EN 124-6:2015
Current
Current
The latest, up-to-date edition.
Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
Published date
10-06-2015
Publisher
Sorry this product is not available in your region.
This European Standard applies to manhole tops and gully tops made of Polypropylene (PP), Polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) by a moulding or extrusion process, with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic.It is applicable to manhole tops and gully tops for use in-areas which can only be used by pedestrians and pedal cyclists (class A 15), and-pedestrian areas and comparable areas, car parks or car parking decks (class B 125).This European Standard gives guidance for combinations of covers/grating made of PP, PE or PVC–U with frames according to EN 124 2, EN 124 3, EN 124 4 and EN 124 5.This European Standard is not applicable in isolation but only in combination with EN 124 1.This European Standard is not applicable to:-rodding point covers according to EN 13598 1;-gratings/covers as part of prefabricated drainage channels according to EN 1433;-floor and roof gullies in buildings which are specified in EN 1253 (all parts);-surface boxes.
| Committee |
CEN/TC 165
|
| DevelopmentNote |
Supersedes PREN 124-6. (06/2015) Together with EN 124-1, EN 124-2, EN 124-3, EN 124-4 & EN 124-5 it supersedes EN 124. (07/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| I.S. EN 124-6:2015 | Identical |
| BS EN 124-6:2015 | Identical |
| DIN EN 124-6:2015-09 | Identical |
| NF EN 124-6 : 2015 | Identical |
| NS EN 124-6 : 2015 | Identical |
| NEN EN 124-6 : 2015 | Identical |
| PN EN 124-6 : 2015 | Identical |
| SS-EN 124-6:2015 | Identical |
| NBN EN 124-6 : 2015 | Identical |
| UNE-EN 124-6:2015 | Identical |
| DIN EN 124-3:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS |
| I.S. EN 124-2:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 2: GULLY TOPS AND MANHOLE TOPS MADE OF CAST IRON |
| EN 124-4:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete |
| EN 124-2:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron |
| EN 124-3:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys |
| EN 124-5:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials |
| DIN 1229:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - SECURING OF THE COVER OR GRATING WITHIN THE FRAME |
| BS EN 124-2:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of cast iron |
| I.S. EN 124-1:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: DEFINITIONS, CLASSIFICATION, GENERAL PRINCIPLES OF DESIGN, PERFORMANCE REQUIREMENTS AND TEST METHODS |
| BS EN 124-4:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of steel reinforced concrete |
| BS EN 124-3:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of steel or aluminium alloys |
| I.S. EN 124-5:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS |
| BS EN 124-5:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of composite materials |
| BS EN 124-1:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Definitions, classification, general principles of design, performance requirements and test methods |
| DIN EN 124-5:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS |
| DIN EN 124-1:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: DEFINITIONS, CLASSIFICATION, GENERAL PRINCIPLES OF DESIGN, PERFORMANCE REQUIREMENTS AND TEST METHODS |
| I.S. EN 124-3:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS |
| EN 13598-2:2016 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers |
| I.S. EN 124-4:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 4: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL REINFORCED CONCRETE |
| DIN EN 124-4:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 4: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL REINFORCED CONCRETE |
| DIN EN 13598-2:2016-09 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR MANHOLES AND INSPECTION CHAMBERS |
| DIN EN 124-2:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 2: GULLY TOPS AND MANHOLE TOPS MADE OF CAST IRON |
| I.S. EN 13598-2:2016 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR MANHOLES AND INSPECTION CHAMBERS |
| BS EN 13598-2:2009 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Specifications for manholes and inspection chambers in traffic areas and deep underground installations |
| EN 124-1:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods |
| UNE-EN 124-1:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods |
| UNE-EN 124-4:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete |
| UNE-EN 124-5:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials |
| UNE-EN 13598-2:2017 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers |
| UNE-EN 124-3:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys |
| UNE-EN 124-2:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron |
| ISO 4892-1:2016 | Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance |
| ISO 580:2005 | Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating |
| EN ISO 3126:2005 | Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005) |
| EN 12200-1:2016 | Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| EN ISO 8256:2004 | Plastics - Determination of tensile-impact strength (ISO 8256:2004) |
| EN 124-2:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron |
| EN 13598-1:2010 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs |
| EN ISO 4892-1:2016 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
| EN ISO 4892-3:2016 | Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016) |
| ISO 1133-1:2011 | Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method |
| ISO 3127:1994 | Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method |
| ISO 6964:1986 | Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method and basic specification |
| EN 13598-2:2016 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers |
| EN 607:2004 | Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing |
| ISO 8256:2004 | Plastics — Determination of tensile-impact strength |
| ISO 15100:2000 | Plastics — Reinforcement fibres — Chopped strands — Determination of bulk density |
| EN ISO 9163:2005 | Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005) |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| ISO 9163:2005 | Textile glass — Rovings — Manufacture of test specimens and determination of tensile strength of impregnated rovings |
| ISO 3126:2005 | Plastics piping systems — Plastics components — Determination of dimensions |
| EN ISO 1133-1:2011 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 4892-3:2016 | Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps |
| EN 14758-1:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system |
| ISO 1183-1:2012 | Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method |
| EN 12666-1:2005+A1:2011 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system |
| ISO 1183-2:2004 | Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN ISO 580:2005 | Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005) |
| EN 1401-1:2009 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| EN 12164:2016 | Copper and copper alloys - Rod for free machining purposes |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| EN 124-4:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete |
| EN 16245-3:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre |
| EN 124-3:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys |
| EN 20105-A02:1994 | Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993) |
| ISO 105-A02:1993 | Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour |
| ISO 1888:2006 | Textile glass — Staple fibres or filaments — Determination of average diameter |
| EN 124-5:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials |
| EN 12201-1:2011 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts |
| ISO 178:2010 | Plastics — Determination of flexural properties |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| EN 513:1999 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering |
| EN 124-1:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| ISO 527-1:2012 | Plastics — Determination of tensile properties — Part 1: General principles |
| EN ISO 1183-2:2004 | Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004) |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.