• Shopping Cart
    There are no items in your cart

EN 1822-1:2009

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking

Superseded date

17-04-2019

Superseded by

EN 1822-1:2019

Published date

18-11-2009

Sorry this product is not available in your region.

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Classification
6 Requirements
7 Test methods
8 Assessment of the filter, documentation,
  test reports
9 Marking
Bibliography

This European Standard applies to high efficiency particulate and ultra low penetration air filters (EPA, HEPA and ULPA) used in the field of ventilation and air conditioning and for technical processes, e.g. for applications in clean room technology or pharmaceutical industry.It establishes a procedure for the determination of the efficiency on the basis of a particle counting method using a liquid (or alternatively a solid) test aerosol, and allows a standardized classification of these filters in terms of their efficiency, both local and integral efficiency.

Committee
CEN/TC 195
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

ISO 29463-1:2017 High efficiency filters and filter media for removing particles from air — Part 1: Classification, performance, testing and marking
I.S. EN 13824:2005 STERILIZATION OF MEDICAL DEVICES - ASEPTIC PROCESSING OF LIQUID MEDICAL DEVICES - REQUIREMENTS
12/30268424 DC : 0 BS EN 12341 - AMBIENT AIR - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM10 OR PM2,5 MASS CONCENTRATION OF SUSPENDED PARTICULATE MATTER
09/30182875 DC : 0 BS ISO 29463-4 - HIGH-EFFICIENCY FILTERS AND FILTER MEDIA FOR REMOVING PARTICLES FROM AIR - PART 4: TEST METHOD FOR DETERMINING THE LEAKAGE OF FILTER ELEMENTS (SCAN METHOD)
13/30242951 DC : 0 BS ISO 16571 - MEDICAL GAS SYSTEMS - SYSTEMS FOR EVACUATION OF PLUME GENERATED BY MEDICAL DEVICES
BS ISO 11057:2011 Air quality. Test method for filtration characterization of cleanable filter media
15/30314073 DC : 0 BS 16913 - AMBIENT AIR - STANDARD METHOD FOR MEASUREMENT OF NO[3][-], SO[4][2-], CL[-], NH[4][+], NA[+], K[+], MG[2+], CA[2+] IN PM2,5
PD CEN/TR 16269:2011 Ambient air. Guide for the measurement of anions and cations in PM2,5
PREN 285 : DRAFT 2013 STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
03/317114 DC : DRAFT OCT 2003 EN 14799 - AIR FILTERS FOR GENERAL AIR CLEANING - TERMINOLOGY
S.R. CEN/TS 16645:2014 AMBIENT AIR - METHOD FOR THE MEASUREMENT OF BENZ[A]ANTHRACENE, BENZO[B]FLUORANTHENE, BENZO[J]FLUORANTHENE, BENZO[K]FLUORANTHENE, DIBENZ[A,H]ANTHRACENE, INDENO[1,2,3-CD]PYRENE AND BENZO[GHI]PERYLENE
AAMI ISO 13408-1 : 2008 : R2011 ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS
DIN EN 1822-4:2011-01 HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 4: DETERMINING LEAKAGE OF FILTER ELEMENTS (SCAN METHOD)
AAMI ST15883-1 : 2009 : INC : AMD 1 : 2014 : R201400 WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS
UNI EN 1822-3 : 2010 HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 3: TESTING FLAT SHEET FILTER MEDIA
DIN EN 1822-5:2011-01 HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 5: DETERMINING THE EFFICIENCY OF FILTER ELEMENTS
NF EN 1822-5 : 2010 HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 5: DETERMINING THE EFFICIENCY OF FILTER ELEMENTS
I.S. EN 1822-5:2009 HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 5: DETERMINING THE EFFICIENCY OF FILTER ELEMENTS
EN 1822-5:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 5: Determining the efficiency of filter elements
UNE-EN 1822-4:2010 High efficiency air filters (EPA, HEPA and ULPA) - Part 4: Determining leakage of filter elements (scan method)
NF EN 1822-4 : 2010 HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 4: DETERMINING LEAKAGE OF FILTER ELEMENTS (SCAN METHOD)
UNI EN 1822-4 : 2010 HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 4: DETERMINING LEAKAGE OF FILTER ELEMENTS (SCAN METHOD)
NF EN 1822-3 : 2010 HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 3: TESTING FLAT SHEET FILTER MEDIA
