EN 1396:2015
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
Withdrawn date
31-10-2015
Published date
01-04-2015
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Technical conditions for inspection and delivery
5 Mechanical properties
6 Organic coating properties
7 Inspection documents
8 Marking
9 Packing
10 Arbitration tests
Annex A (normative) - Rules for rounding
Annex B (informative) - Examples of coating systems
Annex C (informative) - Guidelines for organic
coatings
Annex D (informative) - Guidelines for storage
and subsequent processing
Bibliography
This European Standard specifies the particular requirements for wrought aluminium and wrought aluminium alloys in the form of coil coated sheet and strip for general applications. This product is generally supplied in thicknesses up to 3,0 mm.It applies to cold-rolled aluminium and aluminium alloy strip coated by the coil coating process both with liquid as well as with powder paints, either in the final width or slit afterwards, and to sheet obtained from such strip.It does not apply to coil coated sheet and strip used for special applications such as cans, closures and lids which are dealt with in separate EN 541.
| Committee |
CEN/TC 132
|
| DevelopmentNote |
Supersedes PREN 1396. (04/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| ONORM EN 1396 : 2015 | Identical |
| DS EN 1396 : 2015 | Identical |
| NS EN 1396 : 1996 | Identical |
| NEN EN 1396 : 2015 | Identical |
| SN EN 1396 : 2015 | Identical |
| BS EN 1396:2007 | Identical |
| UNI EN 1396 : 2007 | Identical |
| UNE-EN 1396:2015 | Identical |
| PN EN 1396 : 2015 | Identical |
| DIN EN 1396:2015-06 | Identical |
| I.S. EN 1396:2015 | Identical |
| NBN EN 1396 : 2015 | Identical |
| NF EN 1396 : 2015 | Identical |
| NS-EN 1396:2015 | Identical |
| BS EN 1396:2015 | Identical |
| PREN 13523-21 : DRAFT 2016 | COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS |
| 03/309850 DC : DRAFT JUNE 2003 | EN 13523-24 - COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING |
| UNI EN 13523-19 : 2011 | COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING |
| 15/30329701 DC : 0 | BS EN 13523-1 - COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
| 15/30329698 DC : 0 | BS EN 13523-27 - COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST) |
| 12/30268955 DC : 0 | BS EN 13523-3 - COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON |
| BS EN 13523-4:2014 | Coil coated metals. Test methods Pencil hardness |
| FD CEN/TR 16239 : 2011 FD | INSTALLATION RULES OF FIBROUS (GYPSUM) PLASTER WORKS |
| BS EN 1090-5:2017 | Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| 08/30188882 DC : DRAFT DEC 2008 | BS EN 13523-29 - COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPPING) |
| PREN 13523-13 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT |
| 12/30268970 DC : 0 | BS EN 13523-25 - COIL COATED METALS - TEST METHODS - PART 25: RESISTANCE TO HUMIDITY |
| 03/309845 DC : DRAFT JUNE 2003 | EN 13523-12 - COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING |
| 03/309846 DC : DRAFT JUNE 2003 | EN 13523-16 - COIL COATED METALS - TEST METHODS - PART 16: RESISTANCE TO ABRASION |
| PREN 13523-10 : DRAFT 2015 | COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION |
| BS EN 16074:2011 | Paints and varnishes. Determination of non-volatile matter content and spreading rate of coil coating materials |
| DIN EN 1999-1-4:2010-05 | Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting (includes Corrigendum AC:2009) |
| DIN EN 13523-29:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING) |
| I.S. EN 13523-27:2017 | COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST) |
| UNE-EN 1090-5:2017 | Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| UNE-EN 13523-29:2017 | Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping) |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| I.S. EN 508-2:2008 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELFSUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
| I.S. EN 573-3:2013 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS |
| DIN EN 13523-15:2015-09 | Coil coated metals - Test methods - Part 15: Metamerism |
| BS EN 13523-18:2002 | Coil coated metals. Test methods Resistance to staining |
| BS EN 13523-13:2014 | Coil coated metals. Test methods Resistance to accelerated ageing by the use of heat |
| BS EN 13523-20:2011 | Coil coated metals. Test methods Foam adhesion |
| BS EN 13523-2:2014 | Coil coated metals. Test methods Gloss |
| BS EN 13523-8:2017 | Coil coated metals. Test methods Resistance to salt spray (fog) |
| UNE-EN 13523-25:2014 | Coil coated metals - Test methods - Part 25: Resistance to humidity |
| BS EN 13523-24:2017 | Coil coated metals. Test methods Resistance to blocking and pressure marking |
| BS EN 13523-11:2011 | Coil coated metals. Test methods Resistance to solvents (rubbing test) |
| BS EN 13964:2014 | Suspended ceilings. Requirements and test methods |
| DIN EN 14782:2006-03 | Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
| UNI EN 13523-3 : 2014 | COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON |
| EN 13523-23:2015 | Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide |
| EN 13523-24:2017 | Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking |
| EN 13523-17:2011 | Coil coated metals - Test methods - Part 17: Adhesion of strippable films |
| EN 13523-0:2014 | Coil coated metals - Test methods - Part 0: General introduction |
| DIN EN 508-2:2009-07 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
| DIN EN 1090-5:2017-07 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| EN 13523-5:2014 | Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test) |
| EN 13523-26:2014 | Coil coated metals - Test methods - Part 26: Resistance to condensation of water |
| EN 13523-9:2014 | Coil coated metals - Test methods - Part 9: Resistance to water immersion |
| DIN EN 13523-22:2017-05 | Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
| DIN EN 13523-1:2017-05 | Coil coated metals - Test methods - Part 1: Film thickness |
| EN 13523-13:2014 | Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat |
| EN 13523-11:2011 | Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test) |
| EN 13523-14:2014 | Coil coated metals - Test methods - Part 14: Chalking (Helmen method) |
| EN 13523-12:2017 | Coil coated metals - Test methods - Part 12: Resistance to scratching |
| EN 13523-29:2017 | Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping) |
| EN 13523-4:2014 | Coil coated metals - Test methods - Part 4: Pencil hardness |
| EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
| 12/30268952 DC : 0 | BS EN 13523-0 - COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION AND LIST OF TEST METHODS |
| 15/30329710 DC : 0 | BS EN 13523-29 - COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING) |
| 03/309849 DC : DRAFT JUNE 2003 | EN 13523-20 - COIL COATED METALS - TEST METHODS - PART 20: FOAM ADHESION |
| 13/30266550 DC : 0 | BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| 03/309848 DC : DRAFT JUNE 2003 | EN 13523-19 - COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING |
| PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| 12/30268976 DC : 0 | BS EN 13523-4 - COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS |
| 12/30268967 DC : 0 | BS EN 13523-14 - COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD) |
| I.S. EN 13523-29:2017 | COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING) |
| DIN EN 13523-4:2014-10 | COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS |
| UNE-EN 13523-27:2017 | Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test) |
| 02/105004 DC : DRAFT JULY 2002 | PREN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING SANDWICH PANELS - FACTORY MADE PRODUCTS - SPECIFICATION |
| PREN 13523-8 : DRAFT 2016 | COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
| DIN EN 14509:2013-12 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| BS EN 13523-29:2017 | Coil coated metals. Test methods Resistance to environmental soiling (Dirt pick-up and striping) |
| 12/30268958 DC : 0 | BS EN 13523-5 - COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
| 01/101336 DC : DRAFT JAN 2001 | PREN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| 14/30291744 DC : 0 | BS EN 13523-23 - COIL COATED METALS - TEST METHODS - PART 23: RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE |
| PREN 13523-20 : DRAFT 2010 | COIL COATED METALS - TEST METHODS - PART 20: FOAM ADHESION |
| PREN 13523-3 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON |
| PREN 13523-4 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS |
| I.S. EN 16074:2011 | PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS |
| PREN 13523-0 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION AND LIST OF TEST METHODS |
| PREN 13523-7 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST) |
| I.S. EN 1999-1-4:2007 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING (INCLUDING IRISH NATIONAL ANNEX) |
| DIN EN 13523-22:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON |
| DIN EN 13523-26:2014-08 | Coil coated metals - Test methods - Part 26: Resistance to condensation of water |
| DIN EN 13523-16:2005-02 | Coil coated metals - Test methods - Part 16: Resistance to abrasion |
| DIN EN 13523-10:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION |
| DIN EN 13523-17:2012-02 | COIL COATED METALS - TEST METHODS - PART 17: ADHESION OF STRIPPABLE FILMS |
| DIN EN 14782:2015-09 (Draft) | SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| BS EN ISO 1514:2004 | Paints and varnishes. Standard panels for testing |
| UNE-EN 13523-2:2014 | Coil coated metals - Test methods - Part 2: Gloss |
| BS EN 13523-16:2004 | Coil coated metals. Test methods Resistance to abrasion |
| BS EN 14782:2006 | Self-supporting metal sheet for roofing, external cladding and internal lining. Product specification and requirements |
| BS EN 13523-1:2017 | Coil coated metals. Test methods Film thickness |
| EN 13523-20:2011 | Coil coated metals - Test methods - Part 20: Foam adhesion |
| UNE-EN 13523-11:2012 | Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test) |
| I.S. EN 13523-7:2014 | COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST) |
| I.S. EN 485-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| I.S. EN 612:2005 | EAVES GUTTERS WITH BEAD STIFFENED FRONTS AND RAINWATER PIPES WITH SEAMED JOINTS MADE OF METAL SHEET |
| I.S. EN 13523-5:2014 | COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
| I.S. EN 13523-23:2015 | COIL COATED METALS - TEST METHODS - PART 23: RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE |
| I.S. EN 13523-25:2014 | COIL COATED METALS - TEST METHODS - PART 25: RESISTANCE TO HUMIDITY |
| I.S. EN 13523-21:2017 | COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS |
| I.S. EN 13523-8:2017 | COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
| I.S. EN 13523-13:2014 | COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT |
| I.S. EN 13523-12:2017 | COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING |
| I.S. EN 13523-1:2017 | COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
| DIN EN 13523-11:2011-09 | COIL COATED METALS - TEST METHODS - PART 11: RESISTANCE TO SOLVENTS (RUBBING TEST) |
| I.S. EN 13523-2:2014 | COIL COATED METALS - TEST METHODS - PART 2: GLOSS |
| I.S. EN 13523-3:2014 | COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON |
| I.S. EN 13523-15:2015 | COIL COATED METALS - TEST METHODS - PART 15: METAMERISM |
| I.S. EN 13523-10:2017 | COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION |
| I.S. EN ISO 1514:2016 | PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING (ISO 1514:2016) |
| I.S. EN 13964:2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13523-26:2014 | COIL COATED METALS - TEST METHODS - PART 26: RESISTANCE TO CONDENSATION OF WATER |
| I.S. EN 13523-22:2017 | COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON |
| I.S. EN 13523-14:2014 | COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD) |
| I.S. EN 13523-24:2017 | COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING |
| I.S. EN 13523-9:2014 | COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION |
| I.S. EN 13523-0:2014 | COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION |
| EN 13523-3:2014 | Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison |
| 16/30340560 DC : 0 | BS EN 13523-8 - COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
| 07/30168407 DC : DRAFT DEC 2007 | BS EN 508-2 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
| 12/30268964 DC : 0 | BS EN 13523-9 - COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION |
| PREN 14782 : DRAFT 2015 | SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| DIN EN 13523-21:2016-07 (Draft) | COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS |
| 07/30165574 DC : DRAFT DEC 2007 | BS EN 13523-27 - COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTRICE (CATAPLASM TEST) |
| PD ISO/TS 16688:2017 | Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications |
| UNI EN 13523-17 : 2012 | COIL COATED METALS - TEST METHODS - PART 17: ADHESION OF STRIPPABLE FILMS |
| 15/30329707 DC : 0 | BS EN 13523-22 - COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON |
| DIN EN 13523-27:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST) |
| 08/30186451 DC : DRAFT OCT 2008 | BS EN 573-3 - ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS |
| DIN EN 13523-24:2016-07 (Draft) | COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING |
| BS EN 14509:2013 | Self-supporting double skin metal faced insulating panels. Factory made products. Specifications |
| PREN 13523-24 : DRAFT 2016 | COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING |
| PREN 507 : DRAFT 2017 | ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED PRODUCTS OF ALUMINIUM SHEET |
| CEN/TR 16239:2011 | Installation rules of fibrous (gypsum) plaster works |
| UNI EN 16074 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS |
| PREN 13523-23 : DRAFT 2014 | COIL COATED METALS - TEST METHODS - PART 23: RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE |
| I.S. EN 13523-11:2011 | COIL COATED METALS - TEST METHODS - PART 11: RESISTANCE TO SOLVENTS (RUBBING TEST) |
| PREN 14509 : DRAFT 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| PREN 13523-1 : DRAFT 2015 | COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
| BS EN 13523-27:2017 | Coil coated metals. Test methods Resistance to humid poultice (Cataplasm test) |
| PREN 13523-5 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
| UNI EN 1999-1-4 : 2011 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING |
| I.S. EN 14509:2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| DIN EN 573-5:2007-11 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products |
| DIN EN 13523-12:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING |
| DIN EN 13523-19:2011-09 | COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING |
| DIN EN 573-3:2013-12 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS |
| DIN EN 13523-14:2014-08 | Coil coated metals - Test methods - Part 14: Chalking (Helmen method) |
| DIN EN 612:2005-04 | Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet |
| DIN EN 13523-0:2014-08 | Coil coated metals - Test methods - Part 0: General introduction |
| DIN EN 13523-2:2014-08 | Coil coated metals - Test methods - Part 2: Gloss |
| DIN EN 13523-3:2014-08 | Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison |
| DIN EN 13964:2014-08 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| UNE-EN 14509:2014 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
| BS EN 612:2005 | Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet |
| BS EN 13523-15:2015 | Coil coated metals. Test methods Metamerism |
| UNE-EN 13523-10:2017 | Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation |
| UNE-EN 13523-4:2014 | Coil coated metals - Test methods - Part 4: Pencil hardness |
| UNE-EN 13523-3:2014 | Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison |
| UNE-EN 13523-19:2011 | Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing |
| I.S. EN 13523-6:2002 | COIL COATED METALS - TEST METHODS - PART 6: ADHESION AFTER INDENTATION (CUPPING TEST) |
| UNE-EN 13523-17:2012 | Coil coated metals - Test methods - Part 17: Adhesion of strippable films |
| I.S. EN 13523-18:2002 | COIL COATED METALS - TEST METHODS - PART 18: RESISTANCE TO STAINING |
| UNI EN 13523-20 : 2012 | COIL COATED METALS - TEST METHODS - PART 20: FOAM ADHESION |
| EN 13523-6:2002 | Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test) |
| I.S. EN 13523-20:2011 | COIL COATED METALS - TEST METHODS - PART 20: FOAM ADHESION |
| EN 13523-18:2002 | Coil coated metals - Test methods - Part 18: Resistance to staining |
| EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| EN 13964:2014 | Suspended ceilings - Requirements and test methods |
| UNI EN 14509 : 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| UNI EN 573-3 : 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS |
| UNI EN 13523-4 : 2014 | COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS |
| UNI EN 13523-14 : 2014 | COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD) |
| UNI EN 13523-13 : 2014 | COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT |
| UNI EN 13964 : 2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| UNI EN 13523-5 : 2014 | COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
| UNI EN 508-2 : 2008 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
| 03/309844 DC : DRAFT JUNE 2003 | EN 13523-11 - COIL COATED METALS - TEST METHODS - PART 11: RESISTANCE TO SOLVENTS (RUBBING TEST) |
| 08/30188879 DC : DRAFT DEC 2008 | BS EN 13523-8 - COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
