• There are no items in your cart

EN 4700-005:2010

Current

Current

The latest, up-to-date edition.

Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock

Published date

01-09-2010

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Wording of order
5 Health and safety
6 Technical requirements

This European Standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat resisting alloy forging stock. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.

Committee
ASD-STAN
DevelopmentNote
Supersedes PREN 4700-005. (04/2011)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

UNI EN 2252 : 2013 AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - 1080 MPA <= R[M] <= 1250 MPA - FORGINGS - D[E] <= 100 MM
I.S. EN 2252:2012 AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - 1080 MPA <= R[M] <= 1250 MPA - FORGINGS - D[E] <= 100 MM
I.S. EN 4629:2013 AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - SOFTENED - FORGING STOCK - D[E] <= 300 MM
11/30243867 DC : 0 BS EN 4629 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - FORGING STOCK - D[E] <= 300 MM
BS EN 2252:2012 Aerospace series. Steel FE-PL1505 (15CrMoV6). 1 080 MPa ≤ Rm ≤ 1 250 MPa. Forgings. De ≤ 100 mm
EN 2252:2012 Aerospace series - Steel FE-PL1505 (15CrMoV6) - 1 080 MPa ≤ Rm ≤ 1 250 MPa - Forgings - De ≤ 100 mm
BS EN 4670:2010 Aerospace series. Steel FEPM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Softened. Forging stock. a or D ≤ 300 mm
I.S. EN 4670:2010 AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
EN 4670:2010 Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D ≤ 300 mm
EN 4629:2013 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Softened - Forging stock - De ≤ 300 mm
UNI EN 4672 : 2012 AEROSPACE SERIES - STEEL FE-PM1504 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
UNI EN 4629 : 2013 AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - SOFTENED - FORGING STOCK - D[E] <= 300 MM
UNI EN 4670 : 2011 AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM
BS EN 4629:2013 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Softened. Forging stock. De ≤ 300 mm

EN 9100:2009 Quality Management Systems - Requirements for Aviation, Space and Defense Organizations
ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
EN ISO 6508-1:2016 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
PREN 2002-16 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 16: NON-DESTRUCTIVE TESTING - PENETRANT TESTING
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
EN 10079:2007 Definition of steel products
EN 2950:2008 Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects
PREN 4050-1 : 200P1 AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION BARS, PLATES, FORGING STOCK AND FORGINGS - GENERAL INFORMATION
EN 2032-2:1994 Aerospace series - Metallic materials - Part 2: Coding of metallurgical condition in delivery condition
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
SAE AMS 2750 : 2012 PYROMETRY
EN 10045-1 : 1990 METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
ISO 3887:2003 Steels Determination of depth of decarburization
PREN 3874 : 200P1 AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE FORCE-CONTROLLED LOW CYCLE FATIGUE TESTING
ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
EN 2032-1:2001 Aerospace series - Metallic materials - Part 1: Conventional designation
ASTM E 1444 : 2005 Standard Practice for Magnetic Particle Testing
EN ISO 3651-1 : 1998 DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - PART 1: AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN NITRIC ACID MEDIUM BY MEASUREMENT OF LOSS IN MASS (HUEY TEST)
PREN 3987 : 200P1 AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE FORCE-CONTROLLED HIGH CYCLE FATIGUE TESTING
ISO 3651-1:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
EN ISO 3651-2 : 1998 DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID
PREN 4259 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - DEFINITION OF GENERAL TERMS
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
EN 2002-002:2005 Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature
SAE AMS 2315 : 2013 DETERMINATION OF DELTA FERRITE CONTENT
ASTM E 709 : 2015 : REDLINE Standard Guide for Magnetic Particle Testing
EN 2002-005:2007 Aerospace series - Test methods for metallic materials - Part 005: Uninterrupted creep and stress-rupture testing
EN 4258:1998 Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use
EN 2002-001:2005 Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature
PREN 3988 : 200P1 AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE STRAIN-CONTROLLED LOW CYCLE FATIGUE TESTING
PREN 4050-4 : 200P1 AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - ACCEPTANCE CRITERIA
PREN 2951 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - MICROGRAPHIC DETERMINATION OF CONTENT OF NON-METALLIC INCLUSIONS
EN 2078:2001 Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.