• EN 60204-32:2008

    Current The latest, up-to-date edition.

    SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES

    Available format(s): 

    Language(s): 

    Published date:  05-09-2008

    Publisher:  European Committee for Standards - Electrical

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    INTRODUCTION
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 General requirements
       4.1 General considerations
       4.2 Selection of equipment
            4.2.1 General
            4.2.2 Selection of power contactors
            4.2.3 Electrical equipment in compliance with the
                   IEC 60439 series
       4.3 Electrical supply
            4.3.1 General
            4.3.2 AC supplies
            4.3.3 DC supplies
            4.3.4 On-board power supply
       4.4 Physical environment and operating conditions
            4.4.1 General
            4.4.2 Electromagnetic compatibility (EMC)
            4.4.3 Ambient air temperature
            4.4.4 Humidity
            4.4.5 Altitude
            4.4.6 Contaminants
            4.4.7 Ionizing and non-ionizing radiation
            4.4.8 Vibration, shock, and bump
       4.5 Transportation and storage
       4.6 Provisions for handling
       4.7 Installation
    5 Incoming supply conductor terminations and devices for
       disconnecting and switching off
       5.1 Incoming supply conductor terminations
       5.2 Terminal for connection to the external protective earthing
            system
       5.3 Supply disconnecting and switching devices
            5.3.1 General
            5.3.2 Type
            5.3.3 Requirements
            5.3.4 Operating means
            5.3.5 Crane-supply-switch
            5.3.6 Crane-disconnector
            5.3.7 Crane-switch
            5.3.8 Special circuits
       5.4 Devices for switching off for prevention of unexpected
            start-up
       5.5 Devices for disconnecting electrical equipment
       5.6 Protection against unauthorized, inadvertent and/or
            mistaken connection
    6 Protection against electric shock
       6.1 General
       6.2 Protection against direct contact
            6.2.1 General
            6.2.2 Protection by enclosures
            6.2.3 Protection by insulation of live parts
            6.2.4 Protection against residual voltages
            6.2.5 Protection by barriers
            6.2.6 Protection by placing out of reach or protection
                   by obstacles
       6.3 Protection against indirect contact
            6.3.1 General
            6.3.2 Prevention of the occurrence of a touch voltage
            6.3.3 Protection by automatic disconnection of supply
       6.4 Protection by the use of PELV
            6.4.1 General requirements
            6.4.2 Sources for PELV
    7 Protection of equipment
       7.1 General
       7.2 Overcurrent protection
            7.2.1 General
            7.2.2 Supply conductors
            7.2.3 Power circuits
            7.2.4 Control circuits
            7.2.5 Socket outlets and their associated conductors
            7.2.6 Lighting circuits
            7.2.7 Transformers
            7.2.8 Location of overcurrent protective devices
            7.2.9 Overcurrent protective devices
            7.2.10 Rating and setting of overcurrent protective devices
       7.3 Protection of motors against overheating
            7.3.1 General
            7.3.2 Overload protection
            7.3.3 Over-temperature protection
            7.3.4 Current limiting protection
       7.4 Abnormal temperature protection
       7.5 Protection against supply interruption or voltage reduction
            and subsequent restoration
       7.6 Motor overspeed protection
       7.7 Earth fault/residual current protection
       7.8 Phase-sequence protection
       7.9 Protection against switching surges and lightning
    8 Equipotential bonding
       8.1 General
       8.2 Protective bonding circuit
            8.2.1 General
            8.2.2 Protective conductors
            8.2.3 Continuity of the protective bonding circuit
            8.2.4 Exclusion of switching devices from the protective
                   bonding circuit
            8.2.5 Parts that need not be connected to the protective
                   bonding circuit
            8.2.6 Protective conductor connecting points
            8.2.7 Additional protective bonding requirements for
                   electrical equipment having earth leakage currents
                   higher than 10 mA a.c. or d.c
       8.3 Functional bonding
       8.4 Measures to limit the effects of high leakage current
    9 Control circuits and control functions
       9.1 Control circuits
            9.1.1 Control circuit supply
            9.1.2 Control circuit voltages
            9.1.3 Protection
       9.2 Control functions
            9.2.1 Start functions
            9.2.2 Stop functions
            9.2.3 Operating modes
            9.2.4 Suspension of safeguarding
            9.2.5 Operation
            9.2.6 Other control functions
            9.2.7 Cableless controls
       9.3 Protective interlocks
            9.3.1 Reclosing or resetting of an interlocking safeguard
            9.3.2 Exceeding operating limits
            9.3.3 Operation of auxiliary functions
            9.3.4 Interlocks between different operations and for
                   contrary motions
            9.3.5 Reverse current braking
       9.4 Control functions in the event of failure
            9.4.1 General requirements
            9.4.2 Measures to minimize risk in the event of failure
            9.4.3 Protection against mal-operation due to earth faults,
                   voltage interruptions, and loss of circuit continuity
            9.4.4 Protection against mal-operation of a motion
                   control system
    10 Operator interface and hoisting machine mounted control
       devices
       10.1 General
            10.1.1 General device requirements
            10.1.2 Location and mounting
            10.1.3 Protection
            10.1.4 Position sensors
            10.1.5 Portable and pendant control stations
       10.2 Push-buttons
            10.2.1 Colours
            10.2.2 Markings
       10.3 Indicator lights and displays
            10.3.1 General
            10.3.2 Colours
            10.3.3 Flashing lights and displays
       10.4 Illuminated push-buttons
       10.5 Rotary control devices
       10.6 Start devices
       10.7 Emergency stop devices
            10.7.1 Location of emergency stop devices
            10.7.2 Types of emergency stop device
            10.7.3 Colour of actuators
            10.7.4 Local operation of the crane-supply-switch and
                   the crane-disconnector to effect emergency stop
       10.8 Emergency switching-off devices
            10.8.1 Location of emergency switching-off devices
            10.8.2 Types of emergency switching off device
            10.8.3 Colour of actuators
            10.8.4 Local operation of the crane-supply-switch and the
                   crane-disconnector to effect emergency switching off
       10.9 Enabling control device
    11 Controlgear: location, mounting, and enclosures
       11.1 General requirements
       11.2 Location and mounting
            11.2.1 Accessibility and maintenance
            11.2.2 Physical separation or grouping
            11.2.3 Heating effects
       11.3 Degrees of protection
       11.4 Enclosures, doors and openings
       11.5 Access to switchgear and to controlgear
            11.5.1 General
            11.5.2 Access to gangways
            11.5.3 Gangways in front of switchgear and controlgear
            11.5.4 Gangway and door restrictions
    12 Conductors and cables
       12.1 General requirements
       12.2 Conductors
       12.3 Insulation
       12.4 Current-carrying capacity in normal service
       12.5 Voltage drop
       12.6 Flexible cables
            12.6.1 General
            12.6.2 Mechanical rating
            12.6.3 Current-carrying capacity of cables wound on drums
       12.7 Conductor wires, conductor bars and slip-ring assemblies
            12.7.1 Protection against direct contact
            12.7.2 Protective conductor circuit
            12.7.3 Protective conductor current collectors
            12.7.4 Removable current collectors with a disconnector function
            12.7.5 Clearances in air
            12.7.6 Creepage distances
            12.7.7 Conductor system sectioning
            12.7.8 Construction and installation of conductor wire,
                   conductor bar systems and slip-ring assemblies
    13 Wiring practices
       13.1 Connections and routing
            13.1.1 General requirements
            13.1.2 Conductor and cable runs
            13.1.3 Conductors of different circuits
            13.1.4 Connection between pick-up and pick-up converter
                   of an inductive power supply system
       13.2 Identification of conductors
            13.2.1 General requirements
            13.2.2 Identification of the protective conductor
            13.2.3 Identification of the neutral conductor
            13.2.4 Identification by colour
       13.3 Wiring inside enclosures
       13.4 Wiring outside enclosures
            13.4.1 General requirements
            13.4.2 External ducts
            13.4.3 Connection to the hoisting machine and to moving
                   elements on the hoisting machine
            13.4.4 Interconnection of devices on the hoisting machine
            13.4.5 Plug/socket combinations
            13.4.6 Dismantling for shipment
            13.4.7 Additional conductors
       13.5 Ducts, connection boxes and other boxes
            13.5.1 General requirements
            13.5.2 Percentage fill of ducts
            13.5.3 Rigid metal conduits and fittings
            13.5.4 Flexible metal conduits and fittings
            13.5.5 Flexible non-metallic conduits and fittings
            13.5.6 Cable trunking systems
            13.5.7 Hoisting machine compartments and cable trunking
                   systems
            13.5.8 Connection boxes and other boxes
            13.5.9 Motor connection boxes
    14 Electric motors and associated equipment
       14.1 General requirements
       14.2 Motor enclosures
       14.3 Motor dimensions
       14.4 Motor mounting and compartments
       14.5 Criteria for motor selection
       14.6 Protective devices for mechanical brakes
       14.7 Electrically operated mechanical brakes
    15 Accessories and lighting
       15.1 Accessories
       15.2 Local lighting on the hoisting machine and for the
            equipment
            15.2.1 General
            15.2.2 Supply
