EN 50173 : 95 AMD 1 2000
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS
Superseded date
01-11-2002
Superseded by
Published date
28-01-2000
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope and conformance
1.1 Scope
1.2 Conformance
2 Normative references
3 Definitions and abbreviations
3.1 Definitions
3.2 Abbreviations
4 Structure of the generic cabling
system
4.1 General
4.2 Structure
4.3 Overall structure
4.4 Location of distributors
4.5 Interfaces to the generic cabling
system
4.6 Dimensioning and configuring
4.7 Electromagnetic compatibility
4.8 Earthing and bonding
5 Implementation
5.1 General
5.2 Horizontal cabling
5.3 Backbone cabling
6 Permanent link and channel specifications
6.1 Permanent links and channels
6.2 Classification of applications,
links and channels
6.3 Balanced permanent links and channels
6.4 Optical fibre permanent links and
channels
7 Cable requirements
7.1 General
7.2 Balanced cables
7.3 Additional crosstalk considerations
for balanced cables
7.4 Multimode optical fibre cables
7.5 Singlemode optical fibre cables
8 Connecting hardware requirements
8.1 General requirements
8.2 Connecting hardware for 100 n and
120 n cabling
8.3 Connecting hardware for 150 n cabling
8.4 Optical fibre connecting hardware
9 Screening practice
9.1 General
9.2 Electromagnetic compatibility
9.3 Grounding
10 Administration
10.1 General
10.2 Scope of administration
10.3 Identifiers
10.4 Records and documentation
Annexes
A (informative) Link performance test
procedures
A.1 General
A.2 Testing balanced cabling links
A.3 Testing optical fibre cabling links
A.4 Link tests
B (normative) Testing of connecting hardware
for balanced cabling
B.1 Transmission testing of connecting
hardware for balanced cabling
B.2 Termination procedure and set-up
verification for modular jack and
plug testing
B.3 Reliability testing of connecting
hardware for balanced cabling
C (normative) Requirements for flexible
100 n, 120 n and 150 n balanced cables
D (informative) Topology
D.1 Common topologies
D.2 Configurations
D.3 Application of the structured framework
E (informative) Tutorial on link performance
E.1 Balanced cable transmission
E.2 Optical cabling
F (informative) Supported applications
G (informative) Optical fibre
connectivity planning guide
G.1 Introduction
G.2 General recommendations
G.3 Connectivity options at the
telecommunications outlet
G.4 Connectivity options at distributors
H (informative) Bibliography
Specifies generic cabling for use within commercial premises that may comprise single or multiple buildings on a campus. Covers balances copper cabling and optical fibre cabling. Specifies the structure and minimum configuration for generic cabling; implementation requirements; conformance requirements and verification procedures; performance requirements for individual cabling links.
| Committee |
TC 215
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| I.S. EN 50173:1997 | Identical |
| NBN EN 50173 : 96 AMD 1 2000 | Identical |
| BS EN 50173:1996 | Identical |
| SN EN 50173 : 1995 AMD 1 2000 | Identical |
| CEI EN 50173 : 1997 AMD 1 2000 | Identical |
| NS EN 50173 : 95 AMD 1 2000 | Identical |
| NEN EN 50173 : 95 C1 2000 | Identical |
| NF EN 50173 : 97 AMD 1 2000 | Identical |
| DIN EN 50173:2000-07 | Identical |
| BS EN 50377-9-1:2003 | Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MT-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| 11/30255247 DC : DRAFT NOV 2011 | BS EN 50288-3-1 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 3-1: SECTIONAL SPECIFICATION FOR UNSCREENED CABLES CHARACTERISED UP TO 100 MHZ - HORIZONTAL AND BUILDING BACKBONE CABLES |
| 11/30255268 DC : 0 | BS EN 50288-5-2 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 5-2: SECTIONAL SPECIFICATION FOR SCREENED CABLES CHARACTERIZED UP TO 250 MHZ - WORK AREA AND PATCH CORD CABLES |
| 02/209113 DC : DRAFT SEP 2002 | PREN 50288-2-2 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 2-2: SECTIONAL SPECIFICATION FOR SCREENED CABLES CHARACTERISED UP TO 100 MHZ - WORK AREA AND PATCH CORD CABLES |
| 11/30255255 DC : DRAFT NOV 2011 | BS EN 50288-4-1 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 4-1: SECTIONAL SPECIFICATION FOR SCREENED CABLES CHARACTERISED UP TO 600 MHZ - HORIZONTAL AND BUILDING BACKBONE CABLES |
| 11/30255251 DC : DRAFT NOV 2011 | BS EN 50288-3-2 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 3-2: SECTIONAL SPECIFICATION FOR UNSCREENED CABLES CHARACTERIZED UP TO 100 MHZ - WORK AREA AND PATCH CORD CABLES |
| 11/30255243 DC : 0 | BS EN 50288-2-2 - MULTI-ELEMENT METALIC CABLES USED IN ANALOUGE AND DIGITAL COMUNICATION AND CONTROL - PART 2-2: SECTIONAL SPECIFICATION FOR SCREENED CABLES CHARACTERISED UP TO 100 MHZ - WORK AREA AND PATCH CORD CABLES |
| BS EN 50289-1-15:2004 | Communication cables. Specifications for test methods Electromagnetic performance - Coupling attenuation of links and channels (laboratory conditions) |
| NF EN 50377-15-1 : 2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
| 11/30255276 DC : 0 | BS EN 50288-6-2 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 6-2: SECTIONAL SPECIFICATION FOR UNSCREENED CABLES CHARACTERISED UP TO 250 MHZ - WORK AREA AND PATCH CORD CABLES |
| 07/30163785 DC : 0 | BS EN 50377-3-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C |
| TR 105 174-1-1 : 1.1.1 | ACCESS AND TERMINALS (AT); RELATIONSHIP BETWEEN INSTALLATIONS, CABLING AND COMMUNICATIONS SYSTEMS; STANDARDIZATION WORK PUBLISHED AND IN DEVELOPMENT; PART 1: OVERVIEW, COMMON AND GENERIC ASPECTS; SUB-PART 1: GENERALITIES, COMMON VIEW OF THE SET OF DOCUMENTS |
| 03/306557 DC : DRAFT MAY 2003 | EN 50289-1-15 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-15: ELECTROMAGNETIC PERFORMANCE - COUPLING ATTENUATION OF CABLE ASSEMBLIES (LABORATORY CONDITIONS) |
| 03/311586 DC : DRAFT JULY 2003 | EN 50377-6-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 6-2: TYPE SC-RJ TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| I.S. EN 50377-7-1:2004 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-1: TYPE LC-PC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY A1A AND A1B MULTIMODE FIBRE |
| CEI EN 50377-3-1 : 2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C |
| BS EN 50377-3-1:2008 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SG terminated on IEC 60793-2-10 category A1a, A1b or equivalent multimode fibre for category C |
| EN 50098-2:1996 | Customer premises cabling for Information Technology - Part 2: 2048 kbit/s ISDN primary access and leased line network interface |
| EN 50377-7-1:2004 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-1: Type LC-PC duplex terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| EN 60512-25-9 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 25-9: SIGNAL INTEGRITY TESTS - TEST 25I: ALIEN CROSSTALK |
| EN 50377-9-2:2004 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 9-2: Type MT-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre |
| EN 50377-5-1:2003 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 5-1: Type EC terminated on IEC 60793-2 category B1.1 singlemode fibre |
| NF EN 61935-1 : 2010 | SPECIFICATION FOR THE TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY CABLING - PART 1: INSTALLED BALANCED CABLING AS SPECIFIED IN THE STANDARDS SERIES EN 50173 |
| BS EN 50377-5-1:2003 | Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type EC terminated on IEC 60793-2 category B.1.1 singlemode fibre |
| 02/210340 DC : DRAFT JAN 2003 | EN 50377-9-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 9-2: TYPE MT-RJ TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| PREN 50288-1 : DRAFT 2011 | MULTI-ELEMENT METALLIC CABLES USE IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
| BS EN 50411-3-8:2016 | Fibre organizers and closures to be used in optical fibre communication systems. Product specifications Fibre management system, terminal equipment box type 1 for category C |
| BS EN 50377-9-2:2004 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MT-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre |
| 02/209112 DC : DRAFT SEP 2002 | PREN 50288-2-1 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 2-1: SECTIONAL SPECIFICATION FOR SCREENED CABLES CHARACTERISED UP TO 100 MHZ - HORIZONTAL AND BUILDING BACKBONE CABLES |
| 11/30255259 DC : DRAFT NOV 2011 | BS EN 50288-4-2 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 4-2: SECTIONAL SPECIFICATION FOR SCREENED CABLES CHARACTERISED UP TO 600 MHZ - WORK AREA AND PATCH CORD CABLES |
| 02/210338 DC : DRAFT JAN 2003 | EN 50377-7-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-1: TYPE LC-PC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY A1A AND A1B MULTIMODE FIBRE |
| PREN 50288-5-2 : DRAFT 2011 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 5-2: SECTIONAL SPECIFICATION FOR SCREENED CABLES CHARACTERIZED UP TO 250 MHZ - WORK AREA AND PATCH CORD CABLES |
| 17/30350080 DC : 0 | BS EN 50441-5 - CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 5: CABLES UP TO 2200 MHZ FOR ONE PAIR AND REMAINING PAIRS UP TO 1000 MHZ |
| 08/30185105 DC : DRAFT JULY 2008 | BS EN 50377-15-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
| 08/30165949 DC : DRAFT JULY 2008 | BS EN 50288-8 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 8: SPECIFICATION FOR TYPE 1 CABLES CHARACTERISED UP TO 2 MHZ |
| 02/209116 DC : DRAFT SEP 2002 | PREN 50288-3-2 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 3-2: SECTIONAL SPECIFICATION FOR UNSCREENED CABLES CHARACTERISED UP TO 100 MHZ - WORK AREA AND PATCH CORD CABLES |
| VDI 2050 Blatt 5:2010-10 | Requirements at technical equipment rooms - Electrical engineering |
| PREN 50288-6-2 : DRAFT 2011 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 6-2: SECTIONAL SPECIFICATION FOR UNSCREENED CABLES CHARACTERISED UP TO 250 MHZ - WORK AREA AND PATCH CORD CABLES |
| 03/300672 DC : DRAFT JAN 2003 | BS EN 50090 - HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 4-1: MEDIA INDEPENDENT LAYERS - APPLICATION LAYER FOR HBES CLASS 1 |
| 05/30128960 DC : 0 | EN 50377-4-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-1: TYPE SC-PC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY A 1 A AND A L B MULTIMODE FIBRE |
| 02/209107 DC : DRAFT SEP 2002 | PREN 50288-4-2 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 4-2: SECTIONAL SPECIFICATION FOR SCREENED CABLES CHARACTERISED UP TO 600 MHZ - WORK AREA AND PATCH CORD CABLES |
| I.S. EN 50377-9-1:2003 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 9-1: TYPE MT-RJ TERMINATED ON IEC 60793-2 CATEGORY A1A AND A1B MULTIMODE FIBRE |
| 11/30255239 DC : 0 | BS EN 50288-2-1 - MULTI-ELEMENT METALIC CABLES USED IN ANALOUGE AND DIGITAL COMUNICATION AND CONTROL - PART 2-1: SECTIONAL SPECIFICATION FOR SCREENED CABLES CHARACTERISED UP TO 100 MHZ - HORIZONTAL AND BUILDING BACKBONE CABLES |
| EG 202 306 : 1.2.1 | TRANSMISSION AND MULTIPLEXING (TM); ACCESS NETWORKS FOR RESIDENTIAL CUSTOMERS |
| CLC/TR 50090-9-2:2007 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-2: INSTALLATION REQUIREMENTS - INSPECTION AND TESTING OF HBES INSTALLATION |
| 02/209111 DC : DRAFT SEP 2002 | PREN 50288-1 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
| BS EN 50377-6-1:2002 | Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SC-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| 07/30152812 DC : DRAFT AUG 2007 | BS EN 50174-2 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
| PREN 50441-5 : DRAFT 2017 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 5: CABLES UP TO 2200 MHZ FOR ONE PAIR AND REMAINING PAIRS UP TO 1000 MHZ |
| EN 50377-9-1:2003 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 9-1: Type MT-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| I.S. EN 50377-9-2:2004 | CONNECTORS SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS; PART 9-2: TYPE MT-RJ TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| 11/30255235 DC : 0 | BS EN 50288-1 - MULTI-ELEMENT METALIC CABLES USED IN ANALOUGE AND DIGITAL COMUNICATION AND CONTROL - PART 1: GENEIC SPECIFICATION |
| 04/30111643 DC : DRAFT MARCH 2004 | EN 14908-2 - OPEN DATA COMMUNICATION IN BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT - BUILDING NETWORK PROTOCOL - PART 2 - TWISTED PAIR COMMUNICATION |
