EN 9100:2009
|
Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
PREN 4158 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR MEASUREMENT OF ELECTRICAL SURFACE RESISTANCE OF CONDUCTIVE LAYERS |
EN 23270:1991
|
Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing (ISO 3270:1984) |
ISO 7724-1:1984
|
Paints and varnishes Colorimetry Part 1: Principles |
ISO 2811-1:2016
|
Paints and varnishes — Determination of density — Part 1: Pycnometer method |
PREN 4170 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR MEASUREMENT OF RESISTANCE TO COLD CRACK TEMPERATURE CYCLE |
PREN 4171 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR DETERMINATION OF PHOSPHORIC ACID INDEX |
ISO 2114:2000
|
Plastics (polyester resins) and paints and varnishes (binders) Determination of partial acid value and total acid value |
ISO 2812-2:2007
|
Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method |
ISO 3233:1998
|
Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of a dried coating |
PREN 4195 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR DETERMINATION OF CHROMATE LEACHING |
EN ISO 3001 : 1999
|
PLASTICS - EPOXY COMPOUNDS - DETERMINATION OF EPOXY EQUIVALENT |
ISO 2718:1974
|
Standard layout for a method of chemical analysis by gas chromatography |
ISO 4617:2000
|
Paints and varnishes List of equivalent terms |
ISO 9702:1996
|
Plastics Amine epoxide hardeners Determination of primary, secondary and tertiary amine group nitrogen content |
PREN 3847 : 200P2
|
AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SEDIMENTATION RATING |
EN ISO 2114:2000/AC:2005
|
PLASTICS (POLYESTER RESINS) AND PAINTS AND VARNISHES (BINDERS) - DETERMINATION OF PARTIAL ACID VALUE AND TOTAL ACID VALUE |
ASTM D 2370 : 2016 : REDLINE
|
Standard Test Method for Tensile Properties of Organic Coatings |
EN ISO 2431:2011
|
Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
ISO 2811-3:2011
|
Paints and varnishes — Determination of density — Part 3: Oscillation method |
ISO 3675:1998
|
Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
EN ISO 3668:2001
|
Paints and varnishes - Visual comparison of the colour of paints (ISO 3668:1998) |
PREN 4592 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR DETERMINATION OF INFRARED REFLECTANCE |
ISO 4623-2:2016
|
Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates |
ISO 3001:1999
|
Plastics Epoxy compounds Determination of epoxy equivalent |
ISO 2884-1:1999
|
Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear |
ISO 6270-1:1998
|
Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation |
ISO 5661:1983
|
Petroleum products Hydrocarbon liquids Determination of refractive index |
ISO 2808:2007
|
Paints and varnishes Determination of film thickness |
ISO 6504-3:2006
|
Paints and varnishes Determination of hiding power Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate |
EN ISO 1524:2013
|
Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2013) |
EN ISO 11890-2:2013
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
PREN 4159 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO MICROBIAL GROWTH |
EN ISO 15528:2013
|
Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2013) |
ISO 1520:2006
|
Paints and varnishes Cupping test |
EN ISO 2811-2:2011
|
Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
ISO 7724-2:1984
|
Paints and varnishes Colorimetry Part 2: Colour measurement |
EN ISO 2409:2013
|
Paints and varnishes - Cross-cut test (ISO 2409:2013) |
ISO 11507:2007
|
Paints and varnishes Exposure of coatings to artificial weathering Exposure to fluorescent UV lamps and water |
ISO 14680-3:2000
|
Paints and varnishes Determination of pigment content Part 3: Filtration method |
ISO 3668:2017
|
Paints and varnishes — Visual comparison of colour of paints |
EN ISO 7253 : 2001
|
PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
DIN 6175-1:2009-07
|
TOLERANCES FOR AUTOMOTIVE PAINTS - PART 1: UNI PAINTS |
EN ISO 3675:1998
|
Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
EN ISO 3251:2008
|
Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
ISO 3678:1976
|
Paints and varnishes — Print-free test |
EN ISO 9514:2005
|
Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005) |
ISO 9117:1990
|
Paints and varnishes — Determination of through-dry state and through-dry time — Method of test |
EN ISO 2811-1:2016
|
Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
EN ISO 2811-3:2011
|
Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011) |
ISO 3679:2015
|
Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
EN 29117 : 1992
|
PAINTS AND VARNISHES - DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME - METHOD OF TEST |
ISO 4623-1:2000
|
Paints and varnishes Determination of resistance to filiform corrosion Part 1: Steel substrates |
ISO 15528:2013
|
Paints, varnishes and raw materials for paints and varnishes Sampling |
ISO 11909:2007
|
Binders for paints and varnishes — Polyisocyanate resins — General methods of test |
ISO 2810:2004
|
Paints and varnishes Natural weathering of coatings Exposure and assessment |
EN ISO 1513:2010
|
Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
PREN 4508 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR ANTI SLIP COATINGS - DETERMINATION OF THE SLIDING FRICTION BEHAVIOUR |
ISO 7253:1996
|
Paints and varnishes — Determination of resistance to neutral salt spray (fog) |
ISO 7724-3:1984
|
Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
ISO 11890-1:2007
|
Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
EN ISO 3680:2004
|
Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004) |
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
EN ISO 11341:2004
|
Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation (ISO 11341:2004) |
ISO 6286:1982
|
Molecular absorption spectrometry Vocabulary General Apparatus |
ISO 2811-2:2011
|
Paints and varnishes Determination of density Part 2: Immersed body (plummet) method |
ISO 11341:2004
|
Paints and varnishes Artificial weathering and exposure to artificial radiation Exposure to filtered xenon-arc radiation |
PREN 4160 : 200P1
|
AEROSPACE SERIES - NON-METALLIC MATERIALS - PAINTS AND VARNISHES - TEST METHODS - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE |
ISO 1517:1973
|
Paints and varnishes Surface-drying test Ballotini method |
ISO 1518:1992
|
Paints and varnishes Scratch test |
EN 10204:2004
|
Metallic products - Types of inspection documents |
EN ISO 2811-4:2011
|
Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011) |
EN ISO 1520:2006
|
Paints and varnishes - Cupping test (ISO 1520:2006) |
ISO 9001:2015
|
Quality management systems — Requirements |
EN ISO 11890-1:2007
|
Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
ISO 2812-1:2017
|
Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
TR 7000-9 : 1
|
AEROSPACE SERIES - NON-METALLIC MATERIALS - RULES FOR THE DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 9: PAINTS AND VARNISHES |
ISO 6272-1:2011
|
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter |
ISO 2811-4:2011
|
Paints and varnishes Determination of density Part 4: Pressure cup method |
ISO 1513:2010
|
Paints and varnishes Examination and preparation of test samples |
ISO 3251:2008
|
Paints, varnishes and plastics Determination of non-volatile-matter content |
ISO 4629:1996
|
Binders for paints and varnishes Determination of hydroxyl value Titrimetric method |
EN ISO 2810:2004
|
Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2004) |
ISO 1519:2011
|
Paints and varnishes Bend test (cylindrical mandrel) |
EN ISO 9702 : 1998
|
PLASTICS - AMINE EPOXIDE HARDENERS - DETERMINATION OF PRIMARY, SECONDARY AND TERTIARY AMINE GROUP NITROGEN CONTENT |
ISO 3680:2004
|
Determination of flash/no flash Rapid equilibrium closed cup method |
ISO 3270:1984
|
Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
ISO 14680-1:2000
|
Paints and varnishes Determination of pigment content Part 1: Centrifuge method |
EN ISO 1519:2011
|
Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
EN ISO 3679:2015
|
Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
EN ISO 1518:2000
|
Paints and varnishes - Scratch test (ISO 1518:1992) |
EN ISO 11909:2007
|
Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) |
ISO 1524:2013
|
Paints, varnishes and printing inks Determination of fineness of grind |
ISO 6504-1:1983
|
Paints and varnishes Determination of hiding power Part 1: Kubelka-Munk method for white and light-coloured paints |
EN ISO 4617 : 2000
|
PAINTS AND VARNISHES - LIST OF EQUIVALENT TERMS |
EN ISO 4629:1998
|
Binders for paints and varnishes - Determination of hydroxyl value - Titrimetric method (ISO 4629:1996) |
EN ISO 4623-1:2002
|
Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates (ISO 4623-1:2000) |
ISO 2409:2013
|
Paints and varnishes Cross-cut test |
ISO 11890-2:2013
|
Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method |
ISO 9514:2005
|
Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing |
ISO 760:1978
|
Determination of water Karl Fischer method (General method) |
EN ISO 3678:1995
|
Paints and varnishes - Print-free test (ISO 3678:1976) |
EN ISO 4623-2:2016
|
Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2016) |
EN ISO 6272-1:2011
|
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) |
ISO 7784-2:2016
|
Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen |
ISO 15710:2002
|
Paints and varnishes — Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution |
EN ISO 2808:2007
|
Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
ISO 2813:2014
|
Paints and varnishes Determination of gloss value at 20, 60 and 85 |
EN ISO 2813:2014
|
Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
ISO 2431:2011
|
Paints and varnishes Determination of flow time by use of flow cups |
EN ISO 11507:2007
|
Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water (ISO 11507:2007) |
ISO 14680-2:2000
|
Paints and varnishes Determination of pigment content Part 2: Ashing method |