EN 1964-1:1999/AC:1999
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0.5 LITRE UP TO AND INCLUDING 150 LITRES - PART 1: CYLINDERS MADE OF SEAMLESS STEEL WITH AN RM VALUE OF LESS THAN 1100 MPA
Superseded date
01-04-2010
Superseded by
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions and symbols
4 Materials
5 Design
6 Construction and workmanship
7 Tests
8 Conformity evaluation
9 Stamp marking
Annex A (normative) Prototype testing and production testing
Annex B (normative) Description, evaluation and manufacturing
defects and conditions for rejection of seamless steel
gas cylinders at time of visual inspection
Annex C (normative) Ultrasonic examination
Annex D (informative) Examples of type approval and production
testing
Annex E (informative) Bibliography
Defines minimum requirements for the design, material, construction and workmanship, manufacturing processes and tests at manufacture of refillable transportable seamless steel gas cylinders of water capacities between 0,5l and 150l for compressed, dissolved and liquefied gases. Applies to steel cylinders with an Rm value below 1100 MPa.
| Committee |
TC 23
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NS EN 1964-1 : 1999 | Identical |
| NEN EN 1964-1 : 1999 | Identical |
| BS EN 1964-1:2000 | Identical |
| ISO 9809-1:2010 | Corresponds |
| NF EN 1964-1 : 1999 | Identical |
| I.S. EN 1964-1:1999 | Identical |
| PN EN 1964-1 : 2002 | Identical |
| UNI EN 1964-1 : 2001 | Identical |
| NBN EN 1800 : 2007 | Corresponds |
| SN EN 1964-1 : 1999 | Identical |
| DIN EN 1964-1:1999-03 | Identical |
| NBN EN 1964-1 : 1999 | Identical |
| UNE-EN 1964-1:1999 | Identical |
| PD CEN/TR 15444:2006 | Transportable gas cylinders. Gas cylinders conforming to the TPED to be used for PED applications. Applicability and justifications |
| I.S. EN 13322-1:2003 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL |
| BS EN 12863:2002 | Transportable gas cylinders. Periodic inspection and maintenance of dissolved acetylene cylinders |
| BS EN 12416-1:2001 | Fixed firefighting systems. Powder systems Requirements and test methods for components |
| DIN EN 12863:2002-09 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE OF DISSOLVED ACETYLENE CYLINDERS |
| EN 12416-1:2001+A2:2007 | Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components |
| DIN EN 14529:2006-01 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
| EN 12312-18:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units |
| EN 12205:2001 | Transportable gas cylinders - Non refillable metallic gas cylinders |
| I.S. CEN TR 15444:2006 | TRANSPORTABLE GAS CYLINDERS - GAS CYLINDERS CONFORMING TO THE TPED TO BE USED FOR PED APPLICATIONS - APPLICABILITY AND JUSTIFICATIONS |
| I.S. EN 1800:2006 | TRANSPORTABLE GAS CYLINDERS - ACETYLENE CYLINDERS - BASIC REQUIREMENTS, DEFINITIONS AND TYPE TESTING |
| BS ISO 21927-10:2011 | Smoke and heat control systems Specification for power output devices |
| ISO 21927-10:2011 | Smoke and heat control systems — Part 10: Specification for power output devices |
| EN 1146:2005 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking |
| DIN EN 1146:2005-12 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking |
| DIN EN 1800:2007-02 | TRANSPORTABLE GAS CYLINDERS - ACETYLENE CYLINDERS - BASIC REQUIREMENTS, DEFINITIONS AND TYPE TESTING |
| BS EN 1968:2002 | Transportable gas cylinders. Periodic inspection and testing of seamless steel gas cylinders |
| BS EN 12312-18 : 2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 18: NITROGEN OR OXYGEN UNITS |
| I.S. EN 12416-1:2001 | FIXED FIREFIGHTING SYSTEMS - POWDER SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| I.S. EN 12312-18:2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 18: NITROGEN OR OXYGEN UNITS |
| DIN EN 1800:1999-02 | TRANSPORTABLE GAS CYLINDERS - ACETYLENE CYLINDERS - BASIC REQUIREMENTS, DEFINITIONS AND TYPE TESTING |
| I.S. EN 12245:2009 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
| I.S. EN 1146:2005 | RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS INCORPORATING A HOOD FOR ESCAPE - REQUIREMENTS, TESTING, MARKING |
| NF EN 12245 : 2009 + A1 2012 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
| I.S. EN 12863:2002 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE OF DISSOLVED ACETYLENE CYLINDERS |
| ONORM EN 13322-1 : 2006 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL |
| DIN EN 12863:2006-02 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE OF DISSOLVED ACETYLENE CYLINDERS |
| DIN EN 1968:2005-12 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF SEAMLESS STEEL GAS CYLINDERS |
| DIN EN 12245:2012-03 | Transportable gas cylinders - Fully wrapped composite cylinders (includes Amendment A1:2011) |
| BS EN 12257:2002 | Transportable gas cylinders. Seamless, hoop-wrapped composite cylinders |
| BS EN 13322-1 : 2003 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL |
| UNI EN 12245 : 2011 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
| DIN EN 12312-18:2009-08 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 18: NITROGEN OR OXYGEN UNITS |
| DIN EN 12416-1:2007-09 | FIXED FIREFIGHTING SYSTEMS - POWDER SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| DIN EN 12101-10:2006-01 | Smoke and heat control systems - Part 10: Power supplies |
| BS EN 12101-10:2005 | Smoke and heat control systems Power supplies |
| BS EN 14529:2005 | Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
| BS EN 1146:2005 | Respiratory protective devices. Selfcontained open-circuit compressed air breathing apparatus incorporating a hood for escape. Requirements, testing, marking |
| BS EN 1800:2006 | Transportable gas cylinders. Acetylene cylinders. Basic requirements, definitions and type testing |
| UNE-EN 12245:2009 | Transportable gas cylinders - Fully wrapped composite cylinders |
| EN 14529:2005 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
| EN 12245:2009+A1:2011 | Transportable gas cylinders - Fully wrapped composite cylinders |
| EN 1800:2006 | Transportable gas cylinders - Acetylene cylinders - Basic requirements, definitions and type testing |
| DIN EN 13322-1:2006-05 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL |
| BS EN 12205:2001 | Transportable gas cylinders. Non-refillable metallic gas cylinders |
| EN 12257:2002 | Transportable gas cylinders - Seamless, hoop-wrapped composite cylinders |
| CEN/TR 15444:2006 | Transportable gas cylinders - Gas cylinders conforming to the TPED to be used for PED applications - Applicability and justifications |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| EN 629-2 : 1996 | TRANSPORTABLE GAS CYLINDERS - 25E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS - GAUGE INSPECTION |
| EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| EN 1089-1 : 1996 | TRANSPORTABLE GAS CYLINDERS - GAS CYLINDER IDENTIFICATION (EXCLUDING LPG) - STAMPMARKING |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| EURONORM 6 : 1955 | FOLDING TEST FOR STEEL |
| EN 10003-1 : 1994 | METALLIC MATERIALS - BRINELL HARDNESS TEST - TEST METHOD |
| EN 629-1 : 1996 | TRANSPORTABLE GAS CYLINDERS - 25E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.