EN 13141-7:2010

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings

Available format(s):

Superseded date: 26-04-2021

Language(s):

Published date: 03-11-2010

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and classification
4 Symbols and abbreviations
5 Requirements
6 Test methods
7 Test results
Annex A (informative) - Example of some possible arrangements
of heat recovery heat exchanger and/or heat pumps for
category I
Annex B (normative) - Pressure leakage test method
Annex C (normative) - Tracer gas test method
Bibliography

Abstract - (Show below) - (Hide below)

This part of EN 13141 specifies the laboratory test methods and test requirements for the testing of aerodynamic, thermal and acoustic performance, and the electrical performance characteristic of a mechanical supply and exhaust ventilation units used in a single dwelling.It covers unit that contain at least, within one or more casing:-supply and exhaust air fans;-air filters;-air-to-air heat exchanger and/or Extract Air-to-Outdoor Air heat pump for extract air heat recovery;-control system.Such unit can be provided in more than one assembly, the separate assemblies of which are designed to be used together.The different possible arrangements of heat recovery heat exchangers and/or heat pumps are described in Annex A.This standard does not deal with non-ducted units or reciprocating heat exchangers. This standard does not deal with units that supply several dwellings.This standard does not cover ventilation systems that may also provide water space heating and hot water.This standard does not cover units including combustion engine driven compression heat pumps and absorption heat pumps.Electrical safety requirements are given in EN 60335-2-40 and EN 60335-2-80.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 156
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Superseded
Superseded By	EN 13141-7:2021

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DIN EN 13141-7:2011-01	Identical
BS EN 13141-7:2010	Identical
NS EN 13141-7 : 2010	Identical
SN EN 13141-7 : 2010	Identical
SS-EN 13141-7:2010	Identical
UNI EN 13141-7 : 2011	Identical
PN EN 13141-7 : 2010	Identical
UNE-EN 13141-7:2011	Identical
NBN EN 13141-7 : 2010	Identical
NEN EN 13141-7 : 2010	Identical
NF EN 13141-7 : 2011	Identical
I.S. EN 13141-7:2010	Identical
ONORM EN 13141-7 : 2010	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

