EN 14870-2:2004

Current

Current The latest, up-to-date edition.

Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified)

Available format(s):

Language(s):

Published date: 15-12-2004

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Explanatory Note
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Designation
6 Pressure rating and design
   6.1 General
   6.2 Tees and headers
   6.3 Extruded outlet headers
7 Information to be supplied by the purchaser
   7.1 Principal information
   7.2 Supplementary information
8 Manufacturing
   8.1 Manufacturing procedure specification
   8.2 Starting material
   8.3 Fitting manufacture
9 Testing and inspection
   9.1 General requirements
   9.2 Extent of testing and inspection
   9.3 Chemical composition
   9.4 Mechanical testing
   9.5 Non-destructive testing
   9.6 Dimensions
   9.7 Gauging
   9.8 Hydrostatic testing
10 Inspection document
11 Marking
Annex A (normative) Design calculations
Annex B (normative) Proof test
Annex ZA (normative) Normative references to international
         publications with their corresponding European publications
Bibliography

Abstract - (Show below) - (Hide below)

This part of prEN 14870 specifies the technical delivery conditions for unalloyed or low alloy steel seamless and welded pipeline fittings for use in pipeline transportation systems for the petroleum and natural gas industries as defined in ISO 13623.This part of prEN 14870 is applicable to welding-end fittings such as elbows, caps, tees, single or multiple extruded headers, reducers, and transition sections made from seamless and welded pipe of unalloyed or low-alloy steels.This part of prEN 14870 specifies three classes of fitting corresponding to increasing quality requirements in accordance with the technical delivery conditions of ISO 3183 for pipe as indicated in Table 1.Table 1 - Fitting class and corresponding pipe standardFitting classCorresponding pipe standardClass AISO 3183-1Class BISO 3183-2Class CISO 3183-3This part of prEN 14870 is not applicable to the selection of the fitting class.This part of prEN 14870 is not applicable to the materials for, or the attachment of, factory-welded extensions.On-land supply systems used by the gas supply industry are excluded from the scope of this standard.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 12
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
BS EN 14870-2:2004	Identical
UNE-EN 14870-2:2004	Identical
NS EN 14870-2 : 1ED 2005	Identical
I.S. EN 14870-2:2005	Identical
NF EN 14870-2 : 2005	Identical
NBN EN 14870-2 : 2005	Identical
UNI EN 14870-2 : 2005	Identical
PN EN 14870-2 : 2007	Identical
SN EN 14870-2 : 2006	Identical
DIN EN 14870-2:2005-11	Identical
NEN EN 14870-2 : 2005	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN EN 1993-4-3:2010-12	EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
DIN EN 1594:2013-12	GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
I.S. EN 1594:2013	GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
I.S. EN 1993-4-3:2007	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
PREN 1594 : DRAFT 2013	GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
BS EN 1594:2013	Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
BS EN 1993-4-3:2007	Eurocode 3. Design of steel structures Pipelines
UNI EN 1993-4-3 : 2007	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
UNI EN 1594 : 2013	GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
BS EN 14870-3:2006	Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Flanges
UNE-EN 1594:2014	Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
EN 1993-4-3:2007/AC:2009	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
EN 14870-3:2006	Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges (ISO 15590-3:2004, modified)
EN 1594:2013	Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
13/30271116 DC : 0	BS EN 1594 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS

Standards Referencing This Book - (Show below) - (Hide below)

ISO 6507-1:2005	Metallic materials Vickers hardness test Part 1: Test method
ASME PV CODE 9 : 2017	BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
ISO 9712:2012	Non-destructive testing Qualification and certification of NDT personnel
ISO 148-2:2016	Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
EN ISO 377:2017	Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
ISO 4885:2017	Ferrous materials Heat treatments Vocabulary
ASME B31.8 : 2016	Gas Transmission and Distribution Piping Systems
ISO 6892:1998	Metallic materials Tensile testing at ambient temperature
ISO 783:1999	Metallic materials Tensile testing at elevated temperature
ISO 3183-2:1996	Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B
EN ISO 2566-1:1999	Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
ISO 11496:1993	Seamless and welded steel tubes for pressure purposes Ultrasonic testing of tube ends for the detection of laminar imperfections
ISO/TR 7705:1991	Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications
ISO 15614-1:2017	Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
ISO 7438:2016	Metallic materials Bend test
ISO 15156-2:2015	Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
EN ISO 15156-2:2015	Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015)
ISO 13664:1997	Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube ends for the detection of laminar imperfections
ISO 3834-2:2005	Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements
ISO 148:1983	Steel — Charpy impact test (V-notch)
ISO 2566-1:1984	Steel Conversion of elongation values Part 1: Carbon and low alloy steels
ISO 148-3:2016	Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ISO 10474:2013	Steel and steel products — Inspection documents
ISO 3183-1:1996	Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A
ISO 3545-3:1989	Steel tubes and fittings — Symbols for use in specifications — Part 3: Tubular fittings with circular cross-section
MSS SP 75 : 2014	HIGH-STRENGTH, WROUGHT, BUTT-WELDING FITTINGS
ASME B16.9 : 2012	FACTORY-MADE WROUGHT BUTTWELDING FITTINGS
ASTM E 709 : 2015 : REDLINE	Standard Guide for Magnetic Particle Testing
EN ISO 8501-1:2007	Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007)
ISO 377:2017	Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
EN 14161:2011+A1:2015	Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified)
ISO 12096:1996	Submerged arc-welded steel tubes for pressure purposes Radiographic testing of the weld seam for the detection of imperfections
ISO 13623:2017	Petroleum and natural gas industries — Pipeline transportation systems
ISO 12095:1994	Seamless and welded steel tubes for pressure purposes Liquid penetrant testing
EN 287-1:2011	Qualification test of welders - Fusion welding - Part 1: Steels
EN ISO 7438:2016	Metallic materials - Bend test (ISO 7438:2016)

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart