• EN 60317-0-1:2014

    Current The latest, up-to-date edition.

    SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-1: GENERAL REQUIREMENTS - ENAMELLED ROUND COPPER WIRE

    Available format(s): 

    Language(s): 

    Published date:  17-01-2014

    Publisher:  European Committee for Standards - Electrical

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope
    2 Normative references
    3 Terms, definitions, general notes and appearance
    4 Dimensions
    5 Electrical resistance
    6 Elongation
    7 Springiness
    8 Flexibility and adherence
    9 Heat shock
    10 Cut-through
    11 Resistance to abrasion
    12 Resistance to solvents
    13 Breakdown voltage
    14 Continuity of insulation (nominal conductor diameters
       up to and including 1,600 mm)
    15 Temperature index
    16 Resistance to refrigerants
    17 Solderability
    18 Heat or solvent bonding
    19 Dielectric dissipation factor
    20 Resistance to transformer oil
    21 Loss of mass
    23 Pin hole test
    30 Packaging
    Annex A (informative) - Dimensions for intermediate nominal
            conductor diameters (R 40)
    Annex B (informative) - Method for the calculation of linear
            resistance
    Annex C (informative) - Resistance
    Bibliography
    Annex ZA (normative) - Normative references to international
             Publications with their corresponding
             European publications

    Abstract - (Show below) - (Hide below)

    IEC 60317-0-1:2013 specifies general requirements of enamelled round copper winding wires with or without bonding layer.

    General Product Information - (Show below) - (Hide below)