BS EN 1822-2:2009 High efficiency air filters (EPA, HEPA and ULPA) Aerosol production, measuring equipment, particle counting statistics
BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM<sub>10</sub> or PM<sub>2,5</sub> mass concentration of suspended particulate matter
BS EN ISO 16000-7:2007 Indoor air Sampling strategy for determination of airborne asbestos fibre concentrations
BS EN 1834-3:2000 Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group II engines for use in flammable dust atmospheres
BS EN 13824:2004 Sterilization of medical devices. Aseptic processing of liquid medical devices. Requirements
ISO 13408-1:2008 Aseptic processing of health care products — Part 1: General requirements
DIN EN 15549:2008-06 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
EN 12312-6:2017 Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment
EN 12469:2000 Biotechnology - Performance criteria for microbiological safety cabinets
DIN EN 14907:2005-11 AMBIENT AIR QUALITY - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM[2,5] MASS FRACTION OF SUSPENDED PARTICULATE MATTER
EN 12599:2012 Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems
EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
ASHRAE 161 : 2018 AIR QUALITY WITHIN COMMERCIAL AIRCRAFT
ISO 11057:2011 Air quality — Test method for filtration characterization of cleanable filter media
CAN/CSA-ISO 16571:16 SYSTEMS FOR EVACUATION OF PLUME GENERATED BY MEDICAL DEVICES
BS EN 16442:2015 Controlled environment storage cabinet for processed thermolabile endoscopes
I.S. EN 779:2012 PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE
I.S. EN 14907:2005 AMBIENT AIR QUALITY - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM[2,5] MASS FRACTION OF SUSPENDED PARTICULATE MATTER
12/30260963 DC : 0 BS EN 12341 - AMBIENT AIR - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM 10 OR PM 2,5 MASS CONCENTRATION OF SUSPENDED PARTICULATE MATTER
DIN EN ISO 13408-1:2015-12 Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2008, including Amd 1:2013)
NF ISO 12500-3 : 2009 FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 3: PARTICULATES
PREN 12599 : DRAFT 2010 VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS
BS EN ISO 13408-1:2015 Aseptic processing of health care products General requirements
I.S. EN 1822-4:2009 HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 4: DETERMINING LEAKAGE OF FILTER ELEMENTS (SCAN METHOD)
I.S. EN 16442:2015 CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES
ISO 29463-3:2011 High-efficiency filters and filter media for removing particles in air — Part 3: Testing flat sheet filter media
EN 1822-4:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 4: Determining leakage of filter elements (scan method)
BS EN 1822-3:2009 High efficiency air filters (EPA, HEPA and ULPA) Testing flat sheet filter media
EN 1822-2:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics
I.S. EN 1822-2:2009 HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 2: AEROSOL PRODUCTION, MEASURING EQUIPMENT, PARTICLE COUNTING STATISTICS
BS EN 1822-4:2009 High efficiency air filters (EPA, HEPA and ULPA) Determining leakage of filter elements (scan method)
EN 1822-3:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 3: Testing flat sheet filter media
BS EN 12599:2012 Ventilation for buildings. Test procedures and measurement methods to hand over air conditioning and ventilation systems
BS EN ISO 14644-4:2001 Cleanrooms and associated controlled environments Design, construction and start-up
BS EN 12312-6:2017 Aircraft ground support equipment. Specific requirements Deicers and de-icing/anti-icing equipment
UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
ISO 19859:2016 Gas turbine applications Requirements for power generation
DIN EN 12341:1999-03 AMBIENT AIR - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM[10] OR PM[2],[5] MASS CONCENTRATION OF SUSPENDED PARTICULATE MATTER
I.S. EN 12312-6:2017 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DE-ICING/ANTI-ICING EQUIPMENT
I.S. EN 12599:2012 VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS
I.S. EN 12341:2014 AMBIENT AIR - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM[10] OR PM[2,5] MASS CONCENTRATION OF SUSPENDED PARTICULATE MATTER
VDI 3677 Blatt 2:2004-02 Filtering separators - Depth fiber filters
VDI 4300 Blatt 11:2013-12 Measurement of indoor air pollution - Measurement strategies for determination of airborne particles in indoor environment - PM-fraction
VDI 3678 Blatt 2:2010-12 Electrostatic precipitators - Process air and indoor air cleaning
VDI 6032 Blatt 1:2015-05 Ventilation and indoor-air quality in vehicles - Hygiene requirements for ventilation and air-conditioning systems
VDI 6022 Blatt 5:2016-11 Ventilation and indoor-air quality - Avoidance of allergenic exposure - Requirements regarding the testing and evaluation of technical products and components affecting the indoor air
VDI 6300 Blatt 1:2016-05 Genetic engineering operations in genetic engineering facilities - Guidance on safe operation of genetic engineering facilities
VDI 2464 Blatt 3:2012-07 Ambient air measurement - Indoor air measurement - Measurement of polybrominated diphenylether, hexabromocyclododecane and hexabromobenzene by GC/MS
VDI 2083 Blatt 3:2005-07 Cleanroom technology - Metrology and test methods
12/30248648 DC : DRAFT AUG 2012 BS EN 16442 - CONTROLLED ENVIRONMENT STORAGE CABINET FOR DISINFECTED THERMOLABILE ENDOSCOPES
08/30176852 DC : DRAFT APR 2008 BS EN 1822-4 - HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 4: DETERMINING LEAKAGE OF FILTER ELEMENTS (SCAN METHOD)
08/30176845 DC : DRAFT APR 2008 BS EN 1822-2 - HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 2: AEROSOL PRODUCTION, MEASURING EQUIPMENT, PARTICLE COUNTING STATISTIC
ISO 29463-2:2011 High-efficiency filters and filter media for removing particles in air — Part 2: Aerosol production, measuring equipment and particle-counting statistics
08/30176848 DC : DRAFT APR 2008 BS EN 1822-3 - HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 3: TESTING FLAT SHEET FILTER MEDIA
ISO 16571:2014 Systems for evacuation of plume generated by medical devices
BS ISO 12500-3:2009 Filters for compressed air. Test methods Particulates
13/30278676 DC : 0 BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
BS EN 16913:2017 Ambient air. Standard method for measurement of NO<sub>3</sub><sup>-</sup>, SO<sub>4</sub><sup>2-</sup>, Cl<sup>-</sup>, NH<sub>4</sub><sup>+</sup>, Na<sup>+</sup>, K<sup>+</sup>, Mg<sup>2+</sup>, Ca<sup>2+</sup> in PM2,5 as deposited on filters
10/30235574 DC : 0 BS EN 12599 - VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS
07/30090385 DC : 0 ISO 13408-1 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS
PREN 12341 : DRAFT 2012 AMBIENT AIR - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM 10 OR PM 2,5 MASS CONCENTRATION OF SUSPENDED PARTICULATE MATTER
S.R. CEN/TR 16269:2011 AMBIENT AIR - GUIDE FOR THE MEASUREMENT OF ANIONS AND CATIONS IN PM2,5
AAMI ST15883-1 : 2009 WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS
ANSI/AAMI ST15883-1:2009(R2014) &A1:2014&A2:2012 WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS
ISO 29463-4:2011 High-efficiency filters and filter media for removing particles in air — Part 4: Test method for determining leakage of filter elements-Scan method
UNE-EN 1822-3:2010 High efficiency air filters (EPA, HEPA and ULPA) - Part 3: Testing flat sheet filter media
I.S. EN 1822-3:2009 HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 3: TESTING FLAT SHEET FILTER MEDIA
BS EN 1822-5:2009 High efficiency air filters (EPA, HEPA and ULPA) Determining the efficiency of filter elements
DIN EN 1822-2:2011-01 HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 2: AEROSOL PRODUCTION, MEASURING EQUIPMENT, PARTICLE COUNTING STATISTICS
UNE-EN 1822-2:2010 High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics
DIN EN 1822-3:2011-01 HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 3: TESTING FLAT SHEET FILTER MEDIA
UNI EN 1822-2 : 2010 HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 2: AEROSOL PRODUCTION, MEASURING EQUIPMENT, PARTICLE COUNTING STATISTICS
NF EN 1822-2 : 2010 HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 2: AEROSOL PRODUCTION, MEASURING EQUIPMENT, PARTICLE COUNTING STATISTICS
I.S. EN 15549:2008 AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF BENZO[A]PYRENE IN AMBIENT AIR
UNI EN 1822-5 : 2010 HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 5: DETERMINING THE EFFICIENCY OF FILTER ELEMENTS
DIN EN 12341:2014-08 Ambient air - Standard gravimetric measurement method for the determination of the PM or PM mass concentration of suspended particulate matter
ISO 16000-7:2007 Indoor air — Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations
BS EN 14907:2005 Ambient air quality. Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
BS EN 14799:2007 Air filters for general air cleaning. Terminology
ISO 15883-1:2006 Washer-disinfectors Part 1: General requirements, terms and definitions and tests
I.S. EN 14799:2007 AIR FILTERS FOR GENERAL AIR CLEANING - TERMINOLOGY
UNE-EN 779:2013 Particulate air filters for general ventilation - Determination of the filtration performance
I.S. EN ISO 15883-1:2009 WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006)
UNI EN 12599 : 2012 VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS
UNI EN 14799 : 2008 AIR FILTERS FOR GENERAL AIR CLEANING - TERMINOLOGY
UNI EN ISO 15883-1 : 2014 WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS
UNI EN 12341 : 2014 AMBIENT AIR - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM10 OR PM2,5 MASS CONCENTRATION OF SUSPENDED PARTICULATE MATTER
UNI EN 779 : 2012 PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE
BS ISO 16571:2014 Systems for evacuation of plume generated by medical devices
DIN ISO 11057:2012-05 Air quality - Test method for filtration characterization of cleanable filter media (ISO 11057:2011)
09/30182882 DC : 0 BS ISO 29463-5 - HIGH-EFFICIENCY FILTERS AND FILTER MEDIA FOR REMOVING PARTICLES FROM AIR - PART 5: TEST METHOD FOR DETERMINING THE EFFICIENCY OF FILTER ELEMENTS
12/30252545 DC : 0 BS ISO 15883-1:2006/AMD - WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS
07/30164305 DC : 0 BS ISO 12500-3 - FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 3: PARTICULATES
UNI EN 15549 : 2008 AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF BENZO[A]PYRENE IN AMBIENT AIR
AAMI ISO 13408-1 : 2008 : INC : AMD 1 : 2013 : R201100 ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS
DIN EN 16442:2015-05 CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES
AAMI ISO 13408-1:2008 ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS
ISO 12500-3:2009 Filters for compressed air Test methods Part 3: Particulates
UNE-EN 16442:2015 Controlled environment storage cabinet for processed thermolabile endoscopes
UNE-EN 12312-6:2017 Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment
ISO 29463-5:2011 High-efficiency filters and filter media for removing particles in air Part 5: Test method for filter elements
UNE-EN ISO 15883-1:2009 Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006)
UNE-EN 1822-5:2010 High efficiency air filters (EPA, HEPA and ULPA) - Part 5: Determining the efficiency of filter elements
EN 1822-2 : 2019 HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 2: AEROSOL PRODUCTION, MEASURING EQUIPMENT, PARTICLE COUNTING STATISTICS
DIN EN 12599:2013-01 VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS
BS EN 779:2012 Particulate air filters for general ventilation. Determination of the filtration performance
ISO 14644-4:2001 Cleanrooms and associated controlled environments — Part 4: Design, construction and start-up
07/30113225 DC : 0 BS ISO 21220 - PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE
09/30200844 DC : 0 BS EN 779 - PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE
BS ISO 19859:2016 Gas turbine applications. Requirements for power generation
BS EN 12469:2000 Biotechnology. Performance criteria for microbiological safety cabinets
BS EN ISO 15883-1 : 2009 WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006)
EN 779:2012 Particulate air filters for general ventilation - Determination of the filtration performance
EN ISO 13408-1:2015 Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2008, including Amd 1:2013)
EN ISO 16000-7:2007 Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations (ISO 16000-7:2007)
EN 14799:2007 Air filters for general air cleaning - Terminology
EN ISO 14644-4:2001 Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up (ISO 14644-4:2001)
EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
EN 1834-3:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres
EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
EN 13824:2004 Sterilization of medical devices - Aseptic processing of liquid medical devices - Requirements
EN 16442:2015 Controlled environment storage cabinet for processed thermolabile endoscopes
I.S. EN ISO 13408-1:2015 ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 13408-1:2008, INCLUDING AMD 1:2013)
BS EN 15549:2008 Air quality. Standard method for the measurement of the concentration of benzo(a)pyrene in ambient air
I.S. EN 16913:2017 AMBIENT AIR - STANDARD METHOD FOR MEASUREMENT OF NO[3][-], SO[4][2-], CL[-], NH[4][+], NA[+], K[+], MG[2+], CA[2+] IN PM2,5 AS DEPOSITED ON FILTERS
08/30176855 DC : DRAFT APR 2008 BS EN 1822-5 - HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 5: DETERMINING THE EFFICIENCY OF FILTER ELEMENTS
PD CEN/TS 16645:2014 Ambient air. Method for the measurement of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, dibenz[a,h]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene
UNI CEN/TS 16645 : 2014 AMBIENT AIR - METHOD FOR THE MEASUREMENT OF BENZ[A]ANTHRACENE, BENZO[B]FLUORANTHENE, BENZO[J]FLUORANTHENE, BENZO[K]FLUORANTHENE, DIBENZ[A,H]ANTHRACENE, INDENO[1,2,3-CD]PYRENE AND BENZO[GHI]PERYLENE
EN 16913:2017 Ambient air - Standard method for measurement of NO3¯, SO4²¯, Cl¯, NH4+, Na+, K+, Mg²+, Ca²+ in PM2,5 as deposited on filters
DIN EN 16913:2015-10 (Draft) AMBIENT AIR - STANDARD METHOD FOR MEASUREMENT OF NO[3][-], SO[4][2-], CL[-], NH[4][+], NA[+], K[+], MG[2+], CA[2+] IN PM2,5 AS DEPOSITED ON FILTERS
SAE AIR 4766/1 : 2011 AIR QUALITY FOR COMMERCIAL AIRCRAFT CABIN - PARTICULATE CONTAMINANTS
DIN EN ISO 15883-1:2014-10 WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006 + AMD 1:2014)
14/30244780 DC : 0 BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
CEN/TR 16269:2011 Ambient air - Guide for the measurement of anions and cations in PM2,5
DIN EN 799 E : 2003 BAR CODING - SYMBOLOGY SPECIFICATIONS "CODE 128"
DIN EN 13824:2005-02 STERILIZATION OF MEDICAL DEVICES - ASEPTIC PROCESSING OF LIQUID MEDICAL DEVICES - REQUIREMENTS
DIN EN 779:2012-10 PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE
CEN/TS 16645:2014 Ambient air - Method for the measurement of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, dibenz[a,h]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene

EN 1822-5:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 5: Determining the efficiency of filter elements
EN 1822-2:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics
EN ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003)
ISO 14644-3:2005 Cleanrooms and associated controlled environments Part 3: Test methods
ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements
EN 1822-3:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 3: Testing flat sheet filter media
EN 1822-4:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 4: Determining leakage of filter elements (scan method)
EN 14799:2007 Air filters for general air cleaning - Terminology
EN ISO 14644-3:2005 Cleanrooms and associated controlled environments - Part 3: Test methods (ISO 14644-3:2005)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.