EN 15288-2:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Swimming pools - Part 2: Safety requirements for operation
12-03-2022
03-09-2008
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
4.1 Swimming pool Type 1
4.2 Swimming pool Type 2
4.3 Swimming pool Type 3
5 Organisational requirements
5.1 General operational procedure
5.2 Pool safety procedures/instructions
6 Operational requirements
6.1 Operational requirements for safe working practices for
a swimming pool and its equipment
6.2 Operational requirements for management of pool staff
6.3 Operational requirements for emergency procedures
7 Instruction to the users
7.1 General
7.2 Information to the users
Annex A (normative) - Dye test - Operational Instructions
Annex B (informative) - Samples of accident recording form
B.1 Sample of accident recording form from the Netherlands
B.2 Sample of accident report form from United Kingdom
Bibliography
This European Standard specifies safety requirements for operating of classified pools according to clause 4. It is intended for those concerned with the operation and management of classified swimming pools. It pro-vides guidance about the risks for staff and users associated with public swimming pools, by identifying the precautions needed to achieve safety.This European Standard has limited application to classified pools which consist of segregated areas of rivers, lakes or the sea. The requirements for safe working methods and supervision should be followed insofar as they are relevant.
Committee |
CEN/TC 136
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NS EN 15288-2 : 2018 | Identical |
UNE-EN 15288-2:2009 | Identical |
ONORM EN 15288-2 : 2009 | Identical |
PN EN 15288-2 : 2008 | Identical |
NEN EN 15288-2 : 2008 | Identical |
DIN EN 15288-2:2009-05 | Identical |
PN-EN 15288-2: 2019 | Identical |
NBN EN 15288-2 : 2008 | Identical |
NS EN 15288-2 : 1ED 2008 | Identical |
BS EN 15288-2:2008 | Identical |
UNI EN 15288-2:2019 | Identical |
I.S. EN 15288-2:2008 | Identical |
NEN-EN 15288-2:2018 en | Identical |
SN EN 15288-2 : 2008 | Identical |
I.S. EN 15288-2:2018 | Identical |
BS EN 15288-2:2018 | Identical |
NF EN 15288-2 : 2008 | Identical |
UNI EN 15288-2 : 2009 | Identical |
ÖNORM EN 15288-2: 2019 04 15 | Identical |
SN EN 15288-2:2019 | Identical |
12/30266561 DC : 0 | BS EN 13451-10 - SWIMMING POOL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT |
08/30181446 DC : DRAFT JULY 2008 | BS EN 1069-1 - WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
12/30266564 DC : 0 | BS EN 13451-11 - SWIMMING POOL EQUIPMENT - PART 11: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR MOVABLE POOL FLOORS AND MOVABLE BULKHEADS |
PREN 1069-2 : DRAFT 2015 | WATER SLIDES - PART 2: INSTRUCTIONS |
DIN EN 13451-11:2014-05 | Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads |
BS EN 13451-11:2014 | Swimming pool equipment Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads |
BS EN 13451-5:2014 | Swimming pool equipment Additional specific safety requirements and test methods for lane lines and dividing line |
UNE-EN 13451-11:2014 | Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads |
BS EN 13451-1 : 2011 | SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN 13451-5:2014 | SWIMMING POOL EQUIPMENT - PART 5: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LANE LINES AND DIVIDING LINE |
I.S. EN 1069-2:2017 | WATER SLIDES - PART 2: INSTRUCTIONS |
I.S. EN 13451-4:2014 | SWIMMING POOL EQUIPMENT - PART 4: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR STARTING PLATFORMS |
EN 1069-1:2017 | Water slides - Part 1: Safety requirements and test methods |
DIN EN 13451-10:2014-05 | SWIMMING POOL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT |
EN 1069-2:2017 | Water slides - Part 2: Instructions |
DIN EN 1069-1:2017-11 | WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
EN 13451-11:2014 | Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads |
PREN 13451-5 : DRAFT 2012 | SWIMMING POOL EQUIPMENT - PART 5: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LANE LINES AND DIVIDING LINE |
13/30287839 DC : 0 | BS EN 13451-2 - SWIMMING POOL EQUIPMENT - PART 2: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LADDERS, STEPLADDERS AND HANDLE BENDS |
I.S. EN 1069-1:2017 | WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 13451-2:2016-03 | SWIMMING POOL EQUIPMENT - PART 2: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LADDERS, STEPLADDERS AND HANDLE BENDS |
UNE-EN 13451-5:2015 | Swimming pool equipment - Part 5: Additional specific safety requirements and test methods for lane lines and dividing line |
UNE-EN 13451-2:2016 | Swimming pool equipment - Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends |
EN 13451-2:2015 | SWIMMING POOL EQUIPMENT - PART 2: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LADDERS, STEPLADDERS AND HANDLE BENDS |
I.S. EN 13451-11:2014 | SWIMMING POOL EQUIPMENT - PART 11: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR MOVEABLE POOL FLOORS AND MOVEABLE BULKHEADS |
I.S. EN 13451-1:2011 | SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 13451-11:2004-04 | SWIMMING POOL EQUIPMENT - PART 11: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR MOVEABLE POOL FLOORS AND MOVEABLE BULKHEADS |
I.S. EN 13451-3:2011 | SWIMMING POOL EQUIPMENT - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR INLETS AND OUTLETS AND WATER/AIR BASED WATER LEISURE FEATURES |
DIN EN 13451-5:2001-07 | SWIMMING POOL EQUIPMENT - PART 5: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LANE LINES AND DIVIDING LINE |
ISO 20380:2017 | Public swimming pools — Computer vision systems for the detection of drowning accidents in swimming pools — Safety requirements and test methods |
05/30135907 DC : 0 | EN 15288-1 - SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
I.S. EN ISO 20380:2017 | PUBLIC SWIMMING POOLS - COMPUTER VISION SYSTEMS FOR THE DETECTION OF DROWNING ACCIDENTS IN SWIMMING POOLS - SAFETY REQUIREMENTS AND TEST METHODS (ISO 20380:2017) |
EN 13451-10:2014 | Swimming pool equipment - Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment |
PREN 13451-10 : DRAFT 2016 | SWIMMING POOL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT |
DIN EN 1069-1:2015-09 (Draft) | WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
PREN 17125 : DRAFT 2017 | DOMESTIC SPAS AND HOT TUBS - SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 13451-3:2016-06 | Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features (includes Amendment A3:2016) |
DIN EN 13451-4:2014-12 | SWIMMING POOL EQUIPMENT - PART 4: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR STARTING PLATFORMS |
UNE-EN 13451-4:2015 | Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms |
EN 13451-1:2011+A1:2016 | Swimming pool equipment - Part 1: General safety requirements and test methods |
I.S. EN 13451-2:2015 | SWIMMING POOL EQUIPMENT - PART 2: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LADDERS, STEPLADDERS AND HANDLE BENDS |
UNI EN 13451-4 : 2014 | SWIMMING POOL EQUIPMENT - PART 4: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR STARTING PLATFORMS |
UNI EN 13451-11 : 2014 | SWIMMING POOL EQUIPMENT - PART 11: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR MOVEABLE POOL FLOORS AND MOVEABLE BULKHEADS |
UNI EN 13451-5 : 2014 | SWIMMING POOL EQUIPMENT - PART 5: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LANE LINES AND DIVIDING LINE |
PREN 13451-2 : DRAFT 2013 | SWIMMING POOL EQUIPMENT - PART 2: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LADDERS, STEPLADDERS AND HANDLE BENDS |
PREN 13451-11 : DRAFT 2016 | SWIMMING POOL EQUIPMENT - PART 11: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR MOVEABLE POOL FLOORS AND MOVEABLE BULKHEADS |
08/30181449 DC : DRAFT JULY 2008 | BS EN 1069-2 - WATER SLIDES - PART 2: INSTRUCTIONS |
15/30325364 DC : 0 | BS EN 1069-2 - WATER SLIDES - PART 2: INSTRUCTIONS |
BS EN ISO 20380:2017 | Public swimming pools. Computer vision systems for the detection of drowning accidents in swimming pools. Safety requirements and test methods |
16/30341161 DC : 0 | BS EN 13451-10 - SWIMMING PL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT |
DIN EN 13451-10:2016-08 (Draft) | SWIMMING POOL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT |
BS EN 1069-2:2017 | Water slides Instructions |
BS EN 13451-3 : 2011 | SWIMMING POOL EQUIPMENT - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR INLETS AND OUTLETS AND WATER/AIR BASED WATER LEISURE FEATURES |
BS EN 1069-1:2017 | Water slides Safety requirements and test methods |
BS EN 13451-2:2015 | Swimming pool equipment Additional specific safety requirements and test methods for ladders, stepladders and handle bends |
13/30281468 DC : 0 | BS EN 13451-4 - SWIMMING POOL EQUIPMENT - PART 4: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR STARTING PLATFORMS |
15/30325361 DC : 0 | BS EN 1069-1 - WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
17/30358108 DC : 0 | BS EN 17125 - DOMESTIC SPAS AND HOT TUBS - SAFETY REQUIREMENTS AND TEST METHODS |
12/30270970 DC : 0 | BS EN 13451-5 - SWIMMING POOL EQUIPMENT - PART 5: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LANE LINES AND DIVIDING LINE |
PREN 13451-3 : DRAFT 2009 | SWIMMING POOL EQUIPMENT - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR INLETS AND OUTLETS AND WATER/AIR BASED WATER LEISURE FEATURES |
09/30208786 DC : DRAFT NOV 2009 | BS EN 13451-3 - SWIMMING POOL EQUIPMENT - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR INLETS AND OUTLETS AND WATER/AIR BASED WATER LEISURE FEATURES |
PREN 13451-4 : DRAFT 2013 | SWIMMING POOL EQUIPMENT - PART 4: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR STARTING PLATFORMS |
PREN 1069-1 : DRAFT 2015 | WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
UNE-EN 13451-10:2014 | Swimming pool equipment - Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment |
I.S. EN 13451-10:2014 | SWIMMING POOL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT |
UNI EN 13451-10 : 2014 | SWIMMING POOL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT |
UNE-EN 1069-1:2017 | Water slides - Part 1: Safety requirements and test methods |
DIN EN 1069-2:2015-09 (Draft) | WATER SLIDES - PART 2: INSTRUCTIONS |
UNE-EN 1069-2:2017 | Water slides - Part 2: Instructions |
BS EN 13451-4:2014 | Swimming pool equipment Additional specific safety requirements and test methods for starting platforms |
EN 13451-4:2014 | Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms |
EN 13451-3:2011+A3:2016 | Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features |
EN 13451-5:2014 | Swimming pool equipment - Part 5: Additional specific safety requirements and test methods for lane lines and dividing line |
UNE-EN 13451-3:2012 | Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features |
UNE-EN 13451-1:2012 | Swimming pool equipment - Part 1: General safety requirements and test methods |
EN 14387:2004+A1:2008 | Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking |
EN 374-1:2003 | Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements |
CEN/CLC Guide 6:2014 | Guide for addressing accessibility in standards |
89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
EN ISO 14121-1:2007 | Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) |
EN 1146:2005 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking |
EN 132:1998 | Respiratory protective devices - Definitions of terms and pictograms |
EN 13451-11:2014 | Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads |
EN 134:1998 | Respiratory protective devices - Nomenclature of components |
EN 13451-7:2001 | Swimming pool equipment - Part 7: Additional specific safety requirements and test methods for water polo goals |
EN ISO 7731:2008 | Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) |
EN 13451-4:2014 | Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms |
ISO 14121-1:2007 | Safety of machinery Risk assessment Part 1: Principles |
ISO 7731:2003 | Ergonomics Danger signals for public and work areas Auditory danger signals |
EN 133:2001 | Respiratory protective devices - Classification |
EN 12911:2013 | Products used for treatment of water intended for human consumption - Manganese greensand |
EN 13451-1:2011+A1:2016 | Swimming pool equipment - Part 1: General safety requirements and test methods |
ISO 7001:2007 | Graphical symbols — Public information symbols |
BS PAS 39(2003) : 2003 | MANAGEMENT OF PUBLIC SWIMMING POOLS - WATER TREATMENT SYSTEMS, WATER TREATMENT PLANT AND HEATING AND VENTILATION SYSTEMS - CODE OF PRACTICE |
EN 12671:2016 | Chemicals used for treatment of water intended for human consumption - Chlorine dioxide generated in situ |
EN 13451-5:2014 | Swimming pool equipment - Part 5: Additional specific safety requirements and test methods for lane lines and dividing line |
EN 13451-6:2001 | Swimming pool equipment - Part 6: Additional specific safety requirements and test methods for turning boards |
EN 340:2003 | Protective clothing - General requirements |
EN 170:2002 | Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use |
EN 135:1998 | Respiratory protective devices - List of equivalent terms |
EN 13451-10:2014 | Swimming pool equipment - Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment |
BS PAS 65(2004) : 2004 | MANAGEMENT OF PUBLIC SWIMMING POOLS - GENERAL MANAGEMENT - CODE OF PRACTICE |
EN 12083:1998 | Respiratory protective devices - Filters with breathing hoses, (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking |
EN 1836:2005+A1:2007 | Personal eye-equipment - Sunglasses and sunglare filters for general use and filters for direct observation of the sun |
ISO 20712-1:2008 | Water safety signs and beach safety flags Part 1: Specifications for water safety signs used in workplaces and public areas |
EN 13451-8:2001 | Swimming pool equipment - Part 8: Additional specific safety requirements and test methods for leisure water features |
EN 13451-2:2015 | SWIMMING POOL EQUIPMENT - PART 2: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR LADDERS, STEPLADDERS AND HANDLE BENDS |
EN 13451-3:2011+A3:2016 | Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.