    Committee TC 55
    Development Note To be read in conjunction with EN 60851 (series). (10/2008) NEW CHILD AMD 1 2019 IS ADDED
    Document Type Standard
    Product Note NEW CHILD AMD 1 2019 IS ADDED
    Publisher European Committee for Standards - Electrical
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN 60317-0-6 : 2001 SPECIFICATION FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-6: GENERAL REQUIREMENTS - GLASS-FIBRE WOUND RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED ROUND COPPER WIRE
    CEI EN 60317-23 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 23: SOLDERABLE POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 180
    CEI EN 60317-55 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 55: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE OVERCOATED WITH POLYAMIDE, CLASS 180
    BS EN 60317-59 : 2016 SPECIFICATIONS FOR PARTICULAR TYPE OF WINDING WIRES - PART 59: POLYAMIDEIMIDE ENAMELED ROUND COPPER WIRE, CLASS 240
    CEI EN 60317-38 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 38: POLYESTER OR POLYESTERIMIDE OVERCOATED WITH POLYAMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 200, WITH A BONDING LAYER
    BS EN 60317-12 : 2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 12: POLYVINYL ACETAL ENAMELLED ROUND COPPER WIRE, CLASS 120
    CEI EN 60317-37 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 37: POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 180, WITH A BONDING LAYER
    CEI EN 60317-19 : 2000 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 19: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE OVERCOATED WITH POLYAMIDE, CLASS 130
    BS EN 60317-45:1998 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 45: POLYESTER ENAMELLED ROUND COPPER WIRE, CLASS 130
    CEI EN 60317-36 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 36: SOLDERABLE POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 180, WITH A BONDING LAYER
    UNE-EN 60317-57:2011 Specifications for particular types of winding wires -- Part 57: Polyamide-imide enamelled round copper wire, class 220
    BS EN 60317-26 : 1997 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 26: POLYAMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 200
    BS EN 60317-0-7 : 2017 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-7: GENERAL REQUIREMENTS - FULLY INSULATED (FIW) ZERO-DEFECT ENAMELLED ROUND COPPER WIRE (IEC 60317-0-7:2017)
    I.S. EN 60317-57:2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 57: POLYAMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 220
    CEI EN 60317-12 : 2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 12: POLYVINYL ACETAL ENAMELLED ROUND COPPER WIRE, CLASS 120
    CEI EN 60317-35 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 35: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 155, WITH A BONDING LAYER
    BS EN 60317-51 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 51: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 180
    CEI EN 61347-1 : 2016 LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
    CEI EN 60317-13 : 2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 13: POLYESTER OR POLYESTERIMIDE OVERCOATED WITH POLYAMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 200
    BS EN 60317-42 : 1997 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 42: POLYESTER-AMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 200
    BS EN 60317-0-9 : 2015 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-9: GENERAL REQUIREMENTS - ENAMELLED RECTANGULAR ALUMINIUM WIRE
    BS EN 60317-46 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 46: AROMATIC POLYIMIDE ENAMELED ROUND COPPER WIRE, CLASS 240
    BS EN 60317-57 : 2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 57: POLYAMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 220
    BS EN 60317-34:1997 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 34: POLYESTER ENAMELLED ROUND COPPER WIRE, CLASS 130 L
    BS EN 60317-13 : 2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 13: POLYESTER OR POLYESTERIMIDE OVERCOATED WITH POLYAMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 200
    CEI EN 60317-20 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 20: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 155
    UNE-EN 60317-55:2014 Specifications for particular types of winding wires - Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, Class 180
    I.S. EN 60317-26:1998 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 26: POLYAMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 200
    BS EN 60317-4 : 1995 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 4: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 130
    CEI EN 60317-57 : 2011 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 57: POLYAMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 220
    BS EN 60317-30:1997 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 30: POLYIMIDE ENAMELLED RECTANGULAR COPPER WIRE, CLASS 220
    UNE-EN 60317-59:2016 Specifications for particular type of winding wires - Part 59: Polyamideimide enameled round copper wire, class 240
    CEI EN 60317-51 : 2015 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 51: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 180
    I.S. EN 60317-13:2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 13: POLYESTER OR POLYESTERIMIDE OVERCOATED WITH POLYAMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 200
    I.S. EN 60317-30:1998 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 30: POLYIMIDE ENAMELLED RECTANGULAR COPPER WIRE, CLASS 220
    I.S. EN 60317-1:1996 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 1: POLYVINYL ACETAL ENAMELLED ROUND COPPER WIRE, CLASS 105
    EN 60317-0-7:2017 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-7: GENERAL REQUIREMENTS - FULLY INSULATED (FIW) ZERO-DEFECT ENAMELLED ROUND COPPER WIRE (IEC 60317-0-7:2017)
    I.S. EN 60317-51:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 51: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 180
    I.S. EN 60317-4:1996 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 4: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 130
    I.S. EN 60317-42:1998 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 42: POLYESTER-AMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 200
    CEI EN 60317-8 : 2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 8: POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 180
    I.S. EN 60317-45:1999 SPECIFICATIONS FOR PARTICULAR TYPE OF WINDING WIRES - PART 45: POLYESTER ENAMELLED ROUND COPPER WIRE, CLASS 130
    I.S. EN 61347-1:2015 LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
    CEI EN 60317-46 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 46: AROMATIC POLYIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 240
    UNE-EN 60317-0-9:2016 Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire
    I.S. EN 60317-12:2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 12: POLYVINYL ACETAL ENAMELLED ROUND COPPER WIRE, CLASS 120
    CEI EN 60317-0-7 : 2012 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-7: GENERAL REQUIREMENTS - FULLY INSULATED (FIW) ZERODEFECT ENAMELLED ROUND COPPER WIRE
    CEI EN 60317-21 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 21: SOLDERABLE POLYURETHANE EN AMELLED ROUND COPPER WIRE OVERCOATED WITH POLYAMIDE, CLASS 155
    I.S. EN 60669-2-1:2004 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-1: PARTICULAR REQUIREMENTS - ELECTRONIC SWITCHES
    UNE-EN 60317-0-7:2012 Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600 mm
    BS EN 60317-55 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 55: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE OVERCOATED WITH POLYAMIDE, CLASS 180
    I.S. EN 60317-0-7:2017 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-7: GENERAL REQUIREMENTS - FULLY INSULATED (FIW) ZERO-DEFECT ENAMELLED ROUND COPPER WIRE
    I.S. EN 60317-0-9:2015 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-9: GENERAL REQUIREMENTS - ENAMELLED RECTANGULAR ALUMINIUM WIRE
    I.S. EN 60317-55:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 55: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE OVERCOATED WITH POLYAMIDE, CLASS 180
    I.S. EN 60317-46:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 46: AROMATIC POLYIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 240
    I.S. EN 60317-59:2016 SPECIFICATIONS FOR PARTICULAR TYPE OF WINDING WIRES - PART 59: POLYAMIDEIMIDE ENAMELED ROUND COPPER WIRE, CLASS 240
    I.S. EN 60317-20:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 20: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 155
    I.S. EN 60317-23:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 23: SOLDERABLE POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 180
    I.S. EN 60317-21:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 21: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE OVERCOATED WITH POLYAMIDE, CLASS 155
    UNE-EN 60317-51:2014 Specifications for particular types of winding wires - Part 51: Solderable polyurethane enamelled round copper wire, class 180
    UNE-EN 60317-37:2014 Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer
    BS EN 60317-21 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 21: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE OVERCOATED WITH POLYAMIDE, CLASS 155
    UNE-EN 60317-38:2014 Specifications for particular types of winding wires - Part 38: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200, with a bonding layer
    BS EN 60317-20 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 20: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 155
    BS EN 60317-11:2000 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 11: BUNCHED SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRES, CLASS 130, WITH SILK COVERING
    UNE-EN 61347-1:2016 Lamp controlgear - Part 1: General and safety requirements
    BS EN 60317-19 : 1996 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 19: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE OVERCOATED WITH POLYAMIDE, CLASS 130
    UNE-EN 60317-46:2014 Specifications for particular types of winding wires - Part 46: Aromatic polyimide enamelled round copper wire, class 240
    BS EN 60317-23 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 23: SOLDERABLE POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 180
    BS EN 60317-37 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 37: POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 180, WITH A BONDING LAYER
    BS EN 60317-38 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 38: POLYESTER OR POLYESTERIMIDE OVERCOATED WITH POLYAMIDE-IMIDE, ENAMELLED ROUND COPPER WIRE, CLASS 200, WITH A BONDING LAYER
    BS EN 61347-1:2015 (published 2015-06) Lamp controlgear General and safety requirements
    BS EN 60317-2 : 2012 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 2: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 130, WITH A BONDING LAYER
    BS EN 60317-36 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 36: SOLDERABLE POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 180, WITH A BONDING LAYER
    BS EN 60317-22 : 2004 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 22: POLYESTER OR POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE OVERCOATED WITH POLYAMIDE, CLASS 180
    BS EN 60317-8 : 2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 8: POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 180
    UNE-EN 60317-20:2014 Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155
    UNE-EN 60317-23:2014 Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180
    BS EN 60317-35 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 35: SOLDERABLE POLYURETHANE ENAMELED ROUND COPPER WIRE, CLASS 155, WITH A BONDING LAYER
    BS EN 60669-2-1 : 2004 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-1: PARTICULAR REQUIREMENTS - ELECTRONIC SWITCHES
