![header thumbnail](/images/img-default-logo.png)
EN 15085-1:2007+A1:2013
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
![header thumbnail](/images/img-default-logo.png)
Railway applications - Welding of railway vehicles and components - Part 1: General
30-11-2013
22-05-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
Bibliography
This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts.With respect to the railway environment, this series of standards defines the certification and quality requirements for the welding manufacturer to undertake new building and repair work. It then provides an essential link between performance requirements defined during design, and achieves appropriate quality welds during production and the demonstration of the required quality by inspection.This link is achieved by defining a weld performance class during design, which is based on safety and stress factors relevant to railway operation. Quality levels of imperfections are assigned to weld performance classes to ensure a certain level of performance intended during design. Based on these weld performance classes, certification levels for production as well as inspection and testing and qualifications for welding personnel of the manufacturer are specified.This standard deals with welding steel and aluminium alloys including castings.NOTEThe principle of this standard may also be applied for welding of other parent materials (e.g. Cu, Mg).This part of the series provides general recommendations and definitions for welding railway vehicles and associated components. Except for specific provisions which are laid down contractually, this standard applies to all assemblies, sub-assemblies or parts welded by any welding process, either manual, partly mechanized, fully mechanized or automatic welding as defined in EN ISO 4063.This series of standards does not deal with product qualification.Items of equipment subject to specific regulations are not relevant to the scope of this series of standards, e.g. air reservoirs according to EN 286-3 and EN 286-4.
Committee |
CEN/TC 256
|
DevelopmentNote |
2007 Edition Re-Issued in May 2013 & incorporates AMD 1 2013. (06/2013)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Withdrawn
|
Standards | Relationship |
ONORM EN 15085-1 : 2013 | Identical |
DS EN 15085-1 : 2007 + A1 2013 | Identical |
BS EN 15085-1 : 2007 | Identical |
SN EN 15085-1+A1:2013 | Identical |
NBN EN 15085-1 : 2008 + A1 2013 | Identical |
NEN EN 15085-1 : 2007 + A1 2013 | Identical |
NS EN 15085-1 : 2007 + A1 2013 | Identical |
NF EN 15085-1 : 2007 + A1 2013 | Identical |
DIN EN 15085-1:2013-11 | Identical |
PN EN 15085-1 : 2007 + A1 2013 | Identical |
UNE-EN 15085-1:2008 | Identical |
UNI EN 15085-1 : 2014 | Identical |
I.S. EN 15085-1:2007 | Identical |
UNE-EN 15085-1:2008+A1:2013 | Identical |
BS EN 15085-1:2007+A1:2013 | Identical |
UNI EN 13749 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - METHODS OF SPECIFYING THE STRUCTURAL REQUIREMENTS OF BOGIES FRAMES |
BS EN 15566:2016 | Railway applications. Railway rolling stock. Draw gear and screw coupling |
17/30244737 DC : 0 | BS EN 17149 - RAILWAY APPLICATIONS - FATIGUE STRENGTH ASSESSMENT OF RAILWAY VEHICLE STRUCTURES BASED ON CUMULATIVE DAMAGE |
NF EN 15827 : 2011 | RAILWAY APPLICATIONS - REQUIREMENTS FOR BOGIES AND RUNNING GEARS |
DIN EN 15085-2:2008-01 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 2: QUALITY REQUIREMENTS AND CERTIFICATION OF WELDING MANUFACTURER |
DIN EN 15085-5:2008-01 | Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation |
EN 15085-3:2007/AC:2009 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS |
I.S. EN 15085-5:2007 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 5: INSPECTION, TESTING AND DOCUMENTATION |
I.S. EN 15085-4:2007 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 4: PRODUCTION REQUIREMENTS |
I.S. EN 15085-3:2007 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS |
I.S. EN 15566:2016 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
BS EN 13749:2011 | Railway applications. Wheelsets and bogies. Method of specifying the structural requirements of bogie frames |
CEN Guide 14:2010 | Common policy guidance for addressing standardisation on qualification of professions and personnel |
DIN EN 15085-4:2008-01 | Railway applications - Welding of railway vehicles and components - Part 4: Production requirements |
UNI EN 15085-3 : 2008 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS |
BS EN 15827:2011 | Railway applications. Requirements for bogies and running gears |
