EN 12504-1:2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
Superseded date
05-07-2019
Superseded by
Published date
11-02-2009
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Principle
4 Apparatus
5 Taking cores
6 Examination
7 Preparation of cores
8 Compression test
9 Expression of results
10 Test report
11 Precision
Annex A (informative) - The effect of aggregate size and core
diameter on core specimen strength
Bibliography
This European Standard specifies a method for taking cores from hardened concrete, their examination, preparation for testing and determination of compressive strength.NOTE 1This European Standard does not give guidance on the decision to drill cores or on the locations for drilling.NOTE 2This European Standard does not provide procedures for interpreting the core strength results.NOTE 3For the assessment of in-situ compressive strength in structures and precast concrete components EN 13791 may be used.
| Committee |
CEN/TC 104
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ONORM EN 12504-1 : 2009 | Identical |
| UNE-EN 12504-1:2009 | Identical |
| PN EN 12504-1 : 2011 | Identical |
| SN EN 12504-1 : 2009 | Identical |
| BS EN 12504-1:2009 | Identical |
| NBN EN 12504-1 : 2009 | Identical |
| I.S. EN 12504-1:2009 | Identical |
| NF EN 12504-1 : 2012 | Identical |
| NEN EN 12504-1 : 2009 | Identical |
| NS EN 12504-1 : 2009 | Identical |
| UNI EN 12504-1 : 2009 | Identical |
| DIN EN 12504-1:2009-07 | Identical |
| DIN EN 12390-11:2015-11 | TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE |
| EN 12504-4:2004 | Testing concrete - Part 4: Determination of ultrasonic pulse velocity |
| S.R. CEN TS 1992-4-1:2009 | DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL |
| I.S. EN ISO 21809-5:2017 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS (ISO 21809-5:2017) |
| EN 12390-13:2013 | Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression |
| BS EN 206 : 2013 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| DD CEN/TS 1992-4-1:2009 | Design of fastenings for use in concrete General |
| BS EN 13791:2007 | Assessment of in-situ compressive strength in structures and pre-cast concrete components |
| DIN EN 13863-4:2012-07 | Concrete pavements - Part 4: Test methods for the determination of wear resistance of concrete pavements to studded tyres; German version EN 13863-4:2012 |
| DIN EN 13863-3:2005-02 | Concrete pavements - Part 3: Test methods for the determination of the thickness of a concrete pavement from cores |
| DIN EN 13863-2:2004-01 | Concrete pavements - Part 2: Test method for the determination of the bond between two layers; German version EN 13863-2:2003 |
| BS EN 14488-6:2006 | Testing sprayed concrete Thickness of concrete on a substrate |
| UNE-EN 13877-2:2013 | Concrete pavements - Part 2: Functional requirements for concrete pavements |
| BS EN 13863-3:2004 | Concrete pavements Test methods for the determination of the thickness of a concrete pavement from cores |
| I.S. EN 14488-4:2005 | TESTING SPRAYED CONCRETE - PART 4: BOND STRENGTH OF CORES BY DIRECT TENSION |
| CEN/TS 1992-4-1:2009 | Design of fastenings for use in concrete - Part 4-1: General |
| EN 12504-3:2005 | Testing concrete in structures - Part 3: Determination of pull-out force |
| EN 12502-3:2004 | Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 3: Influencing factors for hot dip galvanised ferrous materials |
| DIN EN 12504-4:2004-12 | Testing concrete in structures - Part 4: Determination of ultrasonic pulse velocity |
| DIN EN 12504-3:2005-07 | Testing concrete in structures - Part 3: Determination of pull-out force; German version EN 12504-3:2005 |
| EN 12390-11:2015 | Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion |
| EN 1354:2005 | Determination of compressive strength of lightweight aggregate concrete with open structure |
| EN 1168:2005+A3:2011 | Precast concrete products - Hollow core slabs |
| ONORM EN 14487-1 : 2006 | SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
| 12/30259409 DC : 0 | BS EN 12390-13 - TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION |
| BS EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
| BS EN 12390-11:2015 | Testing hardened concrete Determination of the chloride resistance of concrete, unidirectional diffusion |
| 17/30354239 DC : 0 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| BS EN ISO 21809-5:2017 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems External concrete coatings |
| 02/104236 DC : DRAFT JUNE 2002 | EN 14487-1 - SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
| 10/30218985 DC : DRAFT JUNE 2010 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| UNI CEN/TS 1992-4-1 : 2009 | DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL |
| BS EN 13369:2013 | Common rules for precast concrete products |
| I.S. EN 1504-10:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| ISO 21809-5:2017 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings |
| DIN EN 14488-4:2008-08 | TESTING SPRAYED CONCRETE - PART 4: BOND STRENGTH OF CORES BY DIRECT TENSION |
| DIN EN 14487-1:2006-03 | Sprayed concrete - Part 1: Definitions, specifications and conformity |
| BS EN 13863-4:2012 | Concrete pavements Test methods for the determination of wear resistance of concrete pavements to studded tyres |
| BS EN 14488-7:2006 | Testing sprayed concrete Fibre content of fibre reinforced concrete |
| I.S. EN 1168:2005 | PRECAST CONCRETE PRODUCTS - HOLLOW CORE SLABS |
| DIN EN 12390-3:2009-07 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| I.S. EN 13877-2:2013 | CONCRETE PAVEMENTS - PART 2: FUNCTIONAL REQUIREMENTS FOR CONCRETE PAVEMENTS |
| I.S. EN 13863-4:2012 | CONCRETE PAVEMENTS - PART 4: TEST METHODS FOR THE DETERMINATION OF WEAR RESISTANCE OF CONCRETE PAVEMENTS TO STUDDED TYRES |
| I.S. EN 1354:2005 | DETERMINATION OF COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE |
| I.S. EN 14487-1:2005 | SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
| 15/30327977 DC : 0 | BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| PREN 1504-10 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| I.S. EN 206-1:2002 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY (INCLUDING IRISH NATIONAL ANNEX) |
| XP CEN/TS 12390-11 : 2010 XP | TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE, UNIDIRECTIONAL DIFFUSION |
| DD CEN/TS 12390-11:2010 | Testing hardened concrete Determination of the chloride resistance of concrete, unidirectional diffusion |
| DIN 1045-4:2012-02 | Concrete, reinforced and prestressed concrete structures - Part 4: Additional rules for the production and the conformity of prefabricated elements |
| 03/306075 DC : DRAFT APR 2003 | BS EN 13791 - ASSESSMENT OF CONCRETE COMPRESSIVE STRENGTH IN STRUCTURES OR IN STRUCTURAL ELEMENTS |
| DIN EN 206:2014-07 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| I.S. EN 12390-11:2015 | TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE, UNIDIRECTIONAL DIFFUSION |
| DIN EN 13369:2013-08 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| PREN 14488-1 : DRAFT 2002 | TESTING SPRAYED CONCRETE - PART 1: SAMPLING FRESH AND HARDENED CONCRETE |
| EN ISO 21809-5:2017 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
| I.S. EN 12390-3:2009 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| DIN EN 1354:2005-09 | Determination of compressive strength of lightweight aggregate concrete with open structure; German version EN 1354:2005 |
| DIN EN 14488-1:2005-11 | TESTING SPRAYED CONCRETE - PART 1: SAMPLING FRESH AND HARDENED CONCRETE |
| DIN EN 1168:2011-12 | Precast concrete products - Hollow core slabs (includes Amendment A3:2011) |
| DIN EN 14488-7:2006-08 | Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete |
| DIN EN 14488-6:2006-09 | TESTING SPRAYED CONCRETE - PART 6: THICKNESS OF CONCRETE ON A SUBSTRATE |
| DIN EN 13791:2008-05 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| BS EN 1354:2005 | Determination of compressive strength of lightweight aggregate concrete with open structure |
| BS EN 14488-4 : 2005 | TESTING SPRAYED CONCRETE - PART 4: BOND STRENGTH OF CORES BY DIRECT TENSION |