            15.2.3 Protection
            15.2.4 Fittings
    16 Marking, warning signs and reference designations
       16.1 General
       16.2 Warning signs
            16.2.1 Electric shock hazard
            16.2.2 Hot surfaces hazard
       16.3 Functional identification
       16.4 Marking of equipment
       16.5 Reference designations
    17 Documentation
       17.1 General
       17.2 Information to be provided
       17.3 Requirements applicable to all documentation
       17.4 Installation documents
       17.5 Overview diagrams and function diagrams
       17.6 Circuit diagrams
       17.7 Operating manual
       17.8 Maintenance manual
       17.9 Parts list
    18 Verification
       18.1 General
       18.2 Verification of conditions for protection by automatic
            disconnection of supply
            18.2.1 General
            18.2.2 Test methods in TN-systems
            18.2.3 Application of the test methods for TN-systems
       18.3 Insulation resistance tests
       18.4 Voltage tests
       18.5 Protection against residual voltages
       18.6 Functional tests
       18.7 Retesting
    Annex A (normative) - Protection against indirect contact in
                          TN-systems
    Annex B (informative) - Inquiry form for the electrical equipment
                            of hoisting machines
    Annex C (informative) - Current-carrying capacity and overcurrent
                            protection of conductors and cables in the
                            electrical equipment of machines
    Annex D (informative) - Conductor selection for intermittent duty
    Annex E (informative) - Explanation of emergency operation functions
    Annex F (informative) - Comparison of typical conductor cross-sectional
                            areas
    Bibliography
    Annex ZA (normative) - Normative references to international
                           publications with their corresponding
                           European publications
    Annex ZZ (informative) - Coverage of Essential Requirements of EC
                             Directives
    Annex ZZA (informative) - Coverage of Essential Requirements of
                              Directive 98/37/EC
    Annex ZZB (informative) - Coverage of Essential Requirements of
                              Directive 2006/42/EC

    Abstract - (Show below) - (Hide below)

    IEC 60204-32 applies to the application of electrical and electronic equipment and systems to hoisting machines and related equipment.

    General Product Information - (Show below) - (Hide below)

    Committee CLC/TC 44X
    Document Type Standard
    Publisher European Committee for Standards - Electrical
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    04/19993045 DC : 0 EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    PREN 474-12 : DRAFT 2017 EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
    DIN EN 15954-2:2013-11 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
    DIN EN 15955-2:2013-09 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    PREN 1808 : DRAFT 2011 SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA AND CONSTRUCTION - EXAMINATIONS AND TESTS
    15/30296047 DC : 0 BS EN 16851 - CRANES - LIGHT CRANE SYSTEMS
    DIN EN 81-31:2010-08 Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts
    07/30161753 DC : 0 BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES
    BS EN 81-41:2010 Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Vertical lifting platforms intended for use by persons with impaired mobility
    I.S. EN 13814:2005 FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
    VDI 4411:2009-03 (Draft) Brake devices for cranes
    PREN 1493 : DRAFT 2008 VEHICLE LIFTS
    13/30256922 DC : 0 BS EN 1459-1 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
    10/30194893 DC : 0 BS EN 13135-2:2004/A1 - CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
    PREN 17076 : DRAFT 2017 ANTI-COLLISION DEVICES AND SYSTEMS FOR TOWER CRANE - SAFETY CHARACTERISTICS AND REQUIREMENTS
    04/30122476 DC : 0 EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    14/30285286 DC : 0 BS EN 14439 - CRANES - SAFETY - TOWER CRANES
    04/30116569 DC : DRAFT NOV 2004 EN 15056 - CRANES - REQUIREMENTS FOR SPREADERS
    NBR 16200 : 2013 BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES - SAFETY REQUIREMENTS FOR CONSTRUCTION AND INSTALLATION OF LIFTS
    UNI EN 81-41 : 2011 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
    11/30215034 DC : DRAFT MAR 2011 BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
    09/30202532 DC : 0 BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    04/102158 DC : 0 BS EN 81-43 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: SPECIAL PURPOSE LIFTS FOR CRANES
    07/30172833 DC : DRAFT DEC 2007 BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED - EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    BS EN 1570-2:2016 Safety requirements for lifting tables Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s
    UNE-EN 81-41:2011 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
    BS EN 15954-2:2013 Railway applications. Track. Trailers and associated equipment General safety requirements
    VDI 4412:2016-05 CABLELESS CONTROL OF CRANES
    BS EN 14033-3 : 2009 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
    BS EN 12999 : 2011 CRANES - LOADER CRANES
    PREN 14492-1 : DRAFT 2015 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    VDI 3572:2017-08 ENERGY AND DATA TRANSMISSION SYSTEMS FOR CRANES
    VDI 4449:2009-04 GUIDANCE ON THE MODIFICATION OF CRANE SYSTEMS
    03/301332 DC : DRAFT JAN 2003 ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
    13/30257309 DC : 0 BS EN 1459-2 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
    08/30181434 DC : DRAFT DEC 2008 BS EN 12159 AMD1 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
    07/30163503 DC : 0 BS ISO 20474-12 - EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR ROPE EXCAVATORS
    10/30233953 DC : 0 BS EN 16191 - TUNNELLING MACHINERY - SAFETY REQUIREMENTS
    14/30258503 DC : 0 BS EN 14033-3 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
    VDI 2388:2007-10 OVERHEAD TRAVELLING CRANES IN BUILDINGS - LAYOUT DATA
    03/100093 DC : DRAFT JAN 2003 BS EN 14502-2 - CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 2: ELEVATING CONTROL STATIONS
    DIN EN 1570-2 E : 2017 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
    04/30058509 DC : DRAFT JUNE 2004 BS EN 14985 - CRANES - SLEWING JIB CRANES
    I.S. EN 13000:2010 CRANES - MOBILE CRANES
    I.S. EN 12151:2007 MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
    UNE-EN 16851:2017 Cranes - Light crane systems
    DIN EN 16851 E : 2017 CRANES - LIGHT CRANE SYSTEMS
    DIN EN 81-43:2010-05 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes
    16/30339195 DC BS EN 81-41. Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods. Part 41. Vertical lifting platforms intended for use by persons with impaired mobility
    PREN 14439 : DRAFT 2014 CRANES - SAFETY - TOWER CRANES
    UNE-EN 1570-2:2017 Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s
    02/710617 DC : 0 BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    14/30295634 DC : 0 BS EN 16719 - TRANSPORT PLATFORMS
    11/30235009 DC : 0 BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
    BS EN 16851:2017 CRANES - LIGHT CRANE SYSTEMS
    11/30234386 DC : 0 BS EN 1808 - SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA AND CONSTRUCTION - EXAMINATIONS AND TESTS
    08/30187719 DC : 0 BS EN 1493 - VEHICLE LIFTS
    18/30366946 DC : 0 BS EN 17206 - ENTERTAINMENT TECHNOLOGY - LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - SPECIFICATIONS FOR GENERAL REQUIREMENTS (EXCLUDING ALUMINUM AND STEEL TRUSSES AND TOWERS)
    12/30244743 DC : 0 BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    BS EN 15955-2:2013 Railway applications. Track. Demountable machines and associated equipment General safety requirements
    02/710588 DC : DRAFT AUG 2002 BS EN 14439 - CRANES - TOWER CRANES
    PREN 16191 : DRAFT 2010 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
    09/30201429 DC : 0 BS EN 280 - MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATION AND TESTS
    09/30202538 DC : DRAFT JUN 2009 BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    I.S. EN 16851:2017 CRANES - LIGHT CRANE SYSTEMS
    09/30202029 DC : 0 BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
    04/30113996 DC : 0 PREN 81-41 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
    NBR 14768 : 2015 CRANES - LOADER CRANES - REQUIREMENTS
    07/30164729 DC : 0 BS EN 12999 - CRANES - LOADER CRANES
    I.S. EN 81-43:2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES
    NF EN 81-31 : 2011 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
    PREN 15746-2 : DRAFT 2015 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    09/30187535 DC : 0 BS EN 13000 - CRANES - MOBILE CRANES
    04/30111616 DC : 0 EN 81-40 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
    04/30126149 DC : 0 EN 528 - RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY
    NF EN 15746-2 : 2010 + A1 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    I.S. EN 12999:2011 CRANES - LOADER CRANES
    I.S. EN 1570-2:2016 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
    I.S. EN 15746-2:2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    I.S. EN 15955-2:2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    UNE-EN 14985:2012 Cranes - Slewing jib cranes
    BS EN 15746-2 : 2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    I.S. EN 16719:2018 TRANSPORT PLATFORMS
    I.S. EN 81-41:2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
    BS EN 13135 : 2013 CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
    EN 13135:2013+A1:2018 CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
    PREN 17206 : DRAFT 2018 ENTERTAINMENT TECHNOLOGY - LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - SPECIFICATIONS FOR GENERAL REQUIREMENTS (EXCLUDING ALUMINUM AND STEEL TRUSSES AND TOWERS)
    16/30328759 DC : 0 BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
    PREN 13852-1 : DRAFT 2011 CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
    NF EN 81-41 : 2011 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
    UNI EN 81-31 : 2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
    I.S. EN 13135:2013 CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
    16/30341165 DC : 0 BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    13/30273889 DC : 0 BS EN 16517 - AGRICULTURAL AND FORESTRY MACHINERY - MOBILE YARDERS FOR TIMBER LOGGING - SAFETY
    15/30279801 DC : 0 BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    EN 16719 : 2018 TRANSPORT PLATFORMS
    17/30348010 DC : 0 BS EN 17076 - ANTI-COLLISION DEVICES AND SYSTEMS FOR TOWER CRANE - SAFETY CHARACTERISTICS AND REQUIREMENTS
    EN 12999:2011+A2:2018 CRANES - LOADER CRANES
    UNE-EN 12999:2011 Cranes - Loader cranes
    UNI EN 81-43 : 2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES
    PREN 16517 : DRAFT 2017 AGRICULTURAL AND FORESTRY MACHINERY - MOBILE YARDERS FOR TIMBER LOGGING - SAFETY
    EN 13000:2010+A1:2014 CRANES - MOBILE CRANES
    UNI EN 528 : 2009 RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS
    BS EN 81-43 : 2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES
    12/30244749 DC : 0 BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    BS EN 81-31:2010 Safety rules for the construction and installation of lifts. Lifts for the transport of goods only Accessible goods only lifts
    VDI 3570:2013-08 OVERLOAD SAFEGUARDS FOR CRANES
    I.S. EN 15954-2:2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    S.R. CWA 16688:2013 BATTERY SWAP SYSTEMS INTERFACES FOR ELECTRIC VEHICLES
    DIN EN 12999:2013-02 CRANES - LOADER CRANES
    DIN EN 13135:2013-05 CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
    UNE-EN 13135:2013 Cranes - Safety - Design - Requirements for equipment
    I.S. EN 14033-3:2017 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
    I.S. EN 81-31:2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
    I.S. EN 15011:2011 CRANES - BRIDGE AND GANTRY CRANES
    DIN EN 14985:2012-05 Cranes - Slewing jib cranes
    UNE-EN 280:2014 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
    VDI 2381-1 : 2009 FINAL INSPECTION OF STATIONARY AND TRACK-BOUND CRANES - INSTRUCTIONAL FORM FOR EXPERTS
    S.R. CWA 15902-1:2009 LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS)
    I.S. EN 14492-2:2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    VDI 2381-2 : 2009 FINAL INSPECTION OF MOBILE CRANES - INSTRUCTIONAL FORM FOR EXPERTS
    DIN EN 1808:2015-08 SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
    DIN EN 12158-2:2011-04 Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices (includes Amendment A1:2010)
    DIN EN 1494:2009-05 MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT
    DIN EN 13000:2014-11 CRANES - MOBILE CRANES
    DIN EN 1493:2011-02 Vehicle lifts
    DIN EN 14985 E : 2012 CRANES - SLEWING JIB CRANES
    DIN EN 13135-1:2011-04 CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
    DIN EN 12158-1:2011-06 Builders' hoists for goods - Part 1: Hoists with accessible platforms (includes Amendment A1:2010)
    DIN EN 14238 E : 2010 CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
    DIN EN 13135-2:2011-07 CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
    DIN EN 13557:2009-07 CRANES - CONTROLS AND CONTROL STATIONS
    DIN EN 14502-2 E : 2009 CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 2: ELEVATING CONTROL STATIONS
    DIN EN 15056 E : 2010 CRANES - REQUIREMENTS FOR CONTAINER HANDLING SPREADERS
    DIN EN 280:2016-04 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests (includes Amendment A1:2015)
    DIN EN 13814:2005-06 FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
    DIN EN 528:2009-02 Rail dependent storage and retrieval equipment - Safety requirements
    DIN EN 14439:2010-03 CRANES - SAFETY - TOWER CRANES
    DIN EN 13852-1:2014-01 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
    DIN EN 474-12:2010-05 Earth-moving machinery - Safety - Part 12: Requirements for cable excavators (includes Amendment A1:2008)
    DIN EN 14502-2:2009-05 CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 2: ELEVATING CONTROL STATIONS
    DIN EN 14439:2010-03 Cranes - Safety - Tower cranes (includes Amendment A2:2009)
    DIN EN 14238:2010-02 Cranes - Manually controlled load manipulating devices (includes Amendment A1:2009)
    DIN EN 15011:2014-09 Cranes - Bridge and gantry cranes (includes Amendment A1:2014)
    BS EN 15056 : 2006 CRANES - REQUIREMENTS FOR CONTAINER HANDLING SPREADERS
    BS EN 14238 : 2004 CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
    BS EN 1493:2010 Vehicle lifts
    11/30235014 DC : 0 BS EN 13135 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
    BS EN 13814 : 2004 FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
    BS EN 13557 : 2003 CRANES - CONTROLS AND CONTROL STATIONS
    UNE-EN 1808:2016 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests
    UNE-EN 1846-3:2015 Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance
    BS EN 13135-1 : 2003 CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
    BS EN 1846-3 : 2013 FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE
    UNE-EN 15954-2:2014 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
    BS EN 13135-2 : 2004 CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
    UNE-EN 15955-2:2014 Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
    UNE-EN 1493:2011 Vehicle lifts
    BS EN 13000 : 2010 CRANES - MOBILE CRANES
    BS EN 280 : 2013 MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS
    BS EN 528:2008 RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS
    13/30272150 DC : 0 BS EN 13814 - FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURE - SAFETY