| 14/30266796 DC : 0 | BS EN ISO 1514 - PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING |
| 15/30329704 DC : 0 | BS EN 13523-10 - COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION |
| 08/30173308 DC : DRAFT MAY 2008 | BS EN 13523-1 - COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
| 14/30291747 DC : 0 | BS EN 13523-15 - COIL COATED METALS - TEST METHODS - PART 15: METAMERISM |
| ONORM EN 508-2 : 2008 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
| PREN 13523-12 : DRAFT 2015 | COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING |
| PREN 13523-9 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION |
| 17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| I.S. EN 13523-19:2011 | COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING |
| UNI EN 13523-11 : 2011 | COIL COATED METALS - TEST METHODS - PART 11: RESISTANCE TO SOLVENTS (RUBBING TEST) |
| DIN EN 13523-13:2014-08 | COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT |
| DIN EN 13523-23:2015-09 | Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide |
| DIN EN 13523-25:2014-08 | Coil coated metals - Test methods - Part 25: Resistance to humidity |
| DIN EN 13523-7:2014-08 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
| DIN EN 485-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| DIN EN 13523-5:2014-08 | Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test) |
| DIN EN 13523-1:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
| DIN EN 13523-9:2014-08 | Coil coated metals - Test methods - Part 9: Resistance to water immersion |
| BS EN 13523-5:2014 | Coil coated metals. Test methods Resistance to rapid deformation (impact test) |
| BS EN 13523-12:2017 | Coil coated metals. Test methods Resistance to scratching |
| BS EN 13523-6:2002 | Coil coated metals. Test methods Adhesion after indentation (cupping test) |
| BS EN 13523-22:2017 | Coil coated metals. Test methods Colour difference. Visual comparison |
| BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| UNE-EN 573-3:2014 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| UNE-EN ISO 1514:2017 | Paints and varnishes - Standard panels for testing (ISO 1514:2016) |
| BS EN 13523-25:2014 | Coil coated metals. Test methods Resistance to humidity |
| UNE-EN 13523-9:2014 | Coil coated metals - Test methods - Part 9: Resistance to water immersion |
| UNE-EN 508-2:2010 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium |
| UNE-EN 16074:2011 | Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials |
| BS EN 13523-21:2017 | Coil coated metals. Test methods Evaluation of outdoor exposed panels |
| BS EN 508-2:2008 | Roofing products from metal sheet. Specification for self supporting products of steel, aluminium or stainless steel sheet Aluminium |
| UNE-EN 13523-21:2017 | Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels |
| BS EN 13523-3:2014 | Coil coated metals. Test methods Colour difference. Instrumental comparison |
| DIN EN 15088:2016-09 (Draft) | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German and English version prEN 15088:2016 |
| BS EN 573-3:2013 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products |
| UNE-EN 13523-24:2017 | Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking |
| BS EN 13523-17:2011 | Coil coated metals. Test methods Adhesion of strippable films |
| BS EN 15088:2005 | Aluminium and aluminium alloys. Structural products for construction works. Technical conditions for inspection and delivery |
| BS EN 13523-26:2014 | Coil coated metals. Test methods Resistance to condensation of water |
| UNE-EN 13523-23:2015 | Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide |
| UNE-EN 13523-12:2017 | Coil coated metals - Test methods - Part 12: Resistance to scratching |
| UNE-EN 13523-20:2012 | Coil coated metals - Test methods - Part 20: Foam adhesion |
| UNE-EN 13523-1:2017 | Coil coated metals - Test methods - Part 1: Film thickness |
| UNE-EN 485-1:2017 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| UNE-EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
| DIN EN 13523-27:2009-10 | COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST) |
| UNI EN 13523-26 : 2014 | COIL COATED METALS - TEST METHODS - PART 26: RESISTANCE TO CONDENSATION OF WATER |
| EN 508-2:2008 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium |
| EN 15088:2005 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery |
| EN 612:2005 | Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet |
| UNI EN 13523-9 : 2014 | COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION |
| EN 14509:2013 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
| UNI EN 13523-25 : 2014 | COIL COATED METALS - TEST METHODS - PART 25: RESISTANCE TO HUMIDITY |
| EN 507:1999 | Roofing products from metal sheet - Specification for fully supported roofing products of aluminium sheet |
| EN ISO 1514:2016 | Paints and varnishes - Standard panels for testing (ISO 1514:2016) |
| EN 14782:2006 | Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
| EN 573-5:2007 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products |
| EN 16074:2011 | Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials |
| EN 13523-21:2017 | Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels |
| PD CEN/TR 16239:2011 | Installation rules of fibrous (gypsum) plaster works |
| PREN 13523-2 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 2: GLOSS |
| 16/30340563 DC : 0 | BS EN 13523-24 - COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING |
| 12/30268961 DC : 0 | BS EN 13523-7 - COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST) |
| 12/30268973 DC : 0 | BS EN 13523-2 - COIL COATED METALS - TEST METHODS - PART 2: GLOSS |
| DIN EN 13523-8:2016-07 (Draft) | COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
| 15/30329713 DC : 0 | BS EN 13523-12 - COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING |
| 03/309847 DC : DRAFT JUNE 2003 | EN 13523-17 - COIL COATED METALS - TEST METHODS - PART 17: ADHESION OF STRIPPABLE FILMS |
| 12/30268979 DC : 0 | BS EN 13523-26 - COIL COATED METALS - TEST METHODS - PART 26: RESISTANCE TO CONDENSATION OF WATER |
| BS EN 1999-1-4 : 2007 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING |
| 10/30228227 DC : 0 | BS EN 13523-20 - COIL COATED METALS - TEST METHODS - PART 20: FOAM ADHESION |
| 13/30217369 DC : 0 | BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| 12/30268982 DC : 0 | BS EN 13523-13 - COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT |
| 04/30125694 DC : DRAFT NOV 2004 | EN 15088 - ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| 16/30340557 DC : 0 | BS EN 13523-21 - COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS |
| ISO/TS 16688:2017 | Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications |
| I.S. EN 13523-4:2014 | COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS |
| DIN EN 16074:2011-09 | PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS |
| PREN 13964 : DRAFT 2013 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| PREN 13523-29 : DRAFT 2015 | COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING) |
| I.S. EN 13523-17:2011 | COIL COATED METALS - TEST METHODS - PART 17: ADHESION OF STRIPPABLE FILMS |
| BS EN 13523-19:2011 | Coil coated metals. Test methods Panel design and method of atmospheric exposure testing |
| 17/30356149 DC : 0 | BS EN 508-2 - ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
| 17/30360664 DC : 0 | BS EN 507 - ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED PRODUCTS OF ALUMINIUM SHEET |
| I.S. EN 1090-5:2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| PREN 13523-27 : DRAFT 2015 | COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST) |
| DIN EN 13523-20:2012-02 | COIL COATED METALS - TEST METHODS - PART 20: FOAM ADHESION |
| UNE-EN 13964:2016 | Suspended ceilings - Requirements and test methods |
| UNE-EN 13523-22:2017 | Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
| BS EN 13523-9:2014 | Coil coated metals. Test methods Resistance to water immersion |
| BS EN 13523-14:2014 | Coil coated metals. Test methods Chalking (Helmen method) |
| BS EN 507:2000 | Roofing products from metal sheet. Specification for fully supported roofing products of aluminium sheet |
| BS EN 13523-7:2014 | Coil coated metals. Test methods Resistance to cracking on bending (T-bend test) |
| UNE-EN 13523-15:2015 | Coil coated metals - Test methods - Part 15: Metamerism |
| BS EN 13523-0:2014 | Coil coated metals. Test methods General introduction |
| BS EN 13523-10:2017 | Coil coated metals. Test methods Resistance to fluorescent UV radiation and water condensation |
| BS EN 573-5:2007 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Codification of standardized wrought products |
| BS EN 13523-23:2015 | Coil coated metals. Test methods Resistance to humid atmospheres containing sulfur dioxide |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| EN 13523-27:2017 | Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test) |
| EN 13523-7:2014 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
| EN 13523-2:2014 | Coil coated metals - Test methods - Part 2: Gloss |
| EN 13523-1:2017 | Coil coated metals - Test methods - Part 1: Film thickness |
| EN 1090-5:2017 | Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| EN 13523-16:2004 | Coil coated metals - Test methods - Part 16: Resistance to abrasion |
| EN 13523-22:2017 | Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
| EN 13523-19:2011 | Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing |
| EN 13523-15:2015 | Coil coated metals - Test methods - Part 15: Metamerism |
| UNI EN 13523-2 : 2014 | COIL COATED METALS - TEST METHODS - PART 2: GLOSS |
| UNI EN 13523-7 : 2014 | COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST) |
| EN 13523-25:2014 | Coil coated metals - Test methods - Part 25: Resistance to humidity |
| DIN EN 13523-29:2017-05 | Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping) |
| DIN EN 15088:2006-03 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German version EN 15088:2005 |
| UNI EN 13523-0 : 2014 | COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION |
| DIN EN 13523-10:2017-05 | Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation |
| EN 13523-10:2017 | Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation |
| NS-EN 573-3:2019+A2:2023 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| EN ISO 4628-2:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
| EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| ISO 6272-2:2011 | Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter |
| EN 13523-10:2017 | Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 13523-6:2002 | Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test) |
| ISO 4623-2:2016 | Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates |
| ISO 6270-1:1998 | Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation |
| EN 485-4:1993 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products |
| ASTM D 660 : 1993 | Standard Test Method for Evaluating Degree of Checking of Exterior Paints |
| ISO 1520:2006 | Paints and varnishes Cupping test |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 13523-3:2014 | Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison |
| EN ISO 7253 : 2001 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
| EN ISO 4628-4:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016) |
| EN 13523-21:2017 | Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels |
| ISO 4628-4:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking |
| EN 12258-1:2012 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
| ISO 7253:1996 | Paints and varnishes — Determination of resistance to neutral salt spray (fog) |
| EN 13523-22:2017 | Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
| ISO 4628-5:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
| EN 541:2006 | Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications |
| EN ISO 4628-6:2011 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011) |
| EN 3665:1997 | Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys |
| EN 515:2017 | Aluminium and aluminium alloys - Wrought products - Temper designations |
| EN ISO 1520:2006 | Paints and varnishes - Cupping test (ISO 1520:2006) |
| EN 13523-19:2011 | Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing |
| EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
| ISO 6272-1:2011 | Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter |
| EN 13523-7:2014 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
| EN 13523-1:2017 | Coil coated metals - Test methods - Part 1: Film thickness |
| ISO 4628-6:2011 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
| ISO 1519:2011 | Paints and varnishes Bend test (cylindrical mandrel) |
| EN ISO 6272-2:2011 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011) |
| EN ISO 1519:2011 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
| EN ISO 4628-5:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
| EN 13523-4:2014 | Coil coated metals - Test methods - Part 4: Pencil hardness |
| EN 13523-2:2014 | Coil coated metals - Test methods - Part 2: Gloss |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| EN ISO 6272-1:2011 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.