EN 4689:2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Aerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application
Superseded date
23-01-2021
Superseded by
Published date
21-03-2012
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Surface pretreatments
5 Classification
6 Batch release and qualification testing
7 Requirements for fibre reinforced composites
8 Designation
This European Standard specifies the requirements for a two components flexible polyurethane top coat to beapplied over EN 4687 and/or EN 4688 primers mainly for exterior aerospace applications.The primer and the finish tested to this specification will be from the same manufacturer applied in accordancewith (i.a.w.) their instruction / Table 1.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 4689. (04/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 4689 : 2012 | Identical |
| NF EN 4689 : 2012 | Identical |
| UNE-EN 4689:2012 | Identical |
| NEN EN 4689 : 2012 | Identical |
| I.S. EN 4689:2012 | Identical |
| DIN EN 4689:2012-08 | Identical |
| SN EN 4689 : 2012 | Identical |
| UNI EN 4689 : 2013 | Identical |
| NBN EN 4689 : 2012 | Identical |
| NS EN 4689 : 2012 | Identical |
| PN EN 4689 : 2012 | Identical |
| BS EN 4689:2012 | Identical |
| I.S. EN 4688:2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| 17/30371343 DC : 0 | BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| BS EN 4687:2012 | Aerospace series. Paints and varnishes. Chromate free non corrosion inhibiting two components cold curing primer for military application |
| 17/30371341 DC : 0 | PREN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMATE FREE PRIMER FOR MILITARY APPLICATION |
| I.S. EN 4687:2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| UNI EN 4688 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| UNI EN 4687 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| EN 4687:2012 | Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application |
| EN 4688:2012 | Aerospace series - Paints and varnishes - Corrosion inhibiting two components cold curing primer for military application |
| BS EN 4688:2012 | Aerospace series. Paints and varnishes. Corrosion inhibiting two components cold curing primer for military application |
| PREN 4476 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| ISO 7724-1:1984 | Paints and varnishes Colorimetry Part 1: Principles |
| EN 2334:1997 | Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys |
| EN ISO 4628-2:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
| MIL-PRF-6081 Revision E:2014 | Lubricating Oil, Jet Engine |
| PREN 3212 : 1993 | PAINTS AND VARNISHES - CORROSION TEST BY ALTERNATE IMMERSION IN A BUFFERED SODIUM CHLORIDE SOLUTION |
| EN ISO 4628-8:2012 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012) |
| PREN 3847 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SEDIMENTATION RATING |
| EN 3212:1995 | Aerospace series - Paints and varnishes - Corrosion test by alternate immersion in a buffered sodium chloride solution |
| EN ISO 2431:2011 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
| EN 4687:2012 | Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| EN ISO 1524:2013 | Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2013) |
| SAE AMS 1527 : 2014 | CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, FOAM-ON, PRESSURE-SPRAYING |
| EN ISO 2811-2:2011 | Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
| ISO 7724-2:1984 | Paints and varnishes Colorimetry Part 2: Colour measurement |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN 4688:2012 | Aerospace series - Paints and varnishes - Corrosion inhibiting two components cold curing primer for military application |
| DEFSTAN 68-10/5(2003) : 2003 | CORROSION PREVENTIVE: WATER DISPLACING NATO CODE: C-634 JOINT SERVICE DESIGNATION: PX-24 |
| EN 2436-006:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application |
| EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
| EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
| EN ISO 9514:2005 | Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005) |
| EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
| EN 2437:2001 | Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys |
| EN ISO 2811-3:2011 | Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011) |
| BS 1595-1:1986 | Propan-2-ol (isopropyl alcohol) for industrial use Specification for propan-2-ol (isopropyl alcohol) |
| EN ISO 1513:2010 | Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
| ISO 7724-3:1984 | Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| EN ISO 3680:2004 | Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004) |
| EN ISO 9117-1:2009 | Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009) |
| PREN 4160 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - PAINTS AND VARNISHES - TEST METHODS - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE |
| EN 2101:1991 | Aerospace series - Chromic acid anodizing of aluminium and wrought aluminium alloys |
| MIL-DTL-83133 Revision J:2015 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
| EN ISO 2811-4:2011 | Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011) |
| EN ISO 1520:2006 | Paints and varnishes - Cupping test (ISO 1520:2006) |
| EN ISO 11890-1:2007 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
| EN ISO 1519:2011 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
| EN ISO 3679:2015 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| SAE AMS1533B | Cleaner for Exterior Aircraft Surfaces Gel-Type, Solvent-Base |
| EN ISO 1518:2000 | Paints and varnishes - Scratch test (ISO 1518:1992) |
| EN ISO 11909:2007 | Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) |
| PREN 6042 : 200P1 | AEROSPACE SERIES - ORGANIC COMPOUNDS - TEST METHOD - ANALYSIS BY INFRARED SPECTROSCOPY |
| EN ISO 3678:1995 | Paints and varnishes - Print-free test (ISO 3678:1976) |
| STANAG 4477 : 0 | SPECIFICATION FOR PAINTS AND PAINT SYSTEMS, RESISTANT TO CHEMICAL AGENTS AND DECONTAMINANTS, FOR THE PROTECTION OF AEROSPACE MILITARY EQUIPMENT |
| EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
| EN ISO 2813:2014 | Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
| EN ISO 9117-3:2010 | Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010) |
| EN ISO 11507:2007 | Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water (ISO 11507:2007) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.