EN 15440 : 2011 COR 2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF BIOMASS CONTENT
12-02-2021
12-01-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Principle
6 Determination of biomass content
7 Calculation
8 Expression of results
9 Test report
Annex A (normative) - Determination of biomass content using
the selective dissolution method
Annex B (normative) - Determination of biomass content using
the manual sorting method
Annex C (normative) - Determination of the biomass content based
on the [14]C method
Annex D (informative) - Limitations of the determination methods
Annex E (informative) - Materials considered as CO[2]-neutral
Annex F (informative) - Performance data
Bibliography
Defines three normative methods for the determination of the biomass fraction in solid recovered fuel, and when to use each method.
Committee |
TC 343
|
DevelopmentNote |
Supersedes CEN/TS 15440 and CEN/TS 15747. (03/2011) Supersedes PREN 15440. (08/2011)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
UNE-EN 15440:2012 | Identical |
NBN EN 15440 : 2011 COR 2011 | Identical |
DIN EN 15440 Berichtigung 1:2012-10 | Identical |
NEN EN 15440 : 2011 C1 2011 | Identical |
SN EN 15440 : 2011 CORR 2012 | Identical |
NS EN 15440 : 2011 AC 2011 | Identical |
UNI EN 15440 : 2011 | Identical |
I.S. EN 15440:2011 | Identical |
BS EN 15440:2011 | Identical |
NF EN 15440 : 2011 | Identical |
PN EN 15440 : 2011 AC 2011 | Identical |
DIN EN 15440:2011-05 | Identical |
ISO 16620-2:2015 | Plastics Biobased content Part 2: Determination of biobased carbon content |
BS EN 16640:2017 | Bio-based products. Bio-based carbon content. Determination of the bio-based carbon content using the radiocarbon method |
BS EN 15357:2011 | Solid recovered fuels. Terminology, definitions and descriptions |
BS EN 19694-3:2016 | Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries Cement industry |
DIN EN 16640:2015-09 (Draft) | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
BS EN 19694-5:2016 | Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries Lime industry |
14/30291633 DC : 0 | BS ISO 16620-2 - PLASTICS - BIOBASED CONTENT - PART 2: DETERMINATION OF BIOBASED CARBON CONTENT |
UNI EN 15442 : 2011 | SOLID RECOVERED FUELS - METHODS FOR SAMPLING |
I.S. EN 19694-1:2016 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 1: GENERAL ASPECTS |
I.S. EN 19694-2:2016 | STATIONARY SOURCE EMISSIONS - GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 2: IRON AND STEEL INDUSTRY |
S.R. CEN/TS 16640:2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
I.S. EN 15359:2011 | SOLID RECOVERED FUELS - SPECIFICATIONS AND CLASSES |
UNI CEN/TS 16137 : 2011 | PLASTICS - DETERMINATION OF BIO-BASED CARBON CONTENT |
I.S. EN 16640:2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
EN 15357:2011 | Solid recovered fuels - Terminology, definitions and descriptions |
CEN/TR 16227:2011 | Liquid petroleum products - Bio-lubricants - Recommendation for terminology and characterisation of bio-lubricants and bio-based lubricants |
CEN/TS 16640:2014 | Bio-based products - Determination of the bio based carbon content of products using the radiocarbon method |
EN 15402:2011 | Solid recovered fuels - Determination of the content of volatile matter |
I.S. EN 15442:2011 | SOLID RECOVERED FUELS - METHODS FOR SAMPLING |
UNI EN 15400 : 2011 | SOLID RECOVERED FUELS - DETERMINATION OF CALORIFIC VALUE |
14/30303591 DC : 0 | BS EN ISO 19694-1 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 1: GENERAL ASPECTS |
UNE-EN 15400:2011 | Solid recovered fuels - Determination of calorific value |
UNE-EN 15357:2012 | Solid recovered fuels - Terminology, definitions and descriptions |
I.S. EN ISO 13833:2013 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE RATIO OF BIOMASS (BIOGENIC) AND FOSSIL-DERIVED CARBON DIOXIDE - RADIOCARBON SAMPLING AND DETERMINATION (ISO 13833:2013) |
I.S. EN 19694-3:2016 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 3: CEMENT INDUSTRY |
S.R. CEN/TS 16137:2011 | PLASTICS - DETERMINATION OF BIO-BASED CARBON CONTENT |
XP T47 765 : 2011 XP | END OF LIFE TYRES (ELT) - CHARACTERISATION OF GRANULATES FROM GRANULATION PROCESSES - GUIDANCE FOR A TESTING CAMPAIGN |
DIN EN 16640:2017-08 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
DIN EN 15442:2011-05 | Solid recovered fuels - Methods for sampling; German version EN 15442:2011 |
BS ISO 18466:2016 | Stationary source emissions. Determination of the biogenic fraction in C O<sub>2</sub> in stack gas using the balance method |
BS EN 15442:2011 | Solid recovered fuels. Methods for sampling |
DIN EN 15359:2012-01 | Solid recovered fuels - Specifications and classes |
BS EN 15400:2011 | Solid recovered fuels. Determination of calorific value |
UNE-EN 16807:2017 | Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants |
EN 15400:2011 | Solid recovered fuels - Determination of calorific value |
UNE-CEN/TS 16137:2012 EX | Plastics - Determination of bio-based carbon content |
NF EN 15400 : 2011 | SOLID RECOVERED FUELS - DETERMINATION OF CALORIFIC VALUE |
ISO 18466:2016 | Stationary source emissions — Determination of the biogenic fraction in CO2 in stack gas using the balance method |
UNI CEN/TR 16227 : 2011 | LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - RECOMMENDATION FOR TERMINOLOGY AND CHARACTERISATION OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS |
UNE-EN 16640:2017 | Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method. (Consolidated version) |
EN ISO 13833:2013 | Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination (ISO 13833:2013) |
EN 15442:2011 | Solid recovered fuels - Methods for sampling |
14/30303607 DC : 0 | BS EN ISO 19694-5 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 5: LIME INDUSTRY |