| DIN EN 13978-1:2005-07 | PRECAST CONCRETE PRODUCTS - PRECAST CONCRETE GARAGES - PART 1: REQUIREMENTS FOR REINFORCED GARAGES MONOLITHIC OR CONSISTING OF SINGLE SECTIONS WITH ROOM DIMENSIONS |
| EEMUA 207 : 2009 | DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION |
| UNI EN 1168 : 2012 | PRECAST CONCRETE PRODUCTS - HOLLOW CORE SLABS |
| UNI EN 13791 : 2008 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| UNI EN 1504-10 : 2005 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| UNI EN 13863-4 : 2012 | CONCRETE PAVEMENTS - PART 4: TEST METHODS FOR THE DETERMINATION OF WEAR RESISTANCE OF CONCRETE PAVEMENTS TO STUDDED TYRES |
| EN 14487-1:2005 | Sprayed concrete - Part 1: Definitions, specifications and conformity |
| UNI EN 14488-4 : 2008 | TESTING SPRAYED CONCRETE - PART 4: BOND STRENGTH OF CORES BY DIRECT TENSION |
| UNI EN 12390-3 : 2009 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| UNI EN 13877-2 : 2013 | CONCRETE PAVEMENTS - PART 2: FUNCTIONAL REQUIREMENTS FOR CONCRETE PAVEMENTS |
| DIN EN 12390-13:2014-06 | Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression |
| EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
| S.R. CEN TS 12390-11:2010 | TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE, UNIDIRECTIONAL DIFFUSION |
| UNI EN ISO 21809-5 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| 03/310136 DC : DRAFT JULY 2003 | EN 14488-6 - TESTING SPRAYED CONCRETE - PART 6: THICKNESS OF CONCRETE ON A SUBSTRATE |
| PREN 13369 : DRAFT 2017 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| I.S. EN 13791:2007 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| BS EN 12390-13:2013 | Testing hardened concrete Determination of secant modulus of elasticity in compression |
| 12/30257889 DC : 0 | BS EN 206 - CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| UNI EN 12390-13 : 2013 | TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION |
| PREN 14488-4 : DRAFT 2002 | TESTING SPRAYED CONCRETE - PART 4: BOND STRENGTH OF CORES BY DIRECT TENSION |
| 02/101724 DC : DRAFT FEB 2002 | PREN 13863-4 - CONCRETE PAVEMENTS - TEST METHODS FOR FUNCTIONAL REQUIREMENTS - PART 4: DETERMINATION OF THE THICKNESS OF A CONCRETE SLAB |
| 08/30160023 DC : DRAFT AUG 2008 | BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| I.S. EN 12504-4:2004 | TESTING CONCRETE - PART 4: DETERMINATION OF ULTRASONIC PULSE VELOCITY |
| I.S. EN 12390-13:2013 | TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION |
| PREN 12390-3 : DRAFT 2017 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| 17/30360096 DC : 0 | BS EN 12390-3 - TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| I.S. EN 13369:2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| EN 13369:2018 | Common rules for precast concrete products |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| BS EN 14487-1:2005 | Sprayed concrete Definitions, specifications and conformity |
| BS EN 206-1:2000 | Concrete Specification, performance, production and conformity |
| UNE-EN 13863-4:2012 | Concrete pavements - Part 4: Test methods for the determination of wear resistance of concrete pavements to studded tyres |
| BS EN 12502-3:2004 | Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems Influencing factors for hot dip galvanised ferrous materials |
| BS EN 13978-1:2005 | Precast concrete products. Precast concrete garages Requirements for reinforced garages monolithic or consisting of single sections with room dimensions |
| BS EN 13863-2:2003 | Concrete pavements Test method for the determination of the bond between two layers |
| BS EN 12504-3:2005 | Testing concrete in structures Determination of pull-out force |
| BS EN 12390-3:2009 | Testing hardened concrete Compressive strength of test specimens |
| BS EN 12504-4:2004 | Testing concrete Determination of ultrasonic pulse velocity |
| BS EN 13877-2:2013 | Concrete pavements Functional requirements for concrete pavements |
| EN 14488-1:2005 | Testing sprayed concrete - Sampling fresh and hardened concrete |
