EN 2032-1:2001
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Aerospace series - Metallic materials - Part 1: Conventional designation
Superseded date
01-07-2014
Superseded by
Published date
05-12-2001
Publisher
Sorry this product is not available in your region.
0 Introduction
1 Scope
2 Normative references
3 Definitions
4 Principle
4.1 General
4.2 Base metal
4.3 Method of production or use
4.4 Basic chemical composition (base metal excluded)
4.5 Mass content of an alloying element
5 Structural materials
5.1 Unalloyed metals
5.2 Nickel base or cobalt base alloys
5.3 Aluminium base materials
5.4 Steels
5.5 Commercially pure titanium and titanium base alloys
5.6 Magnesium base alloys
5.7 Other metal base alloys
6 Joining materials
6.1 Filler metals for welding
6.2 Filler metals for brazing
7 Allocation, registration and updating of conventional
designations
7.1 Allocation
7.2 Registration
7.3 Updating
This standard specifies the rules for establishing the conventional designation of unalloyed, commercially pure and alloyed metallic materials used for aerospace applications.NOTEThe relationship between former AECMA designations and the new designations according to this standard is given in TR 3900.
| Committee |
ASD-STAN
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NS EN 2032-1 : 1ED 2002 | Identical |
| UNI EN 2032-1 : 2002 | Identical |
| DIN EN 2032-1:2003-06 | Identical |
| SN EN 2032-1 : 2001 | Identical |
| NEN EN 2032-1 : 2002 | Identical |
| NBN EN 2032-1 : 2002 | Identical |
| PN EN 2032-1 : 2003 | Identical |
| BS EN 2032-1:2002 | Identical |
| NF EN 2032-1 : 2002 | Identical |
| NBN EN 2516 : 1997 | Identical |
| I.S. EN 2032-1:2002 | Identical |
| UNE-EN 2032-1:2001 | Identical |
| BS EN 4700-001:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip |
| 00/705877 DC : 0 | PREN 4400-3 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 3: BAR AND SECTION |
| 13/30290101 DC : 0 | BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| 06/30146290 DC : 0 | EN 4632-2 - AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 2: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS |
| UNI EN 4700-006 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| 01/710777 DC : 0 | PREN 3875 - AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR BRAZING - TECHNICAL SPECIFICATION |
| 05/30129551 DC : 0 | PREN 4700-5 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK |
| BS EN 4700-005:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock |
| BS EN 4500-003:2012 | Aerospace series. Metallic materials. Rules for drafting and presentation of material standards Specific rules for heat resisting alloys |
| XP PREN 3359 : 1996 XP | AEROSPACE SERIES - STEEL FE-PM1503 (X3CRNIMOAI13.8.2) - VACUUM INDUCTION MELTED AND REMELTED - AS FORGED - FORGING STOCK - A OR D LESS THAN OR EQUAL TO 300MM |
| PREN 2299 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96HT - SOLUTION TREATED AND PRECIPITATION TREATED - TUBE |
| PREN 2770 : 200P1 | AEROSPACE SERIES - STEEL FE-PL53S - HARDENED AND TEMPERED - 1050 <= R[M]<= 1220 MPA - SHEET AND PLATE - 0,5 <= A <= 12 MM |
| UNI EN 4800-006 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| PREN 4400-6 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOYS - TECHNICAL SPECIFICATION - PART 6: ALUMINIUM ALLOY FORGING STOCK |
| PREN 2769 : 200P2 | AEROSPACE SERIES - STEEL FE-PL53S - HARDENED AND TEMPERED -1030 <= R[M] <= 1180 MPA - FORGINGS - D[E] <= 70 MM |
| PREN 3337 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7010) - SOLUTION TREATED AND ARTIFICIALLY AGED (T74511) - EXTRUDED BARS AND SECTIONS - (A OR D) <= 130 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 3353 : 200P1 | AEROSPACE SERIES - TITANIUM ALLOY TI-P63 - SOLUTION TREATED AND AGED - R[M] >= 1100 MPA - BAR AND WIRE FOR FASTENERS MACHINED - D[E] <= 25 MM |
| PREN 3481 : 200P1 | AEROSPACE SERIES - STEEL FE-PA13 - ANNEALED - REFERENCE HEAT TREATMENT: SOFTENED - HOLLOW BARS - 5 <= A <= 12 MM |
| PREN 3489 : 200P1 | AEROSPACE SERIES - STEEL FE-PA13 - SOFTENED - 500 <= R[M] <= 750 MPA - TUBES FOR STRUCTURES - 0,5 <= A <= 5 MM |
