• There are no items in your cart

ASME PV CODE 9 : 2017

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS

Available format(s)

Hardcopy

Superseded date

02-07-2019

Language(s)

English

Published date

01-01-2017

List of Sections
Foreword
Statement of Policy on the Use of the Certification
 Mark and Code Authorization in Advertising
Statement of Policy on the Use of ASME Marking
 to Identify Manufactured Items
Submittal of Technical Inquiries to the Boiler
 and Pressure Vessel Standards Committees
Personnel
Introduction
Summary of Changes
List of Changes in Record Number Order
Cross-Referencing and Stylistic Changes in the
 Boiler and Pressure Vessel Code
Part QG - General Requirements
Part QW - Welding
Article I - Welding General Requirements
Article II - Welding Procedure Qualifications
Article III - Welding Performance Qualifications
Article IV - Welding Data
Article V - Standard Welding Procedure
            Specifications (SWPSs)
Part QB - Brazing
Article XI - Brazing General Requirements
 Article XII - Brazing Procedure Qualifications
 Article XIII - Brazing Performance Qualifications
 Article XIV - Brazing Data
 Part QF - Plastic Fusing
 Article XXI - Plastic Fusing General Requirements
 Article XXII - Fusing Procedure Qualifications
 Article XXIII - Plastic Fusing Performance
                 Qualifications
 Article XXIV - Plastic Fusing Data
 Nonmandatory Appendix B - Welding and Brazing
                           Forms
 Nonmandatory Appendix D - P-Number Listing
 Mandatory Appendix E - Permitted SWPSs
 Mandatory Appendix F - Standard Units for Use in
                        Equations
 Nonmandatory Appendix G - Guidance for the Use
                           of U.S. Customary and SI Units
                           in the ASME Boiler and Pressure
                           Vessel Code
 Nonmandatory Appendix H - Waveform Controlled
                           Welding
 Mandatory Appendix J - Guideline for Requesting
                        P-Number Assignments for Base Metals
                        Not Listed in Table QW/QB-422
 Nonmandatory Appendix K - Guidance on Invoking
                           Section IX Requirements in Other
                           codes,Standards, Specifications,
                           and contract Documents
 Nonmandatory Appendix L - Welders and Welding
                           Operators Qualified Under ISO
                           9606-1:2012 and ISO 14732-2013

Provides mandatory requirements, specific prohibitions, and nonmandatory guidance for construction activities and inservice inspection and testing activities.

DocumentType
Standard
Pages
405
PublisherName
American Society of Mechanical Engineers
Status
Superseded
SupersededBy
Supersedes

API 7NRV : 2006 SPECIFICATION FOR DRILL STRING NON-RETURN VALVES
API TR 18TR4 : 2017 EVALUATION OF WELDING REQUIREMENTS AS APPLICABLE TO API PRODUCT SPECIFICATIONS
EN ISO 16904:2016 Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016)
API 15S : 2016 SPOOLABLE REINFORCED PLASTIC LINE PIPE
API STD 541 : 2014 FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
API 676 : 2009 : R2015 POSITIVE DISPLACEMENT PUMPS - ROTARY
MIL-A-52100 Revision C:1992 ADAPTERS: FOR BRIDGE, FLOATING, ALUMINUM, HIGHWAY-TYPE, DECK-BALK SUPERSTRUCTURE ON PNEUMATIC FLOATS
API STD 602 : 2015+ERR 1 : 2016 GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
API 674 : 2010(R2016) POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 685 : 2011 SEALLESS CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL, AND GAS INDUSTRY PROCESS SERVICE
AWS D14.4/D14.4M : 2012 SPECIFICATION FOR THE DESIGN OF WELDED JOINTS IN MACHINERY AND EQUIPMENT
API 53 : 2012 BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS
API 2SC : 2010 MANUFACTURE OF STRUCTURAL STEEL CASTINGS FOR PRIMARY OFFSHORE APPLICATIONS
API 570 : 2016 PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS
API 5LCP :2006 SPECIFICATION FOR COILED LINE PIPE
API 600 CHINESE : 2015 STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS
AWS D14.5/D14.5M:2009 SPECIFICATION FOR WELDING OF PRESSES AND PRESS COMPONENTS
API 612 : 2014 PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS
AWWA D100 : 2011 WELDED CARBON STEEL TANKS FOR WATER STORAGE
MIL-PRF-83830 Revision C:2014 TRUCK, FORKLIFT, ROUGH TERRAIN, DIESEL ENGINE DRIVEN, 25,000 POUND CAPACITY AT A 48 INCH LOAD CENTER
EN ISO 17078-2:2007/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS
AWS D10.12M/D10.12:2000 GUIDE FOR WELDING MILD STEEL PIPE
EN 14870-2:2004 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified)
PIP RFTA1000 : 2009(R2017) REFRACTORY ANCHOR AND ACCESSORY INSTALLATION QUALIFICATION, INSPECTION, AND TESTING
CEN/TR 14633:2003 Welding - Working positions - Comparison of current international, European and US designations
MIL-A-11210 Revision G:1981 AIR CONDITIONERS: BASE MOUNTED, SELF-CONTAINED, MULTIPACKAGE-TYPE, AIR-COOLED, ELECTRIC-MOTOR-DRIVEN, 18,000 - BTU/HR
UNI EN ISO 28781 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT
EN ISO 13628-15:2011 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds (ISO 13628-15:2011)
GGG-L-795 Revision E:1990 LUBRICATING UNIT, POWER OPERATED, AND PUMPING UNITS, PRESSURE LUBRICATING, DRUM MOUNTING
MIL-STD-372 Base Document:1988 WELDING, GAS METAL-ARC AND GAS TUNGSTEN-ARC, ALUMINUM ALLOYS, READILY WELDABLE FOR STRUCTURES, EXCLUDING ARMOR
MSS SP 75 : 2014 HIGH-STRENGTH, WROUGHT, BUTT-WELDING FITTINGS
ANSI/AWWA C200 : 2017 STEEL WATER PIPE, 6 IN. (150 MM) AND LARGER
ANSI/AWWA C561 : 2014 FABRICATED STAINLESS-STEEL SLIDE GATES
EN ISO 13628-7:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005)
MIL-B-53107 Base Document:1990 BRIDGE, LIGHT ASSAULT 23 METER SPAN
MIL-C-13962 Revision B:1966 CRUSHING, SCREENING, AND WASHING PLANTS, DIESEL-ENGINE AND ELECTRIC-MOTOR DRIVEN, 225-TONS PER HOUR
MIL-E-52714 Revision C:1992 EQUIPMENT, CABLE REINFORCEMENT FOR PANEL BRIDGE M-2 (BAILEY TYPE)
API 602 RUSSIAN : 2009 STEEL GATE, GLOBE, AND CHECK VALVES FOR SIZES NPS 4 (DN 100) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
API 538 : 2015 INDUSTRIAL FIRED BOILERS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
API 5LCP CHINESE : 2007 SPECIFICATION FOR COILED LINE PIPE
MIL-PRF-53051 Revision C:2017 PUMPING ASSEMBLIES, WHEEL-MOUNTED, DIESEL ENGINE DRIVEN, BULK TRANSFER, FUEL AND POTABLE WATER PUMPING SERVICE
MIL-DTL-14522 Revision E:2010 COMPONENTS, PREFABRICATED STRONG ROOM, PORTABLE: FOR SMALL ARMS AND EQUIPMENT
API 945 : 2003 : R2008 AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS
API RP 1114 : 2013 RECOMMENDED PRACTICE FOR THE DESIGN OF SOLUTION-MINED UNDERGROUND STORAGE FACILITIES
API TR 938-C : 2015 USE OF DUPLEX STAINLESS STEELS IN THE OIL REFINING INDUSTRY
API 6DSS : 2017-08 SPECIFICATION FOR SUBSEA PIPELINE VALVES
API 573 : 2013 INSPECTION OF FIRED BOILERS AND HEATERS
MIL-DTL-53077 Revision A:2011 MOUNTING KIT: M1, ROLLER, MINE CLEARING TRACK-WIDTH, TANK MOUNTED
MIL-R-52807 Revision B:1991 ROLLER, TRANSOM, BAILEY BRIDGE
EN ISO 13628-10:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006)
MIL-DTL-53078 Revision A:2011 MOUNTING KIT: M1 TANK CLEARED LANE MARKING SYSTEM (CLAMS)
MIL-A-52435 Revision D:1984 AIR CONDITIONER: BASE MOUNTED, AIR-COOLED, 208-VOLT, 3-PHASE, 50- AND 60-HERTZ AC, SINGLE- PACKAGE, 36,000 BTU/HR
MIL-A-52767 Revision D:1989 AIR CONDITIONER: VERTICAL AND HORIZONTAL, COMPACT
ANSI/AWWA D107-16 ERR 1(CSV) COMPOSITE ELEVATED TANKS FOR WATER STORAGE
ANS 57.9 : 1992(R2000) DESIGN CRITERIA FOR AN INDEPENDENT SPENT FUEL STORAGE INSTALLATION (DRY TYPE)
API 616 : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
ANSI Z223.1 : 2018 NATIONAL FUEL GAS CODE
MIL-T-17600 Revision D:1968 TURBINE, STEAM, PROPULSION NAVAL SHIPBOARD
API 619 : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
API TR 938-B : 2008 USE OF 9CR-1MO-V (GRADE 91) STEEL IN THE OIL REFINING INDUSTRY
API 19G4 : 2011 PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT
API 613:2003 SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
MIL-C-13874 Revision K:1992 COMPRESSORS, RECIPROCATING AND ROTARY, AIR, ELECTRIC MOTOR DRIVEN
MIL-A-52424 Revision B:1984 AIR CONDITIONERS: WALL- OR BASE-MOUNTED, SELF-CONTAINED, MULTIPACKAGE, STANDARD WEIGHT, AIR-COOLED, 6,000-BTU/HR
API 677 : 2006 : R2010 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
API 650 CHINESE : 2013 WELDED TANKS FOR OIL STORAGE
API 5DP CHINESE : 2009 SPECIFICATION FOR DRILL PIPE
API SPEC 17J : 2014 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
MIL-T-12442 Revision D:1992 TOWER, CABLE ANCHOR
MIL-A-52628 Revision B:1977 ANCHOR, PROPELLANT EMBEDDED
AWWA C226 : 2013 STAINLESS-STEEL FITTINGS FOR WATERWORKS SERVICE, SIZES 1/2 IN. THROUGH 72 IN. (13 MM THROUGH 1,800 MM)
AWS D3.6M : 2010 UNDERWATER WELDING CODE
AWS C7.1M/C7.1 : 2013 RECOMMENDED PRACTICES FOR ELECTRON BEAM WELDING AND ALLIED PROCESSES
EN ISO 14998:2013 Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013)
MIL-B-13207 Revision D:1976 BODY, VAN, VEHICLE-MOUNTED, GENERAL SPECIFICATION FOR
ASME AG-1 : 2019 CODE ON NUCLEAR AIR AND GAS TREATMENT
MIL-A-52568 Revision C:1982 AIR CONDITIONER, TRAILER MOUNTED, ELECTRIC-MOTOR DRIVEN, 18,000 BTU/HR
ASME B16.34 : 2017 VALVES - FLANGED, THREADED, AND WELDING END
AWS WHC2.05 : 0 WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 5: FLUX CORED ARC WELDING
API 677 :2006 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
API SPEC 12D : 2017 SPECIFICATION FOR FIELD-WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS
API 674 : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
EN ISO 13628-3:2000 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000)
AWS D3.7 : 2004 GUIDE FOR ALUMINUM HULL WELDING
MIL-C-52037 Revision F:1990 COMPRESSOR UNIT, RECIPROCATING, POWER DRIVEN, AIR, 15 CFM 3,500 PSI
NACE SP 02 92 : 2012 INSTALLATION OF THIN METALLIC WALLPAPER LINING IN AIR POLLUTION CONTROL AND OTHER PROCESS EQUIPMENT
AWS D15.1/D15.1M : 2012 RAILROAD WELDING SPECIFICATION FOR CARS AND LOCOMOTIVES
AWS G2.5/G2.5M : 2012 GUIDE FOR THE FUSION WELDING OF ZIRCONIUM AND ZIRCONIUM ALLOYS
EEMUA 164 : 1993 SEAL-LESS CENTRIFUGAL PUMPS - CLASS 1
MIL-L-51050 Revision B:1971 LABORATORY, PETROLEUM,SEMITRAILER MOUNTED
MIL-PRF-32181 Revision B:2015 TRUCK, FORKLIFT, 4,000 AND 6,200 POUND CAPACITY, LOADING, INTERNAL COMBUSTION ENGINE
EEMUA 176 : 1998 SPECIFICATION FOR STRUCTURAL CASTINGS FOR USE OFFSHORE
EN ISO 10438-2:2007 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems (ISO 10438-2:2007)
MIL-A-516 Revision J:1981 AUGER, EARTH, SKIDMOUNTED; AND AUGER, EARTH, TURNTABLE BASE MOUNTED, POWER DRIVEN
EN ISO 14693:2003 Petroleum and natural gas industries - Drilling and well-servicing equipment (ISO 14693:2003)
MIL-B-13157 Revision C:1980 BRIDGE, FIXED: PANEL, SINGLE LANE, ALUMINUM
NFPA 99C : 2005 GAS AND VACUUM SYSTEMS
MIL-C-13899 Revision F:1985 COMPRESSOR UNIT, ROTARY: AIR, WHEELBARROW-FRAME-MOUNTED, TWO PNEUMATIC TIRES, GASOLINE-ENGINE-DRIVEN, 60-CFM, 6.5-PSIG
DEFSTAN 02-770(PT1)/3(2010) : 2010 REQUIREMENTS FOR THE WELDING AND FABRICATION OF HIGH STRENGTH STEELS - PART 1: GENERAL
API TR 934-G : 2016 DESIGN, FABRICATION, OPERATIONAL EFFECTS, INSPECTION, ASSESSMENT, AND REPAIR OF COKE DRUMS AND PERIPHERAL COMPONENTS IN DELAYED COKING UNITS
API 611 : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
DEFSTAN 02-770(PT1)/2(2005) : 2005 REQUIREMENTS FOR THE WELDING AND FABRICATION OF HIGH STRENGTH STEELS - PART 1: GENERAL
API 16R RUSSIAN : 2010 SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS
API 16R : 1997 : R2010 SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS
API 16C CHINESE : 1993 SPECIFICATION FOR CHOKE AND KILL SYSTEMS
API 19V : 2013 SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT
API 577 : 2013 WELDING PROCESSES, INSPECTION, AND METALLURGY
API 5LCP RUSSIAN : 2012 SPECIFICATION FOR COILED LINE PIPE
MIL-C-14500 Revision C:1985 CRADLE, BOAT, STEEL
API 5C6 : 2006 PIPE WITH WELDED CONNECTORS
API SPEC 19TT : 2016 SPECIFICATION FOR DOWNHOLE WELL TEST TOOLS AND RELATED EQUIPMENT
API 934-C : 2008 MATERIALS AND FABRICATION OF 1 [1/4]CR-[1/2]MO STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-PRESSURE HYDROGEN SERVICE OPERATING AT OR BELOW 825 DEGREES F (441 DEGREES C)
MIL-K-52338 Revision B:1991 KEEPER ASSEMBLY, CABLEWAY, MEDIUM
API 74 : 2001 : R2007 RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION
API 682 : 2014 PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
API 7K CHINESE : 2010 DRILLING AND WELL SERVICING EQUIPMENT
API 5LCP : 2006 : INC : ERR 1 : 2007 : R2012 SPECIFICATION FOR COILED LINE PIPE
API 582 : 2016 WELDING GUIDELINES FOR THE CHEMICAL, OIL, AND GAS INDUSTRIES
API 11D2 : 2010 PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS
API STD 600 : 2015 STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS
API 677 : 2006 : R2016 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
API 683 : 1993 QUALITY IMPROVEMENT MANUAL FOR MECHANICAL EQUIPMENT IN PETROLEUM, CHEMICAL, AND GAS INDUSTRIES
API 682 CHINESE : 2014 PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
PIP VESLP001 : 2012 LOW-PRESSURE, WELDED VESSEL SPECIFICATION
API 17G : 2006 : R2011 RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS
API 674 : 2010 : INC : ERR 1 : 2015 : R2016 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 5LD : 2017 CRA CLAD OR LINED STEEL PIPE
API 16AR : 2017 STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT
API 11V1 :1995 SPECIFICATION FOR GAS LIFT EQUIPMENT
API STD 17F : 2017 SUBSEA PRODUCTION CONTROL SYSTEMS
EN ISO 10434:2004 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (ISO 10434:2004)
MSS SP 99 : 2016 INSTRUMENT VALVES
AWS WHC4.05 : 0 MATERIALS AND APPLICATION - PART 1 - WELDING HANDBOOK, 9TH EDITION, VOLUME 4 - CHAPTER 5: STAINLESS AND HEAT-RESISTANT STEELS
API 6A : 2010 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
MIL-S-10385 Revision F:1979 SANDTRAP ASSEMBLY [FOR PORTABLE 6 INCH PETROLEUM PIPELINE
ANSI/AWWA C300 : 2016 REINFORCED CONCRETE PRESSURE PIPE, STEEL - CYLINDER TYPE
EN ISO 16070:2005 Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005)
EN ISO 13628-4:2010/AC:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT
EN ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009)
EN ISO 10423:2009 Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009)
EN ISO 17078-1:2004/A1:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
MIL T 0022238 : J TANK, LIQUID STORAGE, METAL, FOR PETROLEUM PRODUCTS
MIL-T-425 Revision J:1994 TUBE, STEEL: PIPELINE SECTION; WITH GROOVED NIPPLE WELDED ON EACH END
EN ISO 13533:2001/AC:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT
MIL-DTL-62749 Revision A:2010 BRIDGE, FIXED: ALUMINUM, HIGHWAY, UNITED KINGDOM, MEDIUM GIRDER AND ERECTION, AND TRANSPORTATION EQUIPMENT, FULLY COMPETITIVE COMPONENTS FOR
MIL-C-13522 Revision C:1966 CRUSHER, JAW, ROCK, AIRBORNE, 15-TPH CAPACITY
EN ISO 10432:2004 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004)
MIL-B-2213 Revision D:1992 BRIDGE CONVERSION SET, FIXED BRIDGE: BAILEY; CONSTRUCTION OF ONE PANEL CRIB PIER, 31 FEET 7 INCHES HIGH, 145-TON
MIL-A-52679 Revision B:1983 ANCHOR, SURFACING MEMBRANE: 12 INCH
MIL-PRF-12732 Revision F:2010 HYPOCHLORINATION UNIT, WATER PURIFICATION, FRAME MOUNTED, AUTOMATICALLY CONTROLLED 2 TO 350 GPM FLOW
API 6D :2015 SPECIFICATION FOR PIPELINE AND PIPING VALVES
AWS D14.3/D14.3M : 2010 SPECIFICATION FOR WELDING EARTHMOVING, CONSTRUCTION, AND AGRICULTURAL EQUIPMENT
MIL-H-11511 Revision G:1980 HEATER, SPACE, MULTIFUEL, WITH BLOWER 60,000 BTU/HR
UNE-EN ISO 16904:2016 Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016)
PIP VESAC001 : 2016 AIR-COOLED HEAT EXCHANGER SPECIFICATION (SUPPLEMENT TO API STD 661, 7TH EDITION)
EN ISO 15136-1:2009 Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009)
MIL-P-53065 Base Document:1986 PUMPING UNIT, FRAME MOUNTED, 1-1/2 INCH, ELECTRIC MOTOR DRIVEN, 35 GPM AT 25 FEET TOTAL HEAD
MIL-A-0052767 Revision E:1994 AIR CONDITIONERS: VERTICAL AND HORIZONTAL, COMPACT
API 594 : 2017 CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING
PIP VESEH001 : 2016 ELECTRIC IMMERSION PROCESS HEATER SPECIFICATION
API std 602 : 2015 GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
AWS C5.7 : 2000 RECOMMENDED PRACTICES FOR ELECTROGAS WELDING
API SPEC 17E : 2017 SPECIFICATION FOR SUBSEA UMBILICALS
API 674 : 2010 : ERR 2 : 2015 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
AWS B5.4 : 2005 SPECIFICATION FOR THE QUALIFICATION OF WELDER TEST FACILITIES
MSS SP 42 : 2013 CORROSION-RESISTANT GATE, GLOBE, ANGLE, AND CHECK VALVES WITH FLANGED AND BUTT WELD ENDS (CLASSES 150, 300, & 600)
MIL STD 1693 : A NOTICE 2 FABRICATION WELDING AND INSPECTION OF HYPERBARIC CHAMBERS AND OTHER CRITICAL LAND BASED STRUCTURES
NACE SP 04 72 : 2015 METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS
AWWA C562 : 2014 FABRICATED ALUMINUM SLIDE GATES
API 16A CHINESE : 2004 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
API 674 : 2010 : ERR 1 : 2014 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
MIL-S-11716 Revision D:1993 SUPERSTRUCTURE, STEEL, FOR BRIDGE, FLOATING, PNEUMATIC FLOAT, CLASS 60
API 11V1 : 1995 : R2008 SPECIFICATION FOR GAS LIFT EQUIPMENT
MIL-B-13164 Revision A:1973 BRIDGE, FIXED, STEEL, HIGHWAY, SEMIPERMANENT, 90-FOOT TRUSS SPAN
API 17G : 2006 : R2016 RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS
API 6A REDLINE : 2010 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
EEMUA 182 : 2004 SPECIFICATION FOR INTEGRAL BLOCK AND BLEED VALVE MANIFOLDS FOR DIRECT CONNECTION TO PIPEWORK
MIL-C-52464 Revision C:1992 CYLINDER ASSEMBLIES, ACTUATING, LINEAR: HYDRAULIC FOR BRIDGE AND BRIDGE LAUNCHER
EN ISO 14723:2009 Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2009)
EN 13942:2009/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
API 5LC : 2015 CRA LINE PIPE
API 1111 : 2015 DESIGN, CONSTRUCTION, OPERATION, AND MAINTENANCE OF OFFSHORE HYDROCARBON PIPELINES (LIMIT STATE DESIGN)
AWS WHC4.10 : 0 MATERIALS AND APPLICATION - PART 1 - WELDING HANDBOOK, 9TH EDITION, VOLUME 4 - CHAPTER 10: UNDERWATER WELDING AND CUTTING
MIL-B-12745 Revision A:1973 BRIDGE ERECTION SET, FIXED BRIDGE, BASIC SET, FOR BRIDGES, STEEL, RAILWAY
API RP 1177 : 2017 RECOMMENDED PRACTICE FOR STEEL PIPELINE CONSTRUCTION QUALITY MANAGEMENT SYSTEMS
API 5C6 : 2006 : R2012 PIPE WITH WELDED CONNECTORS
API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
MIL C 14522 : D COMPONENTS, PREFABRICATED STRONG ROOM, PORTABLE: FOR SMALL ARMS AND EQUIPMENT
MIL-M-29460 Base Document:1990 MODULE, WATER PUMP (SIXCON)
API 6DR : 2012 RECOMMENDED PRACTICE FOR THE REPAIR AND REMANFACTURE OF PIPELINE VALVES
NFPA 54 : 2018 NATIONAL FUEL GAS CODE
MSS SP 119 : 2010 FACTORY-MADE WROUGHT BELLED END PIPE FITTINGS FOR SOCKET-WELDING
API 610 : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
API 575 : 2014 INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS
AWWA C302 : 2016 REINFORCED CONCRETE PRESSURE PIPE, NONCYLINDER TYPE
AWWA C230 : 2016 STAINLESS-STEEL FULL-ENCIRCLEMENT REPAIR AND SERVICE CONNECTION CLAMPS FOR 2-IN. THROUGH 12-IN. (50-MM THROUGH 300-MM) PIPE
EN ISO 21049:2004 Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004)
MIL-PRF-53090 Revision B:2016 BLADE, MINE CLEARING
API 8A : 1997 SPECIFICATION FOR DRILLING AND PRODUCTION HOISTING EQUIPMENT
API 934-A : 2008 MATERIALS AND FABRICATION OF 2 [1/4]CR-1MO, 2 [1/4]CR-1MO-[1/4]V, 3CR-1MO, AND 3CR-1MO-[1/4]V STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-TEMPERATURE, HIGH-PRESSURE HYDROGEN SERVICE
ENA TS 66-3 : ISSUE 1 1989 CARBON STEEL CASTINGS FOR STEAM TURBINES
MIL-T-52332 Revision B:1991 TOOL, HORIZONTAL CONNECTING, ERECTION EQUIPMENT FOR BRIDGE, FLOATING, PNEUMATIC FLOAT CLASS 60
ASME AG 1 : 2012 CODE ON NUCLEAR AIR AND GAS TREATMENT
DEFSTAN 02-706/2(2010) : 2010 WELDING & FABRICATION OF SHIP STRUCTURE FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS
EN ISO 13628-6:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006)
API RP 2201 : 2003 SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES
EN ISO 14310:2008 Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2008)
MSS SP 117 : 2011 BELLOWS SEALS FOR GLOBE AND GATE VALVES
MIL H 53076 : 1987 HEMTT TANKER AVIATION REFUELING SYSTEM (HTARS)
API 19G1 CHINESE : 2010 SIDE-POCKET MANDRELS
API 934-E : 2018 RECOMMENDED PRACTICE FOR MATERIALS AND FABRICATION OF 1[1/4]CR-[1/2]MO STEEL PRESSURE VESSELS FOR SERVICE ABOVE 825 DEGREES F (440 DEGREES C)
API 611 : 2008 : R2014 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 7NRV CHINESE : 2006 SPECIFICATION FOR DRILL STRING NON-RETURN VALVES
API 19G1 : 2010 SIDE-POCKET MANDRELS
MIL-B-52734 Revision C:1991 BRIDGE FLOATING RIBBON INTERIOR BAY AND RAMP BAY
ANS 40.35 : 1991 VOLUME REDUCTION OF LOW-LEVEL RADIOACTIVE WASTE OR MIXED WASTE
API 945:2003 AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS
API 618 : 2007 : R2016 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
MIL-P-52284 Revision C:1992 POST, HANDRAIL, FOOTBRIDGE
MIL-A-43657 Base Document:1969 ABSORBER, VAPOR, SYNTHETIC SOLVENT DRY CLEANING UNITS
MIL-S-12511 Revision G:1983 SPRAYER, INSECTICIDE, FRAME MOUNTED, GASOLINE ENGINE DRIVEN, MIST AND SOLID STREAM, 180 GPH
API TR 17TR8 : 2018 HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
MSS SP 105 : 2016 INSTRUMENT VALVES FOR CODE APPLICATIONS
MIL-L-52733 Revision A:1986 LABORATORY, AIRMOBILE, AVIATION FUEL
F-T-2907 Revision A:2006 TANKS, POTABLE HOT WATER STORAGE
API 16R:1997 SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS
MIL-C-52788 Revision B:1992 CONTAINER, REFRIGERATED: 8 FEET X 8 FEET X 20 FEET, INSULATED
EN ISO 17078-4:2010 Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010)
ASME PTB 2 : 2009 GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY
API 7K : 2015+ERR 2:2016 DRILLING AND WELL SERVICING EQUIPMENT
API 2CCU : 2017 OFFSHORE CARGO CARRYING UNITS
ENA TS 66-1 : ISSUE 2 1989 0.5 CHROMIUM, MOLYBDENUM, VANADIUM STEEL CASTINGS FOR STEAM TURBINES
ENA TS 66-2 : ISSUE 1 1989 2.25 CHROMIUM, MOLYBDENUM, STEEL CASTINGS FOR STEAM TURBINES
EN 13942:2009 Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified)
PIP VECV1001 : 2017 DESIGN CRITERIA AND PURCHASING REQUIREMENTS FOR VESSELS ASME CODE SECTION 8, DIVISIONS 1 AND 2
API 653 CHINESE : 2014 TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION
API 14L : 2007 : R2012 SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES
API 7NRV : 2006 : R2012 SPECIFICATION FOR DRILL STRING NON-RETURN VALVES
API TR 1PER15K-1 : 2013 PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT
API 14L CHINESE : 2007 SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES
API 17P : 2013 DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS
EN ISO 15136-2:2006 Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006)
EEMUA 211 : 2016 GUIDANCE ON THE SPECIFICATION OF PRESSURE VESSELS
API 5ST:2010 SPECIFICATION FOR COILED TUBING
API 14A : 2015 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
API 5ST : 2010 : R2015 SPECIFICATION FOR COILED TUBING
EN ISO 17945:2015 Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015)
API 19G2 : 2010 FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS
API SPEC 17K : 2017 SPECIFICATION FOR BONDED FLEXIBLE PIPE
API 7K : 2015 DRILLING AND WELL SERVICING EQUIPMENT
AWWA C563 : 2014 FABRICATED COMPOSITE SLIDE GATES
API 653 : 2014 TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION
API RP 2200 : 2015 REPAIRING HAZARDOUS LIQUID PIPELINES
API 570 CHINESE : 2009 PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS
MIL-T-52735 Revision B:1991 TRANSPORTER M812 CHASSIS, FOR RIBBON FLOATING BRIDGE
NFPA 99 : 2018 HEALTH CARE FACILITIES CODE
API 510 CHINESE : 2014 PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION
API 5LD CHINESE : 2009 SPECIFICATION FOR CRA CLAD OR LINED STEEL PIPE
NORSOK M 630 : REV 6 MATERIAL DATA SHEETS AND ELEMENT DATA SHEETS FOR PIPING
API 11D1 CHINESE : 2009 PACKERS AND BRIDGE PLUGS
API 5L CHINESE : 2012 SPECIFICATION FOR LINE PIPE
AWS D10.7M/D10.7 : 2008 GUIDE FOR THE GAS SHIELDED ARC WELDING OF ALUMINUM AND ALUMINUM ALLOY PIPE
API 676 CHINESE : 2009 POSITIVE DISPLACEMENT PUMPS - ROTARY
API STD 612:2020 Petroleum, Petrochemical, and Natural Gas Industries - Steam Turbines - Special-purpose Applications
MIL-P-53123 Base Document:1992 POWER UNITS/POWER PLANTS, ELECTRIC, DIESEL ENGINE, TRAILER MOUNTED, GENERAL SPECIFICATION FOR
MIL-C-0052980 Revision C:1994 COMPRESSORS, RECIPROCATING AND ROTARY, AIR DIESEL-ENGINE-DRIVEN, OR GASOLINE-ENGINE-DRIVEN
EN ISO 28781:2010 Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010)
API 620 : 2013 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
MIL-B-17095 Revision H:1990 BOILERS, STEAM, WATERTUBE (BENT TUBE, MULTI-DRUM AND CROSS DRUM) PACKAGED TYPE (10,000,000 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
MIL-A-52318 Revision A:1971 ANCHOR ASSEMBLY, HAND WINCH: FOR MEDIUM CABLEWAY
API 673 : 2014 CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 932B : 2012 DESIGN, MATERIALS, FABRICATION, OPERATION, AND INSPECTION GUIDELINES FOR CORROSION CONTROL IN HYDROPROCESSING REACTOR EFFLUENT AIR COOLER (REAC) SYSTEMS
API RP 14E : 1991 RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS
API STD 676 : 2009 POSITIVE DISPLACEMENT PUMPS - ROTARY
EN ISO 13628-5:2009 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals (ISO 13628-5:2009)
EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004)
NACE 8X194 : 2006 MATERIALS AND FABRICATION PRACTICES FOR NEW PRESSURE VESSELS USED IN WET H[2]S REFINERY SERVICE
NACE SP 01 99 : 2009 INSTALLATION OF STAINLESS CHROMIUM-NICKEL STEEL AND NICKEL-ALLOY ROLL-BONDED AND EXPLOSION-BONDED CLAD PLATE IN AIR POLLUTION CONTROL EQUIPMENT
NFPA 15 : 2017 WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION
CSA B625 : 2013 PORTABLE TANKS FOR THE TRANSPORT OF DANGEROUS GOODS
API RP 74 : 2001 RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION
API 6DSS CHINESE : 2009 SPECIFICATION FOR SUBSEA PIPELINE VALVES
EN ISO 3183:2012/A1:2018 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012)
API 2201 : 2003 : R2010 SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES
EN ISO 13628-2:2006/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
DEFSTAN 02-772/1(2007) : 2007 WELDING AND FABRICATION OF PIPEWORK, MACHINERY AND ENGINEERING COMPONENTS FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS
API 12F : 2008 SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS
EEMUA 234 : 2016 90/10 COPPER NICKEL ALLOY PIPING FOR OFFSHORE APPLICATIONS (SPECIFICATION)
API 546 : 2008 BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
API 16A : 2017 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
API 5L RUSSIAN : 2012 SPECIFICATION FOR LINE PIPE
MIL-B-14036 Revision E:1992 BRACKET, OUTBOARD MOTOR: BOW ATTACHMENT; 12-TON PNEUMATIC HALF FLOAT
API 618 : 2007 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 603 : 2013 CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS
API SPEC 14L : 2007 SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES
NACE MR 01 75 : 2003 METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS
API 5DP : 2010(R2015) SPECIFICATION FOR DRILL PIPE
API 614 : 2008 LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
API 577 CHINESE : 2013 WELDING PROCESSES, INSPECTION AND METALLURGY
API 5ST CHINESE : 2010 SPECIFICATION FOR COILED TUBING
API 12F CHINESE : 2008 SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS
API 12D CHINESE : 2008 SPECIFICATION FOR FIELD WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS
API 675 : 2012 POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
AWS D14.1/D14.1M:2005 SPECIFICATION FOR WELDING OF INDUSTRIAL AND MILL CRANES AND OTHER MATERIAL HANDLING EQUIPMENT
API 5C8 : 2017 CARE, MAINTENANCE, AND INSPECTION OF COILED TUBING
API 17G:2006 RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS
API 575 CHINESE : 2014 INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS
API 621 RUSSIAN : 2010 PIPELINE VALVES - RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES
API 5C6 CHINESE : 2006 WELDING CONNECTIONS TO PIPE
EN ISO 17078-3:2009 Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009)
API 6AR : 1994 RECOMMENDED PRACTICE FOR REPAIR AND REMANUFACTURE OF WELLHEAD AND CHRISTMAS TREE EQUIPMENT
MIL-T-10086 Revision H:1980 TANK, LIQUID STORAGE, METAL, VERTICAL, BOLTED
API 14E : 1991 : R2013 RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS
API 620 CHINESE : 2013 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
API STD 20M : 2017 QUALIFICATION OF SUPPLIERS OF MACHINING SERVICES FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRIES
MIL-PRF-32335 Base Document:2010 TRICON REFRIGERATED CONTAINER SYSTEM (TRCS)
MIL-S-52300 Revision D:1991 SHOE ASSEMBLY, TRESTLE
BS EN 14870-2:2004 Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Fittings
MIL-A-52940 Revision C:1987 AEROSOL GENERATOR, NON-THERMAL, INSECTICIDE, ULTRA LOW VOLUME
KKK-S-2851 Base Document:1994 SEMITRAILERS, REFUSE COLLECTION, COMPACTION TYPE: COMMERCIAL
EN ISO 13691:2002 Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001)
EN ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007)
API 74 : 2001 : R2013 RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION
MIL-C-11085 Revision D:1986 CONVEYOR, BELT; (FLAT, SKID-MOUNTED, ELECTRIC-MOTOR-DRIVEN, 24-INCH-WIDE BELT, 50-FOOT-LONG FRAME; CAPACITY, 25 POUNDS PER FOOT, 75 TONS PER HOUR)
API 6DX : 2012 ACTUATOR SIZING AND MOUNTING KITS FOR PIPELINE VALVES
UNI EN 13942 : 2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
ASME BPE : 2016 BIOPROCESSING EQUIPMENT
MIL-T-52369 Revision B:1991 TOWER ASSEMBLY, CABLEWAY, MEDIUM
API SPEC 11D1 : 2015 PACKERS AND BRIDGE PLUGS
MSS SP 141 : 2012 MULTI-TURN AND CHECK VALVE MODIFICATIONS
AWS B2.1/B2.1M : 2014 SPECIFICATION FOR WELDING PROCEDURE AND PERFORMANCE QUALIFICATION
AWS GWF : 1998 GUIDE FOR SETTING UP A WELDER TRAINING FACILITY
API SPEC 16C : 2015 CHOKE AND KILL EQUIPMENT
MIL-B-17228 Revision F:1990 BOILERS, STEAM AND HOT WATER, WATERTUBE (COIL AND SERPENTINE), PACKAGED TYPE (40,000 TO 10,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
API 8C : 2012 DRILLING AND PRODUCTION HOISTING EQUIPMENT (PSL 1 AND PSL 2)
API 64 : 2017-08 DIVERTER EQUIPMENT SYSTEMS
MIL-B-11844 Revision D:1976 BRIDGE, FIXED: STEEL, PORTABLE PANEL, BAILEY TYPE M2 (WIDENED ROADWAY)
MIL-B-3753 Revision E:1986 BUCKETS, CONCRETE, HAND-OPERATED, 3/4- TO 2- CUBIC YARD CAPACITY
MIL-C-11071 Revision D:1983 CLEANING MACHINE, FUEL CAN, DRUM
BS EN ISO 13691:2002 Petroleum and natural gas industries. High-speed special-purpose gear units
BS ISO 12490:2011 Petroleum and natural gas industries. Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
DIN EN ISO 17292:2016-05 METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015)
ASTM B 705 : 2017 : REDLINE Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
ASTM A 859/A859M : 2004 : R2019 : EDT 1 Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
ASTM F 1567 : 1994 : R2013 Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
CSA/ANSI NGV4.8 : 2012 : R2016 STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES
ISO 6947:2011 Welding and allied processes Welding positions
ISO 3977-3:2004 Gas turbines — Procurement — Part 3: Design requirements
CSA B51 : 2014 BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE
ASTM F 1271 : 1990 : R2001 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
ISO 13628-7:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems
B620-14 (R2019) Highway tanks and TC portable tanks for the transportation of dangerous goods
ASTM A 262 : 2015 : REDLINE Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A 691 : 1998 Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
MSS SP 81 : 2017 STAINLESS-STEEL OR STAINLESS-STEEL-LINED, BONNETLESS, KNIFE GATE VALVES WITH FLANGED ENDS
ASTM A 1006/A1006M : 2000 Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded
ASTM F 1271 : 1990 : R2018 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
ASTM F 1122 : 2004 : R2010 Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)
ASTM F 1122 : 2004 : R2015 : EDT 1 Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)
EN ISO 15156-2:2015 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015)
ASTM F 682 : 1982 : REV A : R2004 Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
EN ISO 11961:2008/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
ASTM A 1006/A1006M : 2000 : R2004 Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded
ISO 14693:2003 Petroleum and natural gas industries — Drilling and well-servicing equipment
ASTM F 1201 : 1988 : R2010 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0&#176F
ASTM F 1201 : 1988 : R2004 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0&#176F
ASTM A 965/A965M : 2014-05 SPECIFICATION FOR STEEL FORGINGS, AUSTENITIC, FOR PRESSURE AND HIGH TEMPERATURE PARTS
ASTM F 1271 : 1990 : R2012 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
ASTM B 804 : 2002 : R2013 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
ASTM F 1567 : 1994 : R2001 Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
ASTM F 1567 : 1994 Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
ISO 28781:2010 Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment
ASTM F 1200 : 1988 : R2004 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150&#176F)
ASTM F 1120 : 1987 : R2010 Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
ASTM F 1020 : 1986 : R2018 Standard Specification for Line-Blind Valves for Marine Applications
ASTM F 1120 : 1987 : R2004 Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
ASTM F 1139 : 1988 : R2015 Standard Specification for Steam Traps and Drains
BS EN ISO 16904:2016 Petroleum and natural gas industries. Design and testing of LNG marine transfer arms for conventional onshore terminals
CSA N285.7 : 2015 Periodic inspection of CANDU nuclear power plant balance of plant systems and components<br>
ASTM B 906 : 2002 : R2012 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
ASTM F 1298 : 1990 : R2012 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
BS EN ISO 13628-2:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications
PD 8010-2:2004 Code of practice for pipelines Subsea pipelines