| EN 14488-4:2005+A1:2008 | Testing sprayed concrete - Part 4: Bond strength of cores by direct tension |
| EN 14488-6:2006 | Testing sprayed concrete - Part 6: Thickness of concrete on a substrate |
| EN 13863-3:2004 | Concrete pavements - Part 3: Test methods for the determination of the thickness of a concrete pavement from cores |
| EN 13863-2:2003 | Concrete pavements - Part 2: Test method for the determination of the bond between two layers |
| EN 13863-4:2012 | Concrete pavements - Part 4: Test methods for the determination of wear resistance of concrete pavements to studded tyres |
| EN 14488-7:2006 | Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete |
| EN 13978-1:2005 | Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions |
| EN 13877-2:2013 | Concrete pavements - Part 2: Functional requirements for concrete pavements |
| EN 13791:2007 | Assessment of in-situ compressive strength in structures and precast concrete components |
| PREN 12716 : DRAFT 2017 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - JET GROUTING |
| 02/104237 DC : DRAFT JUNE 2002 | PREN 14488-1 - TESTING SPRAYED CONCRETE - PART 1: SAMPLING FRESH AND HARDENED CONCRETE |
| UNE-EN ISO 21809-5:2018 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
| 17/30349922 DC : 0 | BS EN 13791 - ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| PREN 13791 : DRAFT 2017 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| 01/107117 DC : 0 | BS EN 13863-5 - CONCRETE PAVEMENTS - TEST METHODS - PART 5: DETERMINATION OF WEAR RESISTANCE TO STUDDED TYRES |
| UNE-EN 13369:2013 | Common rules for precast concrete products |
| 02/104240 DC : DRAFT JUNE 2002 | PREN 14488-4 - TESTING SPRAYED CONCRETE - PART 4: BOND STRENGTH OF CORES BY DIRECT TENSION |
| UNI EN 13369 : 2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| I.S. EN 13369:2018 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| XP CEN/TS 1992-4-1 : 2009 XP | DESIGN FOR FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL |
| 17/30354260 DC : 0 | BS EN 12716 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - JET GROUTING |
| UNI CEN/TS 12390-11 : 2010 | TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE, UNIDIRECTIONAL DIFFUSION |
| DIN EN 13877-2:2013-06 | Concrete pavements - Part 2: Functional requirements for concrete pavements |
| BS EN 1168 : 2005 | PRECAST CONCRETE PRODUCTS - HOLLOW CORE SLABS |
| BS EN 14488-1:2005 | Testing sprayed concrete Sampling fresh and hardened concrete |
| DIN EN 12502-3:2005-03 | PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 3: INFLUENCING FACTORS FOR HOT-DIP GALVANISED FERROUS MATERIALS |
| CEN/TS 12390-11:2010 | Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion |
| UNE-EN 1168:2006 | Precast concrete products - Hollow core slabs |
| BS EN 12390-7:2009 | Testing hardened concrete Density of hardened concrete |
| BS EN 12390-3:2009 | Testing hardened concrete Compressive strength of test specimens |
| BS EN 12350-1:2009 | Testing fresh concrete Sampling |
| EN 12390-7:2009 | Testing hardened concrete - Part 7: Density of hardened concrete |
| BS EN 206-1:2000 | Concrete Specification, performance, production and conformity |
| BS EN 1992-1-1 : 2004 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| BS EN 1992-1-2:2004 | Eurocode 2. Design of concrete structures General rules - Structural fire design |
| EN 12390-4:2000 | Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines |
| EN 12390-1:2012 | Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds |
| BS EN 12390-2:2009 | Testing hardened concrete Making and curing specimens for strength tests |
| BS EN 13791:2007 | Assessment of in-situ compressive strength in structures and pre-cast concrete components |
| BS EN 1992-2:2005 | Eurocode 2. Design of concrete structures Concrete bridges. Design and detailing rules |
| BS 6089:1981 | Guide to assessment of concrete strength in existing structures |
| EN 13791:2007 | Assessment of in-situ compressive strength in structures and precast concrete components |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.