| PREN 3513 : 200P1 | AEROSPACE SERIES - STEEL FE-PL711 - HARDENED AND TEMPERED - 900 <= R[M] <= 1100 MPA - BAR AND WIRE - D[E] <= 45 MM |
| PREN 2296 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96 - MELTED IN AIR - SOLUTION TREATED AND PRECIPITATION TREATED - R[M] >= 1080 MPA - FORGINGS |
| PREN 3471 : 200P1 | AEROSPACE SERIES - STEEL FE-PA18 - QUENCHED AND COLD DRAWN - STRIP FOR SPRING A <= 4.0 MM |
| PREN 3482 : 200P1 | AEROSPACE SERIES - STEEL FE-PA13 - ANNEALED REFERENCE HEAT TREATMENT: SOFTENED - FORGING STOCK - D[E] <= 100 MM |
| PREN 3514 : 200P1 | AEROSPACE SERIES - STEEL FE-PL711 - HARDENED AND TEMPERED - 1100 <= R[M] <= 1300 MPA - BAR AND WIRE FOR BOLTS - D[E] <= 25 MM |
| PREN 3551 : 200P2 | AEROSPACE SERIES - ALUMINIUM ALLOY (7150) - SOLUTION TREATED, STRETCHED AND ARTIFICIALLY AGED (T6511) - EXTRUDED BARS AND SECTIONS - (A OR D) <= 90 MM |
| I.S. EN 4800-004:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| PREN 2669 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96 - MELTED UNDER VACUUM - NOT HEAT TREATED - REFERENCE HEAT TREATMENT: SOLUTION TREATED AND PRECIPITATION TREATED - FORGING STOCK |
| PREN 4700-004 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 4: WIRE |
| PREN 4700-005 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| PREN 4400-4 : DRAFT 2003 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOYS - TECHNICAL SPECIFICATION - PART 4: ALUMINIUM AND ALUMINIUM ALLOY TUBE |
| PREN 4800-006 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| UNI EN 4500-003 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING ALLOYS |
| PREN 4800-005 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK |
| PREN 3554 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7010) - SOLUTION TREATED, COLD COMPRESSED AND ARTIFICIALLY AGED (T7652) - HAND FORGINGS A <= 200 MM |
| PREN 4700-006 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| PREN 4800-003 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 3: TUBE |
| PREN 4500-004 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS |
| PREN 3879 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR WELDING - TECHNICAL SPECIFICATION |
| S.R. CR 12172:1995 | NUMERICAL DESIGNATION SYSTEMS OF METALLIC MATERIALS - REVIEW OF EXISTING SYSTEMS AND RECOMMENDATION FOR NEW SYSTEMS |
| I.S. EN 4700-007:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| NF EN 4700-007 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| I.S. EN 2516:1997 | AEROSPACE SERIES - PASSIVATION OF CORROSION RESISTING STEELS AND DECONTAMINATION OF NICKEL BASE ALLOYS |
| EN 2516:1997 | Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel base alloys |
| DIN EN 1780-1:2003-01 | ALUMINIUM AND ALUMINIUM ALLOYS - DESIGNATION OF ALLOYED ALUMINIUM INGOTS FOR REMELTING, MASTER ALLOYS AND CASTINGS - PART 1: NUMERICAL DESIGNATION SYSTEM |
| 01/716045 DC : 0 | PREN 4800-7 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 7: RE-MELTING STOCK |
| 01/710778 DC : 0 | PREN 3879 - AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR WELDING - TECHNICAL SPECIFICATION |
| BS EN 4700-006:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings |
| 10/30228108 DC : 0 | BS EN 4400-9 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOYS - TECHNICAL SPECIFICATION - PART 9: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| UNI EN 4800-004 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| UNI EN 4500-001 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| NF EN 4700-005 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| UNI EN 4800-005 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| PREN 2298 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96HT - SOLUTION TREATED AND PRECIPITATION TREATED - R[M] >= 1080 MPA - SHEET AND STRIP - 0,25 < A <= 3 MM |
| I.S. EN 4800-006:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| I.S. EN 4800-005:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| PREN 3123 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-C27 - SOLUTION TREATED AND ARTIFICIALLY AGED (T6) - STRUCTURAL PRECISION CASTINGS |
