• Shopping Cart
    There are no items in your cart

EN 2078:2001

Current

Current

The latest, up-to-date edition.

Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval

Published date

05-12-2001

Sorry this product is not available in your region.

Foreword
0 Introduction
1 Scope
2 Normative references
3 Definitions
4 Manufacturing schedule
5 Inspection schedule
6 Inspection and test report

This standard defines the manufacturing schedule, inspection schedule and inspection and test report for EN aerospace metallic semi-finished products. It also specifies the general principles, preparation and approval of these documents.It shall be used with the relevant semi-finished product definition documents (level 3) defined in EN 4258.

Committee
ASD-STAN
DevelopmentNote
Supersedes PREN 2078. (06/2003) Supersedes UNE EN 2078. (05/2005)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

I.S. EN 4700-007:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
BS EN 4700-001:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip
00/705877 DC : 0 PREN 4400-3 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 3: BAR AND SECTION
BS EN 4050-1:2012 Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings General requirements
BS EN 3875:2017 Aerospace series. Metallic materials, Filler metal for brazing. Technical specification
10/30228108 DC : 0 BS EN 4400-9 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOYS - TECHNICAL SPECIFICATION - PART 9: PRE-PRODUCTION AND PRODUCTION CASTINGS
13/30290101 DC : 0 BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
XP PREN 3641 : 1994 XP AEROSPACE SERIES - TEST METHODS - HEAT RESISTING ALLOYS COMPACTED MATERIAL - PROCEDURE FOR QUANTITATIVE DETERMINATION OF THERMALLY INDUCED POROSITY (T.I.P.)
UNI EN 4700-006 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
01/710777 DC : 0 PREN 3875 - AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR BRAZING - TECHNICAL SPECIFICATION
01/713948 DC : 0 PREN 4400-6 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 6: FORGING STOCK
96/716567 DC : 0 PREN 4400-1 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 1: GENERAL REQUIREMENTS
BS EN 4700-005:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock
XP PREN 4258 : 1996 XP AEROSPACE SERIES - METALLIC MATERIALS - GENERAL ORGANIZATION OF STANDARDIZATION - LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE
UNI EN 4800-006 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
PREN 4400-6 : 200P1 AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOYS - TECHNICAL SPECIFICATION - PART 6: ALUMINIUM ALLOY FORGING STOCK
PREN 4700-004 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 4: WIRE
PREN 4700-005 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
PREN 4800-006 : 200P2 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS
PREN 4800-005 : 200P2 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK
PREN 4700-003 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
PREN 3640 : 200P1 AEROSPACE SERIES - TEST METHODS - HEAT RESISTING ALLOYS ATOMIZED POWDER - PROCEDURE FOR THE INSPECTION OF LOOSE POWDER CLEANNESS BY WATER ELUTRIATION
PREN 4700-006 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
PREN 3718 : 200P1 AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF TUBES
PREN 4800-003 : 200P2 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 3: TUBE
PREN 4259 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - DEFINITION OF GENERAL TERMS
PREN 3879 : 200P2 AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR WELDING - TECHNICAL SPECIFICATION
PREN 3877 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - DETERMINATION OF SOLIDUS AND LIQUIDUS TEMPERATURES BY DIFFERENTIAL THERMAL ANALYSIS OF BRAZE ALLOYS
NF EN 4700-007 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
UNI EN 4050-1 : 2013 AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 1: GENERAL REQUIREMENTS
I.S. EN 3718:2012 AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF TUBES
DIN EN 2858-3:1994-06 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - FORGING STOCK AND FORGINGS - TECHNICAL SPECIFICATION - PART 3: PRE-PRODUCTION AND PRODUCTION FORGINGS
BS EN 2103-3:1992 Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification Pre-production and production castings
BS EN 2157-1:1993 Steel. Forging stock and forgings. Technical specifications General requirements
01/710778 DC : 0 PREN 3879 - AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR WELDING - TECHNICAL SPECIFICATION
BS EN 4700-006:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings
XP PREN 4261 : 1998 XP AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TEST METHOD STANDARDS
92/77415 DC : 0 PREN 2069-1 - AEROSPACE SERIES - STEEL WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 1: GENERAL REQUIREMENTS
EN 4700-002:2016 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section
BS EN 4700-003:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube
03/306584 DC : 0 EN 4400-5 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOY PRODUCTS - TECHNICAL SPECIFICATION - PART 5: ALUMINIUM AND ALUMINIUM ALLOY RIVET WIRE
95/715392 DC : 0 PREN 4261-1 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TEST METHOD STANDARDS - PART 1: GENERAL REQUIREMENTS
NF EN 2950 : 2008 AEROSPACE SERIES - TEST METHOD - WROUGHT HEAT RESISTING ALLOYS SEMI-FINISHED PRODUCTS AND PARTS - CONDITIONS FOR MACROGRAPHIC AND MICROGRAPHIC EXAMINATION - ATLAS OF STRUCTURES AND DEFECTS
UNI EN 4800-004 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE
NF EN 4700-005 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
UNI EN 4800-005 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
01/716043 DC : 0 PREN 4800-5 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK
NF EN 4800-003 : 2012 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE
PREN 2950 : 200P1 AEROSPACE SERIES - TEST METHOD - WROUGHT HEAT RESISTING ALLOYS - SEMI-FINISHED PRODUCTS AND PARTS - CONDITIONS FOR MACROGRAPHIC AND MICROGRAPHIC EXAMINATION - ATLAS OF STRUCTURES AND DEFECTS
PREN 6070 : 200P1 AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - GENERAL REQUIREMENTS
PREN 3225-1 : 200P1 AEROSPACE SERIES - HEAT RESISTING ALLOYS PRODUCED FROM ATOMIZED POWDER - POWDER COMPACTED FORGING STOCK AND PARTS - TECHNICAL SPECIFICATION - PART 1 - GENERAL REQUIREMENTS
I.S. EN 4800-002:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
NF EN 4800-006 : 2012 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
UNI EN 3718 : 2013 AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF TUBES
NF EN 4800-002 : 2012 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
UNI EN 4700-007 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
NF EN 4700-002 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
I.S. EN 4700-006:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
EN 3875:2017 Aerospace series - Metallic materials, Filler metal for brazing - Technical specification
DIN EN 2103-3:1991-11 AEROSPACE SERIES - STEEL, NICKEL BASE AND COBALT BASE ALLOY REMELTING STOCK AND CASTINGS - TECHNICAL SPECIFICATION - PART 3: PRE-PRODUCTION AND PRODUCTION CASTINGS
BS EN 4700-004:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire
NF EN 4800-005 : 2012 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
UNI EN 4700-005 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
BS EN 4700-002:2016 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section
UNI EN 4700-004 : 2011 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire
BS EN 4800-006:2010 Aerospace series. Titanium and titanium alloys. Technical specification Pre-production and production forgings
I.S. EN 4800-005:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
02/708860 DC : 0 PREN 4800-1 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 1: PLATE, SHEET AND STRIP
BS EN 4800-005:2010 Aerospace series. Titanium and titanium alloys. Technical specification Forging stock
UNI EN 4800-008 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS
NF EN 4700-006 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
PREN 3875 : 200P2 AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR BRAZING - TECHNICAL SPECIFICATION
PREN 4260 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TECHNICAL SPECIFICATIONS
PREN 3641 : 200P1 AEROSPACE SERIES - TEST METHODS - HEAT RESISTING ALLOYS COMPACTED MATERIAL - PROCEDURE FOR QUANTITATIVE DETERMINATION OF THERMALLY INDUCED POROSITY (T.I.P.)
I.S. EN 4700-001:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
UNI EN 4700-003 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
NF EN 4700-003 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
I.S. EN 4800-004:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE
UNI EN 4800-007 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
BS EN 2103-1:1992 Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification. General requirements
UNI EN 4800-001 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
NF EN 4800-008 : 2012 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS
NF EN 4800-007 : 2012 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
BS EN 4800-008:2010 Aerospace series. Titanium and titanium alloys. Technical specification Pre-production and production castings
UNI EN 4800-003 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE
BS EN 2950:2008 Aerospace series. Test method. Wrought heat resisting alloys Semifinished products and parts. Conditions for macrographic and micrographic examination. Atlas of structures and defects
BS EN 4800-001:2010 Aerospace series. Titanium and titanium alloys. Technical specification Plate, sheet and strip
05/30129551 DC : 0 PREN 4700-5 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK
11/30253929 DC : 0 BS EN 4820 - AEROSPACE SERIES - COPPER AND COPPER ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION
BS EN 4800-004:2010 Aerospace series. Titanium and titanium alloys. Technical specification Wire
BS EN 4800-002:2010 Aerospace series. Titanium and titanium alloys. Technical specification Bar and section
03/306585 DC : 0 EN 4400-7 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOY PRODUCTS - TECHNICAL SPECIFICATION - PART 7: ALUMINIUM ALLOY FORGINGS
BS EN 4800-003:2010 Aerospace series. Titanium and titanium alloys. Technical specification Tube
UNE-EN 3718:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
01/716044 DC : 0 EN 4800-6 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS
NF EN 4700-001 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
NF EN 4700-004 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE
NF EN 4800-004 : 2012 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE
05/30129555 DC : 0 PREN 4700-6 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS
PREN 2500/1 : 200P4 AEROSPACE SERIES - INSTRUCTIONS FOR THE DRAFTING AND USE OF METALLIC MATERIAL STANDARDS - PART 1: GENERAL REQUIREMENTS
PREN 4800-008 : 200P2 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 8: PRE-PRODUCTION AND PRODUCTION CASTINGS
PREN 4800-002 : 200P2 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 2: BAR AND SECTION
I.S. EN 4050-1:2012 AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 1: GENERAL REQUIREMENTS
NF EN 4800-001 : 2012 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
I.S. EN 4800-008:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS
UNI EN 4700-001 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
I.S. EN 4700-005:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
I.S. EN 3875:2017 AEROSPACE SERIES - METALLIC MATERIALS, FILLER METAL FOR BRAZING - TECHNICAL SPECIFICATION
DIN EN 2103-1:1991-11 AEROSPACE SERIES - STEEL, NICKEL BASE AND COBALT BASE ALLOY REMELTING STOCK AND CASTINGS - TECHNICAL SPECIFICATION - PART 1 - GENERAL REQUIREMENTS
BS EN 2157-3:1993 Steel. Forging stock and forgings. Technical specifications Pre-production and production forgings
BS EN 4258:1998 Metallic materials. General organization of standardization. Links between types of EN standards and their use
BS EN 2545-1:1995 Titanium and titanium alloy remelting stock and castings. Technical specification General requirements
EN 4800-003:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 003: Tube
EN 4800-002:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar and section
EN 4800-001:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip
EN 2950:2008 Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects
EN 4700-005:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock
EN 4258:1998 Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use
EN 4700-003:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube
EN 2858-1:1994 Aerospace series - Titanium and titanium alloys - Forging stock and forgings - Technical specification - Part 1: General requirements
EN 2545-3:1995 Aerospace series - Titanium and titanium alloy remelting stock and castings - Technical specification - Part 3: Pre-production and production castings
EN 2858-3:1994 Aerospace series - Titanium and titanium alloys - Forging stock and forgings - Technical specification - Part 3: Pre-production and production forgings
EN 4700-007:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock
EN 4050-1:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 1: General requirements
EN 3718:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
EN 2157-3:1993 Aerospace series - Steel - Forging stock and forgings - Technical specification - Part 3: Pre-production and production forgings
EN 4800-004:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 004: Wire
EN 2545-1:1995 Aerospace series - Titanium and titanium alloy remelting stock and castings - Technical specification - Part 1: General requirements
EN 4800-008:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 008: Pre-production and production castings
EN 4800-007:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 007: Remelting stock
EN 4800-005:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock
EN 4700-004:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire
EN 4700-001:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip
EN 4800-006:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 006: Pre-production and production forgings
EN 4700-006:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings
EN 2157-1:1993 Aerospace series - Steel - Forging stock and forgings - Technical specification - Part 1: General requirements
01/716045 DC : 0 PREN 4800-7 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 7: RE-MELTING STOCK
05/30129558 DC : 0 PREN 4700-7 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 7: REMELTING STOCK
BS EN 3718:2012 Aerospace series. Test method for metallic materials. Ultrasonic inspection of tubes
I.S. EN 4700-003:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
I.S. EN 4800-006:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
BS EN 4700-007:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Remelting stock
I.S. EN 4800-003:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE
BS EN 4800-007:2010 Aerospace series. Titanium and titanium alloys Remelting stock
I.S. EN 4800-007:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
01/716046 DC : 0 PREN 4800-8 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 8: PRE-PRODUCTION AND PRODUCTION CASTINGS
I.S. EN 2950:2008 AEROSPACE SERIES - TEST METHOD - WROUGHT HEAT RESISTING ALLOYS SEMI-FINISHED PRODUCTS AND PARTS - CONDITIONS FOR MACROGRAPHIC AND MICROGRAPHIC EXAMINATION - ATLAS OF STRUCTURES AND DEFECTS
PREN 4800-001 : 200P2 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 1: PLATE, SHEET AND STRIP
I.S. EN 4700-002:2016 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
PREN 4400-1 : 200P1 AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 1: PLATE
PREN 4800-007 : 200P2 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 7: REMELTING STOCK
PREN 4261 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TEST METHOD STANDARDS
PREN 4050-1 : 200P1 AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION BARS, PLATES, FORGING STOCK AND FORGINGS - GENERAL INFORMATION
PREN 4700-007 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
PREN 4800-004 : 200P2 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 4: WIRE
PREN 4700-001 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
PREN 4700-002 : 200P3 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
UNI EN 4800-002 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
S.R. CWA 16762:2014 CEN WORKSHOP AGREEMENT - CEN/WS SERES - ICT STANDARDS IN SUPPORT OF AN EREPORTING FRAMEWORK FOR THE ENGINEERING MATERIALS SECTOR
I.S. EN 4800-001:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
I.S. EN 4700-004:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE
XP PREN 4260 : 1998 XP AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TECHNICAL SPECIFICATIONS
DIN EN 2858-1:1994-06 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - FORGING STOCK AND FORGINGS - TECHNICAL SPECIFICATION - PART 1: GENERAL REQUIREMENTS
I.S. EN 4258:1998 AEROSPACE SERIES - METALLIC MATERIALS - GENERAL ORGANIZATION OF STANDARDIZATION - LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE

EN 3042 : 1991 AEROSPACE SERIES - QUALITY ASSURANCE - EN AEROSPACE PRODUCTS - QUALIFICATION PROCEDURE
EN 2000:1991 Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers
EN 10204:2004 Metallic products - Types of inspection documents
PREN 4259 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - DEFINITION OF GENERAL TERMS
EN 4258:1998 Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.