EN 13142:2013	Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics
12/30259182 DC : 0	BS EN 13142 - VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS
I.S. EN 13141-11:2015	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS
I.S. EN 16798-5-1:2017	ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 5-1: CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION AND AIR CONDITIONING SYSTEMS (MODULES M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - METHOD 1: DISTRIBUTION AND GENERATION
UNE-EN 13141-11:2015	Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units
EN 16798-5-2:2017	Energy performance of buildings - Ventilation for buildings - Part 5-2: Calculation methods for energy requirements of ventilation systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 2: Distribution and generation
UNI EN 13142 : 2013	VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS
DIN EN 13141-6:2015-02	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING
I.S. EN 13141-6:2014	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING
EN 13141-11:2015	Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units
EN 12354-5:2009/AC:2010	BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT
I.S. EN 12354-5:2009	BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT
BS EN 15241:2007	Ventilation for buildings. Calculation methods for energy losses due to ventilation and infiltration in buildings
BS EN 16573:2017	Ventilation for Buildings. Performance testing of components for residential buildings. Multifunctional balanced ventilation units for single family dwellings, including heat pumps
DIN EN 16798-5-2 E : 2017	ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 5-2: CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION SYSTEMS (MODULES M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - METHOD 2: DISTRIBUTION AND GENERATION
13/30267124 DC : 0	BS EN 13141-11 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: POSITIVE PRESSURE VENTILATION SYSTEMS
DIN EN 13141-11 E : 2015	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS
I.S. EN 16573:2017	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS FOR RESIDENTIAL BUILDINGS - MULTIFUNCTIONAL BALANCED VENTILATION UNITS FOR SINGLE FAMILY DWELLINGS, INCLUDING HEAT PUMPS
DIN EN 15241:2011-06	VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS
DIN EN 16798-5-2:2015-06 (Draft)	ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 5-2: CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION SYSTEMS (MODULES M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - METHOD 2: DISTRIBUTION AND GENERATION
PREN 13142 : DRAFT 2012	VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS
I.S. EN 16798-5-2:2017	ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 5-2: CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION SYSTEMS (MODULES M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - METHOD 2: DISTRIBUTION AND GENERATION
DIN EN 12354-5:2009-10	Building acoustics - Estimation of acoustic performance of building from the performance of elements - Part 5: Sounds levels due to the service equipment
I.S. EN 13142:2013	VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS
13/30275116 DC : 0	BS EN 16573 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS FOR RESIDENTIAL BUILDINGS - MULTIFUNCTIONAL BALANCED VENTILATION UNITS FOR SINGLE FAMILY DWELLINGS, INCLUDING HEAT PUMPS
I.S. EN 15241:2007	VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS
DIN EN 13142:2013-06	Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics
BS EN 13142:2013	Ventilation for buildings. Components/products for residential ventilation. Required and optional performance characteristics
UNI EN 12354-5 : 2009	BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT
BS EN 13141-11:2015	Ventilation for buildings. Performance testing of components/products for residential ventilation Supply ventilation units
BS EN 16798-5-2:2017	Energy performance of buildings. Ventilation for buildings Calculation methods for energy requirements of ventilation systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8). Method 2: Distribution and generation
DIN EN 15241 E : 2011	VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS
EN 16798-5-1:2017	Energy performance of buildings - Ventilation for buildings - Part 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 1: Distribution and generation
BS EN 12354-5:2009	Building acoustics. Estimation of acoustic performance of building from the performance of elements Sounds levels due to the service equipment
UNE-EN 13141-6:2015	Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling
EN 16573:2017	Ventilation for Buildings - Performance testing of components for residential buildings - Multifunctional balanced ventilation units for single family dwellings, including heat pumps
EN 15241:2007/AC:2011	VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS
DIN EN 13141-11:2015-07	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS
BS EN 16798-5-1:2017	Energy performance of buildings. Ventilation for buildings Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8). Method 1: Distribution and generation
11/30234297 DC : 0	BS EN 13142 - VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS
BS EN 13141-6:2014	Ventilation for buildings. Performance testing of components/products for residential ventilation Exhaust ventilation system packages used in a single dwelling
DIN EN 16798-5-2:2017-11	ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 5-2: CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION SYSTEMS (MODULES M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - METHOD 2: DISTRIBUTION AND GENERATION
EN 13141-6:2014	Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling

Standards Referencing This Book - (Show below) - (Hide below)

EN 60335-2-40:2003/A13:2012/AC:2013	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
EN ISO 5136:2009	Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)
ISO 3744:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
EN ISO 3743-2:2009	Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)
ISO 3743-2:1994	Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms
EN ISO 5135 : 1998	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE FROM AIR-TERMINAL DEVICES, AIR-TERMINAL UNITS, DAMPERS AND VALVES BY MEASUREMENT IN A REVERBERATION ROOM
ISO 9614-1:1993	Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points
EN 12102:2013	Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level
EN 12792:2003	Ventilation for buildings - Symbols, terminology and graphical symbols
EN 60335-2-80:2003/A2:2009	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS
EN ISO 3741:2010	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010)
IEC 60335-2-40:2013+AMD1:2016 CSV	Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditionersand dehumidifiers
IEC 60335-2-80:2015 RLV	Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans
ISO 9614-2:1996	Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning
EN ISO 3745:2012/A1:2017	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012/AMD 1:2017)
EN 13142:2013	Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics
EN 306:1997	Heat exchangers - Methods of measuring the parameters necessary for establishing the performance
EN 13141-4:2011	Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems
ISO 5135:1997	Acoustics Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
EN ISO 3744:2010	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
EN ISO 9614-2 : 1996	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 2: MEASUREMENT BY SCANNING
EN ISO 3743-1:2010	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)
ISO 3741:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms
ISO 3745:2012	Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms
ISO 5136:2003	Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method
EN ISO 9614-1:2009	Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993)
ISO 3743-1:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart