• There are no items in your cart

EN 303-5:2012

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking

Superseded date

16-04-2021

Published date

27-06-2012

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test
6 Test report and other documents
7 Marking
8 Technical documentation, supplied with boiler
Annex A (informative) - Manual measurement of particles
        in the gas flow, gravimetric determination of particle
        load with filter systems
Annex B (normative) - Design criteria for solutions to prevent
        back burning
Annex C (informative) - A-deviations
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of EU Directive
         2006/42/EC Machinery Directive
Bibliography

1.1GeneralThis European Standard applies to heating boilers including safety devices up to a nominal heat output of 500 kW which are designed for the burning of solid fuels only and are operated according to the instructions of the boiler manufacturer.This European Standard deals with significant hazards, hazardous situations and events relevant to heating boilers used as intended and under the conditions foreseen by the manufacturer (see Clause 4). The boilers may operate under natural draught or forced draught. The stoking may work manually or automatically. NOTEThis European Standard deals with boilers which are both within and outside of the scope of the Machinery Directive 2006/42/EC.This European Standard contains requirements and test methods for safety, combustion quality, operating characteristics, marking and maintenance of heating boilers. It also covers all external equipment that influences the safety systems (e.g. back burning safety device, integral fuel hopper).This European Standard covers only boilers that include burners as a unit. The standard applies to the combination of a boiler body with a solid fuel burner according to EN 15270 as a unit only when the whole unit is tested in accordance with this European Standard. Heating boilers in accordance with this European Standard are designed for central heating installations where the heat carrier is water and the maximum allowable temperature is 110 °C, and which can operate at a maximum allowable operating pressure of 6 bars. For heating boilers with a built-in or attached water heater (storage or continuous flow heater), this European Standard only applies to those parts of the water heater which are necessarily subject to the operating conditions of the heating boiler (heating part). This European Standard does not apply to:-heating boilers and other heating appliances which are also designed for the direct heating of the place of installation;-cooking appliances;-the design and construction of external fuel storage and transportation devices prior to the safety devices of the boiler;-room sealed applications;-condensing boilers.This European Standard specifies the necessary terminology for solid fuel heating boilers, the control and safety related requirements, the design requirements, the technical heating requirements (taking into account the environmental requirements) and testing, as well as the marking requirements. This European Standard is not applicable to heating boilers which are tested before the date of its publication as an EN (European Standard).(...)

DevelopmentNote
Supersedes PREN 303-5. (07/2012)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
DS EN 303-5 : 2012 Identical
DIN EN 303-5:2012-10 Identical
NEN EN 303-5 : 2012 Identical
BS EN 303-5:2012 Identical
PN EN 303-5 : 2012 Identical
NF EN 303-5 : 2012 Identical
NBN EN 303-5 : 2012 Identical
NS EN 303-5 : 2012 Identical
UNI EN 303-5 : 2012 Identical
UNE-EN 303-5:2013 Identical
SN EN 303-5 : 2012 Identical
I.S. EN 303-5:2012 Identical
ONORM EN 303-5 : 2012 Identical

DIN EN 14961-3:2011-09 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE
UNE-EN 14961-4:2012 Solid biofuels - Fuel specifications and classes - Part 4: Wood chips for non-industrial use
BS EN 15316-4-7:2008 Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies Space heating generation systems, biomass combustion systems
PD CEN/TR 15316-6-4:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies Explanation and justification of EN 15316-4-1, Module M3-8-1, M8-8-1
DIN EN ISO 17225-4:2014-09 Solid biofuels - Fuel specifications and classes - Part 4: Graded wood chips (ISO 17225-4:2014)
DIN EN ISO 17225-2 E : 2014 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: GRADED WOOD PELLETS (ISO 17225-2:2014)
10/30219000 DC : 0 BS EN 14961-3 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE
UNE-EN 14961-5:2011 Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use
00/242179 DC : DRAFT MAY 2000 IEC 60335-2-102, ED. 1 - PARTICULAR REQUIREMENTS FOR ELECTRICALLY SUPPLIED APPLIANCES WITH NON-ELECTRIC HEATING SOURCES FOR HOUSEHOLD AND SIMILAR USE
BS EN 14961-2:2011 Solid biofuels. Fuel specifications and classes Wood pellets for non-industrial use
12/30259577 DC : 0 BS EN ISO 17225-7 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 7: GRADED NON-WOODY BRIQUETTES
EN 15316-4-1:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating and DHW generation systems, combustion systems (boilers, biomass), Module M3-8-1, M8-8-1
DIN EN ISO 17225-5 E : 2014 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: GRADED FIREWOOD (ISO 17225-5:2014)
BS EN ISO 17225-5:2014 Solid biofuels. Fuel specifications and classes Graded firewood
12/30259568 DC : 0 BS EN ISO 17225-4 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: GRADED WOOD CHIPS
BS EN 14961-3:2011 Solid biofuels. Fuel specifications and classes Wood briquettes for non-industrial use
DIN EN ISO 17225-6 E : 2014 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: GRADED NON-WOODY PELLETS (ISO 17225-6:2014)
BS EN ISO 17225-7:2014 Solid biofuels. Fuel specifications and classes Graded non-woody briquettes
PREN 15316-4-1 : DRAFT 2014 HEATING SYSTEMS AND WATER BASED COOLING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-1: SPACE HEATING AND DHW GENERATION SYSTEMS, COMBUSTION SYSTEMS (BOILERS, BIOMASS)
EN ISO 17225-2:2014 Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets (ISO 17225-2:2014)
UNE-EN ISO 17225-7:2014 Solid biofuels - Fuel specifications and classes - Part 7: Graded non-woody briquettes (ISO 17225-7:2014)
UNI EN 15270 : 2008 PELLET BURNERS FOR SMALL HEATING BOILERS - DEFINITIONS, REQUIREMENTS, TESTING, MARKING
UNI EN 14961-4 : 2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE
CSA ISO 17225-6 : 2015 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: GRADED NON-WOODY PELLETS
UNI EN ISO 17225-6 : 2014 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: GRADED NON-WOODY PELLETS
UNI EN 15316-4-7 : 2009 HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-7: SPACE HEATING GENERATION SYSTEMS, BIOMASS COMBUSTION SYSTEMS
EN 14961-5:2011 Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use
EN 14961-3:2011 Solid biofuels - Fuel specifications and classes - Part 3: Wood briquettes for non-industrial use
EN 14961-2:2011 Solid biofuels - Fuel specifications and classes - Part 2: Wood pellets for non-industrial use
EN 14961-4:2011 Solid biofuels - Fuel specifications and classes - Part 4: Wood chips for non-industrial use
NF EN 15316-4-7 : 2009 HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-7: SPACE HEATING GENERATION SYSTEMS, BIOMASS COMBUSTION SYSTEMS
BS EN ISO 17225-2:2014 Solid biofuels. Fuel specifications and classes Graded wood pellets
12/30259574 DC : 0 BS EN ISO 17225-6 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: GRADED NON-WOODY PELLETS
14/30311499 DC : 0 BS EN 15316-4-1 - HEATING SYSTEMS AND WATER BASED COOLING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-1: SPACE HEATING AND DHW GENERATION SYSTEMS, COMBUSTION SYSTEMS (BOILERS, BIOMASS)
BS EN ISO 17225-4:2014 Solid biofuels. Fuel specifications and classes Graded wood chips
ISO 13675:2013 Heating systems in buildings Method and design for calculation of the system energy performance Combustion systems (boilers)
PD ISO/TS 17225-8:2016 Solid biofuels. Fuel specifications and classes Graded thermally treated and densified biomass fuels
UNI EN ISO 17225-5 : 2014 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: GRADED FIREWOOD
12/30259561 DC : 0 BS EN ISO 17225-2 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: GRADED WOOD PELLETS
CSA ISO 17225-5 : 2015 BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: GRADED FIREWOOD
PREN 14961-3 : DRAFT 2010 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE
I.S. EN ISO 17225-6:2014 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: GRADED NON-WOODY PELLETS (ISO 17225-6:2014)
I.S. EN 14961-5:2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
EN ISO 17225-5:2014 Solid biofuels - Fuel specifications and classes - Part 5: Graded firewood (ISO 17225-5:2014)
I.S. EN ISO 17225-7:2014 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 7: GRADED NON-WOODY BRIQUETTES (ISO 17225-7:2014)
I.S. EN ISO 17225-3:2014 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: GRADED WOOD BRIQUETTES (ISO 17225-3:2014)
ISO/TS 17225-8:2016 Solid biofuels — Fuel specifications and classes — Part 8: Graded thermally treated and densified biomass fuels
DIN EN 15270:2008-03 Pellet burners for small heating boilers - Definitions, requirements, testing, marking
EN ISO 17225-3:2014 Solid biofuels - Fuel specifications and classes - Part 3: Graded wood briquettes (ISO 17225-3:2014)
EN ISO 17225-4:2014 Solid biofuels - Fuel specifications and classes - Part 4: Graded wood chips (ISO 17225-4:2014)
VDI 3670:2016-04 Waste gas cleaning - Downstream dust control devices for small-sized solid fuel combustion systems
VDI 4207 Blatt 2:2016-07 Emission measurements at small firing installations - Measurements at installations for solid fuel
VDI 6012 Blatt 2.1:2015-12 Integration of distributed and renewables-based energy systems in buildings - Thermic systems - Biomass firing systems
VDI 3464:2015-09 Storage of wood pellets at the point of end use - Requirements for pellet stores, pellet production and delivery from health and safety aspects
12/30259571 DC : 0 BS EN ISO 17225-5 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: GRADED FIREWOOD
I.S. EN ISO 17225-5:2014 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: GRADED FIREWOOD (ISO 17225-5:2014)
12/30259565 DC : 0 BS EN ISO 17225-3 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: GRADED WOOD BRIQUETTES
DIN EN ISO 17225-5:2014-09 Solid biofuels - Fuel specifications and classes - Part 5: Graded firewood (ISO 17225-5:2014)
06/30145617 DC : 0 EN 15316-4-7 - HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-7: SPACE HEATING GENERATION SYSTEMS, BIOMASS COMBUSTION SYSTEMS
UNE-EN ISO 17225-5:2014 Solid biofuels - Fuel specifications and classes - Part 5: Graded firewood (ISO 17225-5:2014)
CSA ISO 17225-4 : 2015 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: GRADED WOOD CHIPS
UNI EN ISO 17225-2 : 2014 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: GRADED WOOD PELLETS
UNE-EN ISO 17225-2:2014 Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets (ISO 17225-2:2014)
BS EN ISO 17225-6:2014 Solid biofuels. Fuel specifications and classes Graded non-woody pellets
PREN 16510-1 : DRAFT 2013 RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
UNE-EN 14961-2:2012 Solid biofuels - Fuel specifications and classes - Part 2: Wood pellets for non-industrial use
BS EN ISO 17225-3:2014 Solid biofuels. Fuel specifications and classes Graded wood briquettes
DIN EN 14961-2:2011-09 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE
DIN EN ISO 17225-4 E : 2014 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: GRADED WOOD CHIPS (ISO 17225-4:2014)
UNE-EN ISO 17225-6:2014 Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets (ISO 17225-6:2014)
UNE-EN 15316-4-1:2010 Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating generation systems, combustion systems (boilers)
UNI EN ISO 17225-7 : 2014 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 7: GRADED NON-WOODY BRIQUETTES
I.S. EN 15316-4-7:2008 HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-7: SPACE HEATING GENERATION SYSTEMS, BIOMASS COMBUSTION SYSTEMS
UNI EN ISO 17225-4 : 2014 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: GRADED WOOD CHIPS
I.S. EN 14961-3:2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE
UNE-EN ISO 17225-3:2014 Solid biofuels - Fuel specifications and classes - Part 3: Graded wood briquettes (ISO 17225-3:2014)
DIN EN 15270 E : 2008 PELLET BURNERS FOR SMALL HEATING BOILERS - DEFINITIONS, REQUIREMENTS, TESTING, MARKING
CSA ISO 17225-7 : 2015 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 7: GRADED NON-WOODY BRIQUETTES
DIN EN ISO 17225-2:2014-09 Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets (ISO 17225-2:2014); German version EN ISO 17225-2:2014
UNI EN ISO 17225-3 : 2014 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: GRADED WOOD BRIQUETTES
10/30219003 DC : 0 BS EN 14961-4 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE
DIN EN 14961-5:2011-09 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
DIN EN 15316-4-7:2009-02 HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-7: SPACE HEATING GENERATION SYSTEMS, BIOMASS COMBUSTION SYSTEMS
DIN EN ISO 17225-6:2014-09 Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets (ISO 17225-6:2014)
I.S. EN ISO 17225-2:2014 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: GRADED WOOD PELLETS (ISO 17225-2:2014)
10/30218997 DC : 0 BS EN 14961-2 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE
CSA ISO 17225-3 : 2015 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: GRADED WOOD BRIQUETTES
DIN EN ISO 17225-3 E : 2014 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: GRADED WOOD BRIQUETTES (ISO 17225-3:2014)
DIN EN ISO 17225-3:2014-09 Solid biofuels - Fuel specifications and classes - Part 3: Graded wood briquettes (ISO 17225-3:2014)
CEN/TR 15316-6-4:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-4: Explanation and justification of EN 15316-4-1, Module M3-8-1, M8-8-1
DIN EN 14961-4:2011-09 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE
EN ISO 17225-7:2014 Solid biofuels - Fuel specifications and classes - Part 7: Graded non-woody briquettes (ISO 17225-7:2014)
I.S. EN 14961-4:2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE
I.S. EN ISO 17225-4:2014 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: GRADED WOOD CHIPS (ISO 17225-4:2014)
UNI EN 14961-3 : 2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE
CSA ISO 17225-2 : 2015 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: GRADED WOOD PELLETS
13/30271701 DC : 0 BS EN 16510-1 - RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
I.S. EN 14961-2:2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE
BS EN 15270:2007 Pellet burners for small heating boilers. Definitions, requirements, testing, marking
ISO 17225-3:2014 Solid biofuels Fuel specifications and classes Part 3: Graded wood briquettes
ISO 17225-7:2014 Solid biofuels Fuel specifications and classes Part 7: Graded non-woody briquettes
ISO 17225-4:2014 Solid biofuels Fuel specifications and classes Part 4: Graded wood chips
ISO 17225-2:2014 Solid biofuels Fuel specifications and classes Part 2: Graded wood pellets
ISO 17225-6:2014 Solid biofuels Fuel specifications and classes Part 6: Graded non-woody pellets
ISO 17225-5:2014 Solid biofuels Fuel specifications and classes Part 5: Graded firewood
EN 15316-4-7:2008 Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-7: Space heating generation systems, biomass combustion systems
EN 15270:2007 Pellet burners for small heating boilers - Definitions, requirements, testing, marking
DIN EN 15316-4-1:2008-09 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-1: SPACE HEATING AND DHW GENERATION SYSTEMS, COMBUSTION SYSTEMS (BOILERS, BIOMASS), MODULE M3-8-1, M8-8-1
S.R. CEN/TR 15316-6-4:2017 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 6-4: EXPLANATION AND JUSTIFICATION OF EN 15316-4-1, MODULE M3-8-1, M8-8-1
10/30219006 DC : 0 BS EN 14961-5 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
12/30239784 DC : 0 BS ISO 13675 - HEATING AND COOLING SYSTEMS IN BUILDINGS - METHOD AND DESIGN FOR CALCULATION OF THE SYSTEM ENERGY PERFORMANCE - COMBUSTION SYSTEMS (BOILERS)
BS ISO 13675:2013 Heating systems in buildings. Method and design for calculation of the system energy performance. Combustion systems (boilers)
BS EN 14961-4:2011 Solid biofuels. Fuel specifications and classes Wood chips for non-industrial use
UNE-EN 14961-3:2012 Solid biofuels - Fuel specifications and classes - Part 3: Wood briquettes for non-industrial use
PREN 14961-2 : DRAFT 2010 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE
DIN EN ISO 17225-7 E : 2014 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 7: GRADED NON-WOODY BRIQUETTES (ISO 17225-7:2014)
UNI EN 14961-5 : 2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
16/30298685 DC : DRAFT JAN 2016 BS EN ISO 17225-8 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 8 - THERMALLY TREATED AND DENSIFIED BIOMASS FUELS
I.S. EN 15316-4-1:2017 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-1: SPACE HEATING AND DHW GENERATION SYSTEMS, COMBUSTION SYSTEMS (BOILERS, BIOMASS), MODULE M3-8-1, M8-8-1
DIN EN ISO 17225-7:2014-09 Solid biofuels - Fuel specifications and classes - Part 7: Graded non-woody briquettes (ISO 17225-7:2014)
BS EN 14961-5:2011 Solid biofuels. Fuel specifications and classes Firewood for non-industrial use
UNI EN 14961-2 : 2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE
EN ISO 17225-6:2014 Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets (ISO 17225-6:2014)
UNE-EN 15316-4-7:2010 Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-7: Space heating generation systems, biomass combustion systems
UNE-EN ISO 17225-4:2014 Solid biofuels - Fuel specifications and classes - Part 4: Graded wood chips (ISO 17225-4:2014)