UNI EN 15359 : 2011 | SOLID RECOVERED FUELS - SPECIFICATIONS AND CLASSES |
DIN EN 15400:2011-05 | Solid recovered fuels - Determination of calorific value |
BS EN 19694-1:2016 | Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries General aspects |
UNE-EN 15359:2012 | Solid recovered fuels - Specifications and classes |
PD CEN/TR 16721:2014 | Bio-based products. Overview of methods to determine the bio-based content |
UNI EN 15357 : 2011 | SOLID RECOVERED FUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
DD CEN/TS 16137:2011 | Plastics. Determination of bio-based carbon content |
BS EN 15359:2011 | Solid recovered fuels. Specifications and classes |
BS EN ISO 13833:2013 | Stationary source emissions. Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide. Radiocarbon sampling and determination |
BS EN 16807:2016 | Liquid petroleum products. Bio-lubricants. Criteria and requirements of bio-lubricants and bio-based lubricants |
15/30326869 DC : 0 | BS EN 16640 - BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
UNI CEN/TS 16640 : 2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
I.S. EN 16807:2016 | LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - CRITERIA AND REQUIREMENTS OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS |
UNI EN ISO 13833 : 2013 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE RATIO OF BIOMASS (BIOGENIC) AND FOSSIL-DERIVED CARBON DIOXIDE - RADIOCARBON SAMPLING AND DETERMINATION |
BS ISO 16620-2:2015 | Plastics. Biobased content Determination of biobased carbon content |
ASTM D 6866 : 2018 : REDLINE | Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis |
I.S. EN 15400:2011 | SOLID RECOVERED FUELS - DETERMINATION OF CALORIFIC VALUE |
ISO 13833:2013 | Stationary source emissions Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide Radiocarbon sampling and determination |
EN 19694-3:2016 | Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 3: Cement industry |
EN 19694-1:2016 | Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 1: General aspects |
EN 19694-5:2016 | Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 5: Lime industry |
EN 16807:2016 | Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants |
EN 19694-2:2016 | Stationary source emissions - Greenhouse Gas (GHG) emissions in energy-intensive industries - Part 2: Iron and steel industry |
DIN EN 16640 E : 2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
UNE-EN 15442:2012 | Solid recovered fuels - Methods for sampling |
DIN EN ISO 13833:2013-07 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE RATIO OF BIOMASS (BIOGENIC) AND FOSSIL-DERIVED CARBON DIOXIDE - RADIOCARBON SAMPLING AND DETERMINATION (ISO 13833:2013) |
14/30312370 DC : 0 | BS EN 16807 - LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - CRITERIA AND REQUIREMENTS OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS |
UNE-EN ISO 13833:2013 | Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination (ISO 13833:2013) |
PD CEN/TS 16640:2014 | Bio-based products. Determination of the bio based carbon content of products using the radiocarbon method |
DIN EN 15357:2011-05 | Solid recovered fuels - Terminology, definitions and descriptions |
16/30275160 DC : 0 | BS ISO 18466 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE BIOGENIC FRACTION IN CO[2]IN STACK GAS USING THE BALANCE METHOD |
PD CEN/TR 16227:2011 | Liquid petroleum products. Bio-lubricants. Recommendation for terminology and characterisation of bio-lubricants and bio-based lubricants |
S.R. CEN/TR 16721:2014 | BIO-BASED PRODUCTS - OVERVIEW OF METHODS TO DETERMINE THE BIO-BASED CONTENT |
I.S. EN 19694-5:2016 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 5: LIME INDUSTRY |
S.R. CEN/TR 16227:2011 | LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - RECOMMENDATION FOR TERMINOLOGY AND CHARACTERISATION OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS |
I.S. EN 15357:2011 | SOLID RECOVERED FUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
EN 15359:2011 | Solid recovered fuels - Specifications and classes |
CEN/TR 16721:2014 | Bio-based products - Overview of methods to determine the bio-based content |
CEN/TS 16137:2011 | Plastics - Determination of bio-based carbon content |
EN 15357:2011 | Solid recovered fuels - Terminology, definitions and descriptions |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
CEN/TR 14980:2004 | Solid recovered fuels - Report on relative difference between biodegradable and biogenic fractions of SRF |
EN 15407:2011 | Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H) and nitrogen (N) content |
CEN/TS 15414-1:2010 | Solid recovered fuels - Determination of moisture content using the oven dry method - Part 1: Determination of total moisture by a reference method |
PREN 15413 : DRAFT 2010 | SOLID RECOVERED FUELS - METHODS FOR THE PREPARATION OF THE TEST SAMPLE FROM THE LABORATORY SAMPLE |
EN 15296:2011 | Solid biofuels - Conversion of analytical results from one basis to another |
EN 15442:2011 | Solid recovered fuels - Methods for sampling |
EN 15443:2011 | Solid recovered fuels - Methods for the preparation of the laboratory sample |
EN 15400:2011 | Solid recovered fuels - Determination of calorific value |
EN 15403:2011 | Solid recovered fuels - Determination of ash content |
CEN/TR 15591:2007 | Solid recovered fuels - Determination of the biomass content based on the 14C method |
ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
ASTM D 7026 : 2013 | Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis (Withdrawn 2020) |
EN 14775:2009 | Solid biofuels - Determination of ash content |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.