EN 16286-2:2013
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements
30-09-2013
27-03-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Instrumentation and calibration
5 Measurement setup
6 Test procedure
7 Presentation of results
8 Quality of the measurements
9 Test report
Annex A (normative) - Method to qualify the sound field
on the surface of the test specimen in the
source room
Bibliography
This European Standard specifies a measurement method and conditions to obtain reproducible and comparable sound reduction indices of all kinds of rail bound vehicles’ gangway systems defined in EN 16286-1. The setup should include all components of the system mounted like this is done between two adjacent car bodies within the train, so that a person will be able to use the gangway system, consisting of e.g:-the bridge system (footplate);-side panels;-flexible components (bellows);-mounting systems;-elements to couple parts in case of separable gangway systems.If separable gangway systems shall be measured, the whole system between two adjacent car bodies should be used.The method is applicable to type testing of gangways. This method is not applicable to:-interior noise measurements in vehicles;-structure borne noise measurements.The type testing procedures specified in this European Standard are of engineering grade (grade 2) in the frequency range from 100 Hz up to 5 kHz; that is the preferred range for noise declaration purposes, as defined in EN ISO 12001. If test conditions are relaxed, the results are no longer of engineering grade.
| Committee |
CEN/TC 256
|
| DevelopmentNote |
Supersedes PREN 16286-2. (04/2013)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Standards | Relationship |
| DS EN 16286-2 : 2013 | Identical |
| UNI EN 16286-2 : 2013 | Identical |
| PN EN 16286-2 : 2013 | Identical |
| BS EN 16286-2:2013 | Identical |
| I.S. EN 16286-2:2013 | Identical |
| UNE-EN 16286-2:2014 | Identical |
| SN EN 16286-2 : 2013 | Identical |
| NEN EN 16286-2 : 2013 | Identical |
| DIN EN 16286-2:2013-09 | Identical |
| NF EN 16286-2 : 2013 | Identical |
| NBN EN 16286-2 : 2013 | Identical |
| NS EN 16286-2 : 2013 | Identical |
| ONORM EN 16286-2 : OCT 2013 | Identical |
| BS EN 16286-1:2013 | Railway applications. Gangway systems between vehicles Main applications |
| I.S. EN 15663:2017 | RAILWAY APPLICATIONS - VEHICLE REFERENCE MASSES |
| UNI EN 16286-1 : 2013 | RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 1: MAIN APPLICATIONS |
| I.S. EN 16286-1:2013 | RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 1: MAIN APPLICATIONS |
| DIN EN 15663:2015-11 (Draft) | RAILWAY APPLICATIONS - VEHICLE REFERENCE MASSES |
| 15/30309997 DC : 0 | BS EN 15663 - RAILWAY APPLICATIONS - VEHICLE REFERENCE MASSES |
| EN 15663:2017 | Railway applications - Vehicle reference masses |
| BS EN 15663:2009 | Railway applications. Definition of vehicle reference masses |
| EN 16286-1:2013 | Railway applications - Gangway systems between vehicles - Part 1: Main applications |
| DIN EN 16286-1:2013-06 | Railway applications - Gangway systems between vehicles - Part 1: Main applications |
| UNE-EN 16286-1:2014 | Railway applications - Gangway systems between vehicles - Part 1: Main applications |
| DIN EN 15663:2017-09 | RAILWAY APPLICATIONS - VEHICLE REFERENCE MASSES |
| IEC 61672-2:2013+AMD1:2017 CSV | Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests |
| ISO 12001:1996 | Acoustics — Noise emitted by machinery and equipment — Rules for the drafting and presentation of a noise test code |
| ISO 10140-2:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation |
| EN 16286-1:2013 | Railway applications - Gangway systems between vehicles - Part 1: Main applications |
| EN 61043:1994 | Electroacoustics - Instruments for the measurement of sound intensity - Measurement with pairs of pressure sensing microphones |
| EN 61672-2:2013/A1:2017 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS (IEC 61672-2:2013/A1:2017) |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
| IEC 60942:2003 | Electroacoustics - Sound calibrators |
| ISO 266:1997 | Acoustics — Preferred frequencies |
| IEC 61043:1993 | Electroacoustics - Instruments for the measurement of sound intensity - Measurements with pairs of pressure sensing microphones |
| EN ISO 10140-4:2010 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2010) |
| ISO 10140-1:2016 | Acoustics Laboratory measurement of sound insulation of building elements Part 1: Application rules for specific products |
| EN ISO 3741:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| EN ISO 10140-1:2016 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016) |
| ISO 10140-4:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 4: Measurement procedures and requirements |
| EN ISO 12001:2009 | Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
| EN 61672-1:2013 | Electroacoustics - Sound level meters - Part 1: Specifications |
| ISO 1996-1:2016 | Acoustics Description, measurement and assessment of environmental noise Part 1: Basic quantities and assessment procedures |
| EN ISO 10140-2:2010 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010) |
| EN ISO 9614-2:1996 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996) |
| ENV 13005 : DRAFT 1999 | GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
| ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
| EN ISO 15186-1:2003 | Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1: Laboratory measurements (ISO 15186-1:2000) |
| ISO 3741:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms |
| ISO 10140-3:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation |
| ISO 10140-5:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment |
| EN ISO 266:1997 | Acoustics - Preferred frequencies (ISO 266:1997) |
| ISO 15186-1:2000 | Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 1: Laboratory measurements |
| EN 60942:2003 | Electroacoustics - Sound calibrators |
| EN ISO 9614-1:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.