EN 15270:2007 Pellet burners for small heating boilers - Definitions, requirements, testing, marking
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 2553:2013 Welding and allied processes Symbolic representation on drawings Welded joints
IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
EN 10120:2017 Steel sheet and strip for welded gas cylinders
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
IEC 60730-2-9:2015 RLV Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
EN ISO 15614-11:2002 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)
EN ISO 228-2:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
CEN/TS 15883:2009 Residential solid fuel burning appliances - Emission test methods
ISO 7005-2:1988 Metallic flanges — Part 2: Cast iron flanges
ISO 9606-2:2004 Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
EN 61000-6-3:2007/A1:2011/AC:2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010)
ISO 13919-1:1996 Welding Electron and laser-beam welded joints Guidance on quality levels for imperfections Part 1: Steel
ISO 15614-11:2002 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 11: Electron and laser beam welding
EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
EN 14961-1:2010 Solid biofuels - Fuel specifications and classes - Part 1: General requirements
EN 304:2017 Heating boilers - Test code for heating boilers for atomizing oil burners
EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
ISO 7005-3:1988 Metallic flanges Part 3: Copper alloy and composite flanges
EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
EN ISO 4063:2010 Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01)
EN 15456:2008 Heating boilers - Electrical power consumption for heat generators - System boundaries - Measurements
EN 303-1:2017 Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
ISO 7-2:2000 Pipe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges
EN 14778:2011 Solid biofuels - Sampling
EN 13501-2:2016 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
EN 13526:2001 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method
EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
EN 10028-2:2017 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
EN ISO 13919-1:1996 Welding - Electrons and laser beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996)
IEC 61000-6-3:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
EN 13284-1:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
EN 14961-2:2011 Solid biofuels - Fuel specifications and classes - Part 2: Wood pellets for non-industrial use
EN 13384-1:2015 Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance
EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
EN 61000-6-2:2005/corrigendum:2005 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
EN 22553:1994 Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992)
EN 14961-4:2011 Solid biofuels - Fuel specifications and classes - Part 4: Wood chips for non-industrial use
EN ISO 9606-2:2004 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
ISO 857-1:1998 Welding and allied processes Vocabulary Part 1: Metal welding processes
EN 10222-2:2017 Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
EN 60335-2-102:2016 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
EN 10204:2004 Metallic products - Types of inspection documents
EN 14961-3:2011 Solid biofuels - Fuel specifications and classes - Part 3: Wood briquettes for non-industrial use
EN 12828:2012+A1:2014 Heating systems in buildings - Design for water-based heating systems
IEC 60730-2-5:2013+AMD1:2017 CSV Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
EN 1563:2011 Founding - Spheroidal graphite cast irons
EN ISO 13919-2:2001/A1:2003 WELDING - ELECTRON AND LASER BEAM WELDED JOINTS - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS - PART 2: ALUMINIUM AND ITS WELDABLE ALLOYS
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
EN 60730-2-5:2015 Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
EN 10216-1:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
EN ISO 15609-4:2009 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2009)
ISO 4063:2009 Welding and allied processes — Nomenclature of processes and reference numbers
EN 14961-5:2011 Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use
EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
EN 14792:2017 Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence
IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
ISO 857-2:2005 Welding and allied processes Vocabulary Part 2: Soldering and brazing processes and related terms
ISO 15609-4:2009 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 4: Laser beam welding
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
EN 15036-1:2006 Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators
ISO 13919-2:2001 Welding Electron and laser beam welded joints Guidance on quality levels for imperfections Part 2: Aluminium and its weldable alloys
EN 1561:2011 Founding - Grey cast irons
EN 14961-6:2012 Solid biofuels - Fuel specifications and classes - Part 6: Non-woody pellets for non-industrial use
EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.