EN 4050-1:2012
Current
Current
The latest, up-to-date edition.
Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 1: General requirements
Published date
26-09-2012
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Generality
3 Normative references
4 Method
5 Terms and definitions
6 Standard test blocks
7 Test equipment
8 Preparation of items for testing
9 Beam angle
10 Scanning modes
11 Acceptance criteria
12 Qualification and approval of personnel
13 Inspection and test report
This European Standard defines the ultrasonic inspection procedure for rolled, drawn, extruded and forged billets, bars and plates, rolled rings and forgings with a uniform square, rectangular or round cross section. It does not cover critical rotating parts in steel, titanium, titanium alloys, aluminium alloys and heat resisting alloys that are to be inspected in accordance with the technical supply conditions of the relevant EN standards or internal specifications.For products with geometries other than those described above, the test conditions and acceptance criteria shall be agreed between the manufacturer and purchaser.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 4050-1. (10/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN 4050-1 : 2013 | Identical |
| DIN EN 4050-1:2012-12 | Identical |
| PN EN 4050-1 : 2013 | Identical |
| SN EN 4050-1:2013 | Identical |
| UNE-EN 4050-1:2012 | Identical |
| NF EN 4050-1 : 2013 | Identical |
| I.S. EN 4050-1:2012 | Identical |
| NBN EN 4050-1 : 2012 | Identical |
| NEN EN 4050-1 : 2012 | Identical |
| BS EN 4050-1:2012 | Identical |
| NS EN 4050-1 : 2012 | Identical |
| 05/30129558 DC : 0 | PREN 4700-7 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 7: REMELTING STOCK |
| 05/30129551 DC : 0 | PREN 4700-5 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK |
| 14/30301152 DC : 0 | BS EN 12392 - ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| I.S. EN 4685:2011 | AEROSPACE SERIES - TITANIUM TI10V2FE3AL - BARS - D < 110 MM - R[M] >= 1240 MPA |
| PREN 12392 : DRAFT 2014 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| I.S. EN 4050-3:2012 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 3: REFERENCE BLOCKS |
| EN 12392:2016 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| 94/712749 DC : 0 | PREN 4050-4 - AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 4: ACCEPTANCE CRITERIA |
| BS EN 4050-3:2012 | Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings Reference blocks |
| NF EN 3311 : 2010 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AI-4V) - ANNEALED - BAR FOR MACHINING - D < 110 MM |
| EN 4700-002:2016 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section |
| BS EN 4685:2011 | Aerospace series. Titanium Ti10V2Fe3Al. Bars. D < 110 mm. Rm ≥ 1240 MPa |
| UNI EN 3718 : 2013 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF TUBES |
| I.S. EN 12392:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| I.S. EN 4050-4:2012 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 4: ACCEPTANCE CRITERIA |
| UNI EN 4050-3 : 2013 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 3: REFERENCE BLOCKS |
| BS EN 4050-2:2012 | Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings Performance of test |
| DIN EN 2774:2000-02 (Draft) | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4), CONSUMABLE ELECTRODE REMELTED, SOLUTION TREATED AND PRECIPITATION TREATED - BAR, A OR D = 200 MM, R(INDEX)M = 1310 MPA |
| 11/30254398 DC : 0 | BS EN 4685 - AEROSPACE SERIES - TITANIUM TI10V2FE3AL - BARS - D < 110 MM - R[M] >= 1240 MPA |
| BS EN 4700-002:2016 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section |
| UNI EN 4500-004 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS |
| DIN EN 12392:2016-08 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| EN 4050-4:2012 | Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4: Acceptance criteria |
| UNI EN 4050-4 : 2013 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 4: ACCEPTANCE CRITERIA |
| 02/708860 DC : 0 | PREN 4800-1 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 1: PLATE, SHEET AND STRIP |
| I.S. EN 4700-002:2016 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| 11/30253929 DC : 0 | BS EN 4820 - AEROSPACE SERIES - COPPER AND COPPER ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION |
| BS EN 4050-4:2012 | Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings Acceptance criteria |
| 04/30050376 DC : DRAFT AUG 2004 | EN 13981-4 - ALUMINIUM AND ALUMINIUM ALLOYS - PRODUCTS FOR STRUCTURAL RAILWAY APPLICATIONS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY - PART 4: FORGINGS |
| UNE-EN 3718:2012 | Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes |
| 05/30129555 DC : 0 | PREN 4700-6 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| UNI EN 4050-2 : 2013 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 2: PERFORMANCE OF TEST |
| BS EN 12392:2016 | Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment |
| EN 4050-3:2012 | Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 3: Reference blocks |
| EN 4685:2011 | Aerospace series - Titanium Ti10V2Fe3Al - Bars - D < 110 mm - Rm ≥ 1 240 MPa |
| EN 4050-2:2012 | Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 2: Performance of test |
| I.S. EN 4050-2:2012 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 2: PERFORMANCE OF TEST |
| PREN 4700-002 : 200P3 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| ASD-STAN prEN 4500-004 P3:2023 | Aerospace series Metallic materials — Rules for drafting and presentation of material standards — Part 004: Specific rules for titanium and titanium alloys |
| EN 4050-3:2012 | Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 3: Reference blocks |
| EN 4050-4:2012 | Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4: Acceptance criteria |
| EN 2000:1991 | Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers |
| EN 4179:2017 | Aerospace series - Qualification and approval of personnel for non-destructive testing |
| EN 4050-2:2012 | Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 2: Performance of test |
| EN 2078:2001 | Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.