    EN 60317-0-6:2001/A1:2006 SPECIFICATION FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-6: GENERAL REQUIREMENTS - GLASS-FIBRE WOUND RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED ROUND COPPER WIRE
    EN 60317-12:2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 12: POLYVINYL ACETAL ENAMELLED ROUND COPPER WIRE, CLASS 120
    I.S. EN 60317-38:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 38: POLYESTER OR POLYESTERIMIDE OVERCOATED WITH POLYAMIDE-IMIDE, ENAMELLED ROUND COPPER WIRE, CLASS 200, WITH A BONDING LAYER
    I.S. EN 60317-3:1996 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 3: POLYESTER ENAMELLED ROUND COPPER WIRE, CLASS 155
    I.S. EN 60317-7:1996 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 7: POLYIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 220
    I.S. EN 60317-36:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 36: SOLDERABLE POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 180, WITH A BONDING LAYER
    I.S. EN 60317-8:2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 8: POLYESTERIMIDE ENAMELED ROUND COPPER WIRE, CLASS 180
    I.S. EN 60317-37:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 37: POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 180, WITH A BONDING LAYER
    I.S. EN 60317-11:1995 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 11: BUNCHED SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRES, CLASS 130, WITH SILK COVERING
    I.S. EN 60317-35:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 35: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 155, WITH A BONDING LAYER
    EN 61347-1:2015 LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS (IEC 61347-1:2015)
    I.S. EN 60317-2:2012 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 2: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 130, WITH A BONDING LAYER (IEC 60317-2:2012 (EQV))
    EN 60317-20:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 20: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 155 (IEC 60317-20:2013)
    EN 60317-21:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 21: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE OVERCOATED WITH POLYAMIDE, CLASS 155 (IEC 60317-21:2013)
    EN 60317-36:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 36: SOLDERABLE POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 180, WITH A BONDING LAYER (IEC 60317-36:2013)
    EN 60317-51:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 51: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 180 (IEC 60317-51:2014)
    EN 60317-26:1996/A2:2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 26: POLYAMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 200
    EN 60317-8:2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 8: POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 180
    EN 60317-13:2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 13: POLYESTER OR POLYESTERIMIDE OVERCOATED WITH POLYAMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 200
    EN 60317-7:1994/A2:1998 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 7: POLYIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 220
    EN 60317-35:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 35: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 155, WITH A BONDING LAYER (IEC 60317-35:2013)
    EN 60317-42:1997/A1:2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 42: POLYESTER-AMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 200
    EN 60317-2:2012 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 2: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 130, WITH A BONDING LAYER (IEC 60317-2:2012)
    EN 60317-0-9 : 2015 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-9: GENERAL REQUIREMENTS - ENAMELLED RECTANGULAR ALUMINIUM WIRE (IEC 60317-0-9:2015)
    EN 60317-59 : 2016 Specifications for particular type of winding wires - Part 59: Polyamideimide enameled round copper wire, class 240
    EN 60317-19:1995/A2:2000 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 19: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE OVERCOATED WITH POLYAMIDE, CLASS 130
    EN 60317-38:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 38: POLYESTER OR POLYESTERIMIDE OVERCOATED WITH POLYAMIDE-IMIDE, ENAMELLED ROUND COPPER WIRE, CLASS 200, WITH A BONDING LAYER
    EN 60317-37:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 37: POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 180, WITH A BONDING LAYER (IEC 60317-37:2013)
    EN 60317-22:2004/A1:2010 Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
    EN 60317-23:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 23: SOLDERABLE POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 180 (IEC 60317-23:2013)
    EN 60317-46:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 46: AROMATIC POLYIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 240 (IEC 60317-46:2013)
    EN 60317-55:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 55: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE OVERCOATED WITH POLYAMIDE, CLASS 180 (IEC 60317-55:2013)
    EN 60317-57 : 2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 57: POLYAMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 220
    EN 60317-30:1996/A2:2005 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 30: POLYIMIDE ENAMELLED RECTANGULAR COPPER WIRE, CLASS 220
    EN 60317-4:1994/A2:2000 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 4: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 130
    EN 60317-3 : 94 AMD 1 98 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 3: POLYESTER ENAMELLED ROUND COPPER WIRE, CLASS 155

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 3:1973 Preferred numbers Series of preferred numbers
    IEC 60172:2015 Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
    EN 60172:2015 TEST PROCEDURE FOR THE DETERMINATION OF THE TEMPERATURE INDEX OF ENAMELLED AND TAPE WRAPPED WINDING WIRES (IEC 60172:2015)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective