SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS
DIN EN ISO 15012-1:2013-08	HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY (ISO 15012-1:2013)
EN ISO 15012-4:2016	Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: General requirements (ISO 15012-4:2016)
UNI EN 1093-1 : 2009	SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 1: SELECTION OF TEST METHODS
ISO/TR 18569:2004	Safety of machinery Guidelines for the understanding and use of safety of machinery standards
14/30301874 DC : 0	BS EN 16770 - SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS
DIN EN 1093-1:2009-02	SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 1: SELECTION OF TEST METHODS
BS EN 1093-1:2008	Safety of machinery. Evaluation of the emission of airborne hazardous substances Selection of test methods
ISO 15012-4:2016	Health and safety in welding and allied processes Equipment for capture and separation of welding fume Part 4: General requirements
BS EN 12779:2015	Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements
UNE-EN ISO 15012-1:2013	Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: Requirements for testing and marking of separation efficiency (ISO 15012-1:2013)
BS EN ISO 15012-1:2013	Health and safety in welding and allied processes. Equipment for capture and separation of welding fume Requirements for testing and marking of separation efficiency
EN ISO 15012-1:2013	Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: Requirements for testing and marking of separation efficiency (ISO 15012-1:2013)
I.S. EN ISO 15012-4:2016	HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 4: GENERAL REQUIREMENTS (ISO 15012-4:2016)
PD ISO/TR 18569:2004	Safety of machinery. Guidelines for the understanding and use of safety of machinery standards.
UNE-EN 12779:2016	Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
ISO 15012-1:2013	Health and safety in welding and allied processes Equipment for capture and separation of welding fume Part 1: Requirements for testing and marking of separation efficiency

Standards Referencing This Book - (Show below) - (Hide below)

EN 1093-1:2008	Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
ISO 5168:2005	Measurement of fluid flow — Procedures for the evaluation of uncertainties
ISO 7145:1982	Determination of flowrate of fluids in closed conduits of circular cross-section Method of velocity measurement at one point of the cross-section
EN 481:1993	Workplace atmospheres - Size fraction definitions for measurement of airborne particles
EN 292-1 : 1991	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY
ISO 4053-1:1977	Measurement of gas flow in conduits — Tracer methods — Part 1: General
ISO 5167-1:2003	Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements
ENV 1070 : 1993	SAFETY OF MACHINERY - TERMINOLOGY
EN 292-2 : 91 AMD 1 95	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION
ISO 3966:2008	Measurement of fluid flow in closed conduits Velocity area method using Pitot static tubes
ISO 4006:1991	Measurement of fluid flow in closed conduits — Vocabulary and symbols

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart