EN 12976-2:2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Thermal solar systems and components - Factory made systems - Part 2: Test methods
Superseded date
03-04-2019
Superseded by
Published date
25-01-2017
Publisher
Sorry this product is not available in your region.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Testing
Annex A (normative) - Thermal performance
presentation sheet
Annex B (normative) - Reference conditions for
performance prediction
Annex C (informative) - Assessment of the ability of
solar DHW systems to resist the extreme climatic
conditions
Annex D (informative) - Ageing test for thermostatic
valves
Annex E (informative) - Lightning protection test
for solar heating systems
Annex F (informative) - Lightning Protection testing
sheet
Annex G (normative) - Reporting format in the
framework of the EU Regulations CDR 811,
812 and 814 dated 2013
Annex ZA (informative) - Relationship between this
European Standard and the energy labelling
requirements of Commission Delegated Regulation
(EU) No 811/2013 aimed to be covered
Annex ZB (informative) - Relationship between this
European Standard and the energy labelling
requirements of Commission Delegated Regulation
(EU) No 812/2013 aimed to be covered
Annex ZC (informative) - Relationship between this
European Standard and the ecodesign requirements
of Commission Regulation (EU) No 814/2013 aimed
to be covered
Bibliography
This European Standard specifies test methods for validating the requirements for Factory Made Thermal Solar Heating Systems as specified in EN 12976-1. The standard also includes two test methods for thermal performance characterization by means of whole system testing.
| Committee |
CEN/TC 312
|
| DevelopmentNote |
Supersedes PREN 12976-2. (01/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNI EN 12976-2:2017 | Identical |
| I.S. EN 12976-2:2017 | Identical |
| I.S. EN 12976-2:2019 | Identical |
| ONORM EN 12976-2 : 2017 | Identical |
| NBN EN 12976-2 : 2006 | Identical |
| NF EN 12976-2 : 2017 | Identical |
| PN EN 12976-2 : 2017 | Identical |
| NEN-EN 12976-2:2019 en | Identical |
| NEN EN 12976-2 : 2017 | Identical |
| UNI EN 12976-2 : 2006 | Identical |
| SN EN 12976-2 : 2017 | Identical |
| BS EN 12976-2:2017 | Identical |
| DIN EN 12976-2:2014-07 (Draft) | Identical |
| BS EN 12976-2:2019 | Identical |
| NS EN 12976-2 : 2017 | Identical |
| UNE-EN 12976-2:2006 | Identical |
| PN-EN 12976-2:2019-05 | Identical |
| DIN EN 12976-2:2018-10 (Draft) | Identical |
| UNI EN 12976-2:2019 | Identical |
| PNE-EN 12976-2 | Identical |
| DIN EN 12976-2:2006-04 | Identical |
| UNI EN 12977-4 : 2012 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES |
| DIN EN 13203-3:2010-12 | Solar supported gas-fired domestic appliances producing hot water - Appliances not exceeding 70 kW heat input and 500 litres water storage capacity - Part 3: Assessment of energy consumption |
| UNI CEN/TS 12977-4 : 2010 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES |
| PD CEN/TR 15316-6-6:2017 | Energy performance of buildings. Method for calculation of system energy performance and system efficiencies Explanation and justification of EN 15316-4-3, Module M3-8-3, M8-8-3 |
| I.S. EN 12977-4:2012 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES |
| 11/30247843 DC : 0 | BS EN 12977-2 - THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 2: TEST METHODS FOR SOLAR WATER HEATERS AND COMBISYSTEMS |
| DD CEN/TS 12977-2:2010 | Thermal solar systems and components. Custom built systems Test methods for solar water heaters and combisystems |
| S.R. CEN/TR 15316-6-6:2017 | ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY PERFORMANCE AND SYSTEM EFFICIENCIES - PART 6-6: EXPLANATION AND JUSTIFICATION OF EN 15316-4-3, MODULE M3-8-3, M8-8-3 |
| UNI EN 12977-2 : 2012 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 2: TEST METHODS FOR SOLAR WATER HEATERS AND COMBISYSTEMS |
| UNI EN 12977-1 : 2012 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS |
| S.R. CEN TS 12977-1:2010 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS |
| UNI EN 12977-3 : 2012 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 3: PERFORMANCE TEST METHODS FOR SOLAR WATER HEATER STORES |
| 10/30196950 DC : 0 | BS ISO 9459-4 - SOLAR HEATING - DOMESTIC WATER HEATING SYSTEMS - PART 4: SYSTEM PERFORMANCE CHARACTERIZATION BY MEANS OF COMPONENT TESTS AND COMPUTER SIMULATION |
| EN 13203-3:2010 | Solar supported gas-fired domestic appliances producing hot water - Appliances not exceeding 70 kW heat input and 500 litres water storage capacity - Part 3: Assessment of energy consumption |
| CEN/TS 12977-4:2010 | Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores |
| DIN EN 12976-1:2017-04 | Thermal solar systems and components - Factory made systems - Part 1: General requirements |
| 11/30247846 DC : 0 | BS EN 12977-4 - THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES |
| DD CEN/TS 12977-5:2010 | Thermal solar systems and components. Custom built systems Performance test methods for control equipment |
| DD CEN/TS 12977-1:2010 | Thermal solar systems and components. Custom built systems General requirements for solar water heaters and combisystems |
| 07/30159519 DC : 0 | BS EN 13203-3 - SOLAR SUPPORTED GAS-FIRED DOMESTIC APPLIANCES PRODUCING HOT WATER - APPLIANCES NOT EXCEEDING 70KW HEAT INPUT AND 500 LITERS WATER STORAGE CAPACITY - PART 3: ASSESSMENT OF ENERGY CONSUMPTION |
| I.S. EN 12977-2:2012 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 2: TEST METHODS FOR SOLAR WATER HEATERS AND COMBISYSTEMS |
| DIN EN 12977-5:2016-08 (Draft) | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT |
| DIN EN 12977-3:2016-08 (Draft) | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 3: PERFORMANCE TEST METHODS FOR SOLAR WATER HEATER STORES |
| I.S. EN 12977-1:2012 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS |
| S.R. CEN TS 12977-5:2010 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT |
| CEN/TR 15316-6-6:2017 | Energy performance of buildings - Method for calculation of system energy performance and system efficiencies - Part 6-6: Explanation and justification of EN 15316-4-3, Module M3-8-3, M8-8-3 |
| S.R. CEN TS 12977-2:2010 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 2: TEST METHODS FOR SOLAR WATER HEATERS AND COMBISYSTEMS |
| DIN EN 12977-2:2016-08 (Draft) | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 2: TEST METHODS FOR SOLAR WATER HEATERS AND COMBISYSTEMS |
| BS EN 12977-4:2012 | Thermal solar systems and components. Custom built systems Performance test methods for solar combistores |
| I.S. EN 12976-1:2017 | THERMAL SOLAR SYSTEMS AND COMPONENTS - FACTORY MADE SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| VDI 4708 Blatt 1:2012-07 | Pressure maintenance, venting, deaeration - Pressure maintenance |
| 11/30247849 DC : 0 | BS EN 12977-5 - THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT |
| 11/30247855 DC : 0 | BS EN 12977-3 - THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 3: PERFORMANCE TEST METHODS FOR SOLAR WATER HEATER STORES |
| DD ENV 12977-3:2001 | Thermal solar systems and components. Custom built systems Performance characterisation of stores for solar heating systems |
| 06/30156096 DC : 0 | ISO CEN TS 12977-3 - PERFORMANCE TEST METHODS - THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 3: PERFORMANCE TEST METHODS FOR SOLAR WATER HEATER STORES |
| UNI CEN/TS 12977-1 : 2010 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS |
| NF EN 13203-3 : 2010 | SOLAR SUPPORTED GAS-FIRED DOMESTIC APPLIANCES PRODUCING HOT WATER - APPLIANCES NOT EXCEEDING 70 KW HEAT INPUT AND 500 LITERS WATER STORAGE CAPACITY - PART 3: ASSESSMENT OF ENERGY CONSUMPTION |
| UNI EN 12977-5 : 2012 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT |
| EN 12977-4:2018 | Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores |
| I.S. EN 12977-5:2012 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT |
| EN 12977-2:2018 | Thermal solar systems and components - Custom built systems - Part 2: Test methods for solar water heaters and combisystems |
| EN 12977-1:2018 | Thermal solar systems and components - Custom built systems - Part 1: General requirements for solar water heaters and combisystems |
| UNE-EN 12977-3:2012 | Thermal solar systems and components - Custom built systems - Part 3: Performance test methods for solar water heater stores |
| DIN EN 12976-1:2014-07 (Draft) | THERMAL SOLAR SYSTEMS AND COMPONENTS - FACTORY MADE SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| EN 12976-1:2017 | Thermal solar systems and components - Factory made systems - Part 1: General requirements |
| UNI CEN/TS 12977-2 : 2010 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 2: TEST METHODS FOR SOLAR WATER HEATERS AND COMBISYSTEMS |
| UNI EN 13203-3 : 2010 | SOLAR SUPPORTED GAS-FIRED DOMESTIC APPLIANCES PRODUCING HOT WATER - APPLIANCES NOT EXCEEDING 70 KW HEAT INPUT AND 500 LITRES WATER STORAGE CAPACITY - PART 3: ASSESSMENT OF ENERGY CONSUMPTION |
| DIN EN 12977-1:2016-08 (Draft) | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS |
| DD CEN/TS 12977-4 : DRAFT MAY 2010 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES |
| BS EN 12977-1:2012 | Thermal solar systems and components. Custom built systems General requirements for solar water heaters and combisystems |
| BS EN 12977-5:2012 | Thermal solar systems and components. Custom built systems Performance test methods for control equipment |
| BS EN 12977-2:2012 | Thermal solar systems and components. Custom built systems Test methods for solar water heaters and combisystems |
| PREN 12977-3 : DRAFT 2011 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 3: PERFORMANCE TEST METHODS FOR SOLAR WATER HEATER STORES |
| EN 12977-5:2018 | Thermal solar systems and components - Custom built systems - Part 5: Performance test methods for control equipment |
| EN 12977-3:2018 | Thermal solar systems and components - Custom built systems - Part 3: Performance test methods for solar water heater stores |
| I.S. EN 13203-3:2010 | SOLAR SUPPORTED GAS-FIRED DOMESTIC APPLIANCES PRODUCING HOT WATER - APPLIANCES NOT EXCEEDING 70 KW HEAT INPUT AND 500 LITRES WATER STORAGE CAPACITY - PART 3: ASSESSMENT OF ENERGY CONSUMPTION |
| BS EN 12976-1:2017 | Thermal solar systems and components. Factory made systems General requirements |
| BS EN 12977-3:2012 | Thermal solar systems and components. Custom built systems Performance test methods for solar water heater stores |
| DIN EN 12977-4:2016-08 (Draft) | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES |
| 04/30113768 DC : DRAFT MAY 2004 | EN 12976-1 - THERMAL SOLAR SYSTEMS AND COMPONENTS - FACTORY MADE SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| DD ENV 12977-2:2001 | Thermal solar systems and components. Custom built systems Test methods |
| I.S. EN 12977-3:2012 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 3: PERFORMANCE TEST METHODS FOR SOLAR WATER HEATER STORES |
| 05/30140990 DC : DRAFT OCT 2005 | EN 15316-4-3 - HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-3: SPACE HEATING GENERATION SYSTEMS, THERMAL SOLAR SYSTEMS |
| UNE-EN 13203-3:2011 | Solar supported gas-fired domestic appliances producing hot water - Appliances not exceeding 70 kW heat input and 500 litres water storage capacity - Part 3: Assessment of energy consumption |
| S.R. CEN TS 12977-4:2010 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 4: PERFORMANCE TEST METHODS FOR SOLAR COMBISTORES |
| UNE-EN 12977-4:2012 | Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores |
| DIN EN 12977-5:2012-06 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT |
| CEN/TS 12977-2:2010 | Thermal solar systems and components - Custom built systems - Part 2: Test methods for solar water heaters and combisystems |
| CEN/TS 12977-1:2010 | Thermal solar systems and components - Custom built systems - Part 1: General requirements for solar water heaters and combisystems |
| CEN/TS 12977-5:2010 | Thermal solar systems and components - Custom built systems - Part 5: Performance test methods for control equipment |
| DIN EN 12977-1:2012-06 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR SOLAR WATER HEATERS AND COMBISYSTEMS |
| EN 15502-1:2012+A1:2015 | Gas-fired heating boilers - Part 1: General requirements and tests |
| ISO 9459-1:1993 | Solar heating — Domestic water heating systems — Part 1: Performance rating procedure using indoor test methods |
| ISO 9488:1999 | Solar energy Vocabulary |
| CEN/TR 16355:2012 | Recommendations for prevention of Legionella growth in installations inside buildings conveying water for human consumption |
| EN 60343:1992 | Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges |
| ISO 9459-5:2007 | Solar heating — Domestic water heating systems — Part 5: System performance characterization by means of whole-system tests and computer simulation |
| 2012/27/EU : 2012 AMD 1 2013 | DIRECTIVE 2012/27/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 25 OCTOBER 2012 ON ENERGY EFFICIENCY, AMENDING DIRECTIVES 2009/125/EC AND 2010/30/EU AND REPEALING DIRECTIVES 2004/8/EC AND 2006/32/EC (TEXT WITH EEA RELEVANCE) |
| IEC 60343:1991 | Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges |
| IEC 60734:2012 | Household electrical appliances - Performance - Water for testing |
| IEC 60335-2-21:2012 | Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters |
| EN 1717:2000 | Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow |
| ISO 6059:1984 | Water quality — Determination of the sum of calcium and magnesium — EDTA titrimetric method |
| ISO 9806:2017 | Solar energy — Solar thermal collectors — Test methods |
| AS/NZS 2712:2007 | Solar and heat pump water heaters - Design and construction (Reconfirmed 2020) |
| EN 62305-3:2011 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
| EN 60335-2-21:2003/corrigendum Oct. 2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-21: PARTICULAR REQUIREMENTS FOR STORAGE WATER HEATERS |
| EN ISO 9488:1999 | Solar energy - Vocabulary (ISO 9488:1999) |
| EN 60734:2012 | Household electrical appliances - Performance - Water for testing |
| ISO 9459-2:1995 | Solar heating — Domestic water heating systems — Part 2: Outdoor test methods for system performance characterization and yearly performance prediction of solar-only systems |
| EN 1489:2000 | Building valves - Pressure safety valves - Tests and requirements |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| IEC 62305-3:2010 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.