![header thumbnail](/images/img-default-logo.png)
EN 515:2017
Current
The latest, up-to-date edition.
![header thumbnail](/images/img-default-logo.png)
Aluminium and aluminium alloys - Wrought products - Temper designations
08-03-2017
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Basis of codification
5 Basic temper designations
6 Subdivision of O (annealed) temper
designations
7 Subdivision of H (strain-hardened)
temper designations
8 Subdivision of T (thermally treated to
produce stable tempers other than
F, O or H) temper designations
9 Summary
Annex A (informative) - Recommendations for
further T tempers extensions
Bibliography
This European Standard establishes temper designations for all forms of wrought aluminium and aluminium alloys and for continuously cast aluminium and aluminium alloys drawing stock and strip intended to be wrought.NOTESome of these temper designations may be subject of patent or patent applications and their listing herein is not to be construed in any way as the granting of a license under such patent right.Additional temper designations, conforming to this standard, may be standardized with CEN/TC 132 and AECMA/5 provided:-the temper is used or is available for use by more than one user;-mechanical property limits are defined;-the characteristics of the temper are significantly different from those of all other tempers which have the same sequence of basic treatments and for which designations already have been assigned for the same alloy and product;-the following are also defined if characteristics other than mechanical properties are considered significant:a)test methods and limits for the characteristics; orb)the specific practices used to produce the temper.
DevelopmentNote |
Supersedes PREN 515. (03/2017)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
UNI EN 515:2017 | Identical |
UNI EN 515 : 1996 | Identical |
UNE-EN 515:2017 | Identical |
NEN EN 515 : 2017 | Identical |
DIN EN 515:2016-01 (Draft) | Identical |
I.S. EN 515:2017 | Identical |
SNV DIN EN 515 : 1993 | Identical |
NBN EN 515 : 1993 | Identical |
PN EN 515 : 2017 | Identical |
NS EN 515 : 2017 | Identical |
NF EN 515 : 2017 | Identical |
BS EN 515:2017 | Identical |
SN EN 515 : 2017 | Identical |
DIN EN 515:2017-05 | Identical |
UNE-EN 13195:2014 | Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
UNI EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
00/705877 DC : 0 | PREN 4400-3 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 3: BAR AND SECTION |
06/30150284 DC : 0 | EN 1715-4 - ALUMINIUM AND ALUMINIUM ALLOYS - DRAWING STOCK - PART 4: SPECIFIC REQUIREMENTS FOR WELDING APPLICATIONS |
I.S. EN ISO 15614-2:2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
10/30228108 DC : 0 | BS EN 4400-9 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOYS - TECHNICAL SPECIFICATION - PART 9: PRE-PRODUCTION AND PRODUCTION CASTINGS |
06/30136505 DC : 0 | EN 754-1 - ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
17/30348213 DC : 0 | BS ISO 19426-4 - STRUCTURES FOR MINE SHAFTS - PART 4: CONVEYANCES |
UNE-EN 16851:2017 | Cranes - Light crane systems |
01/713948 DC : 0 | PREN 4400-6 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 6: FORGING STOCK |
05/30128370 DC : DRAFT JAN 2005 | EN 683-1 - ALUMINIUM AND ALUMINIUM ALLOYS - FINSTOCK - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
DIN EN 13195:2013-12 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
06/30143946 DC : 0 | EN 485-1 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
DD ENV 1999-1.1 : DRAFT DEC 2000 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 101: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
05/30128379 DC : DRAFT JAN 2005 | EN 546-1 - ALUMINIUM AND ALUMINIUM ALLOYS - FOIL - PART 1: TECHNICAL CONDITIONS FOR ON AND DELIVERY |
06/30146290 DC : 0 | EN 4632-2 - AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 2: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS |
98/105109 DC : DRAFT JUNE 1998 | PREN 1317-5 - ROAD RESTRAINT SYSTEMS - PART 5: DURABILITY AND EVALUATION OF CONFORMITY |
PREN 4400-6 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOYS - TECHNICAL SPECIFICATION - PART 6: ALUMINIUM ALLOY FORGING STOCK |
PREN 4400-4 : DRAFT 2003 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOYS - TECHNICAL SPECIFICATION - PART 4: ALUMINIUM AND ALUMINIUM ALLOY TUBE |
S.R. CR 12172:1995 | NUMERICAL DESIGNATION SYSTEMS OF METALLIC MATERIALS - REVIEW OF EXISTING SYSTEMS AND RECOMMENDATION FOR NEW SYSTEMS |
ONORM EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
EN 755-2:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
I.S. EN 508-2:2008 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELFSUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
DIN EN 13411-3 E : 2011 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 3: FERRULES AND FERRULE-SECURING |
DIN EN 754-8:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 8: PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM |
DIN EN 13981-1:2003-11 | ALUMINIUM AND ALUMINIUM ALLOYS - PRODUCTS FOR STRUCTURAL RAILWAY APPLICATIONS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY - PART 1: EXTRUDED PRODUCTS |
DIN EN 546-2:2007-03 | ALUMINIUM AND ALUMINIUM ALLOYS - FOIL - PART 2: MECHANICAL PROPERTIES |
DIN EN 1396:2015-06 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
DIN EN 754-6:2008-06 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form |
DIN EN 586-2:1994-11 | ALUMINIUM AND ALUMINIUM ALLOYS - FORGINGS - PART 2: MECHANICAL PROPERTIES AND ADDITIONAL PROPERTY REQUIREMENTS |
DIN EN 683-2:2007-03 | Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties |
BS EN 1301-1:2008 | Aluminium and aluminium alloys. Drawn wire Technical conditions for inspection and delivery |
BS EN 1715-3:2008 | Aluminium and aluminium alloys. Drawing stock Specific requirements for mechanical uses (excluding welding) |
BS EN 13958:2008 | Aluminium and aluminium alloys. Cold drawn, round, coiled tube for general applications. Specification |
BS EN 546-2:2006 | Aluminium and aluminium alloys. Foil Mechanical properties |
BS EN 12482-1:1998 | Aluminium and aluminium alloys. Reroll stock for general applications Specifications for hot rolled reroll stock |
BS EN 586-2:1994 | Aluminium and aluminium alloys. Forgings Mechanical properties and additional property requirements |
BS EN 13981-4:2006 | Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Forgings |
BS EN 754-1:2016 | Aluminium and aluminium alloys. Cold drawn rod/bar and tube Technical conditions for inspection and delivery |
BS EN 851:2014 | Aluminium and aluminium alloys. Circle and circle stock for the production of culinary utensils. Specifications |
BS EN 1715-4:1998 | Aluminium and aluminium alloys. Drawing stock Specific requirements for welding applications |
BS EN 1715-2:1998 | Aluminium and aluminium alloys. Drawing stock Specific requirements for electrical applications |
BS EN 1592-1:1998 | Aluminium and aluminium alloys. HF seam welded tubes Technical conditions for inspection and delivery |
BS EN 755-2:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Mechanical properties |
DIN EN 13958:2009-01 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN, ROUND, COILED TUBE FOR GENERAL APPLICATIONS - SPECIFICATION |
DIN EN 508-2:2009-07 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
EN 12482-1:1998 | Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock |
EN 1160 : 1996 | INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - GENERAL CHARACTERISTICS OF LIQUEFIED NATURAL GAS |
EN 12487:2007/AC:2008 | CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS |
EN 13195:2013 | Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
CEN/TR 17144:2017 | Resistance of metallic materials to liquid biogenic and alternative fuels and their blends |
EN 13411-3:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing |
EN 13958:2008 | Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification |
EN 13195-1 : 2002 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS |
DIN EN 13195-1:2002-11 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS |
NFL 06 383 : A2006 | WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - RESISTANCE SPOT OR SEAM WELDED ASSEMBLIES - QUALITY OF WELDED ASSEMBLIES |
PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
UNI EN 13195 : 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
XP PREN 4500-2 : 1997 XP | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 2: SPECIFIC RULES FOR ALUMINIUM, ALUMINIUM ALLOYS AND MAGNESIUM ALLOYS |
I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
PREN 755-2 : DRAFT 2015 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 2: MECHANICAL PROPERTIES |
13/30286946 DC : 0 | BS EN 1396 - ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
ISO 3116:2007 | Magnesium and magnesium alloys Wrought magnesium alloys |
DIN EN 755-3:2008-06 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form |
I.S. EN 16851:2017 | CRANES - LIGHT CRANE SYSTEMS |
07/30145003 DC : DRAFT JAN 2007 | EN 1386 - ALUMINIUM AND ALUMINIUM ALLOYS - TREAD PLATE - SPECIFICATIONS |
00/716910 DC : DRAFT NOV 2000 | BS EN ISO 15614-2 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
NF EN 4632-001 : 2008 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 001: GENERAL REQUIREMENTS |
DIN EN 16851 E : 2017 | CRANES - LIGHT CRANE SYSTEMS |
SAE AS1990D:2003(S2016) | ALUMINUM ALLOY TEMPERS |
PREN 4632-002 : 200P1 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS |
PREN 4632-001 : 200P1 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 001: GENERAL REQUIREMENTS |
I.S. EN 16914:2017 | ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS |
I.S. EN 754-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN 1999-1-1:2007 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES (INCLUDING IRISH NATIONAL ANNEX) |
BS EN 1999-1-1 : 2007 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
ONORM EN 754-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
NF EN 4632-002 : 2008 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS |
EN 485-2:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
DIN EN 754-3:2008-06 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form |
DIN EN 755-7:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 7: SEAMLESS TUBES, TOLERANCES ON DIMENSIONS AND FORM |
DIN EN 754-4:2008-06 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form |
DIN EN 755-2:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 2: MECHANICAL PROPERTIES |
DIN EN 755-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
DIN EN 755-8:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 8: PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM |
DIN EN 13981-2:2004-10 | Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for inspection and delivery - Part 2: Plates and sheets |
DIN EN 12487:2007-07 | Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
DIN EN 1715-4 E : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWING STOCK - PART 4: SPECIFIC REQUIREMENTS FOR WELDING APPLICATIONS |
DIN EN 754-5:2008-06 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form |
DIN EN 15088 E : 2006 | ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
DIN EN ISO 15614-2:2005-07 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005); German version EN ISO 15614-2:2005 |
DIN EN 851:2014-07 | Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications |
DIN EN 1715-1:2008-07 | Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical conditions for inspection and delivery |
DIN EN 941:2014-07 | Aluminium and aluminium alloys - Circle and circle stock for the production of general applications - Specifications |
BS EN 14286:2008 | Aluminium and aluminium alloys. Weldable rolled products for tanks for the storage and transportation of dangerous goods |
BS EN 754-2:2016 | Aluminium and aluminium alloys. Cold drawn rod/bar and tube Mechanical properties |
BS EN 12482-2:1998 | Aluminium and aluminium alloys. Reroll stock for general applications Specifications for cold rolled reroll stock |
BS EN 941:2014 | Aluminium and aluminium alloys. Circle and circle stock for the production of general applications. Specifications |
UNE-EN 754-2:2017 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties |
BS EN 1592-2:1998 | Aluminium and aluminium alloys. HF seam welded tubes Mechanical properties |
I.S. EN 13411-3:2004 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 3: FERRULES AND FERRULE-SECURING |
I.S. EN 851:2014 | ALUMINIUM AND ALUMINIUM ALLOYS - CIRCLE AND CIRCLE STOCK FOR THE PRODUCTION OF CULINARY UTENSILS - SPECIFICATIONS |
I.S. EN 1715-2:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWING STOCK - PART 2: SPECIFIC REQUIREMENTS FOR ELECTRICAL APPLICATIONS |
I.S. EN 1386:2007 | ALUMINIUM AND ALUMINIUM ALLOYS - TREAD PLATE - SPECIFICATIONS |
I.S. EN 754-7:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 7: SEAMLESS TUBES, TOLERANCES ON DIMENSIONS AND FORM |
I.S. EN 485-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN 754-5:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 5: RECTANGULAR BARS, TOLERANCES ON DIMENSIONS AND FORM |
I.S. EN 754-6:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 6: HEXAGONAL BARS, TOLERANCES ON DIMENSIONS AND FORM |
I.S. EN 755-4:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 4: SQUARE BARS, TOLERANCES ON DIMENSIONS AND FORM |
I.S. EN 546-1:2007 | ALUMINIUM AND ALUMINIUM ALLOYS - FOIL - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN 1301-2:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 2: MECHANICAL PROPERTIES |
EN 16851:2017 | Cranes - Light crane systems |
I.S. EN 1301-1:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN 941:2014 | ALUMINIUM AND ALUMINIUM ALLOYS - CIRCLE AND CIRCLE STOCK FOR THE PRODUCTION OF GENERAL APPLICATIONS - SPECIFICATIONS |
I.S. EN 755-5:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 5: RECTANGULAR BARS, TOLERANCES ON DIMENSIONS AND FORM |
I.S. EN 1715-4:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWING STOCK - PART 4: SPECIFIC REQUIREMENTS FOR WELDING APPLICATIONS |
I.S. EN 754-8:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 8: PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM |
I.S. EN 754-3:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 3: ROUND BARS, TOLERANCES ON DIMENSIONS AND FORM |
I.S. EN 1396:2015 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
I.S. EN 1715-1:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWING STOCK - PART 1: GENERAL REQUIREMENTS AND TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN 14286:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
I.S. EN 683-2:2006 | ALUMINIUM AND ALUMINIUM ALLOYS - FINSTOCK - PART 2: MECHANICAL PROPERTIES |
S.R. CEN/TR 17144:2017 | RESISTANCE OF METALLIC MATERIALS TO LIQUID BIOGENIC AND ALTERNATIVE FUELS AND THEIR BLENDS |
I.S. EN 12487:2007 | CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS |
I.S. EN 541:2006 | ALUMINIUM AND ALUMINIUM ALLOYS - ROLLED PRODUCTS FOR CANS, CLOSURES AND LIDS - SPECIFICATIONS |
I.S. EN 754-2:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 2: MECHANICAL PROPERTIES |