08/30174483 DC : DRAFT JULY 2008 | BS EN 15827-2 - RAILWAY APPLICATIONS - BOGIES AND RUNNING GEAR - PART 2: STRUCTURAL REQUIREMENTS |
08/30180826 DC : DRAFT JULY 2008 | BS EN 13749 - RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - METHOD OF SPECIFYING THE STRUCTURAL REQUIREMENTS OF BOGIE FRAMES |
BS EN 15551:2017 | Railway applications. Railway rolling stock. Buffers |
I.S. EN 15551:2017 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
PREN 15566 : DRAFT 2013 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
DIN EN 15085-3:2010-01 | Railway applications - Welding of railway vehicles and components - Part 3: Design requirements |
BS EN 15085-2:2007 | Railway applications. Welding of railway vehicles and components Quality requirements and certification of welding manufacturer |
BS EN 15085-3:2007 | Railway applications. Welding of railway vehicles and components Design requirements |
UNE-EN 13749:2012 | Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames |
BS EN 15085-5:2007 | Railway applications. Welding of railway vehicles and components Inspection, testing and documentation |
I.S. EN 15085-2:2007 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 2: QUALITY REQUIREMENTS AND CERTIFICATION OF WELDING MANUFACTURER |
EN 15085-2:2007 | Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer |
EN 15085-4:2007 | Railway applications - Welding of railway vehicles and components - Part 4: Production requirements |
UNI EN 15827 : 2011 | RAILWAY APPLICATIONS - REQUIREMENTS FOR BOGIES AND RUNNING GEARS |
DIN EN 13749:2011-06 | Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames |
13/30279826 DC : 0 | BS EN 15551 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
13/30241415 DC : 0 | BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
I.S. EN 13749:2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - METHOD OF SPECIFYING THE STRUCTURAL REQUIREMENTS OF BOGIE FRAMES |
UNE-EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
BS EN 15085-4:2007 | Railway applications. Welding of railway vehicles and components Production requirements |
UNE-EN 15827:2011 | Railway applications - Requirements for bogies and running gears |
EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
EN 15827:2011 | Railway applications - Requirements for bogies and running gears |
EN 15085-5:2007 | Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation |
EN 15566:2016 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
DIN EN 15827:2011-06 | Railway applications - Requirements for bogies and running gears |
UNE-EN 15566:2017 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
S.R. CEN Guide 14:2010 | COMMON POLICY GUIDANCE FOR ADDRESSING STANDARDIZATION ON QUALIFICATION OF PROFESSIONS AND PERSONNEL |
NF EN 13749 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - METHOD OF SPECIFYING THE STRUCTURAL REQUIREMENTS OF BOGIE FRAMES |
I.S. EN 15827:2011 | RAILWAY APPLICATIONS - REQUIREMENTS FOR BOGIES AND RUNNING GEARS |
EN 13749:2011 | Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames |
ISO/IEC 17000:2004 | Conformity assessment Vocabulary and general principles |
ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
EN 286-3:1994 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
EN 15085-5:2007 | Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation |
EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
EN 286-4:1994 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
EN 45020:2006 | Standardization and related activities - General vocabulary (ISO/IEC Guide 2:2004) |
ISO/IEC Guide 2:2004 | Standardization and related activities — General vocabulary |
EN ISO/IEC 17000:2004 | Conformity assessment - Vocabulary and general principles (ISO/IEC 17000:2004) |
EN 15085-2:2007 | Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer |
CEN/TR 14599:2005 | Terms and definitions for welding purposes in relation with EN 1792 |
EN 45020 : 2006 | STANDARDIZATION AND RELATED ACTIVITIES - GENERAL VOCABULARY |
EN 1792:2003 | Welding - Multilingual list of terms for welding and related processes |
ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
EN ISO 17659:2004 | Welding - Multilingual terms for welded joints with illustrations (ISO 17659:2002) |
EN 15085-3:2007/AC:2009 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS |
ISO 17659:2002 | Welding — Multilingual terms for welded joints with illustrations |
EN 15085-4:2007 | Railway applications - Welding of railway vehicles and components - Part 4: Production requirements |
EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.