| 01/716043 DC : 0 | PREN 4800-5 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK |
| NF EN 4800-003 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| PREN 3367 : 200P1 | AEROSPACE SERIES - STEEL FE-PL10 - HARDENED, TEMPERED AND COLD DRAWN - 1260 <= R[M] <= 2790 MPA - WIRE FOR SPRING - 0,20 <= D <= 10,50 MM |
| PREN 3348 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (2024) - SOLUTION TREATED AND ARTIFICIALLY AGED (T62) - PLATE - 6 <= A <= 50 MM |
| PREN 2541 : 200P2 | AEROSPACE SERIES - STEEL FE-PA 18 QUENCHED AND COLD DRAWN - WIRE FOR SPRING - D <= 4,0 MM |
| PREN 2919 : 200P2 | AEROSPACE SERIES - STEEL FE-PL72 - CARBURIZED, HARDENED AND TEMPERED - BAR - D[E] <= 160 MM |
| PREN 3486 : 200P1 | AEROSPACE SERIES - STEEL FE-PM67 - SOLUTION ANNEALED AND PRECIPITATION HARDENED - 1400 <= R[M] <= 1550 MPA - FORGINGS - D[E] <= 100 MM |
| PREN 3366 : 200P1 | AEROSPACE SERIES - STEEL FE-CM68 - AS MANUFACTURED - REFERENCE HEAT TREATMENT: SOLUTION TREATED - REMELTING STOCK |
| PREN 3340 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7050) - SOLUTION TREATED AND ARTIFICIALLY AGED (T76) - DIE FORGINGS - A <= 200 MM |
| PREN 3329 : 200P1 | AEROSPACE SERIES - STEEL FE-PL45 - ANNEALED - SHEET AND STRIP - 0,3 <= A <= 2 MM FOR PREVAILING TORQUE NUTS |
| PREN 4800-001 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 1: PLATE, SHEET AND STRIP |
| PREN 4632-002 : 200P1 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS |
| I.S. EN 4800-002:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| NF EN 4800-006 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| UNI EN 4700-007 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| I.S. EN 4700-006:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| NF EN 4700-002 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| NF EN 4632-002 : 2008 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS |
| EN 3875:2017 | Aerospace series - Metallic materials, Filler metal for brazing - Technical specification |
| SBAC TS 96 : 5 | ADS RECOMMENDATIONS FOR SIMILAR METALLIC MATERIAL SPECIFICATIONS & STANDARDS |
| SBAC TS 95 : 8 | TECHNICAL SPECIFICATION NO. TS95 - SAE ITC GUIDANCE FOR SELECTION OF METALLIC MATERIAL SPECIFICATIONS & STANDARDS USED FOR NEW DESIGNS |
| BS EN 4700-004:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire |
| 95/705079 DC : 0 | TR 2410 - AEROSPACE SERIES - RELATIONSHIP BETWEEN DIMENSIONAL STANDARDS AND METALLIC MATERIAL STANDARDS |
| BS EN 3875:2017 | Aerospace series. Metallic materials, Filler metal for brazing. Technical specification |
| NF EN 4800-005 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| BS EN 4500-001:2012 | Aerospace series. Metallic materials. Rules for drafting and presentation of material standards General rules |
| UNI EN 4700-005 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| 95/712874 DC : 0 | PREN 4500-1 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 1: GENERAL RULES |
| 03/306584 DC : 0 | EN 4400-5 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOY PRODUCTS - TECHNICAL SPECIFICATION - PART 5: ALUMINIUM AND ALUMINIUM ALLOY RIVET WIRE |
| UNI EN 4700-004 : 2011 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
| BS EN 4800-006:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Pre-production and production forgings |
| UNI EN 4500-004 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS |
| BS EN 4800-005:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Forging stock |
| 02/708860 DC : 0 | PREN 4800-1 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 1: PLATE, SHEET AND STRIP |
| XP PREN 3364 : 1996 XP | AEROSPACE SERIES - STEEL FE-PM64 - SOFTENED - REFERENCE HEAT TREATMENT: SOLUTION ANNEALED AND PRECIPITATION HARDENED - FORGING STOCK - DE =< 300 MM |
| BS EN 4800-004:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Wire |
| UNI EN 4800-008 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| NF EN 4700-006 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| I.S. EN 4500-004:2012 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS |
| PREN 2920 : 200P2 | AEROSPACE SERIES - STEEL FE-PL72 - CARBURIZED, HARDENED AND TEMPERED - FORGINGS - D[E] <= 160 MM |
| PREN 3875 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR BRAZING - TECHNICAL SPECIFICATION |
| BS EN 4500-004:2012 | Aerospace series. Metallic materials. Rules for drafting and presentation of material standards Specific rules for titanium and titanium alloys |
| PREN 3363 : 200P1 | AEROSPACE SERIES - STEEL FE-CM68 - SOLUTION TREATED - R[M] >= 485 MPA - SAND OR INVESTMENT CASTING |
| PREN 2295 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96 - MELTED IN AIR - NON TREATED - FORGING STOCK |
| PREN 2297 : 200P1 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96HT - SOLUTION TREATED AND PRECIPITATION TREATED - R[M] >= 1080 MPA - BAR AND SECTIONS FOR WELDED RINGS |
| XP PREN 4500-6 : 1997 XP | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 6: SPECIFIC RULES FOR FILLER METALS FOR BRAZING |
| I.S. EN 4500-003:2012 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING ALLOYS |
| PREN 3550 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (2024) - SOLUTION TREATED, STRETCHED AND ARTIFICIALLY AGED (T8511) - EXTRUDED BARS AND SECTIONS - (A OR D) <= 150 MM |
| PREN 3343 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7010) - SOLUTION TREATED AND ARTIFICIALLY AGED (T76511) - EXTRUDED BARS AND SECTIONS - 1 < (A OR D) <= 130 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 3485 : 200P1 | AEROSPACE SERIES - STEEL FE-CM61 - HOMOGENISED, SOLUTION TREATED, PRECIPITATION HARDENED AND SUB ZERO - R[M] >= 830 MPA - MEDIUM STRENGTH - SAND OR INVESTMENT CASTING |
| PREN 3484 : 200P1 | AEROSPACE SERIES - STEEL FE-CM61 - AS CAST - REFERENCE HEAT TREATMENT: HOMOGENISED, SOLUTION TREATED, PRECIPITATION HARDENED AND SUB ZERO - REMELTING STOCK |
| PREN 3530 : 200P1 | AEROSPACE SERIES - STEEL FE-PA95 - SOFTENED - REFERENCE HEAT TREATMENT: SOLUTION TREATED AND PRECIPITATION TREATED - FORGING STOCK - D[E] <= 200 MM |
| PREN 3492 : 200P1 | AEROSPACE SERIES - STEEL FE-PM44 - HARDENED AND TEMPERED - BAR FOR MACHINING - D[E] <= 150 MM |
| PREN 3349 : 200P2 | AEROSPACE SERIES - MAGNESIUM ALLOY MG-C92 - SOLUTION TREATED AND ARTIFICIALLY AGED (T6) - CASTING |
| I.S. EN 4700-001:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| CR 12172:1995 | Numerical designation systems for metallic materials - Review of existing systems and recommendation for new systems |
| UNI EN 4700-003 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| NF EN 4700-003 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| UNI EN 4800-007 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| DIN EN 2516:1997-05 | AEROSPACE SERIES - PASSIVATION OF CORROSION RESISTANT STEELS AND DECONTAMINATION OF NICKEL BASE ALLOYS |
| UNI EN 4800-001 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| NF EN 4800-008 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| NF EN 4800-007 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| BS EN 4800-008:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Pre-production and production castings |
| UNI EN 4800-003 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| 01/716046 DC : 0 | PREN 4800-8 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 8: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| BS EN 4700-003:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube |
| BS EN 4800-001:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Plate, sheet and strip |
| BS EN 4632-002:2008 | Aerospace series. Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materials Homogeneous assemblies aluminium and aluminium alloys |
| 11/30253929 DC : 0 | BS EN 4820 - AEROSPACE SERIES - COPPER AND COPPER ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION |
| BS EN 4800-002:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Bar and section |
| 03/306585 DC : 0 | EN 4400-7 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOY PRODUCTS - TECHNICAL SPECIFICATION - PART 7: ALUMINIUM ALLOY FORGINGS |
| BS EN 4800-003:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Tube |
| PREN 3330 : 200P1 | AEROSPACE SERIES - STEEL FE-PL45 - ANNEALED - BAR AND WIRE - D[E] <= 40 MM FOR PREVAILING TORQUE NUTS |
| 01/716044 DC : 0 | EN 4800-6 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| PREN 3122 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-C27 - SOLUTION TREATED AND ARTIFICIALLY AGED (T6) - HIGH STRENGTH - STRUCTURAL PRECISION CASTINGS |
| NF EN 4700-001 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| PREN 2670 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96 - MELTED UNDER VACUUM - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS |
| NF EN 4700-004 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| PREN 4700-003 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| NF EN 4800-004 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| PREN 3458 : 200P1 | AEROSPACE SERIES - TITANIUM ALLOY TI-P63 - ANNEALED - 900 <= R[M] <= 1160 MPA - BAR AND WIRE FOR FASTENERS MACHINED - D[E] <= 25 MM |
| 05/30129555 DC : 0 | PREN 4700-6 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| PREN 3493 : 200P1 | AEROSPACE SERIES - STEEL FE-PL48 - HARDENED AND TEMPERED - 1050 <= R[M] <= 1250 MPA - FORGINGS - D[E] <= 40 MM |
| PREN 3345 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7150) - SOLUTION TREATED, WATER QUENCHED CONTROLLED STRETCHED AND ARTIFICIALLY AGED (T6511) - EXTRUDED BAR AND SECTION - (A OR D) <= 90 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 4800-008 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 8: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| PREN 4800-002 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 2: BAR AND SECTION |
| NF EN 4800-001 : 2012 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| UNI EN 4700-001 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| I.S. EN 4700-005:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| I.S. EN 3875:2017 | AEROSPACE SERIES - METALLIC MATERIALS, FILLER METAL FOR BRAZING - TECHNICAL SPECIFICATION |
| BS EN 4258:1998 | Metallic materials. General organization of standardization. Links between types of EN standards and their use |
| BS EN 1780-1:2002 | Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings Numerical designation system |
| EN 4800-003:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 003: Tube |
| EN 4800-002:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar and section |
| EN 4800-001:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip |
| EN 4700-005:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock |
| EN 4258:1998 | Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
| EN 4700-003:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube |
| EN 1780-1:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system |
| EN 4632-002:2008 | Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys |
| EN 4500-004:2012 | Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 004: Specific rules for titanium and titanium alloys |
| EN 4500-001:2012 | Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules |
| EN 4500-003:2012 | Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat resisting alloys |
| EN 4700-007:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock |
| EN 4800-004:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 004: Wire |
| EN 4800-008:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 008: Pre-production and production castings |
| EN 4800-007:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 007: Remelting stock |
| EN 4700-004:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
| EN 4800-005:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock |
| EN 4700-001:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip |
| EN 4800-006:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 006: Pre-production and production forgings |
| EN 4700-006:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings |
| 05/30129558 DC : 0 | PREN 4700-7 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 7: REMELTING STOCK |
| 10/30239500 DC : 0 | BS EN 4500-4 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 4: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS |
| I.S. EN 4700-003:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| BS EN 4700-007:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Remelting stock |
| I.S. EN 4800-003:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| NFL 06 380-20 : 2003 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 20: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS |
| XP PREN 4258 : 1996 XP | AEROSPACE SERIES - METALLIC MATERIALS - GENERAL ORGANIZATION OF STANDARDIZATION - LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE |
| BS EN 4800-007:2010 | Aerospace series. Titanium and titanium alloys Remelting stock |
| I.S. EN 4800-007:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| 03/310514 DC : 0 | BS EN 4400-4 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOYS - TECHNICAL SPECIFICATION - PART 4: ALUMINIUM AND ALUMINIUM ALLOY TUBE |
| PREN 2542 : 200P2 | AEROSPACE SERIES - STEEL FE-PL43S - ANNEALED - BAR AND WIRE - D[E] <= 40 MM FOR PREVAILING TORQUE NUTS |
| PREN 2768 : 200P2 | AEROSPACE SERIES - STEEL FE-PL79 - CARBURIZED, HARDENED AND TEMPERED -1180 <= R[M] <= 1550 MPA - FORGINGS - D[E] <= 150 MM |
| PREN 2771 : 200P2 | AEROSPACE SERIES - STEEL FE-PL53S - HARDENED AND TEMPERED - 1100 <= R[M] <= 1250 MPA - BAR - D[E] <= 110 MM |
| PREN 2780 : 200P1 | AEROSPACE SERIES - STEEL FE-PL56 - HARDENED AND TEMPERED - 1250 <= R[M] <= 1400 MPA - FORGINGS - D[E] <= 70 MM |
| PREN 2767 : 200P2 | AEROSPACE SERIES - STEEL FE-PL79 - CARBURIZED, HARDENED AND TEMPERED - 1180 <= R[M] <= 1550 MPA - BAR FOR MACHINING - D[E] <= 150 MM |
| PREN 2779 : 200P1 | AEROSPACE SERIES - STEEL FE-PL56 - HARDENED AND TEMPERED - 1250 <= R[M] <= 1400 MPA - BAR - D[E] <= 70 MM |
| PREN 2543 : 200P2 | AEROSPACE SERIES - STEEL FE-PL43S - ANNEALED - SHEET AND STRIP - 0,3 <= A <= 2 MM FOR PREVAILING TORQUE NUTS |
| PREN 3478 : 200P1 | AEROSPACE SERIES - STEEL FE-PM63 - SOLUTION ANNEALED, TRANSFORMATION TREATED AND PRECIPITATION HARDENED - 1310 <= R[M] <= 1550 MPA - SHEET AND STRIP - A <= 6 MM |
| PREN 3555 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7075) - SOLUTION TREATED, CONTROLLED STRETCHED AND ARTIFICIALLY AGED (T79510) - EXTRUDED BARS AND SECTION 1.2 < (A OR D) <= 100 MM - WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 4800-007 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 7: REMELTING STOCK |
| PREN 4700-007 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| PREN 4800-004 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 4: WIRE |
| PREN 4700-001 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| PREN 3468 : 200P1 | AEROSPACE SERIES - STEEL FE-PA13 - SOFTENED - 500 < R[M] <= 700 MPA - FORGINGS - D[E] <= 100 MM |
| PREN 3522 : 200P1 | AEROSPACE SERIES - STEEL FE-PL79 - SOFTENED - REFERENCE HEAT TREATMENT: CARBURIZED, HARDENED AND TEMPERED - FORGING STOCK - D[E] <= 200 MM |
| PREN 4700-002 : 200P3 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| PREN 4500-001 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| PREN 4500-003 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING SLLOYS |
| UNI EN 4800-002 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| I.S. EN 4800-001:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| I.S. EN 4800-008:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| I.S. EN 4700-004:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| I.S. EN 4500-001:2012 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| I.S. EN 4632-002:2008 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS |
| I.S. EN 4258:1998 | AEROSPACE SERIES - METALLIC MATERIALS - GENERAL ORGANIZATION OF STANDARDIZATION - LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE |
| EN 1780-1:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system |
| PREN 4500-001 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| EN 10020:2000 | Definition and classification of grades of steel |
| TR 3900 : 1 | AEROSPACE SERIES - METALLIC MATERIALS - RELATIONSHIP BETWEEN AECMA DESIGNATION SYSTEMS |
| EN 4258:1998 | Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.