Skip to content
Please enter a keyword to search

  • BS ISO 19859:2016

    Current The latest, up-to-date edition.

    Gas turbine applications. Requirements for power generation

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  30-06-2016

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Comparative performance assessment at standard
       reference conditions
    5 Performance at site conditions
    6 Site conditions and utilities
    7 Discharges and emissions to the environment
    8 Contract fuels
    9 Fuel systems and treatment
    10 Regulations, codes and standards
    11 Operating requirements
    12 Quality
    13 Reliability, availability and maintainability
    14 Safety requirements
    15 Measurement, language, identification and standardization
    16 Corrosion prevention, painting and finishing
    17 Packing and transportation
    18 Gas turbine core
    19 Gearboxes and couplings
    20 Air inlet system
    21 Exhaust system
    22 Civil design and foundation requirements
    23 Generator design interface requirements
    24 Heat recovery steam generation design interface
    25 Combined cycle applications
    26 Control and instrumentation requirements
    27 Electrical system requirements
    28 Maintenance requirements
    29 Enclosures
    30 Auxiliary equipment
    31 Condition monitoring
    32 Installation and commissioning
    33 Verification testing
    34 Design life
    35 Technical information and documents
    Annex A (normative) - Use of data sheet requirements
            and options
    Bibliography

    Abstract - (Show below) - (Hide below)

    Defines the minimum technical and documentation requirements for the evaluation and procurement of gas turbine systems for electrical power generation.

    General Product Information - (Show below) - (Hide below)