ASTM A 859/A859M : 2004 Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
ISO 12490:2011 Petroleum and natural gas industries — Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
BS EN ISO 13628-7:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Completion/workover riser systems
ISO 18139:2017 Ships and marine technology — Globe valves for use in low temperature applications — Design and testing requirements
BS EN ISO 15156-2:2015 Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant carbon and low alloy steels, and the use of cast irons
ASTM A 381 : 1996 : R2001 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
BS EN ISO 11961:2008 Petroleum and natural gas industries. Steel drill pipe
ASTM A 691 : 1998 : R2002 Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
ASTM F 1298 : 1990 : R2018 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
BS EN ISO 28781:2010 Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment
BS EN ISO 6947:2011 Welding and allied processes. Welding positions
ASTM F 1007 : 1986 : R1996 : EDT 1 Standard Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application
API 621 : 2010 RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES
IEEE 628-2011 IEEE Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations
BS EN ISO 15136-2:2006 Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems
ASTM A 1005/A1005M : 2000 : EDT 1 Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded
ASTM F 1311 : 1990 : R2018 Standard Specification for Large–Diameter Fabricated Carbon Steel Flanges
ASTM A 1005/A1005M : 2000 : R2004 Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded
ISO 14310:2008 Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs
ASTM F 1298 : 1990 : R2006 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
ASTM A 774/A774M : 2014 : REDLINE Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
API 12GDU : 1990 SPECIFICATION FOR GLYCOL-TYPE GAS DEHYDRATION UNITS
ASTM B 804 : 2002 : R2007 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
ASTM A 672/A672M : 2014 : REDLINE Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
ASTM B 546 : 2004 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
API SPEC 19AC : 2016 SPECIFICATION FOR COMPLETION ACCESSORIES
DIN EN ISO 17945:2015-08 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015)
DIN EN ISO 15156-2:2015-12 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015)
BS EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
ASTM F 1298 : 1990 : R2001 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
BS EN ISO 17078-3:2009 Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels
BS EN ISO 13709:2003 Centrifugal pumps for petroleum, petrochemical and natural gas industries
ASTM A 859/A859M : 2004 : R2009 Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
N285.0-17/N285.6 SERIES-17 General requirements for pressure-retaining systems and components in CANDU nuclear power plants / Material Standards for reactor components for CANDU nuclear power plants
ISO 15136-2:2006 Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems
ISO 10855-1:2018 Offshore containers and associated lifting sets Part 1: Design, manufacture and marking of offshore containers
PD CEN/TR 14633:2003 Welding. Working positions. Comparison of current international, European and US designations
ISO 13628-5:2009 Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals
ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors
UNE-EN ISO 6947:2011 Welding and allied processes - Welding positions (ISO 6947:2011)
BS EN ISO 10440-1:2001 Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free)
ASTM A 1091/A1091M : 2016 Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service
ASTM F 1298 : 1990 : R1995 : EDT 1 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
ISO 14313:2007 Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves
ASTM A 1091/A1091M : 2016 : EDT 1 Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service
ASTM F 1020 : 1986 : R2006 Standard Specification for Line-Blind Valves for Marine Applications
ISO 16070:2005 Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples
ASTM F 1201 : 1988 : R2016 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F
ISO 21049:2004 Pumps Shaft sealing systems for centrifugal and rotary pumps
ASTM F 1387 : 1999 : R2012 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
DIN EN ISO 10434:2005-01 BOLTED BONNET STEEL GATE VALVES FOR THE PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES
ASTM A 134 : 1996 : R2012 Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
ASTM A 358/A358M : 2015 : REDLINE Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
ASTM A 989/A989M : 2018 : REDLINE Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A 1005/A1005M : 2000 : R2010 Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded (Withdrawn 2014)
ASTM F 1139 : 1988 : R2004 Standard Specification for Steam Traps and Drains
ASTM F 682 : 1982 : REV A : R2014 Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
ISO 3183:2012 Petroleum and natural gas industries Steel pipe for pipeline transportation systems
ISO 16904:2016 Petroleum and natural gas industries Design and testing of LNG marine transfer arms for conventional onshore terminals
API RP 17R : 2015 RECOMMENDED PRACTICE FOR FLOWLINE CONNECTORS AND JUMPERS
BS EN ISO 10423:2009 Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM
NEMA XR 14-1990 (R1995, R2000) RECOMMENDED PRACTICES FOR LOAD-BEARING MECHANICAL ASSEMBLIES USED IN DIAGNOSTIC IMAGING
ASTM F 1311 : 1990 : R1995 : EDT 1 Standard Specification for Large-Diameter Fabricated Carbon Steel Flanges
ASTM F 1200 : 1988 : R1998 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150&#176F)
API 14E CHINESE : 2007 RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS
ISO 13533:2001 Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment
ASTM A 1053/A1053M : 2012 : R2017 Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
BS EN ISO 14723:2009 Petroleum and natural gas industries. Pipeline transportation systems. Subsea pipeline valves
ISO 17824:2009 Petroleum and natural gas industries Downhole equipment Sand screens
ASTM F 1387 : 1999 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
ASTM E 2956 : 2014 Standard Guide for Monitoring the Neutron Exposure of LWR Reactor Pressure Vessels
N285.4-14 Periodic inspection of CANDU nuclear power plant components
ASTM B 546 : 2004 : R2014 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
ASTM B 658/B658M : 2011 : R2016 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
DIN EN ISO 6947:2011-08 WELDING AND ALLIED PROCESSES - WELDING POSITIONS
ASTM B 653/B653M : 2011 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
ASTM C 1062 : 2000 : R2014 Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities
EN ISO 6947:2011 Welding and allied processes - Welding positions (ISO 6947:2011)
ISO 17078-2:2007 Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels
B622-14 (R2019) Selection and use of highway tanks, TC portable tanks, and ton containers for the transportation of dangerous goods, Class 2
CAN/CSA-Z662-15 Oil and gas pipeline systems
ISO 13628-15:2011 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds
ASTM F 1273 : 1991 : R2013 Standard Specification for Tank Vent Flame Arresters
ASTM B 898 : 2011 Standard Specification for Reactive and Refractory Metal Clad Plate
ASTM B 804 : 2002 : R2018 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
ASTM F 1311 : 1990 : R2012 Standard Specification for Large–Diameter Fabricated Carbon Steel Flanges
API 19G3 : 2011 RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS
ISO 14998:2013 Petroleum and natural gas industries — Downhole equipment — Completion accessories
ASTM B 658/B658M : 2011 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
ASTM A 381 : 1996 : R2005 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
ASTM A 139 : 2000 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
ASTM B 906 :2002 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
BS ISO 18139:2017 Ships and marine technology. Globe valves for use in low temperature applications. Design and testing requirements
ASTM A 928/A928M : 2014 : REDLINE Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
ASTM F 1311 : 1990 : R2006 Standard Specification for Large-Diameter Fabricated Carbon Steel Flanges
ASTM F 1007 : 1986 : R2002 Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
BS EN ISO 17824:2014 Petroleum and natural gas industries. Downhole equipment. Sand screens
ASTM B 546 : 2004 : R2009 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
ASTM B 804 : 2002 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
ASTM B 653/B653M : 2011 : R2016 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
BS EN ISO 17078-1 : 2004 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
ASTM B 658/B658M : 2011 : EDT 1 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
ASTM F 1120 : 1987 : R1998 Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
ASTM A 872/A872M : 2014 : REDLINE Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
ASTM F 1273 : 1991 : R2007 Standard Specification for Tank Vent Flame Arresters
BIS IS/ISO 3183 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
BS 8010-3:1993 Code of practice for pipelines Pipelines subsea: design, construction and installation
ASTM F 682 : 1982 : REV A : R2008 Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
ISO 15590-2:2003 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 2: Fittings
ISO 15136-1:2009 Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps
ASTM F 1200 : 1988 : R2010 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150&#176F)
BS EN ISO 13533:2002 Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment
BS EN ISO 14693:2003 Petroleum and natural gas industries. Drilling and well-servicing equipment
BS EN ISO 10438-2:2003 Petroleum and natural gas industries. Lubrication, shaft sealing and control oil systems and auxiliaries Special purpose oil systems
ASTM F 1139 : 1988 : R1998 Standard Specification for Steam Traps and Drains
ASTM F 1020 : 1986 : R2001 Standard Specification for Line-Blind Valves for Marine Applications
ASTM A 409/A409M : 2015 : REDLINE Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
BS EN ISO 14998:2013 Petroleum and natural gas industries. Downhole equipment. Completion accessories
ASTM F 1273 : 1991 : R2002 Standard Specification for Tank Vent Flame Arresters
BS EN ISO 13628-5:2009 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea umbilicals
BS EN ISO 3183 : 2012 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
BS EN ISO 14310:2008 Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs
ASTM A 134 : 1996 Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
ASTM A 1006/A1006M : 2000 : R2010 Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded (Withdrawn 2014)
ASTM A 758/A758M : 2014 : REDLINE Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
ASTM F 1200 : 1988 : R2016 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)
ASTM A 671 : 2009 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
ASTM F 1120 : 1987 : R2015 Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
ASTM A 1053/A1053M : 2012 : EDT 1 Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
ASTM B 363 : 2014 : REDLINE Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
ISO 13710:2004 Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps
ASTM F 1567 : 1994 : R2006 Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
ASTM F 1271 : 1990 : R1995 : EDT 1 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
ISO 14723:2009 Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves
ISO 17078-4:2010 Petroleum and natural gas industries — Drilling and production equipment — Part 4: Practices for side-pocket mandrels and related equipment
ASTM A 381 : 1996 : R2012 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
API 510 : 2014 PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION
ISO 13628-2:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications
ISO 3183-1:1996 Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A
ASTM A 858/A858M : 2014 : REDLINE Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
ASME PCC 2 : 2015 REPAIR OF PRESSURE EQUIPMENT AND PIPING
ASTM B 361 : 2016 : REDLINE Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
BS EN ISO 15136-1:2001 Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps
ASTM B 906 : 2002 : R2017 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
ISO 17945:2015 Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
BS EN ISO 13628-10:2006 Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe
ANSI/CSA HGV 4.8-2012 (R2018) Hydrogen gas vehicle fueling station compressor guidelines
DIN EN ISO 3183:2013-03 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012)
ASTM F 1122 : 2004 Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)
ASTM A 134 : 1996 : R2005 Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
ISO 13628-10:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe
ISO 13628-6:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems
CSA/ANSI NGV4.8 :2012 STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES
BS EN 13942:2009 Petroleum and natural gas industries. Pipeline transportation systems. Pipeline valves
ISO 10423:2009 Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment
BS EN ISO 17945:2015 Petroleum, petrochemical and natural gas industries. Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
API 650 : 2013+ADD 3 : 2018 WELDED TANKS FOR OIL STORAGE
API SPEC 16F : 2017 SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT
I.S. EN ISO 11961:2008 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
ISO 10432:2004 Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment
ASTM A 381 : 1996 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
ASME B31.8 : 2016 Gas Transmission and Distribution Piping Systems
ISO 10433:1994 Petroleum and natural gas industries — Drilling and production equipment — Specification for wellhead surface safety valves and underwater safety valves for offshore service
BS EN ISO 13628-6:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea production control systems
BS EN ISO 21049:2004 Pumps. Shaft sealing systems for centrifugal and rotary pumps
BS EN ISO 13628-15:2011 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea structures and manifolds
BS EN ISO 16070:2005 Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples
ISO 13628-3:2000 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 3: Through flowline (TFL) systems
ASTM A 859/A859M : 2004 : R2014 Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
ASTM B 906 : 2002 : R2006 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
ISO 17078-3:2009 Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels
ASTM F 1387 : 1999 : R2005 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
ASTM F 1020 : 1986 : R1996 : EDT 1 Standard Specification for Line-Blind Valves for Marine Applications
ASTM A 488/A488M : 2017-05 PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL
Z276-18 Liquefied natural gas (LNG) - Production, storage, and handling
ASTM F 682 : 1982 : REV A : R1998 Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
ASTM A 105/A105M : 2014-11 SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS
NACE RP 04 72 : 2005 METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS
CSA Z245.1 : 2014 STEEL PIPE
CSA/ANSI NGV4.8 : 2012 : R2013 STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES
CSA Z245-12 : 2017 STEEL FLANGES
ASTM F 2934 : 2012 Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications
ASTM A 1053/A1053M : 2012 Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
BS EN ISO 17078-2:2007 Petroleum and natural gas industries. Drilling and production equipment Flow-control devices for side-pocket mandrels
ASTM F 1007 : 1986 : R2014 Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
ASTM F 1323 : 2014 : REDLINE Standard Specification for Shipboard Incinerators
ASTM A 134 : 1996 : R2001 Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
BS EN ISO 13628-3:2001 Petroleum and natural gas industries. Design and operation of subsea production systems Through flowline (TFL) systems
BS EN ISO 10432:2004 Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment
ASTM A 691 : 1998 : R2007 Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
ASTM A 139/A139M : 2016 : REDLINE Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
MSS SP 135 : 2016 HIGH PRESSURE KNIFE GATE VALVES
ISO 10438-2:2007 Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 2: Special-purpose oil systems
ASTM F 1139 : 1988 : R2010 Standard Specification for Steam Traps and Drains
ASTM F 2934 : 2012 : R2018 Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications
API SPEC 12K : 2008 SPECIFICATION FOR INDIRECT TYPE OILFIELD HEATERS
ASTM A 266/A266M : 2018 : REDLINE Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
ASTM B 898 : 2011 : R2016 Standard Specification for Reactive and Refractory Metal Clad Plate
ISO 15156-2:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
BS PD8010-2(2015) : 2015 PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE
BS EN ISO 13628-4:1999 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea wellhead and tree equipment
ASTM F 1201 : 1988 : R1998 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0&#176F
PD 8010-2:2015+A1:2016 Pipeline systems Subsea pipelines. Code of practice
API 650 : 2013 WELDED TANKS FOR OIL STORAGE
ASTM A 707/A707M : 2014 : REDLINE Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
ASTM F 1273 : 1991 : R1996 : EDT 1 Standard Specification for Tank Vent Flame Arresters
ASTM A 420/A420M : 2016 : REDLINE Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
Z245.15-17 Steel valves
ASTM F 1007 : 1986 : R2007 Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
ISO 17078-1:2004 Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels
ASTM C 1062 : 2000 : R2008 Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities
ISO 13691:2001 Petroleum and natural gas industries — High-speed special-purpose gear units
BS ISO 3977-3:2004 Gas turbines. Procurement Design requirements
BS ISO 13628-5:2002 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea umbilicals
ASTM C 1062 : 2000 Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities
ASTM F 1020 : 1986 : R2011 Standard Specification for Line-Blind Valves for Marine Applications
ASTM F 1271 : 1990 : R2006 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
ASTM F 1311 : 1990 : R2001 Standard Specification for Large-Diameter Fabricated Carbon Steel Flanges
PIP VESV1002 : 2012 DESIGN AND FABRICATION SPECIFICATION FOR VESSELS ASME CODE SECTION 8, DIVISIONS 1 AND 2
API SPEC 12L : 2008 SPECIFICATION FOR VERTICAL AND HORIZONTAL EMULSION TREATERS
ISO 13628-4:2010 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment
UNE-EN ISO 17292:2016 Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015)
BS EN ISO 17078-4:2010 Petroleum and natural gas industries. Drilling and production equipment Practices for side-pocket mandrels and related equipment CD-ROM
API 610 REDLINE : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
API 17F REDLINE : 2006 SPECIFICATION FOR SUBSEA PRODUCTION CONTROL SYSTEMS
API 6A CHINESE : 2011 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
API 653 REDLINE : 2009 TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION
API 621 REDLINE : 2010 RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES
API 620 REDLINE : 2008 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
API 619 REDLINE : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
API 14D : 1994 SPECIFICATION FOR WELLHEAD SURFACE SAFETY VALVES AND UNDERWATER SAFETY VALVES FOR OFFSHORE SERVICE
API 5LD REDLINE : 2009 SPECIFICATION FOR CRA CLAD OR LINED STEEL PIPE
API 6DSS REDLINE : 2009 SPECIFICATION FOR SUBSEA PIPELINE VALVES
ASME STP-NU-078 : 2016 COMPARISON REPORT ON WELDING QUALIFICATION AND WELDING QUALITY ASSURANCE
API 674 REDLINE : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 7K REDLINE : 2010 DRILLING AND WELL SERVICING EQUIPMENT
API 616 REDLINE : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API TR 938-C REDLINE : 2011 USE OF DUPLEX STAINLESS STEELS IN THE OIL REFINING INDUSTRY
ANSI N14.19 : 1986 ANCILLARY FEATURES OF IRRADIATED FUEL SHIPPING CASKS,
API 685 REDLINE : 2011 SEALLESS CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL, AND GAS INDUSTRY PROCESS SERVICE
API 602 REDLINE : 2009 STEEL GATE, GLOBE, AND CHECK VALVES FOR SIZES NPS 4 (DN 100) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
API 5L REDLINE : 2007 SPECIFICATION FOR LINE PIPE
API 11D1 REDLINE : 2009 PACKERS AND BRIDGE PLUGS
PIP RESE001 : 2017 GENERAL PURPOSE SKID-MOUNTED PACKAGED EQUIPMENT SPECIFICATION
API 11D3 : 2008 : R2015 PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS
API 1111 REDLINE : 2009 DESIGN, CONSTRUCTION, OPERATION, AND MAINTENANCE OF OFFSHORE HYDROCARBON PIPELINES (LIMIT STATE DESIGN)
API 600 REDLINE : 2009 STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS
API 2200 REDLINE : 2010 REPAIRING CRUDE OIL, LIQUEFIED PETROLEUM GAS, AND PRODUCT PIPELINES
API 570 REDLINE : 2009 PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS
ASME PV CODE 3 NH DIV 1 : 2015 BOILER AND PRESSURE VESSEL CODE - RULES FOR THE CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - CLASS 1 COMPONENTS IN ELEVATED TEMPERATURE SERVICE
API 6H : 1998 : R2011 SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS
API 8A CHINESE : 1997 SPECIFICATION FOR DRILLING AND PRODUCTION HOISTING EQUIPMENT
API 614 REDLINE : 2008 LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
API 11D3 :2008 PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS
API 17C : 2002 : R2010 RECOMMENDED PRACTICE ON TFL (THROUGH FLOWLINE) SYSTEMS
PIP PNSM0110 : 2017 PURCHASING REQUIREMENTS FOR VALVES
12/30262118 DC BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
API 676 REDLINE : 2009 POSITIVE DISPLACEMENT PUMPS - ROTARY
API 17D REDLINE : 2011 DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT
NBR 15209 : 2005 CARGO TANK TRAILER FOR THE HYDROFLUORIC ACID TRANSPORTATION ANHYDROUS (100%) BULK LIQUID
API 582 REDLINE : 2009 WELDING GUIDELINES FOR THE CHEMICAL, OIL, AND GAS INDUSTRIES
PIP PNE00004 : 2016 STEAM TRAP GUIDELINES
API 5C6 RUSSIAN : 2012 WELDING CONNECTIONS TO PIPE
ANSI N14.6 : 1993 RADIOACTIVE MATERIALS - SPECIAL LIFTING DEVICES FOR SHIPPING CONTAINERS WEIGHING 10 000 POUNDS (4500 KG) OR MORE
API 6H CHINESE : 1998 SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS
12/30250727 DC BS EN ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS
PIP VESIN001 : 2018 DESIGN AND FABRICATION SPECIFICATION FOR PRESSURE VESSEL INTERNALS
ASME B31.12 : 2014 HYDROGEN PIPING AND PIPELINES
API 6H : 1998 SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS
ASME B31.3 SPANISH : 2010 PROCESS PIPING
API 600 RUSSIAN : 2009 STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS
API 17J REDLINE : 2008 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
API 611 REDLINE : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 17E REDLINE : 2010 SPECIFICATION FOR SUBSEA UMBILICALS
API 16C RUSSIAN : 1993 SPECIFICATION FOR CHOKE AND KILL SYSTEMS
API 7 : 2001 SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
API 14A RUSSIAN : 2001 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
API 8A RUSSIAN : 1997 SPECIFICATION FOR DRILLING AND PRODUCTION HOISTING EQUIPMENT
API 17 C : 2002 RECOMMENDED PRACTICE ON TFL (THROUGH FLOWLINE) SYSTEMS

View more information
€504.16
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.