• Shopping Cart
    There are no items in your cart

EN 13370:2003

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Characterization of waste - Analysis of eluates - Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN-, F-

Superseded date

01-11-2011

Superseded by

EN 16192:2011

Published date

04-06-2003

Sorry this product is not available in your region.

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Sample pre-treatment
5 Blank determination
6 Interference
7 Selection of the suitable test method
8 Expression of results
9 Test report
Annex A (informative) Validation of EN 13370
      A.1 General
      A.2 Interlaboratory study
      A.3 Selection of Laboratories
      A.4 Selection of samples
      A.5 Validation scope
      A.6 Results and statistics
      A.7 Conclusion
Bibliography

This European Standard specifies methods for the determination of the parameters Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN-, F- in aqueous eluates for the characterization of waste.

Committee
CEN/TC 292
DevelopmentNote
Supersedes ENV 13370. (06/2003)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

Standards Relationship
PN EN 13370 : 2006 Identical
I.S. EN 13370:2003 Identical
NF EN 13370 : 2004 Identical
SN EN 13370 : 2003 Identical
BS EN 13370:2003 Identical
NEN EN 13370 : 2003 Identical
NBN EN 13370 : 2003 Identical
UNE-EN 13370:2004 Identical
DIN EN 13370:2003-09 Identical
UNI EN 13370 : 2004 Identical
NS EN 13370 : 1ED 2003 Identical

I.S. EN 12506:2003 CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF PH, AS, BA, CD, CL[-], CO, CR, CR (6), CU, MO, NI, NO[2-], PB, TOTAL S, SO[4][2-], V AND ZN
PD CEN/TR 16376:2012 Characterization of waste. Overall guidance document for characterization of waste from the extractive industries
08/30185788 DC : DRAFT OCT 2008 BS EN 15864 - CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH CONTINUOUS LEACHANT RENEWAL UNDER CONDITIONS RELEVANT FOR SPECIFIED SCENARIO(S)
DD CEN/TS 14997:2006 Characterization of waste. Leaching behaviour tests. Influence of pH on leaching with continuous pH-control
DIN EN 12506:2003-09 CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF PH, AS, BA, CD, CI[-], CO, CR, CR(VI), CU, MO, NI, NO[2-], PB, TOTAL S, SO[4][2-], V AND ZN
EN 12506:2003 Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr Vl, Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn
CEN/TR 16376:2012 Characterization of waste - Overall guidance document for characterization of waste from the extractive industries
CEN/TS 16384:2012 Synthetic sport systems - Leaching test
CEN/TR 16184:2011 Characterization of Waste - State-of-the-art document - Analysis of eluates
CEN/TS 14405 : 2004 CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS)
10/30233988 DC : 0 BS EN 16192 - CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES
08/30185782 DC : DRAFT OCT 2008 BS EN 15862 - CHARACTERIZATION OF WASTE - COMPLIANCE LEACHING TEST - ONE STAGE BATCH LEACHING TEST FOR MONOLITHS AT A FIXED LIQUID TO SURFACE AREA RATIO (L/A) FOR TEST PORTIONS WITH FIXED MINIMUM DIMENSIONS
DD CEN/TS 14429:2005 Characterization of waste. Leaching behaviour tests. Influence of pH on leaching with initial acid/base addition
I.S. CEN TS 14429:2005 CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION
S.R. CEN/TR 16376:2012 CHARACTERIZATION OF WASTE - OVERALL GUIDANCE DOCUMENT FOR CHARACTERIZATION OF WASTE FROM THE EXTRACTIVE INDUSTRIES
BS EN 16192:2011 Characterization of waste. Analysis of eluates
I.S. CEN TS 14405:2004 CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS)
I.S. EN 16192:2011 CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES
UNE-CEN/TR 16184:2011 IN Characterization of Waste - State-of-the-art document - Analysis of eluates
BS EN 12506:2003 Characterization of waste. Analysis of eluates. Determination of pH, As, Ba, Cd, Cl<sup>-</sup>, Co, Cr, Cr VI, Cu, Mo, Ni, NO<sub>2</sub><sup>-</sup>, Pb, total S, SO<sub>4</sub><sup>2-</sup>, V and Zn
PD CEN/TS 16384:2012 Synthetic sport systems. Leaching test
DIN EN 16192:2012-02 Characterization of waste - Analysis of eluates
08/30185785 DC : DRAFT OCT 2008 BS EN 15863 - CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED TEST CONDITIONS
UNI CEN/TS 16384 : 2012 SYNTHETIC SPORT SYSTEMS - LEACHING TEST
DD CEN/TS 14405:2004 Characterization of waste. Leaching behaviour tests. Up-flow percolation test (under specified conditions)
S.R. CEN/TR 16184:2011 CHARACTERIZATION OF WASTE - STATE-OF-THE-ART DOCUMENT - ANALYSIS OF ELUATES
I.S. CEN TS 14997:2006 CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH-CONTROL
S.R. CEN/TS 16384:2012 SYNTHETIC SPORT SYSTEMS - LEACHING TEST
04/30116791 DC : DRAFT JUL 2004 BS EN 15002 - CHARACTERISATION OF WASTE - PREPARATION OF TEST PORTIONS FROM LABORATORY SAMPLE
UNE-EN 16192:2012 Characterization of waste - Analysis of eluates
UNI EN 16192 : 2012 CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES
CEN/TS 14429:2005 Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with initial acid/base addition
CEN/TS 14997:2006 Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with continuous pH-control

ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
EN ISO 14403:2002 Water quality - Determination of total cyanide and free cyanide by continuous flow analysis (ISO 14403:2002)
ISO 14402:1999 Water quality Determination of phenol index by flow analysis (FIA and CFA)
EN 12457-2:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
EN 1483:2007 Water quality - Determination of mercury - Method using atomic absorption spectrometry
EN 27888:1993 Water quality - Determination of electrical conductivity (ISO 7888:1985)
EN ISO 11732:2005 Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005)
ISO/TR 13530:1997 Water quality Guide to analytical quality control for water analysis
EN 1484:1997 Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC)
ISO 5725-3:1994 Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method
ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values
EN 12457-4:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
ISO 10304-1:2007 Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
ISO 5667-3:2012 Water quality Sampling Part 3: Preservation and handling of water samples
ISO 6703-2:1984 Water quality — Determination of cyanide — Part 2: Determination of easily liberatable cyanide
ISO 6439:1990 Water quality — Determination of phenol index — 4-Aminoantipyrine spectrometric methods after distillation
ISO 10359-1:1992 Water quality — Determination of fluoride — Part 1: Electrochemical probe method for potable and lightly polluted water
ENV ISO 13530:1998 Water quality - Guide to analytical quality control for water analysis (ISO/TR 13530:1997)
EN 12457-1:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 14403:2002 Water quality Determination of total cyanide and free cyanide by continuous flow analysis
EN ISO 5667-3:2012 Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012)
EN 12457-3:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)
EN 12506:2003 Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr Vl, Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn
ISO 7150-1:1984 Water quality — Determination of ammonium — Part 1: Manual spectrometric method
ISO 5725-5:1998 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
EN ISO 14402:1999 Water quality - Determination of phenol index by flow analysis (FIA and CFA)(ISO 14402:1999)
EN ISO 10304-1:2009 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007)
EN 1485 : 1996 WATER QUALITY - DETERMINATION OF ADSORBABLE ORGANICALLY BOUND HALOGENS (AOX)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.