EN 4826:2014
Current
The latest, up-to-date edition.
Aerospace series - Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength ≤ 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners
17-12-2014
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Purpose of process
5 Applicability and limitations of the process
6 Coating system classification
7 Requirements
8 Quality requirements
9 Designation
This European Standard specifies the plating of a Zinc-Nickel (12 % to 16 %) alloy on mechanical parts and fasteners in steels (Rm ≤ 1 450 MPa), stainless steels (Rm ≤ 1 450 MPa), copper alloys, nickel alloys and aluminium alloys (not applicable for electrical components), as well as the passivation and lubricant finishing that can be associated to them. The Zinc-Nickel process is an electrolytic plating process under controlled current allowing to deposit a Zinc-Nickel layer from, most often, an alkaline electrolyte. Alkaline Zinc-Nickel is only considered in this standard.The purpose of this standard is to give technical and quality requirements of Zinc-Nickel plating. It doesn’t give complete in-house process instructions, these shall be given in the manufacturers detailed process instructions.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 4826. (12/2014)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NS EN 4826 : 2014 | Identical |
| BS EN 4826:2014 | Identical |
| PN EN 4826 : 2015 | Identical |
| DIN EN 4826:2015-03 | Identical |
| NEN EN 4826 : 2015 | Identical |
| NBN EN 4826 : 2015 | Identical |
| I.S. EN 4826:2014 | Identical |
| NF EN 4826 : 2018 | Identical |
| UNE-EN 4826:2014 | Identical |
| 17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
| PREN 4854-2 : 200P1 | AEROSPACE SERIES - BEARING, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS - PART 2: DIMENSIONS AND LOADS FOR WIDE SERIES |
| PREN 4854-1 : 200P1 | AEROSPACE SERIES - BEARING, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS - PART 1: DIMENSIONS AND LOADS FOR NARROW SERIES |
| EN 9100:2009 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
| EN 4473:2010 | Aerospace series - Aluminium pigmented coatings for fasteners - Technical specification |
| EN 2832:1993 | Aerospace series - Hydrogen embrittlement of steels - Notched specimen test |
| EN ISO 1463:2004 | Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003) |
| EN ISO 3497:2000 | Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000) |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| ISO 1463:2003 | Metallic and oxide coatings — Measurement of coating thickness — Microscopical method |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| ISO 2819:1980 | Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion |
| ISO 3497:2000 | Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 2409:2013 | Paints and varnishes — Cross-cut test |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.