| PREN 50288-2-2 : DRAFT 2011 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 2-2: SECTIONAL SPECIFICATION FOR SCREENED CABLES CHARACTERISED UP TO 100 MHZ - WORK AREA AND PATCH CORD CABLES |
| PREN 50288-5-1 : DRAFT 2011 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 5-1: SECTIONAL SPECIFICATION FOR SCREENED CABLES CHARACTERIZED UP TO 250 MHZ - HORIZONTAL AND BUILDING BACKBONE CABLES |
| 02/209117 DC : DRAFT SEP 2002 | PREN 50288-4-1 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 4-1: SECTIONAL SPECIFICATION FOR SCREENED CABLES CHARACTERISED UP TO 600 MHZ - HORIZONTAL AND BUILDING BACKBONE CABLES |
| PREN 50288-2-1 : DRAFT 2011 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 2-1: SECTIONAL SPECIFICATION FOR SCREENED CABLES CHARACTERISED UP TO 100 MHZ - HORIZONTAL AND BUILDING BACKBONE CABLES |
| 11/30255272 DC : 0 | BS EN 50288-6-1 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 6-1: SECTIONAL SPECIFICATION FOR UNSCREENED CABLES CHARACTERISED UP TO 250 MHZ - HORIZONTAL AND BUILDING BACKBONE CABLES |
| 02/209108 DC : DRAFT SEP 2002 | PREN 50288-6-1 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 6-1: SECTIONAL SPECIFICATION FOR UNSCREENED CABLES CHARACTERISED UP TO 250 MHZ - HORIZONTAL AND BUILDING BACKBONE CABLES |
| 02/209115 DC : DRAFT SEP 2002 | PREN 50288-5-1 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 5-1: SECTIONAL SPECIFICATION FOR SCREENED CABLES CHARACTERIZED UP TO 250 MHZ - HORIZONTAL AND BUILDING BACKBONE CABLES |
| PREN 50288-6-1 : DRAFT 2011 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 6-1: SECTIONAL SPECIFICATION FOR UNSCREENED CABLES CHARACTERISED UP TO 250 MHZ - HORIZONTAL AND BUILDING BACKBONE CABLES |
| 05/30133440 DC : DRAFT MAY 2005 | EN 50310 ED 2 - APPLICATION OF EQUIPOTENTIAL BONDING AND EARTHING IN BUILDINGS WITH INFORMATION TECHNOLOGY EQUIPMENT |
| I.S. EN 50377-5-1:2003 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 5-1: TYPE EC TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| CEI CLC/TR 50090-9-2 : 2009 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-2: INSTALLATION REQUIREMENTS - INSPECTION AND TESTING OF HBES INSTALLATION |
| CEI EN 50098-2 : 1997 | CUSTOMER PREMISES CABLING FOR INFORMATION TECHNOLOGY - PART 2: 2048 KBIT/S ISDN PRIMARY ACCESS AND LEASED LINE NETWORK INTERFACE |
| I.S. EN 50289-1-15:2004 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-15: ELECTROMAGNETIC PERFORMANCE - COUPLING ATTENUATION OF LINKS AND CHANNELS (LABORATORY CONDITIONS) |
| 11/30255263 DC : 0 | BS EN 50288-5-1 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 5-1: SECTIONAL SPECIFICATION FOR SCREENED CABLES CHARACTERIZED UP TO 250 MHZ - HORIZONTAL AND BUILDING BACKBONE CABLES |
| BS EN 50377-7-1:2004 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LC-PC duplex terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| 07/30154013 DC : 0 | EN 50290-2-4 - COMMUNICATION CABLES - PART 4-2: GENERAL CONSIDERATIONS FOR THE USE OF CABLES - GUIDE FOR USE |
| 02/209114 DC : DRAFT SEP 2002 | PREN 50288-3-1 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 3-1: SECTIONAL SPECIFICATION FOR UNSCREENED CABLES CHARACTERISED UP TO 100 MHZ - HORIZONTAL AND BUILDING BACKBONE CABLES |
| 02/637047 DC : DRAFT APR 2002 | BS EN 50174-3 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| I.S. TR 50090-9-2:2007 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-2: INSTALLATION REQUIREMENTS - INSPECTION AND TESTING OF HBES INSTALLATION |
| I.S. EN 50377-6-1:2002 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 6-1: TYPE SC-RJ TERMINATED ON IEC 60793-2 CATEGORY A1A AND A1B MULTIMODE FIBRE |
| I.S. EN 50377-3-1:2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C |
| EN 50377-6-1:2002 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 6-1: Type SC-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| EN 50377-3-1:2008 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 3-1: Type SG terminated on IEC 60793-2-10 category A1a, A1b or equivalent multimode fibre for category C |
