![header thumbnail](/images/img-default-logo.png)
EN 12982:2009
Current
The latest, up-to-date edition.
![header thumbnail](/images/img-default-logo.png)
Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves
19-08-2009
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Dimensions and tolerances
Annex A (informative) - Origin of basic series
Annex B (informative) - Relationship between DN
(nominal size) and nominal pipe size (NPS)
Bibliography
This European Standard specifies the end to end and centre to end dimensions for steel butt welding end valves with connecting dimensions of welding ends in compliance with EN 12627, used in PN and Class designated piping systems.The range of PN is:-PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400.The range of Class is:-Class 150, Class 300, Class 600, Class 900, Class 1 500, Class 2 500.The range of nominal size is:-DN 8; DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900, DN 1 000; DN 1 200.NOTE 1DN 750 is not applicable to PN designated valves.NOTE 2See Annex B for the relationship between nominal size (DN) and nominal pipe size (NPS).NOTE 3Valves having welding end profiles different from those specified in EN 12627, may use the same dimensions than those specified in Table 1.
Committee |
CEN/TC 69
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NS EN 12982 : 2009 | Identical |
NEN EN 12982 : 2009 | Identical |
NF EN 12982 : 2009 | Identical |
SN EN 12982 : 2010 | Identical |
UNI EN 12982 : 2009 | Identical |
UNE-EN 12982:2010 | Identical |
I.S. EN 12982:2009 | Identical |
NBN EN 12982 : 2009 | Identical |
BS EN 12982:2009 | Identical |
DIN EN 12982:2009-11 | Identical |
PN EN 12982 : 2009 | Identical |
13/30271601 DC : 0 | BS ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS |
BS EN 593:2017 | Industrial valves. Metallic butterfly valves for general purposes |
PREN 14141 : DRAFT 2011 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
06/30157192 DC : 0 | BS EN 736-3 - VALVES - TERMINOLOGY - PART 3: DEFINITION OF TERMS |
UNE-EN 16767:2017 | Industrial valves - Steel and cast iron check valves |
14/30301577 DC : 0 | BS EN 16767 - INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
03/118014 DC : DRAFT DEC 2003 | ISO 7121 - METAL BALL VALVES FOR GENERAL-PURPOSE INDUSTRIAL APPLICATIONS |
EN 736-3:2008 | Valves - Terminology - Part 3: Definition of terms |
DIN EN 13709:2010-10 | Industrial valves - Steel globe and globe stop and check valves |
BS EN 14141:2013 | Valves for natural gas transportation in pipelines. Performance requirements and tests |
UNE-EN 1983:2014 | Industrial valves - Steel ball valves |
BS EN 1984:2010 | Industrial valves. Steel gate valves |
DIN EN 736-3:2008-04 | Valves - Terminology - Part 3: Definition of terms |
EN 1349:2009 | Industrial process control valves |
BS EN 1349:2009 | Industrial process control valves |
PREN 13774 : DRAFT 2011 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
BS ISO 9635-1:2014 | Agricultural irrigation equipment. Irrigation valves General requirements |
16/30339483 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
09/30205883 DC : 0 | BS EN 13709 - INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
PREN 13709 : DRAFT 2009 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
PREN 1984 : DRAFT 2009 | INDUSTRIAL VALVES - STEEL GATE VALVES |
ISO 7121:2016 | Steel ball valves for general-purpose industrial applications |
I.S. EN 16767:2016 | INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
DIN EN ISO 17292:2016-05 | METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015) |
DIN EN 1984:2010-10 | Industrial valves - Steel gate valves |
ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries |
UNE-EN 14141:2014 | Valves for natural gas transportation in pipelines - Performance requirements and tests |
UNE-EN 593:2009 | Industrial valves - Metallic butterfly valves |
BS EN 13709:2002 | Industrial valves. Steel globe and globe stop and check valves |
I.S. EN 13774:2013 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
I.S. EN 736-3:2008 | VALVES - TERMINOLOGY - PART 3: DEFINITION OF TERMS |
I.S. EN 1984:2010 | INDUSTRIAL VALVES - STEEL GATE VALVES |
DIN EN 1983:2013-12 | INDUSTRIAL VALVES - STEEL BALL VALVES |
I.S. EN 14141:2013 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
I.S. EN 1983:2013 | INDUSTRIAL VALVES - STEEL BALL VALVES |
I.S. EN 1349:2009 | INDUSTRIAL PROCESS CONTROL VALVES |
I.S. EN 13709:2010 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
I.S. EN ISO 17292:2015 | METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015) |
UNI EN 1349 : 2010 | INDUSTRIAL PROCESS CONTROL VALVES |
I.S. EN 593:2017 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
11/30243885 DC : 0 | BS EN 13774 - VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
09/30205877 DC : 0 | BS EN 1984 - INDUSTRIAL VALVES - STEEL GATE VALVES |
05/30138208 DC : DRAFT AUG 2005 | ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS |
08/30187521 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES |
PREN 12516-4 : DRAFT 2011 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
15/30322555 DC : 0 | BS ISO 7121 - STEEL BALL VALVES FOR GENERAL-PURPOSE INDUSTRIAL APPLICATIONS |
DIN EN 16767 E : 2016 | INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
11/30249111 DC : 0 | BS EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
ISO 9635-1:2014 | Agricultural irrigation equipment Irrigation valves Part 1: General requirements |
DIN EN 14141:2013-08 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
BS EN 1074-1:2000 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests General requirements |
UNI EN 1983 : 2013 | INDUSTRIAL VALVES - STEEL BALL VALVES |
UNI EN 13774 : 2013 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
UNI EN 14141 : 2013 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
UNI EN 736-3 : 2008 | VALVES - TERMINOLOGY - PART 3: DEFINITION OF TERMS |
UNI EN 1984 : 2010 | INDUSTRIAL VALVES - STEEL GATE VALVES |
UNI EN 13709 : 2010 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
BS ISO 7121:2016 | Steel ball valves for general-purpose industrial applications |
PREN 593 : DRAFT 2016 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
08/30179182 DC : DRAFT MAY 2008 | BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES |
DIN EN 13774:2013-05 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
UNE-EN ISO 17292:2016 | Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015) |
BS EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements |
BS EN ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries |
EN 16767:2016 | Industrial valves - Steel and cast iron check valves |
BS EN 14341:2006 | Industrial valves. Steel check valves |
BS EN 13397:2002 | Industrial valves. Diaphragm valves made of metallic materials |
UNE-EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
BS EN 1983:2013 | Industrial valves. Steel ball valves |
EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
EN 13709:2010 | Industrial valves - Steel globe and globe stop and check valves |
EN ISO 17292:2015 | METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015) |
EN 1983:2013 | Industrial valves - Steel ball valves |
EN 14141:2013 | Valves for natural gas transportation in pipelines - Performance requirements and tests |
EN 1984:2010 | Industrial valves - Steel gate valves |
EN 593:2017 | Industrial valves - Metallic butterfly valves for general purposes |
EN 14341:2006 | Industrial valves - Steel check valves |
I.S. EN 14341:2006 | INDUSTRIAL VALVES - STEEL CHECK VALVES |
14/30299749 DC : 0 | BS EN ISO 17292 - METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES |
11/30248438 DC : 0 | BS EN 14141 - VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
BS EN 16767:2016 | Industrial valves. Steel and cast iron check valves |
DIN EN 16767:2016-08 | INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
DIN EN 13397:2002-03 | INDUSTRIAL VALVES - DIAPHRAGM VALVES MADE OF METALLIC MATERIALS |
BS EN 736-3:2008 | Valves. Terminology Definition of terms |
EN 13397:2001 | Industrial valves - Diaphragm valves made of metallic materials |
EN 1074-1:2000 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements |
NFE 29 377 : 1986 | INDUSTRIAL VALVES - METALLIC WAFER CHECK VALVES WITH ANGULAR DISPLACEMENT OBTURATOR - SPECIFICATIONS |
NFE 29 470 : 1989 | INDUSTRIAL VALVES - STEEL BALL VALVES - SPECIFICATIONS |
ASME B16.10 : 2017 | FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES |
EN 558:2017 | Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves |
NFE 29 305-2 : 1988 | ROBINETTERIE INDUSTRIELLE - APPAREILS DE ROBINETTERIE UTILISES DANS LES TUYAUTERIES A BRIDES - DIMENSIONS FACE A FACE - SERIES FR |
EN 736-2:2016 | Valves - Terminology - Part 2: Definition of components of valves |
DIN 3202-1:1984-09 | FACE-TO-FACE AND CENTRE-TO-FACE DIMENSIONS - FLANGED VALVES |
IEC 60534-3-2:2001 | Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves |
EN 60534-3-2:2001 | Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves |
DIN 3202-2:1982-04 | END-TO-END AND CENTRE-TO-END DIMENSIONS OF VALVES - WELD-ON VALVES |
DIN 3202-3:1979-10 | FACE-TO-FACE DIMENSIONS OF WAFER TYPE VALVES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.