    BS EN 12158-1 : 2000 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
    BS EN 13852-1 : 2013 CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
    BS EN 14492-2 : 2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    17/30357380 DC : 0 BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES
    BS EN 12158-2 : 2000 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
    BS EN 14985 : 2012 CRANES - SLEWING JIB CRANES
    BS EN 14492-1 : 2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    BS EN 14502-2 : 2005 CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 2: ELEVATING CONTROL STATIONS
    BS EN 1808:2015 SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
    BS EN 15011 : 2011 CRANES - BRIDGE AND GANTRY CRANES
    UNE-EN 12158-1:2001 Builders hoists for goods. Part 1: Hoists with accessible platforms.
    10/30218104 DC : 0 BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES
    BS EN 474-12 : 2006 EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
    BS EN 14439 : 2006 CRANES - SAFETY - TOWER CRANES
    BS EN 1494 : 2001 MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT
    UNE-EN 12158-2:2001 Builders hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices.
    DIN EN 15056:2010-02 Cranes - Requirements for container handling spreaders (includes Amendment A1:2009)
    UNE-EN 13852-1:2014 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
    BS EN 12151 : 2007 MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
    UNE-EN 13135-2:2005 Cranes - Equipment - Part 2: Non-electrotechnical equipment
    I.S. EN 12158-1:2000 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
    I.S. EN 14492-1:2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    I.S. EN 12158-2:2000 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
    EN 15746-2:2010+A1:2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    I.S. EN 15056:2006 CRANES - REQUIREMENTS FOR CONTAINER HANDLING SPREADERS
    EN 16851:2017 CRANES - LIGHT CRANE SYSTEMS
    I.S. EN 1808:2015 SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
    I.S. EN 14439:2006 CRANES - SAFETY - TOWER CRANES
    I.S. EN 14238:2004 CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
    DIN EN 14492-1:2010-06 Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009)
    I.S. EN 1494:2000 MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT
    I.S. EN 13852-1:2013 CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES
    I.S. EN 1846-3:2013 FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE
    DIN EN 13135-1:2004-05 CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
    I.S. EN 14502-2:2005 CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 2: ELEVATING CONTROL STATIONS
    I.S. EN 474-12:2006 EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
    I.S. EN 1493:2010 VEHICLE LIFTS
    EN 15011:2011+A1:2014 CRANES - BRIDGE AND GANTRY CRANES
    I.S. EN 13557:2003 CRANES - CONTROLS AND CONTROL STATIONS
    I.S. EN 280:2013 MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS
    UNI EN 15746-2 : 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    I.S. EN 14985:2012 CRANES - SLEWING JIB CRANES
    I.S. EN 528:2008 RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS
    EN 528:2008 RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS
    UNI EN 12158-1 : 2010 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
    EN 12151:2007 MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
    EN 13135-2:2004+A1:2010 CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
    EN 13557:2003+A2:2008 CRANES - CONTROLS AND CONTROL STATIONS
    DIN EN 14492-2:2010-05 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    EN 13135-1:2003+A1:2010 CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
    DIN EN 1570-2:2017-03 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
    DIN EN 16851:2017-06 Cranes - Light crane systems
    DIN EN 81-41:2011-09 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
    DIN EN 1846-3:2013-11 FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE
    DIN EN 12151:2008-05 MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
    DIN EN 15746-2:2011-12 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011)
    UNI EN 15011 : 2014 CRANES - BRIDGE AND GANTRY CRANES
    EN 12158-1:2000+A1:2010 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
    EN 15954-2 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    EN 81-43 : 2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES
    EN 13814 : 2004 FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
    EN 1808:2015 SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
    EN 1493:2010 VEHICLE LIFTS
    EN 15955-2 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    EN 81-31 : 2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
    EN 1494:2000+A1:2008 (edition 2) Mobile or movable jacks and associated lifting equipment
    EN 14985:2012 CRANES - SLEWING JIB CRANES
    EN 15056:2006+A1:2009 Cranes - Requirements for container handling spreaders
    EN 14238:2004+A1:2009 CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
    EN 14492-1:2006+A1:2009/AC:2010 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    EN 13852-1:2013 CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
    EN 474-12:2006+A1:2008 EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
    EN 14439:2006+A2:2009 CRANES - SAFETY - TOWER CRANES
    EN 14502-2:2005+A1:2008 Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations
    EN 14033-3:2017 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
    EN 12158-2:2000+A1:2010 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
    EN 14492-2:2006+A1:2009/AC:2010 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    EN 280:2013+A1:2015 MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS
    EN 1846-3:2013 FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE
    UNI EN 1846-3 : 2013 FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE
    UNI EN 13135-2 : 2010 CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
    UNI EN 13557 : 2008 CRANES - CONTROLS AND CONTROL STATIONS
    UNI EN 474-12 : 2009 EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
    UNI EN 15954-2 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    UNI EN 14985 : 2012 CRANES - SLEWING JIB CRANES
    UNI EN 1493 : 2010 VEHICLE LIFTS
    UNI EN 14238 : 2009 CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
    UNI EN 13000 : 2014 CRANES - MOBILE CRANES
    UNI EN 14492-2 : 2009 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
    UNI EN 1494 : 2009 MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT
    UNI EN 15955-2 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    UNI EN 14492-1 : 2009 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
    UNI EN 12158-2 : 2010 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
    UNI EN 13135-1 : 2010 CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 60446:2007 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF CONDUCTORS BY COLOURS OR ALPHANUMERICS
    IEC 60320-1:2015 Appliance couplers for household and similar general purposes - Part 1: General requirements
    IEC 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
    IEC 60038:2009 IEC standard voltages
    IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
    IEC 60364-4-43:2008 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
    IEC 60228:2004 Conductors of insulated cables
    ISO 14122-3:2016 Safety of machinery Permanent means of access to machinery Part 3: Stairs, stepladders and guard-rails
    IEC 61984:2008 Connectors - Safety requirements and tests
    ISO 14122-1:2016 Safety of machinery Permanent means of access to machinery Part 1: Choice of fixed means and general requirements of access
    EN 61800-5-2:2017 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL (IEC 61800-5-2:2016)
    IEC 60204-31:2013 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
    IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
    EN 62023:2012 STRUCTURING OF TECHNICAL INFORMATION AND DOCUMENTATION (IEC 62023:2011)
    IEC 60050-195:1998 International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock
    IEC 60947-4-1:2009+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
    EN 60034-1:2010/corrigendum Oct. 2010 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
    IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
    IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
    EN 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
    EN 61558-1:2005/A1:2009 SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
    IEC 60050-411:1996 International Electrotechnical Vocabulary (IEV) - Part 411: Rotating machinery
    IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV Plugs and socket-outlets for household and similar purposes - Part1: General requirements
    IEC 60050-441:1984 International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
    IEC 62023:2011 Structuring of technical information and documentation
    IEC GUIDE 106:1996 Guide for specifying environmental conditions for equipmentperformance rating
    ISO 13852:1996 Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs
    IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control
    HD 60364-4-41:2017/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
    HD 60364-5-54:2011/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
    EN ISO 13850:2015 SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN (ISO 13850:2015)
    IEC 61000-6-1 : 3.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
    IEC 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
    IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
    ISO 14118:2000 Safety of machinery Prevention of unexpected start-up
    ISO 13851:2002 Safety of machinery Two-hand control devices Functional aspects and design principles
    IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV Low-voltage fuses - Part 1: General requirements
    IEC 62027:2011 Preparation of object lists, including parts lists
    IEC TR 61000-5-2:1997 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling
    IEC 61082-1:2014 RLV Preparation of documents used in electrotechnology - Part 1: Rules
    IEC 60050-442:1998 International Electrotechnical Vocabulary (IEV) - Part 442: Electrical accessories
    EN 60947-1:2007/A2:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
    IEC 60757:1983 Code for designation of colours
    IEC 60364-1:2005 Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
    IEC 60072-1:1991 Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
    EN 61557-3:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance
    EN 60947-3:2009/A2:2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS (IEC 60947-3:2008/A2:2015)
    IEC 61558-2-17:1997 Safety of power transformers, power supply units and similar - Part2: Particular requirements for transformers for switch mode powersupplies
    IEC 61000-6-3:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
    EN 60068-2-27:2009 ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK
    IEC 60364-6:2016 Low voltage electrical installations - Part 6: Verification
    EN 60447:2004 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - ACTUATING PRINCIPLES
    HD 60364-5-534:2016 (edition 2) Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control - Clause 534: Devices for protection against transient overvoltages
    IEC 61180-2:1994 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
    IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
    IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
    HD 60364-1:2008/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: FUNDAMENTAL PRINCIPLES, ASSESSMENT OF GENERAL CHARACTERISTICS, DEFINITIONS
    EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
    EN 60034-11 : 2004 ROTATING ELECTRICAL MACHINES - PART 11: THERMAL PROTECTION
    EN 60947-4-1 : 2010 AMD 1 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012)
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
    EN 62079 : 2001 PREPARATION OF INSTRUCTIONS - STRUCTURING, CONTENT AND PRESENTATION
    EN 62061:2005/A2:2015 SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015)
    EN 60664-1:2007 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
    IEC 60439-1:1999+AMD1:2004 CSV Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
    ISO 13849-2:2012 Safety of machinery Safety-related parts of control systems Part 2: Validation
    ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
    IEC 62079:2001 Preparation of instructions - Structuring, content and presentation
    EN 61082-1:2015 PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - PART 1: RULES (IEC 61082-1:2014)
    IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
    EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
    IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
    IEC 60072-2:1990 Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360
    EN 60439-1:1999/A1:2004 LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
    HD 516 S2:1997/A2:2008 GUIDE TO USE OF LOW VOLTAGE HARMONIZED CABLES
    EN ISO 13849-2:2012 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
    IEC 60050-826:2004 International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
    ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
    EN ISO 13849-1:2015 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
    EN 61140:2016 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT (IEC 61140:2016)
    ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
    IEC 60947-5-2:2007+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 5-2: Control circuitdevices and switching elements - Proximity switches
    EN 61558-2-6:2009 SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-6: PARTICULAR REQUIREMENTS AND TESTS FOR SAFETY ISOLATING TRANSFORMERS AND POWER SUPPLY UNITS INCORPORATING SAFETY ISOLATING TRANSFORMERS
    IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
    IEC 60870-5-1:1990 Telecontrol equipment and systems. Part 5: Transmission protocols - Section One: Transmission frame formats
    EN 61984:2009 CONNECTORS - SAFETY REQUIREMENTS AND TESTS
    IEC 60947-2:2016 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
    EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
    ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
    IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
    IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
    EN 60947-2:2017 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT-BREAKERS (IEC 60947-2:2016 + COR1:2016)
    EN 60068-2-32 : 1993 BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST ED: FREE FALL
    ISO 14122-2:2016 Safety of machinery Permanent means of access to machinery Part 2: Working platforms and walkways
    EN 62027:2012 PREPARATION OF OBJECT LISTS, INCLUDING PARTS LISTS (IEC 62027:2011)
    IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
    IEC 60364-4-42:2010+AMD1:2014 CSV Low-voltage electrical installations - Part 4-42: Protection forsafety - Protection against thermal effects
    EN 61180-2 : 1994 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - PART 2: TEST EQUIPMENT
    ISO 13849-1:2015 Safety of machinery Safety-related parts of control systems Part 1: General principles for design
    IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
    IEC 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
    IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    IEC 61800-5-2:2016 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
    EN 60034-5:2001/A1:2007 ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION
    IEC 60364-5-52:2009 Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
    EN 60309-1:1999/A1:2007/AC:2014 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999/A2:2012)
    IEC 61557-3:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective