EN 61241-4:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Electrical apparatus for use in the presence of combustible dust - Part 4: Type of protection "pD"
01-12-2014
19-12-2006
FOREWORD
1 Scope
2 Normative references
3 Definitions
4 Pressurization principle
4.1 Protective gas
4.2 Automatic disconnection
4.3 Cleaning
4.4 Discharge of protective gas
5 General constructional requirements
5.1 Electrical performance of apparatus
5.2 Mechanical strength
5.3 Apertures
5.4 Electrical connections to enclosures
5.5 Doors and covers
6 Temperature limits
7 Safety provisions and safety devices (except for static
pressurization)
7.1 General
7.2 Pressure- or flow-activated devices
7.3 Electrical supply
7.4 Switching off electrical supply
7.5 Failure of pressurization
7.6 Level of overpressure
7.7 Possible sources of ignition
7.8 Enclosed components
7.9 Separate enclosures
8 Safety provisions and safety devices for static pressurization
9 Supply of protective gas
9.1 Type of gas
9.2 Second source of supply
9.3 Temperature
10 Verification and tests
10.1 General
10.2 Type verification and tests
10.3 Overpressure test
10.4 Minimum overpressure test
10.5 Leakage test
10.6 Impact test
10.7 Routine tests
11 Marking
11.1 Pressurized enclosure
11.2 Additional marking
11.3 Pressurized enclosures protected by static pressurization
11.4 Any other marking required
Annex A (normative) Ducts for protective gas supply
Annex B (normative) Installation requirements for pressurization
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
Annex ZZ (informative) Coverage of Essential Requirements of
EC Directives
Gives requirements on the design, construction, testing and marking of electrical apparatus for use in combustible dust atmospheres in which a protective gas (air or inert gas), maintained at a pressure above that of the external atmosphere, is used to prevent the entry of dust which might otherwise lead to the formation of a combustible mixture within enclosures which do not contain a source of combustible dust.
Committee |
CLC/TC 31
|
DevelopmentNote |
To be read in conjunction with EN 61241-0. (02/2007)
|
DocumentType |
Standard
|
PublisherName |
European Committee for Standards - Electrical
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NF EN 61241-4 : 2007 | Identical |
BS EN 61241-4:2006 | Identical |
PN EN 61241-4 : 2007 | Identical |
UNE-EN 61241-4:2007 | Identical |
SN EN 61241-4 : 2007 | Identical |
NEN EN IEC 61241-4 : 2007 | Identical |
DIN EN 61241-4 : 2007 | Identical |
IEC 61241-4:2001 | Identical |
NBN EN 61241-4 : 2007 | Identical |
CEI EN 61241-4 : 2007 | Identical |
I.S. EN 61241-4:2007 | Identical |
BS EN 62453-301:2009 | Identical |
UNE-EN 60079-17:2014 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
I.S. EN 60079-0:2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD)) |
12/30270980 DC : 0 | BS EN 1127-2 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
BS EN 60079-19 : 2011 | EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION |
EN 60079-19:2011/A1:2015 | EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION (IEC 60079-19:2010) |
UNE-EN 1127-1:2012 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
BS EN 60079-17:2014 | Explosive atmospheres Electrical installations inspection and maintenance |
BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
BS EN 1127-1:2011 | Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology |
DIN EN 1127-1:2011-10 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
CEI EN 60079-17 : 2015 | EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE |
UNI EN 1127-1 : 2011 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
I.S. EN 60079-17:2014 | EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE |
BS EN 1127-1:2019 | Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology |
UNE-EN 60079-14:2016 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
UNE-EN 60079-0:2013 | Explosive atmospheres - Part 0: Equipment - General requirements |
PREN 1127-2 : DRAFT 2012 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
I.S. EN 1127-1:2011 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
UNE-EN 60079-19:2011 | Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation |
EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
EN 60079-17:2014 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
EN 60034-1:2010/corrigendum Oct. 2010 | ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE |
IEC 61241-1-1:1999 | Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus |
IEC 61241-3:1997 | Electrical apparatus for use in the presence of combustible dust - Part 3: Classification of areas where combustible dust are or may be present |
IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
IEC 61241-1-2:1999 | Electrical apparatus for use in the presence of combustible dust - Part 1-2: Electrical apparatus protected by enclosures and surface temperature limitation - Selection, installation and maintenance |
1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.