I.S. EN 755-9:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 9: PROFILES, TOLERANCES ON DIMENSIONS AND FORM |
I.S. EN 12020-1:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN 13195-1:2002 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODU- PART 1: SPECIFICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
I.S. EN 755-7:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 7: SEAMLESS TUBES, TOLERANCES ON DIMENSIONS AND FORM |
I.S. EN 755-3:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 3: ROUND BARS, TOLERANCES ON DIMENSIONS AND FORM |
I.S. EN 683-1:2006 | ALUMINIUM AND ALUMINIUM ALLOYS - FINSTOCK - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN 755-6:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 6: HEXAGONAL BARS, TOLERANCES ON DIMENSIONS AND FORM |
I.S. EN 1715-3:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWING STOCK - PART 3: SPECIFIC REQUIREMENTS FOR MECHANICAL USES (EXCLUDING WELDING) |
DIN EN 755-2:1997-08 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 2: MECHANICAL PROPERTIES |
I.S. EN 755-8:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 8: PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM |
I.S. EN 754-4:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 4: SQUARE BARS, TOLERANCES ON DIMENSIONS AND FORM |
I.S. EN 755-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN 546-2:2007 | ALUMINIUM AND ALUMINIUM ALLOYS - FOIL - PART 2: MECHANICAL PROPERTIES |
UNI EN 14286 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
SBAC TS 260 : 5 | METALLIC MATERIALS - LIST OF ALTERNATIVE MATERIAL SPECIFICATIONS & STANDARDS ONLY AUTHORISED FOR USE ON ADS STANDARD PARTS |
DIN EN 1999-1-1:2014-03 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
NFL 06 380-10 : 2003 | WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 10: GENERAL REQUIREMENTS |
06/30136187 DC : 0 | EN 755-1 - ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
07/30168407 DC : DRAFT DEC 2007 | BS EN 508-2 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
I.S. EN 1160:1997 | INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - GENERAL CHARACTERISTICS OF LIQUEFIED NATURAL GAS |
DIN EN 755-6:2008-06 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form |
06/30144982 DC : 0 | EN 1301-1 - ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
06/30144985 DC : 0 | EN 1301-2 - ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 2: MECHANICAL PROPERTIES |
03/306584 DC : 0 | EN 4400-5 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOY PRODUCTS - TECHNICAL SPECIFICATION - PART 5: ALUMINIUM AND ALUMINIUM ALLOY RIVET WIRE |
95/712875 DC : 0 | PREN 4500-2 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 2: SPECIFIC RULES FOR ALUMINIUM, ALUMINIUM ALLOYS AND MAGNESIUM ALLOYS |
PREN 754-1 : DRAFT 2015 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
15/30324463 DC : 0 | BS EN 755-2 - ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 2: MECHANICAL PROPERTIES |
15/30324460 DC : 0 | BS EN 754-1 - ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
BS EN 4632-001:2008 | Aerospace series. Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materials General requirements |
08/30187526 DC : 0 | BS EN 14121 - ALUMINIUM AND ALUMINIUM ALLOYS - ALUMINIUM SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
06/30136208 DC : 0 | EN 755-2 - ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 2: MECHANICAL PROPERTIES |
CR 12172:1995 | Numerical designation systems for metallic materials - Review of existing systems and recommendation for new systems |
S.R. CWA 15902-2:2009 | LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 2: SPECIFICATIONS FOR DESIGN, MANUFACTURE AND FOR USE OF ALUMINIUM AND STEEL TRUSSES AND TOWERS |
BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
EN 754-2:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties |
DIN EN 755-9:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 9: PROFILES, TOLERANCES ON DIMENSIONS AND FORM |
DIN EN 573-5:2007-11 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products |
DIN EN 546-1:2007-03 | Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery |
DIN EN 755-5:2008-06 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form |
DIN EN 1386:2008-05 | Aluminium and aluminium alloys - Tread plate - Specifications |
DIN EN 754-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN 603-3:2000 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT FORGING STOCK - PART 3: TOLERANCES ON DIMENSIONS AND FORM |
DIN EN 13981-4:2007-02 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings |
DIN EN 754-2:2016-05 (Draft) | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 2: MECHANICAL PROPERTIES |
DIN EN 1301-2:2008-12 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 2: MECHANICAL PROPERTIES |
DIN EN 1715-4:2008-07 | Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications |
DIN EN 1715-2:2008-07 | Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications |
BS EN 755-6:2008 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Hexagonal bars, tolerances on dimensions and form |
UNE-EN 755-1:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
UNE-EN 755-9:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form |
BS EN 13195-1:2002 | Aluminium and aluminium alloys. Wrought and cast products for marine applications (shipbuilding, marine and offshore) Specifications |
BS EN 1396:2007 | Aluminium and aluminium alloys. Coil coated sheet and strip for general applications. Specifications |
UNE-EN 754-8:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form |
BS EN 754-4:2008 | Aluminium and aluminium alloys. Cold drawn rod/bar and tube Square bars, tolerances on dimensions and form |
DIN EN 1715-3:2008-07 | Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding) |
BS EN 541:2006 | Aluminium and aluminium alloys. Rolled products for cans, closures and lids. Specifications |
BS EN 754-8:2016 | Aluminium and aluminium alloys. Cold drawn rod/bar and tube Porthole tubes, tolerances on dimensions and form |
BS EN 755-4:2008 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Square bars, tolerances on dimensions and form |
EN 754-7:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form |
EN 14532-3:2004 | Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
EN 1715-4:2008 | Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications |
EN 1999-1-1:2007/A2:2013 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
UNI EN 12487 : 2007 | CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS |
UNI EN 755-5 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 5: RECTANGULAR BARS, TOLERANCES ON DIMENSIONS AND FORM |
UNI EN 754-6 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 6: HEXAGONAL BARS, TOLERANCES ON DIMENSIONS AND FORM |
UNI EN 754-5 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 5: RECTANGULAR BARS, TOLERANCES ON DIMENSIONS AND FORM |
UNI EN ISO 15614-2 : 2006 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
UNI EN 754-7 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 7: SEAMLESS TUBES, TOLERANCES ON DIMENSIONS AND FORM |
UNI EN 755-8 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 8: PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM |
UNI EN 13958 : 2009 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN, ROUND, COILED TUBE FOR GENERAL APPLICATIONS - SPECIFICATION |
ONORM EN 12020-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
EN 683-1:2006 | Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery |
UNI EN 1301-2 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 2: MECHANICAL PROPERTIES |
UNI EN 13957 : 2009 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROUND, COILED TUBE FOR GENERAL APPLICATIONS - SPECIFICATION |
UNI EN 755-9 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 9: PROFILES, TOLERANCES ON DIMENSIONS AND FORM |
UNI EN 755-4 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 4: SQUARE BARS, TOLERANCES ON DIMENSIONS AND FORM |
UNI EN 755-3 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 3: ROUND BARS, TOLERANCES ON DIMENSIONS AND FORM |
UNI EN 1715-2 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWING STOCK - PART 2: SPECIFIC REQUIREMENTS FOR ELECTRICAL APPLICATIONS |
UNI EN 1715-4 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWING STOCK - PART 4: SPECIFIC REQUIREMENTS FOR WELDING APPLICATIONS |
UNI EN 754-4 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 4: SQUARE BARS, TOLERANCES ON DIMENSIONS AND FORM |
UNI EN 754-3 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 3: ROUND BARS, TOLERANCES ON DIMENSIONS AND FORM |
UNI EN 755-7 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 7: SEAMLESS TUBES, TOLERANCES ON DIMENSIONS AND FORM |
UNI EN 1301-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
UNI EN 14121 : 2009 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
UNI EN 755-6 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 6: HEXAGONAL BARS, TOLERANCES ON DIMENSIONS AND FORM |
UNI EN 1715-3 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWING STOCK - PART 3: SPECIFIC REQUIREMENTS FOR MECHANICAL USES (EXCLUDING WELDING) |
UNI EN 1715-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWING STOCK - PART 1: GENERAL REQUIREMENTS AND TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
UNI EN 755-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
UNI EN 754-8 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 8: PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM |
UNI EN 508-2 : 2008 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
15/30327154 DC : 0 | BS EN 16914 - ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS |
15/30296047 DC : 0 | BS EN 16851 - CRANES - LIGHT CRANE SYSTEMS |
DIN EN 16914 E : 2017 | ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS |
06/30150275 DC : 0 | EN 1715-1 - ALUMINIUM AND ALUMINIUM ALLOYS - DRAWING STOCK - PART 1: GENERAL REQUIREMENTS AND TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
PREN 485-2 : DRAFT 99 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
UNI EN 13411-3 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 3: FERRULES AND FERRULE-SECURING |
05/30133060 DC : 0 | EN 1090-3 - EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
BS EN 13195:2013 | Aluminium and aluminium alloys. Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
99/710776 DC : DRAFT JULY 1999 | PREN 485-2 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
PREN 14121 : DRAFT 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - ALUMINIUM SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
BS EN 16851:2017 | Cranes. Light crane systems |
BS EN 4632-002:2008 | Aerospace series. Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materials Homogeneous assemblies aluminium and aluminium alloys |
04/30050376 DC : DRAFT AUG 2004 | EN 13981-4 - ALUMINIUM AND ALUMINIUM ALLOYS - PRODUCTS FOR STRUCTURAL RAILWAY APPLICATIONS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY - PART 4: FORGINGS |
03/306585 DC : 0 | EN 4400-7 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOY PRODUCTS - TECHNICAL SPECIFICATION - PART 7: ALUMINIUM ALLOY FORGINGS |
06/30150281 DC : 0 | EN 1715-3 - ALUMINIUM AND ALUMINIUM ALLOYS - DRAWING STOCK - PART 3: SPECIFIC REQUIREMENTS FOR MECHANICAL USES (EXCLUDING WELDING) |
TR 2410 : 2 | AEROSPACE SERIES - METALLIC MATERIALS - RELATIONSHIP BETWEEN DIMENSIONAL STANDARDS AND MATERIAL STANDARDS |
PREN 4400-2 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 2: SHEET AND STRIP |
PREN 4500-2 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 2: SPECIFIC RULES FOR ALUMINIUM, ALUMINIUM ALLOYS AND MAGNESIUM ALLOYS |
DIN EN 16851:2015-05 (Draft) | CRANES - LIGHT CRANE SYSTEMS |
I.S. EN 4632-001:2008 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 001: GENERAL REQUIREMENTS |
ISO 19426-4:2018 | Structures for mine shafts — Part 4: Conveyances |
BS ISO 3116:2007 | Magnesium and magnesium alloys. Wrought magnesium alloys |
17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
UNE-EN 485-2:2017 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
DIN EN 16914:2015-12 (Draft) | ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS |
EN 754-1:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
I.S. EN 13195:2013 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
I.S. ENV 1999-1-1:1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
I.S. EN 755-2:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 2: MECHANICAL PROPERTIES |
EN 603-3:2000 | Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form |
DIN EN 14532-3:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 3: CONFORMITY ASSESSMENT OF WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM ALLOYS |
DIN EN ISO 15614-2 E : 2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
DIN EN 485-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
DIN EN 485-2:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
BS EN 755-7:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Seamless tubes, tolerances on dimensions and form |
UNE-EN 754-7:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form |
BS EN 12487:2007 | Corrosion protection of metals. Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
BS EN 683-1:2006 | Aluminium and aluminium alloys. Finstock Technical conditions for inspection and delivery |
UNE-EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
BS EN 1715-1:2008 | Aluminium and aluminium alloys. Drawing stock General requirements and technical conditions for inspection and delivery |
BS EN 288-4:1992 | Specification and approval of welding procedures for metallic materials Welding procedure tests for the arc welding of aluminium and its alloys |
BS EN 586-3:2001 | Aluminium and aluminium alloys. Forgings Tolerances on dimensions and form |
BS EN 755-1:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Technical conditions for inspection and delivery |
BS EN 755-5:2008 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Rectangular bars, tolerances on dimensions and form |
BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
BS EN 546-1:2006 | Aluminium and aluminium alloys. Foil Technical conditions for inspection and delivery |
UNE-EN 754-1:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
BS EN 586-1:1998 | Aluminium and aluminium alloys. Forgings Technical conditions for inspection and delivery |
UNE-EN 755-8:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form |
UNE-EN 13957:2010 | Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification |
UNE-EN 508-2:2010 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium |
BS EN 13981-2:2004 | Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Plates and sheets |
BS EN ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc welding of aluminium and its alloys |
UNE-EN 16914:2017 | Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditions |
BS EN 508-2:2008 | Roofing products from metal sheet. Specification for self supporting products of steel, aluminium or stainless steel sheet Aluminium |
UNE-EN 13958:2010 | Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification |
BS EN 754-5:2008 | Aluminium and aluminium alloys. Cold drawn rod/bar and tube Rectangular bars, tolerances on dimensions and form |
BS EN 755-9:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Profiles, tolerances on dimensions and form |
DIN EN 15088:2016-09 (Draft) | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German and English version prEN 15088:2016 |
BS EN 13957:2008 | Aluminium and aluminium alloys. Extruded round, coiled tube for general applications. Specification |
BS EN 15088:2005 | Aluminium and aluminium alloys. Structural products for construction works. Technical conditions for inspection and delivery |
BS EN 1160:1997 | Installations and equipment for liquefied natural gas. General characteristics of liquefied natural gas |
BS EN 14532-3:2004 | Welding consumables. Test methods and quality requirements Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
BS EN 12020-1:2008 | Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Technical conditions for inspection and delivery |
UNE-EN 755-7:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form |
BS EN 754-6:2008 | Aluminium and aluminium alloys. Cold drawn rod/bar and tube Hexagonal bars, tolerances on dimensions and form |
BS EN 1386:2007 | Aluminium and aluminium alloys. Tread plate. Specifications |
UNE-EN 485-1:2017 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
DIN EN 13411-3:2011-04 | Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing (includes Amendment A1:2008) |
EN 1715-3:2008 | Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding) |
UNI EN 12020-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
EN 603-1:1996 | Aluminium and aluminium alloys - Wrought forging stock - Part 1: Technical conditions for inspection and delivery |
EN 755-1:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
EN 1715-1:2008 | Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical conditions for inspection and delivery |
EN 586-1:1997 | Aluminium and aluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery |
EN 13981-2:2004 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 2: Plates and sheets |
EN 755-5:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form |
EN 508-2:2008 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium |
EN 546-1:2006 | Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery |
EN 13981-4:2006 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings |
EN 1592-1:1997 | Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery |
EN 15088:2005 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery |
EN 603-2:1996 | Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties |
EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
UNI EN 941 : 2014 | ALUMINIUM AND ALUMINIUM ALLOYS - CIRCLE AND CIRCLE STOCK FOR THE PRODUCTION OF GENERAL APPLICATIONS - SPECIFICATIONS |
EN 12020-1:2008 | Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery |
EN 16914:2017 | Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditions |
EN 755-8:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form |
EN 754-3:2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form |
EN 13957:2008 | Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification |
EN 546-2:2006 | Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties |
EN 1715-2:2008 | Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications |
EN 755-4:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form |
EN 4632-001:2008 | Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements |
EN 288-4:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURES FOR THE ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
EN 4632-002:2008 | Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys |
EN 754-6:2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form |
EN 755-9:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form |
EN ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
EN 13981-1:2003 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1: Extruded products |
EN 14121:2009 | Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications |
EN 683-2:2006 | Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties |
EN 755-6:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form |
EN 754-4:2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form |
EN 941:2014 | Aluminium and aluminium alloys - Circle and circle stock for the production of general applications - Specifications |
EN 1386:2007 | Aluminium and aluminium alloys - Tread plate - Specifications |
UNI EN 851 : 2014 | ALUMINIUM AND ALUMINIUM ALLOYS - CIRCLE AND CIRCLE STOCK FOR THE PRODUCTION OF CULINARY UTENSILS - SPECIFICATIONS |
EN 755-3:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form |
EN 573-5:2007 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products |
EN 541:2006 | Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications |
EN 754-8:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form |
EN 754-5:2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form |
EN 851:2014 | Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications |
ENV 1999-1-1 : 1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
EN 14286:2008 | Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods |
EN 586-3:2001 | Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form |
EN 1592-2:1997 | Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties |
EN 755-7:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form |
ISO 13640:1999 | Building construction Jointing products Specifications for test substrates |
05/30128365 DC : DRAFT JAN 2005 | EN 683-2 - ALUMINIUM AND ALUMINIUM ALLOYS - FIN STOCK - PART 2: MECHANICAL PROPERTIES |
05/30128384 DC : DRAFT JAN 2005 | EN 546-2 - ALUMINIUM AND ALUMINIUM ALLOYS - FOIL - PART 2: MECHANICAL PROPERTIES |
06/30136517 DC : 0 | EN 754-2 - ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 2: MECHANICAL PROPERTIES |
BS EN 16914:2017 | Aluminium and aluminium alloys. Hot-rolled armour plates in weldable aluminium alloy. Technical delivery conditions |
PD CEN/TR 17144:2017 | Resistance of metallic materials to liquid biogenic and alternative fuels and their blends |
NFL 06 380-20 : 2003 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 20: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS |
03/310514 DC : 0 | BS EN 4400-4 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOYS - TECHNICAL SPECIFICATION - PART 4: ALUMINIUM AND ALUMINIUM ALLOY TUBE |
DIN EN 754-7:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 7: SEAMLESS TUBES, TOLERANCES ON DIMENSIONS AND FORM |
PREN 4400-1 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 1: PLATE |
BS ISO 13640:1999 | Building construction. Jointing products. Specifications for test substrates |
PREN 1396 : DRAFT 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
PREN 4400-3 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 3: BAR AND SECTION |
BS EN 485-2:2013 | Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties |
UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
17/30356149 DC : 0 | BS EN 508-2 - ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
I.S. EN 4632-002:2008 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS |
I.S. EN 485-2:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
DIN EN 1715-1 E : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWING STOCK - PART 1: GENERAL REQUIREMENTS AND TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
DIN EN 12020-1:2008-06 | Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery |
DIN EN 1715-3 E : 2008 | ALUMINIUM AND ALUMINIUM ALLOY - DRAWING STOCK - PART 3: SPECIFIC REQUIREMENTS FOR MECHANICAL USES (EXCLUDING WELDING) |
DIN EN 1715-2 E : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWING STOCK - PART 2: SPECIFIC REQUIREMENTS FOR ELECTRICAL APPLICATIONS |
DIN EN 683-1:2007-03 | Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery |
DIN EN 586-1:1997-10 | ALUMINIUM AND ALUMINIUM ALLOYS - FORGINGS - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
DIN EN 14286 E : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
BS EN 13981-1:2003 | Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Extruded products |
BS EN 683-2:2006 | Aluminium and aluminium alloys. Finstock Mechanical properties |
UNE-EN 755-2:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
BS EN 754-3:2008 | Aluminium and aluminium alloys. Cold drawn rod/bar and tube Round bars, tolerances on dimensions and form |
BS EN 755-8:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Porthole tubes, tolerances on dimensions and form |
BS EN 755-3:2008 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Round bars, tolerances on dimensions and form |
BS EN 13411-3 : 2004 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 3: FERRULES AND FERRULE-SECURING |
BS EN 573-5:2007 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Codification of standardized wrought products |
BS EN 14121:2009 | Aluminium and aluminium alloys. Sheet, strip and plate for electrotechnical applications |
BS EN 1301-2:2008 | Aluminium and aluminium alloys. Drawn wire Mechanical properties |
BS EN 754-7:2016 | Aluminium and aluminium alloys. Cold drawn rod/bar and tube Seamless tubes, tolerances on dimensions and form |
EN 1301-2:2008 | Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties |
DIN EN 541:2007-03 | Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications |
DIN EN 16851:2017-06 | Cranes - Light crane systems |
EN 1301-1:2008 | Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery |
EN 12482-2:1998 | Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock |
DIN EN 14121:2009-09 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
DIN EN 15088:2006-03 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German version EN 15088:2005 |
DIN EN 13957:2009-01 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROUND, COILED TUBE FOR GENERAL APPLICATIONS - SPECIFICATION |
DIN EN 14286:2008-11 | ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
EN 12258-1:2012 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.