Skip to content
Please enter a keyword to search

  • EN 15836-2:2010

    Current The latest, up-to-date edition.

    Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm

    Available format(s): 

    Language(s): 

    Published date:  23-06-2010

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Terms, definitions, symbols and abbreviations
    4 Sampling and conditioning
    5 Membrane composition
    6 Visual characteristics
    7 Physico-chemical characteristic
    8 Dimensional characteristics
    9 Mechanical characteristics
    10 Characteristics for durability
    11 Storage conditions
    12 Installation, refurbishment, exploitation and
       maintenance
    13 Designation and marking
    Annex A (normative) - Determination of the contents
            of CaCO[3], heavy metals and other elements
    Annex B (normative) - Testing of slip resistance
    Annex C (normative) - Assessment of chlorine resistance
    Annex D (normative) - Assessment of the resistance to
            staining agents
    Bibliography

    Abstract - (Show below) - (Hide below)

    This European Standard specifies the visual, dimensional, mechanical and durability characteristics of reinforced membranes made of plasticized poly(vinyl chloride) (PVC-P) sheets assembled together a polyester reinforcement, whose nominal thickness is greater than or equal to 1,5 mm, intended to be used to contribute to the leaktightness of inground swimming pools, implemented in situ. It also specifies the characteristics of the composition of the PVC-P used to produce the membranes.It applies specifically to reinforced membranes intended for use in swimming pools where the water temperature is less than or equal to 32 °C. If the membrane manufacturer permits a temperature of water continuously maintained above 32 °C, this document also applies.

    General Product Information - (Show below) - (Hide below)

    Committee CEN/TC 249
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    13/30279623 DC : 0 BS EN 16582-2 - DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENT INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS
    DIN EN 16927 E : 2017 MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
    I.S. EN 16927:2017 MINI-POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI-POOLS
    I.S. EN 16582-2:2015 DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS
    15/30328805 DC : 0 BS EN 16927 - MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
    UNE-EN 16582-2:2015 Domestic swimming pools - Part 2: Specific requirements including safety and test methods for inground pools
    DIN EN 16927:2017-05 MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
    DIN EN 16582-1 E : 2015 DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
    I.S. EN 16582-1:2015 DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
    UNE-EN 16582-1:2015 Domestic swimming pools - Part 1: General requirements including safety and test methods
    DIN EN 16582-2 E : 2015 DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS
    13/30279620 DC : 0 BS EN 16582-1 - DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
    BS EN 16582-1:2015 Domestic swimming pools General requirements including safety and test methods
    EN 16582-2:2015 Domestic swimming pools - Part 2: Specific requirements including safety and test methods for inground pools
    EN 16927:2017 Mini-pools - Specific requirements including safety and test methods for mini-pools
    DIN EN 16582-2:2015-11 DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS
    BS EN 16582-2:2015 Domestic swimming pools Specific requirements including safety and test methods for inground pools
    EN 16582-1:2015 Domestic swimming pools - Part 1: General requirements including safety and test methods
    BS EN 16927:2017 Mini-pools. Specific requirements including safety and test methods for mini-pools
    DIN EN 16582-1:2015-11 Domestic swimming pools - Part 1: General requirements including safety and test methods
    UNE-EN 16927:2017 Mini-pools - Specific requirements including safety and test methods for mini-pools
    DIN EN 16927:2015-10 (Draft) MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 7724-1:1984 Paints and varnishes Colorimetry Part 1: Principles
    EN ISO 62:2008 Plastics - Determination of water absorption (ISO 62:2008)
    EN ISO 5470-1:2016 Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016)
    EN 1107-2 : 2001 Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing
    EN 1849-2:2009 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
    EN 495-5:2013 Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing
    EN 1848-2 : 2001 FLEXIBLE SHEETS FOR WATER-PROOFING - DETERMINATION OF LENGTH, WIDTH, STRAIGHTNESS AND FLATNESS - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING
    EN 15346:2014 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
    ISO 7724-2:1984 Paints and varnishes Colorimetry Part 2: Colour measurement
    EN 12311-2:2013 Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing
    ISO 846:1997 Plastics Evaluation of the action of microorganisms
    EN 14902:2005/AC:2006 AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF PB, CD, AS AND NI IN THE PM10 FRACTION OF SUSPENDED PARTICULATE MATTER
    ISO 12572:2016 Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method
    EN 12310-2:2000 FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF RESISTANCE TO TEARING - PART 2: PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING
    EN ISO 12572:2016 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016)
    EN 12316-2:2013 Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
    ISO 7724-3:1984 Paints and varnishes Colorimetry Part 3: Calculation of colour differences
    EN 13451-1:2011+A1:2016 Swimming pool equipment - Part 1: General safety requirements and test methods
    ISO 175:2010 Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
    ISO 5470-1:2016 Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 1: Taber abrader
    EN 15347:2007 Plastics - Recycled Plastics - Characterisation of plastics wastes
    ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
    EN ISO 846 : 1997 PLASTICS - EVALUATION OF THE ACTION OF MICROORGANISMS
    ISO 62:2008 Plastics Determination of water absorption
    EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
    ISO 4892-2:2013 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
    EN 438-2:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
    EN 20105-A02 : 1994 TEXTILES - TESTS FOR COLOUR FASTNESS - PART A02: GREYSCALE FOR ASSESSING CHANGE IN COLOUR (ISO 105-A02:1993)
    ISO 105-A02:1993 Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour
    EN ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
    EN 1850-2 : 2001 FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF VISIBLE DEFECTS - PART 2: PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING
    EN ISO 175:2010 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective