EN 170:2002
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use
Superseded date
07-05-2022
Published date
23-10-2002
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designation and identification
5 Requirements
5.1 General
5.2 Transmittance requirements
5.3 Ocular with enhanced colour recognition (optional)
Annex A (normative) Relative visual attenuation quotient
for signal light recognition
Annex B (informative) Guidance on selection and use
Annex C (informative) Uncertainty of measurement and results
interpretation
Annex ZA (informative) Clauses of this European Standard
addressing essential requirements or other provisions
of EU Directives
Bibliography
This European Standard specifies the scale numbers and transmittance requirements for filters for protection against ultraviolet radiation. The other applicable requirements for these types of filters are given in EN 166:1995. Guidance on the selection and use of these filters are given in Annex A. NOTE: The protective filters specified in this standard are not suitable for the direct or indirect observation of an electric arc. For this purpose a welding filter appropriate to the source being observed should be used. Such a filter would not have a scale number less than 6.
| Committee |
CEN/TC 85
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| ONORM EN 170 : 2003 | Identical |
| UNE-EN 170:2003 | Identical |
| NBN EN 172 : 1995 AMD 2 2001 | Identical |
| NF EN 170 : 2003 | Identical |
| PN EN 170 : 2005 | Identical |
| NBN EN 165 : 2006 | Identical |
| UNI EN 170 : 2003 | Identical |
| I.S. EN 170:2002 | Identical |
| NBN EN 12941 : 1998 AMD 2 2009 | Identical |
| BS EN 170:2002 | Identical |
| NBN EN 170 : 2002 | Identical |
| NEN EN 170 : 2002 | Identical |
| NS EN 170 : 2ED 2002 | Identical |
| SN EN 170 : 2002 | Identical |
| DIN EN 170:2003-01 | Identical |
| UNE 81113:1990 | Identical |
| DIN EN 15288-2:2009-05 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| I.S. EN 1836:2005 | PERSONAL EYE-EQUIPMENT - SUNGLASSES AND SUNGLARE FILTERS FOR GENERAL USE AND FILTERS FOR DIRECT OBSERVATION OF THE SUN |
| BS ISO 11999-1:2015 | PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures General |
| 17/30360256 DC : 0 | BS EN 15288-2 - SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| UNE-EN ISO 15858:2017 | UV-C Devices - Safety information - Permissible human exposure (ISO 15858:2016) |
| DIN EN 1836:2007-11 | PERSONAL EYE-EQUIPMENT - SUNGLASSES AND SUNGLARE FILTERS FOR GENERAL USE AND FILTERS FOR DIRECT OBSERVATION OF THE SUN |
| BS EN 172:1995 | Specification for sunglare filters used in personal eye-protectors for industrial use |
| ISO 11553-2:2007 | Safety of machinery Laser processing machines Part 2: Safety requirements for hand-held laser processing devices |
| I.S. EN 166:2002 | PERSONAL EYE-PROTECTION - SPECIFICATIONS |
| 14/30248310 DC : 0 | BS EN ISO 15858 - UV-C DEVICES - SAFETY INFORMATION - PERMISSIBLE HUMAN EXPOSURE |
| BS EN ISO 11553-1:2008 | Safety of machinery. Laser processing machines General safety requirements |
| DIN EN 1836:1997-03 | PERSONAL EYE-EQUIPMENT - SUNGLASSES AND SUNGLARE FILTERS FOR GENERAL USE AND FILTERS FOR DIRECT OBSERVATION OF THE SUN |
| DIN EN 12255-14:2004-03 | Wastewater treatment plants - Part 14: Disinfection |
| DIN EN 14255-1:2005-06 | Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: Ultraviolet radiation emitted by artificial sources in the workplace |
| I.S. EN 12255-14:2004 | WASTEWATER TREATMENT PLANTS - PART 14: DISINFECTION |
| 06/30154243 DC : DRAFT AUG 2006 | ISO 16073 - WILDLAND FIREFIGHTING PERSONAL PROTECTIVE EQUIPMENT - REQUIREMENTS AND TEST METHODS |
| PREN 14458 : DRAFT 2016 | PERSONAL EYE-EQUIPMENT - HIGH PERFORMANCE VISORS INTENDED ONLY FOR USE WITH PROTECTIVE HELMETS |
| PREN 14594 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| DIN EN 14458:2016-09 (Draft) | PERSONAL EYE-EQUIPMENT - FACESHIELDS AND VISORS FOR USE WITH FIREFIGHTERS' AND HIGH PERFORMANCE INDUSTRIAL SAFETY HELMETS USED BY FIREFIGHTERS, AMBULANCE AND EMERGENCY SERVICES |
| DIN EN 12941:2009-02 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| DIN EN 12942:2009-02 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| DIN EN ISO 11553-1:2009-03 | Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005) |
| UNI EN ISO 11553-1 : 2009 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS |
| I.S. EN ISO 11553-2:2008 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES |
| DIN EN 1731:2007-02 | Personal eye protection - Mesh eye and face protectors |
| I.S. EN 1731:2006 | PERSONAL EYE PROTECTION - MESH EYE AND FACE PROTECTORS |
| I.S. EN 12942:1999 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| BS EN 14594:2005 | Respiratory protective devices. Continuous flow compressed air line breathing apparatus. Requirements, testing, marking |
| 04/30096910 DC : DRAFT OCT 2004 | ISO 11553-2 - SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND OPERATED LASER PROCESSING DEVICES |
| 05/30133728 DC : DRAFT MAY 2005 | EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| PREN 12942 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - POWER FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| 16/30337083 DC : 0 | BS EN 14458 - PERSONAL EYE-EQUIPMENT - HIGH PERFORMANCE VISORS INTENDED ONLY FOR USE WITH PROTECTIVE HELMETS |
| DIN EN ISO 11553-2:2009-03 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES |
| UNI EN 12942 : 2009 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| UNI EN 12941 : 2009 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| UNI EN 1731 : 2007 | PERSONAL EYE PROTECTION - MESH EYE AND FACE PROTECTORS |
| UNI EN ISO 11553-2 : 2009 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES |
| EN 12255-14:2003 | Wastewater treatment plants - Part 14: Disinfection |
| BS EN 15288-2:2008 | Swimming pools Safety requirements for operation |
| 17/30348244 DC : 0 | BS EN 14594 - RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| ONORM EN 14594 : 2005 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| DIN EN 14594:2005-07 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| BS EN 14458:2004 | Personal eye-equipment. Faceshields and visors for use with firefighters and high performance industrial safety helmets used by firefighters, ambulance and emergency services |
| I.S. EN 12941:1998 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| 05/30084794 DC : DRAFT MAR 2005 | EN 1731 - MESH TYPE EYE AND FACE PROTECTORS FOR INDUSTRIAL AND NON-INDUSTRIAL USE AGAINST MECHANICAL HAZARDS AND/OR HEAT |
| 07/30168636 DC : 0 | BS EN 166 - PERSONAL EYE-PROTECTION - SPECIFICATIONS |
| 02/565107 DC : DRAFT DEC 2002 | BS EN 14594 - RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 15288-2:2008 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| I.S. EN 14594:2005 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| BS ISO 16073:2011 | Wildland firefighting personal protective equipment. Requirements and test methods |
| EN 14458:2004 | Personal eye-equipment - Faceshields and visors for use with firefighters' and high performance industrial safety helmets used by firefighters, ambulance and emergency services |
| EN 14594:2018 | Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking |
| EN 15288-2:2008 | Swimming pools - Part 2: Safety requirements for operation |
| UNI EN 15288-2 : 2009 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| I.S. EN 14458:2004 | PERSONAL EYE-EQUIPMENT - FACESHIELDS AND VISORS FOR USE WITH FIREFIGHTERS' AND HIGH PERFORMANCE INDUSTRIAL SAFETY HELMETS USED BY FIREFIGHTERS, AMBULANCE AND EMERGENCY SERVICES |
| I.S. EN ISO 11553-1:2008 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS |
| ISO 11553-1:2005 | Safety of machinery Laser processing machines Part 1: General safety requirements |
| BS EN 14255-1:2005 | Measurement and assessment of personal exposures to incoherent optical radiation Ultraviolet radiation emitted by artifical sources in the workplace |
| BS EN ISO 11553-2:2008 | Safety of machinery. Laser processing machines Safety requirements for hand-held laser processing devices |
| BS EN 12941 : 1999 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| BS EN 1836:2005 | Personal eye-equipment. Sunglasses and sunglare filters for general use and filters for direct observation of the sun |
| EN 14255-1:2005 | Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: Ultraviolet radiation emitted by artificial sources in the workplace |
| EN 166:2001 | Personal eye-protection - Specifications |
| EN 1836:2005+A1:2007 | Personal eye-equipment - Sunglasses and sunglare filters for general use and filters for direct observation of the sun |
| EN ISO 11553-2:2008 | Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007) |
| EN ISO 15858:2016 | UV-C Devices - Safety information - Permissible human exposure (ISO 15858:2016) |
| EN 1731:2006 | Personal eye protection - Mesh eye and face protectors |
| 14/30302355 DC : 0 | BS EN ISO 11553-1 ED.2 - SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS |
| PD CEN/TS 17108:2017 | Non-destructive testing. Lighting in penetrant and magnetic particle testing, good practice |
| BS EN ISO 15858:2016 | UV-C Devices. Safety information. Permissible human exposure |
| S.R. CR 13464:1999 | GUIDE TO SELECTION, USE AND MAINTENANCE OF OCCUPATIONAL EYE AND FACE PROTECTORS |
| S.R. CEN/TR 17108:2017 | NON-DESTRUCTIVE TESTING - LIGHTING IN PENETRANT AND MAGNETIC PARTICLE TESTING, GOOD PRACTICE |
| ISO 11999-1:2015 | PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 1: General |
| ISO 16073:2011 | Wildland firefighting personal protective equipment Requirements and test methods |
| EN ISO 11553-1:2008 | Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005) |
| BS EN 12942 : 1999 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| BS EN 1731:2006 | Personal eye protection. Mesh eye and face protectors |
| ISO 15858:2016 | UV-C Devices Safety information Permissible human exposure |
| BS EN 166:2002 | Personal eye protection. Specifications |
| CEN/TR 17108:2017 | Non-destructive testing - Lighting in penetrant and magnetic particle testing, good practice |
| DIN EN 14458:2004-11 | FACESHIELDS AND VISORS FOR USE WITH FIREFIGHTERS' AND HIGH PERFORMANCE INDUSTRIAL SAFETY HELMETS USED BY FIREFIGHTERS, AMBULANCE AND EMERGENCY SERVICES |
| CR 13464:1999 | Guide to selection, use and maintenance of occupational eye and face protectors |
| ONORM EN 12942 : 2009 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| ISO/CIE 10527:1991 | CIE standard colorimetric observers |
| EN 165:2005 | Personal eye-protection - Vocabulary |
| EN 166:2001 | Personal eye-protection - Specifications |
| EN 169:2002 | Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use |
| EN 167:2001 | Personal eye-protection - Optical test methods |
| ISO/CIE 10526:1999 | CIE standard illuminants for colorimetry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.