| EN 50289-1-15:2004 | Communication cables - Specifications for test methods - Part 1-15: Electromagnetic performance - Coupling attenuation of links and channels (Laboratory conditions) |
| IEC 60874-10:1992 | Connectors for optical fibres and cables - Part 10: Sectional specification - Fibre optic connector type BFOC/2,5 |
| EN 50081-1:1992 | Electromagnetic compatibility - Generic emission standard - Part 1: Residential, commercial and light industry |
| EN 55024 : 2010 AMD 1 2015 | INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 24:2010/A1:2015) |
| EN 50174-1:2009/A2:2014 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE |
| EN 61935-1:2009 | SPECIFICATION FOR THE TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY CABLING - PART 1: INSTALLED BALANCED CABLING AS SPECIFIED IN THE STANDARDS SERIES EN 50173 |
| IEC 60189-1:2007 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods |
| IEC 60068-2-60:2015 RLV | Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test |
| IEC 60793-2:2015 | Optical fibres - Part 2: Product specifications - General |
| EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| EN 50289-1-6:2002 | Communication cables - Specifications for test methods - Part 1-6: Electrical test methods - Electromagnetic performance |
| EN 60794-3:2015 | Optical fibre cables - Part 3: Sectional specification - Outdoor cables |
| HD 608 : 200S1 | GENERIC SPECIFICATION FOR SYMMETRIC PAIR/QUAD AND MULTICORE CABLES FOR DIGITAL COMMUNICATION |
| EN 187000 : 92 AMD 1 95 | GENERIC SPECIFICATION: OPTICAL FIBRE CABLES |
| HD 323.2.14 : 200S2 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST N: OF TEMPERATURE |
| EN 188000 : 1992 | GENERIC SPECIFICATION FOR OPTICAL FIBRES |
| EN 50289-1-9:2017 | Communication cables - Specifications for test methods - Part 1-9: Electrical test methods - Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL) |
| EN 187000 : 92 AMD 1 95 | GENERIC SPECIFICATION: OPTICAL FIBRE CABLES |
| EN 55022:2010/AC:2011 | INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008) |
| EN 60068-2-38:2009 | Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test |
| IEC 61073-1:2009 | Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification |
| EN 60603-7:2009/A1:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008/A1:2011) |
| IEC 60874-14:1993 | Connectors for optical fibres and cables - Part 14: Sectional specification for fibre optic connector - Type SC |
| EN 188201:1995 | Family Specification: A1a graded index multimode optical fibres |
| HD 384.5.54 : 200S1 | ELECTRICAL INSTALLATION OF BUILDINGS - SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| IEC 60794-2:2017 | Optical fibre cables - Part 2: Indoor cables - Sectional specification |
| EN 60825-2:2004/A2:2010 | SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS) |
| EN 188100:1995 | Sectional Specification: Single-mode (SM) optical fibre |
| EN 188101:1995 | Family Specification: Single-mode dispersion unshifted (B1.1) optical fibre |
| IEC 60807-8:1992 | Rectangular connectors for frequencies below 3 MHz - Part 8: Detail specification for connectors, four-signal contacts and earthing contacts for cable screen |
| EN 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| EN 188202:1995 | Family Specification: A1b graded index multimode optical fibres |
| EN 60811-1-1:1995/A1:2001 | INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - GENERAL APPLICATION - MEASUREMENT OF THICKNESS AND OVERALL DIMENSIONS - TESTS FOR DETERMINING MECHANICAL PROPERTIES |
| EN 50082-1:1997 | Electromagnetic compatibility - Generic immunity standard - Part 1: Residential, commercial and light industry |
| HD 323.2.38 : 200S1 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TESTS Z/AD: COMPOSITE TEMPERATURE/HUMIDITY CYCLIC TEST |
| EN 186000-1 : 1993 | GENERIC SPECIFICATION: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - REQUIREMENTS, TEST METHODS AND QUALIFICATION APPROVAL PROCEDURES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.