    Committee MCE/16
    Development Note Supersedes 14/30244780 DC. (06/2016)
    Document Type Standard
    Publisher British Standards Institution
    Status Current
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 10816-4:2009 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 4: Gas turbine sets with fluid-film bearings
    ISO 6743-5:2006 Lubricants, industrial oils and related products (class L) Classification Part 5: Family T (Turbines)
    ISO 3016:1994 Petroleum products Determination of pour point
    ISO 9223:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation
    EN 50160 : 2010 AMD 1 2015 VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
    IEC 60038:2009 IEC standard voltages
    ISO 14691:2008 Petroleum, petrochemical and natural gas industries — Flexible couplings for mechanical power transmission — General-purpose applications
    ISO 3977-4:2002 Gas turbines — Procurement — Part 4: Fuels and environment
    ISO 15649:2001 Petroleum and natural gas industries — Piping
    ISO 19840:2012 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
    IEC 61936-1:2010+AMD1:2014 CSV Power installations exceeding 1 kV a.c. - Part 1: Common rules
    IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
    EN 12464-1:2011 Light and lighting - Lighting of work places - Part 1: Indoor work places
    AGMA 6011 : I SPECIFICATION FOR HIGH SPEED HELICAL GEAR UNITS
    ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
    ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
    ISO 14122-1:2016 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
    ISO 6976:2016 Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition
    NEMA MG 1 : 2016 MOTORS AND GENERATORS
    ISO 18752:2014 Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification
    ASME B31.1 : 2016 POWER PIPING
    ISO 7919-4:2009 Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 4: Gas turbine sets with fluid-film bearings
    ISO 8504-1:2000 Preparation of steel substrates before application of paints and related products Surface preparation methods Part 1: General principles
    IEEE 762-2006 IEEE Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity
    ASHRAE 52.2 : 2017 METHOD OF TESTING GENERAL VENTILATION AIR-CLEANING DEVICES FOR REMOVAL EFFICIENCY BY PARTICLE SIZE
    IEC 60502:1994 Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV
    ISO 3675:1998 Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method
    IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
    IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
    ISO 3977-1:1997 Gas turbines — Procurement — Part 1: General introduction and definitions
    ISO 10816-2:2009 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
    ISO 9614-1:1993 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points
    IEC 60304:1982 Standard colours for insulation for low-frequency cables and wires
    EN 1822-5:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 5: Determining the efficiency of filter elements
    ISO 11086:1996 Gas turbines — Vocabulary
    ISO 7919-2:2009 Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
    ISO 12151-2:2003 Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
    ISO 21940-31:2013 Mechanical vibration — Rotor balancing — Part 31: Susceptibility and sensitivity of machines to unbalance
    EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines
    IEC 61643-12:2008 Low-voltage surge protective devices - Part 12: Surge protective devices connected to low-voltage power distribution systems - Selection and application principles
    NAS1638:2011 CLEANLINESS REQUIREMENTS OF PARTS USED IN HYDRAULIC SYSTEMS
    ISO/TS 81346-3:2012 Industrial systems, installations and equipment and industrial products Structuring principles and reference designations Part 3: Application rules for a reference designation system
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    ISO 7919-1:1996 Mechanical vibration of non-reciprocating machines Measurements on rotating shafts and evaluation criteria Part 1: General guidelines
    IEC 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
    ASME B31.3:2016 PROCESS PIPING
    ISO 3977-9:1999 Gas turbines Procurement Part 9: Reliability, availability, maintainability and safety
    ISO 6247:1998 Petroleum products — Determination of foaming characteristics of lubricating oils
    IEC 60079-10-1:2015 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
    ISO 1940-1:2003 Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances
    ISO 14123-1:2015 Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers
    ISO 9613-2:1996 Acoustics — Attenuation of sound during propagation outdoors — Part 2: General method of calculation
    ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
    EN 13480-1:2017 Metallic industrial piping - Part 1: General
    ISO 9614-2:1996 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning
    ISO 2533:1975 Standard Atmosphere
    ISO 9120:1997 Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method
    ISO 17776:2016 Petroleum and natural gas industries Offshore production installations Major accident hazard management during the design of new installations
    ISO 8501-3:2006 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections
    ISO 4263-1:2003 Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 1: Procedure for mineral oils
    IEC TR 61000-5-2:1997 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling
    IEC 60034-3:2007 Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines
    ISO 10005:2005 Quality management systems Guidelines for quality plans
    ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
    IEC 62040-1:2017 EXV UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: SAFETY REQUIREMENTS
    ISO 14122-4:2016 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
    ISO 11124-1:1993 Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 1: General introduction and classification
    IEC 60364-1:2005 Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
    EN 779:2012 Particulate air filters for general ventilation - Determination of the filtration performance
    ISO 11126-1:1993 Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 1: General introduction and classification
    IEC 62305-1:2010 Protection against lightning - Part 1: General principles
    IEEE C95.3-2002 IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz-300 GHz
    IEC 61000-6-3:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
    IEC 60079-11:2011 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
    IEC 62040-2:2016 Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
    API 670 : 2014 MACHINERY PROTECTION SYSTEMS
    EN 13284-1:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
    ISO 10380:2012 Pipework — Corrugated metal hoses and hose assemblies
    IEC 61918:2013 Industrial communication networks - Installation of communication networks in industrial premises
    ISO 12944-2:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments
    ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
    ISO 12944-1:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction
    ISO 11042-1:1996 Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation
    ISO 21789:2009 Gas turbine applications — Safety
    ISO 2314:2009 Gas turbines — Acceptance tests
    ISO 11042-2:1996 Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
    ASME PTC46 : 2015 PERFORMANCE TEST CODES - OVERALL PLANT PERFORMANCE
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    ISO 6162-1:2012 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
    ISO 3977-8:2002 Gas turbines — Procurement — Part 8: Inspection, testing, installation and commissioning
    ISO 13691:2001 Petroleum and natural gas industries — High-speed special-purpose gear units
    ISO 10816-1:1995 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines
    NFPA 85 : 2015 BOILER AND COMBUSTION SYSTEMS HAZARDS CODE
    ISO 16276-2:2007 Corrosion protection of steel structures by protective paint systems Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Part 2: Cross-cut testing and X-cut testing
    SAE J 518/1 : 2013 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61)
    ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements
    NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
    IEC 61786:1998 Measurement of low-frequency magnetic and electric fields with regard to exposure of human beings - Special requirements for instruments and guidance for measurements
    EN 50272-2:2001 Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries
    ISO 14726:2008 Ships and marine technology — Identification colours for the content of piping systems
    ISO 128-1:2003 Technical drawings General principles of presentation Part 1: Introduction and index
    ISO 21940-13:2012 Mechanical vibration — Rotor balancing — Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors
    ISO 12944-4:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation
    ISO 80000-1:2009 Quantities and units — Part 1: General
    IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
    ISO 6336-1:2006 Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors
    ISO 8501-2:1994 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
    IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
    ISO 9001:2015 Quality management systems — Requirements
    IEC 61000-6-4:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
    ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity
    ISO 12151-1:2010 Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
    ISO 19860:2005 Gas turbines — Data acquisition and trend monitoring system requirements for gas turbine installations
    SAE AS 4059F : 2013 AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS
    ISO 10817-1:1998 Rotating shaft vibration measuring systems Part 1: Relative and absolute sensing of radial vibration
    ISO 4261:2013 Petroleum products — Fuels (class F) — Specifications of gas turbine fuels for industrial and marine applications
    IEC 62305-4:2010 Protection against lightning - Part 4: Electrical and electronic systems within structures
    EN 1997-1:2004/A1:2013 EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
    EN 1822-1:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking
    ISO 10441:2007 Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications
    ISO 22266-1:2009 Mechanical vibration Torsional vibration of rotating machinery Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW
    ISO 21940-32:2012 Mechanical vibration — Rotor balancing — Part 32: Shaft and fitment key convention
    ISO 13938-1:1999 Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension
    IEC 82079-1:2012 Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements
    ISO/IEC 90003:2014 Software engineering Guidelines for the application of ISO 9001:2008 to computer software
    ISO 2909:2002 Petroleum products Calculation of viscosity index from kinematic viscosity
    IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
    ISO 3977-3:2004 Gas turbines — Procurement — Part 3: Design requirements
    ISO 7919-3:2009 Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines
    EN 50522:2010 Earthing of power installations exceeding 1 kV a.c.
    ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
    ISO 2409:2013 Paints and varnishes Cross-cut test
    ISO 14713-2:2009 Zinc coatings Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 2: Hot dip galvanizing
    ISO 10396:2007 Stationary source emissions — Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
    IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
    IEC 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
    IEEE C50.13 : 2014 CYLINDRICAL-ROTOR 50 HZ AND 60 HZ, SYNCHRONOUS GENERATORS RATED 10 MVA AND ABOVE
    ISO 3448:1992 Industrial liquid lubricants — ISO viscosity classification
    ISO 11204:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
    EN 1838:2013 Lighting applications - Emergency lighting
    ISO 10494:1993 Gas turbines and gas turbine sets Measurement of emitted airborne noise Engineering/survey method
    ASME PTC22 : 2014 GAS TURBINES
    ISO 4407:2002 Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope
    IEC TR 61000-5-1:1996 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 1: General considerations - Basic EMC publication
    1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
    NFPA 497 : 2017 CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective