EN 2435-002:2006
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 002: High corrosion resistance
31-12-2006
21-06-2006
Foreword
0 Introduction
1 Scope
2 Normative references
3 Definitions
4 Classification
5 Batch release and qualification testing
This standard defines the requirements for a two component, chromated epoxy or polyurethane, high corrosion resistant primer with a degree of resistance to aircraft fluids which can be used with or without a finish for aerospace applications.The properties specified in this standard are obtained on defined aluminium alloy test pieces prepared in accordance with EN 3837 and ISO 3270. The ability of the material to be used for a specific application (e.g. alternative substrate, alternative primer, specific drying conditions etc.) shall be determined by supplementary tests to confirm that the requirements of this standard are met.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 2435-2. (08/2006)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| NEN EN 2435-002 : 2006 | Identical |
| I.S. EN 2435-002:2006 | Identical |
| NS EN 2435-002 : 1ED 2006 | Identical |
| NBN EN 2435-002 : 2006 | Identical |
| PN EN 2435-002 : 2006 | Identical |
| DIN EN 2435-002:2007-04 | Identical |
| UNE-EN 2435-002:2006 | Identical |
| BS EN 2435-002:2006 | Identical |
| SN EN 2435-002 : 2006 | Identical |
| NF EN 2435-002 : 2006 | Identical |
| UNI EN 2435-002 : 2008 | Identical |
| BS EN 2434-004:2010 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish High flexibility |
| UNI EN 2434-004 : 2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 004: HIGH FLEXIBILITY |
| I.S. EN 2434-001:2010 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 001: BASIC REQUIREMENTS |
| I.S. EN 2434-004:2010 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 004: HIGH FLEXIBILITY |
| BS EN 2434-002:2010 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish High chemical resistance |
| BS EN 4476:2011 | Aerospace series. Paints and varnishes. Cold curing intermediate coat |
| EN 2434-002:2010 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 002: High chemical resistance |
| EN 2434-004:2010 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 004: High flexibility |
| UNI EN 2434-001 : 2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 001: BASIC REQUIREMENTS |
| BS EN 2434-001:2010 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish Basic requirements |
| I.S. EN 2434-002:2010 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 002: HIGH CHEMICAL RESISTANCE |
| UNI EN 2434-002 : 2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 002: HIGH CHEMICAL RESISTANCE |
| EN 4476:2011 | Aerospace series - Paints and varnishes - Cold curing intermediate coat |
| EN 2434-001:2010 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 001: Basic requirements |
| 17/30371000 DC : 0 | BS EN 4476 - AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| I.S. EN 4476:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| UNI EN 4476 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| PREN 2709 : 1 | AEROSPACE SERIES - ALUMINIUM ALLOY 2024-T3510 - BAR AND SECTION - 1,2 <= (A OR D) <= 150 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| EN 2334:1997 | Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys |
| PREN 2379 : 200P1 | AEROSPACE SERIES - FLUIDS FOR ASSESSMENT OF NON-METALLIC MATERIALS |
| PREN 3840 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| PREN 3837 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - NATURE AND METHOD FOR SURFACE PREPARATION OF TEST PIECES IN ALUMINIUM ALLOYS |
| PREN 4385 : 200P2 | AEROSPACE SERIES - NON-METALLIC MATERIALS - GENERAL ORGANISATION OF STANDARDISATION - LINKS BETWEEN TYPES OF STANDARDS |
| TR 7000-9 : 1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - RULES FOR THE DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 9: PAINTS AND VARNISHES |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.