EN 61300-2-17:2011
Current
Current
The latest, up-to-date edition.
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold
Published date
18-03-2011
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 General description
4 Apparatus
5 Procedure
6 Severity
7 Details to be specified
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
IEC 61300-2-17:2010 details a procedure for determining the suitability of a fibre optic device to withstand environmental conditions of extended low temperature (cold), which may occur in use, storage and/or transport. This procedure does not assess the ability of a device to operate during temperature variations; in this case, IEC 61300-2-22 would be used. The main changes with respect to the previous edition are: - Procedure and details to be specified were reconsidered; - The deviation of the temperature in severity was changed ± 3 °C to ± 2 °C.
| Committee |
CLC/TC 86BXA
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| IEC 61300-2-17:2010 | Identical |
| NF EN 61300-2-17 : 2011 | Identical |
| NBN EN 61300 2-17 : 2011 | Identical |
| I.S. EN 61300-2-17:2011 | Identical |
| PN EN 61300-2-17 : 2011 | Identical |
| SN EN 61300-2-17 : 1997 | Identical |
| UNE-EN 61300-2-17:2011 | Identical |
| BS EN 61300-2-17:2003 | Identical |
| CEI EN 61300-2-17 : 2012 | Identical |
| DIN EN 61300-2-17:2011-08 | Identical |
| BS EN IEC 62228-1:2018 | Identical |
| NEN EN IEC 61300-2-17 : 2011 | Identical |
| BS EN 61300-2-17:2011 | Identical |
| 10/30240333 DC : 0 | BS EN 50411-3-6 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-6: MULTIMODE MECHANICAL FIBRE SPLICE |
| CEI EN 50377-8-8 : 2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-8: LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| CEI EN 50378-3-1 : 2008 | PASSIVE COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE: 100/200 GHZ DWDM MODULE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE |
| CEI EN 50377-8-3 : 2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-3: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY C |
| CEI EN 50377-8-13 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-13: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| BS EN 50377-5-1:2003 | Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type EC terminated on IEC 60793-2 category B.1.1 singlemode fibre |
| BS EN 61753-381-6:2016 | Fibre optic interconnecting devices and passive components. Performance standard Cyclic arrayed waveguide grating. Category O (uncontrolled environment) |
| CEI EN 61753-021-2 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 021-2: GRADE C/3 SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| CEI EN 61753-2-1 : 2001 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 2-1: FIBRE OPTIC CONNECTORS TERMINATED ON SINGLE-MODE FIBRE FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| 10/30216926 DC : 0 | BS EN 50411-3-3 - FIRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATION - PART 3-3: SINGLEMODE OPTICAL FIBRE FUSION SPLICE PROTECTORS |
| I.S. EN 61753-053-2:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 053-2: NON-CONNECTORIZED SINGLE-MODE FIBRE, ELECTRICALLY CONTROLLED, VARIABLE OPTICAL ATTENUATOR FOR CATEGORY C - CONTROLLED ENVIRONMENTS |
| 06/30155038 DC : DRAFT AUG 2006 | EN 50377-8-5 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-5: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY U |
| BS EN 61753-053-2:2014 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C. Controlled environments |
| 05/30128969 DC : 0 | EN 50377-4-4 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-4: TYPE SC-PC SIMPLEX TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| BS EN 61753-381-2:2016 | Fibre optic interconnecting devices and passive components. Performance standard Cyclic arrayed waveguide grating. Category C (controlled environment) |
| BS EN 50377-16-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LF3 APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C |
| I.S. EN 50411-3-6:2013 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-6: MULTIMODE MECHANICAL FIBRE SPLICE FOR USE IN AN OUTDOOR PROTECTED ENVIRONMENT (CAT U) |
| UNE-EN 50377-4-2:2015 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| CEI EN 61753-021-3 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 021-3: SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| BS EN 61753-101-2:2006 | Fibre optic interconnecting devices and passive components performance standard Fibre management systems for category C. Controlled environment |
| BS EN 50377-9-1:2003 | Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MT-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| BS EN 61753-089-2:2013 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C. Controlled environment |
| BS EN 62664-1-1:2013 | Fibre optic interconnecting devices and passive components. Fibre optic connector product specifications LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre |
| 08/30189758 DC : DRAFT SEP 2008 | BS EN 50377-13-3 - CONNECTORS SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-3: TYPE LX.5-APC DUPLEX TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 50377-16-1:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 16-1: TYPE LF3 APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| CEI EN 62664-1-1 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR PRODUCT SPECIFICATIONS - PART 1-1: LC-PC DUPLEX MULTI MODE CONNECTORS TERMINATED ON IEC 60793-2 CATEGORY A1A FIBRE |
| NF EN 50377-15-1 : 2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
| BS EN 61753-031-2:2014 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices for Category C. Controlled environment |
| 08/30195627 DC : 0 | BS EN 50377-8-12 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-12: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| 08/30195624 DC : 0 | BS EN 50377-8-11 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-11: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| 07/30163785 DC : 0 | BS EN 50377-3-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C |
| I.S. EN 61753-031-3:2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 031-3: NON-CONNECTORIZED SINGLEMODE 1N AND 2N NON-WAVELENGTH-SELECTIVE BRANCHING DEVICES FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| 06/30156211 DC : DRAFT SEP 2006 | BS EN 50377-10-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 10-1: TYPE MU-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C |
| CEI EN 61753-101-3 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-3: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| 03/311586 DC : DRAFT JULY 2003 | EN 50377-6-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 6-2: TYPE SC-RJ TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| 06/30154747 DC : 0 | EN 50377-2-2 - PRODUCT SPECIFICATION FOR CONNECTORS ADAPTORS AND PATCHCORDS TO BE USED IN SINGLE MODE OPTICAL FIBRE COMMUNICATION SYSTEMS - PART 2-2 - TYPE FC/APC 8 TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE, ZIRCONIA FERRULE, FOR CATEGORY C |
| BS EN 61753-083-2:2008 | Fibre optic interconnecting devices and passive components performance standard Non-connectorised single-mode fibre optic C-band/L-band WDM devices for category C. Controlled environment |
| 06/30156214 DC : DRAFT SEP 2006 | BS EN 50377-8-9 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-9: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| CEI EN 61753-057-2 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 057-2: SINGLE MODE FIBRE PLUG-RECPTACLE STYLE OPTICAL FUSE FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| 08/30195621 DC : 0 | BS EN 50377-8-10 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-10: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| CEI EN 50378-3-2 : 2008 | PASSIVE COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-2: TYPE 4/8 CHANNEL CWDM MODULE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE |
| CEI EN 50377-13-3 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-3: TYPE LX.5-APC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 62149-5:2011 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 5: ATM-PON TRANSCEIVERS WITH LD DRIVER AND CDR ICS |
| I.S. EN 61753-091-3:2004 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 091-3: SINGLE-MODE FIBRE OPTIC PIGTAILED STYLE CIRCULATORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| I.S. EN 62005-9-1:2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - RELIABILITY - PART 9-1: QUALIFICATION OF PASSIVE OPTICAL COMPONENTS |
| I.S. EN 50377-7-1:2004 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-1: TYPE LC-PC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY A1A AND A1B MULTIMODE FIBRE |
| I.S. EN 61753-056-2:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 056-2: SINGLE MODE FIBRE PIGTAILED STYLE OPTICAL FUSE FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-056-2:2012 (EQV)) |
| I.S. EN 61753-041-2:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 041-2: NON-CONNECTORIZED SINGLE-MODE OTDR REFLECTING DEVICE FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61753-141-2:2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 141-2: FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATOR USING SINGLE-MODE DISPERSION COMPENSATING FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENTS |
| I.S. EN 61753-061-3:2004 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 061-3: SINGLE MODE FIBRE OPTIC PIGTAILED STYLE ISOLATORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| I.S. EN 62149-1:2012 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 1: GENERAL AND GUIDANCE (IEC 61753-059-2:201X (86B/3338/CDV) (EQV) + IEC 62149-1:2011 (EQV)) |
| I.S. EN 61753-022-2:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 022-2: FIBRE OPTIC CONNECTORS TERMINATED ON MULTIMODE FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-022-2:2012 (EQV)) |
| I.S. EN 50377-8-3:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-3: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY C |
| CEI EN 50377-3-1 : 2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C |
| BS EN 50377-3-1:2008 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SG terminated on IEC 60793-2-10 category A1a, A1b or equivalent multimode fibre for category C |
| I.S. EN 50377-4-2:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-2: TYPE SC/APC SIMPLEX 8 DEGREES TERMINATED ON IEC 60793-2-50 OF TYPES B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| NF EN 50377-2-2 : 2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: FC/APC 8 TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE, CATEGORY C |
| NF EN 50411-3-2 : 2011 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-2: SINGLEMODE MECHANICAL FIBRE SPLICE |
| UNE-EN 62005-9-1:2016 | Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical components |
| EN 50377-13-2:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 13-2: Type LX.5-PC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| EN 50377-17-2:2015 | Connector sets and Interconnect components to be used in optical fibre communication systems - Product specifications - Part 17-2: Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre and field mounted onto reinforced cable containing IEC 60793-2-50 category B1.3 or B6a1 or B6a 2 singlemode fibre (with restricted MFD), category C |
| EN 50377-7-1:2004 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-1: Type LC-PC duplex terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| EN 61753-021-2:2008 | Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment |
| EN 50377-9-2:2004 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 9-2: Type MT-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre |
| EN 50377-2-2:2009 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 2-2: FC/APC 8 terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule, category C |
| EN 50377-8-4:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-4: LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U |
| EN 61753-143-2:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C - Controlled environment |
| EN 62149-1:2012 | Fibre optic active components and devices - Performance standards - Part 1: General and guidance |
| EN 50377-4-2:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| EN 50377-8-10:2010 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-10: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C |
| EN 61753-031-3:2015 | Fibre optic interconnecting devices and passive components - Performance standard - Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category U - Uncontrolled environment |
| EN 61753-141-2:2011 | Fibre optic interconnecting devices and passive components - Performance standard - Part 141-2: Fibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C - Controlled environments |
| EN 61753-131-3:2011 | Fibre optic interconnecting devices and passive components - Performance standard - Part 131-3: Single-mode mechanical fibre splice for category U - Uncontrolled environment |
| EN 61753-056-2:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 056-2: Single mode fibre pigtailed style optical fuse for category C - Controlled environment |
| EN 50377-8-9:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-9: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| EN 61753-053-3:2004 | Fibre optic interconnecting devices and passive components performance standard - Part 053-3: Continuously variable attenuators for category U - Uncontrolled environment |
| EN 50516-2-1:2011 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| EN 50377-11-1:2008 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 11-1: Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C |
| EN 61753-057-2:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 057-2: Single mode fibre plug-receptacle style optical fuse for category C - Controlled environment |
| EN 61753-059-2:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 059-2: Single-mode fibre plug-receptacle style optical limiter for category C - Controlled environment |
| EN 61753-021-3:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled environment |
| EN 50411-3-6:2013 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-6: Multimode mechanical fibre splice for use in an outdoor protected environment (Cat U) |
| EN 61753-031-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 031-2: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category C - Controlled environment |
| EN 61753-382-2:2016 | Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2: Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C - Controlled environment |
| EN 61753-084-2:2008 | Fibre optic interconnecting devices and passive components performance standard - Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Controlled environment |
| EN 61753-101-3:2008 | Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for Category U - Uncontrolled environment |
| EN 50377-13-3:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 13-3: Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| EN 50377-5-1:2003 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 5-1: Type EC terminated on IEC 60793-2 category B1.1 singlemode fibre |
| EN 61753-051-3:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 051-3: Single-mode fibre, plug style fixed attenuators for category U - Uncontrolled environment |
| EN 61753-022-2:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment |
| EN 61753-052-3:2016 | Fibre optic interconnecting devices and passive components - Performance standard - Part 052-3: Single-mode fibre non-connectorized fixed attenuator - Category U in uncontrolled environment |
| EN 61753-086-2:2009 | Fibre optic interconnecting devices and passive components performance standard - Part 086-2: Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C - Controlled environment |
| EN 50377-10-2:2005 | Connectors sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 10-2: MU-APC singlemode terminated on IEC 60793-2 category B1 fibre |
| EN 50411-3-2:2011 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-2: Singlemode mechanical fibre splice |
| EN 50377-7-3:2004 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-3: Type LC-APC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre |
| EN 61753-091-3:2004 | Fibre optic interconnecting devices and passive components performance standard - Part 091-3: Single-mode fibre optic pigtailed style circulators for category U - Uncontrolled environment |
| EN 50377-8-7:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-7: LSH-PC terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C |
| EN 50377-15-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 15-1: Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre |
| BS EN 61753-071-2:2014 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorised single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C. Controlled environments |
| CEI EN 50377-8-9 : 2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-9: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| 08/30190093 DC : DRAFT SEP 2008 | BS EN 50377-7-4 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-4: LC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH FULL ZIRCONIA FERRULE FOR CATEGORY C |
| BS EN 61753-057-2:2013 | Fibre optic interconnecting devices and passive components. Performance standard Single mode fibre plug-receptacle style optical fuse for category C. Controlled environment |
| I.S. EN 50377-10-1:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 10-1: TYPE MU-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C |
| BS EN 50377-17-1:2013 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre and field mounted onto IEC 60793-2-50 category B1.3 or B6a_1 or B6a_2 singlemode fibre, category C |
| I.S. EN 50377-2-2:2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: FC/APC 8 TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE, CATEGORY C |
| I.S. EN 50411-3-2:2011 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-2: SINGLEMODE MECHANICAL FIBRE SPLICE |
| 02/210340 DC : DRAFT JAN 2003 | EN 50377-9-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 9-2: TYPE MT-RJ TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| BS EN 62005-9-1:2015 | Fibre optic interconnecting devices and passive components. Reliability Qualification of passive optical components |
| BS EN 50411-3-3:2011 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Singlemode optical fibre fusion splice protectors |
| BS EN 50377-9-2:2004 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MT-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre |
| BS EN 50377-8-12:2010 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U |
| BS EN 61753-382-2:2016 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C. Controlled environment |
| BS EN 61753-143-2:2013 | Fibre optic interconnecting devices and passive components. Performance standard Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C. Controlled environment |
| BS EN 61753-101-3:2009 | Fibre optic interconnecting devices and passive components performance standard Fibre management systems for category U. Uncontrolled environment |
| BS EN 50411-3-2:2011 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Singlemode mechanical fibre splice |
| BS EN 61753-053-3:2004 | Fibre optic interconnecting devices and passive components performance standard Continuously variable attenuators for category U - Uncontrolled environment |
| BS EN 61753-041-2:2014 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode OTDR reflecting device for category C. Controlled environment |
| CEI EN 50411-3-3 : 2012 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-3: SINGLEMODE OPTICAL FIBRE FUSION SPLICE PROTECTORS |
| BS EN 50377-11-1:2008 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C |
| BS EN 50377-4-4:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| BS EN 50377-8-9:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| BS EN 50377-4-2:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| BS EN 50377-10-1:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MU-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C |
| BS EN 61753-031-3:2015 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category U. Uncontrolled environment |
| CEI EN 61753-087-2 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| 08/30189753 DC : DRAFT SEP 2008 | BS EN 50377-13-2 - CONNECTORS SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-2: TYPE LX.5-PC DUPLEX TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| CEI EN 61753-131-3 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 131-3: SINGLEMODE MECHANICAL FIBRE SPLICE FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| CEI EN 50377-2-2 : 2010 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: FC/APC 8 TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE, CATEGORY C |
| CEI EN 61753-1 : 2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 1: GENERAL AND GUIDANCE FOR PERFORMANCE STANDARDS |
| I.S. EN 61753-086-2:2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 086-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1490/1550 NM DOWNSTREAM 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61753-2-1:2000 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 2-1: FIBRE OPTIC CONNECTORS TERMINATED ON SINGLE-MODE FIBRE FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| I.S. EN 61753-071-2:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 071-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC 1 X 2 AND 2 X 2 SPATIAL SWITCHES FOR CATEGORY C - CONTROLLED ENVIRONMENTS |
| CEI EN 61753-083-2 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 083-2: NON-CONNECTORISED SINGLE-MODE FIBRE OPTIC C-BAND/L-BAND WDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 50377-7-3:2004 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-3: TYPE LC-APC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| I.S. EN 61753-031-2:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 031-2: NON-CONNECTORIZED SINGLE-MODE 1XN AND 2XN NON-WAVELENGTH-SELECTIVE BRANCHING DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 50377-8-6:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-6: LSH-HR SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C |
| CEI EN 50377-8-4 : 2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-4: LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY U |
| I.S. EN 61753-1:2007 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 1: GENERAL AND GUIDANCE FOR PERFORMANCE STANDARDS |
| I.S. EN 50411-3-3:2011 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-3: SINGLEMODE OPTICAL FIBRE FUSION SPLICE PROTECTORS |
| I.S. EN 62664-1-1:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR PRODUCT SPECIFICATIONS - PART 1-1: LC-PC DUPLEX MULTIMODE CONNECTORS TERMINATED ON IEC 60793-2-10 CATEGORY A1A FIBRE (IEC 62664-1-1:2013 (EQV)) |
| CEI EN 61753-143-2 : 2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 143-2: OPTICAL PASSIVE VIPA-BASED DISPERSION COMPENSATOR OF SINGLE-MODE FIBRE TRANSMISSION FOR CATEGORY C - CONTROLLED ENVIRONMENTS |
| CEI EN 50377-8-6 : 2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-6: LSH-HR SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C |
| CEI EN 50411-3-6 : 2014 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-6: MULTIMODE MECHANICAL FIBRE SPLICE FOR USE IN AN OUTDOOR PROTECTED ENVIRONMENT (CAT U) |
| 08/30195630 DC : 0 | BS EN 50377-8-13 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-13: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| BS EN 50516-2-1:2011 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type ODVA PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3 |
| I.S. EN 61753-052-3:2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 052-3: SINGLE-MODE FIBRE NONCONNECTORIZED FIXED ATTENUATOR - CATEGORY U IN UNCONTROLLED ENVIRONMENT |
| I.S. EN 50377-8-7:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-7: LSH-PC TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C |
| BS EN 50516-1-1:2011 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC 61753-1-3 |
| BS EN 61753-051-3:2013 | Fibre optic interconnecting devices and passive components. Performance standard Single-mode fibre, plug style fixed attenuators for category U. Uncontrolled environment |
| CEI EN 50377-16-1 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 16-1: TYPE LF3 APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| CEI EN 50516-1-1 : 2012 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3 |
| BS EN 61753-081-2:2014 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C. Controlled environments |
| BS EN 50377-8-6:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-HR simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C |
| 02/210337 DC : DRAFT JAN 2003 | EN 50377-7-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-2: LC-PC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| I.S. EN 50377-9-1:2003 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 9-1: TYPE MT-RJ TERMINATED ON IEC 60793-2 CATEGORY A1A AND A1B MULTIMODE FIBRE |
| BS EN 61753-086-2:2009 | Fibre optic interconnecting devices and passive components performance standard Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C. Controlled environment |
| BS EN 50377-8-8:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| 02/210338 DC : DRAFT JAN 2003 | EN 50377-7-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-1: TYPE LC-PC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY A1A AND A1B MULTIMODE FIBRE |
| BS EN 50377-13-3:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| 02/210339 DC : DRAFT JAN 2003 | EN 50377-7-3 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-3: TYPE LC-APC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| BS EN 50377-7-2:2004 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LC-PC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre |
| 14/30285749 DC : 0 | BS EN 50377-17-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-2: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO TIGHT JACKET CABLE CONTAINING IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A 2 SIN |
| BS EN 50377-8-10:2010 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C |
| 06/30155057 DC : DRAFT AUG 2006 | EN 50377-8-7 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-7: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C |
| BS EN 50377-6-1:2002 | Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SC-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| BS EN 50377-8-11:2010 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C |
| 06/30155061 DC : DRAFT AUG 2006 | EN 50377-8-8 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-8: LSH-HR SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 50377-8-9:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-9: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| CEI EN 50377-8-11 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-11: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| BS EN 61753-052-3:2016 | Fibre optic interconnecting devices and passive components. Performance standard Single-mode fibre non-connectorized fixed attenuator. Category U in uncontrolled environment |
| 12/30262212 DC : 0 | BS EN 50516-3-1 - INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| BS EN 61753-059-2:2013 | Fibre optic interconnecting devices and passive components. Performance standard Single-mode fibre plug-receptacle style optical limiter for category C. Controlled environment |
| BS EN 50377-13-2:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LX.5-PC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| BS EN 61753-021-3:2013 | Fibre optic interconnecting devices and passive components. Performance standard Single-mode fibre optic connectors for category U. Uncontrolled environment |
| BS EN 50377-10-2:2005 | Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications MU/APC singlemode terminated on IEC 60793-2 category B1 fibre |
| CEI EN 61753-052-3 : 2004 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 052-3: SINGLE-MODE FIBRE NONCONNECTORIZED FIXED ATTENUATOR - CATEGORY U IN UNCONTROLLED ENVIRONMENT |
| BS EN 50516-3-1:2014 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3 |
| 01/637057 DC : DRAFT AUG 2001 | DRAFT EN 50173 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS |
| 08/30193101 DC : 0 | BS EN 50377-4-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-2: TYPE SC/APC SIMPLEX 8 DEGREE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| BS EN 61753-2-1:2001 | Fibre optic interconnecting devices and passive components performance standard. Fibre optic connectors terminated on single-mode fibre for category U Uncontrolled environment |
| I.S. EN 61753-051-3:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 051-3: SINGLE-MODE FIBRE, PLUG STYLE FIXED ATTENUATORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT (IEC 61753-051-3:2013 (EQV)) |
| CEI EN 50377-13-2 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-2: TYPE LX.5-PC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| CEI EN 50377-8-12 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-12: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| NF EN 50377-4-4 : 2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-4: TYPE SC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 50377-8-10:2010 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-10: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| CEI EN 50516-2-1 : 2012 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| BS EN 50173-1:2011 | Information technology. Generic cabling systems General requirements |
| I.S. EN 61753-081-2:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 081-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC MIDDLE-SCALE 1 X N DWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENTS |
| I.S. EN 61753-058-2:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 058-2: SINGLE MODE FIBRE PIGTAILED STYLE OPTICAL POWER LIMITER FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-058-2:2013 (EQV)) |
| I.S. EN 50377-11-1:2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 11-1: TYPE MF TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE FOR CATEGORY C |
| CEI EN 61753-141-2 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 141-2: FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATOR USING SINGLE-MODE DISPERSION COMPENSATING FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENTS |
| I.S. EN 61753-381-6:2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 381-6: CYCLIC ARRAYED WAVEGUIDE GRATING - CATEGORY O (UNCONTROLLED ENVIRONMENT) |
| I.S. EN 61753-088-2:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 088-2: NON-CONNECTORIZED SINGLE-MODE FIBRE OPTIC LAN WDM DEVICES WITH CHANNEL SPACING OF 800 GHZ FOR CATEGORY C - CONTROLLED ENVIRONMENTS (IEC 61753-088-2:2013 (EQV)) |
| CEI EN 61753-051-3 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 051-3: SINGLE-MODE FIBRE PLUG STYLE OPTICAL ATTENUATOR FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| CEI EN 61753-101-2 : 2007 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| EN 50173-1:2011 | Information technology - Generic cabling systems - Part 1: General requirements |
| I.S. EN 50516-1-1:2011 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3 |
| EN 62149-5:2011 | Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs |
| EN 61753-071-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments |
| EN 61753-042-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C - Controlled environments |
| EN 50377-9-1:2003 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 9-1: Type MT-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| I.S. EN 50377-6-2:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 6-2: SC-RJ SINGLE MODE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, CATEGORY U |
| BS EN 50377-7-4:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with full zirconia ferrule for category C |
| CEI EN 50377-8-7 : 2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-7: LSH-PC TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C |
| I.S. EN 50377-8-11:2010 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-11: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| I.S. EN 50377-8-2:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-2: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY C |
| I.S. EN 50377-7-4:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-4: LC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH FULL ZIRCONIA FERRULE FOR CATEGORY C |
| BS EN 50377-8-3:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C |
| I.S. EN 50377-9-2:2004 | CONNECTORS SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS; PART 9-2: TYPE MT-RJ TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| BS EN 61753-056-2:2013 | Fibre optic interconnecting devices and passive components. Performance standard Single mode fibre pigtailed style optical fuse for category C. Controlled environment |
| BS EN 61753-021-2:2008 | Fibre optic interconnecting devices and passive components performance standard Grade C/3 single-mode fibre optic connectors for category C. Controlled environment |
| CEI EN 61753-086-2 : 2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 086-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1490 / 1550 NM DOWNSTREAM 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| BS EN 50377-17-2:2015 | Connector sets and Interconnect components to be used in optical fibre communication systems. Product specifications Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre and field mounted onto reinforced cable containing IEC 60793-2-50 category B1.3 or B6a1 or B6a 2 singlemode fibre (with restricted MFD), category C |
| BS EN 61753-131-3:2011 | Fibre optic interconnecting devices and passive components. Performance standard Single-mode mechanical fibre splice for category U. Uncontrolled environment |
| BS EN 50377-8-5:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U |
| CEI EN 50377-8-10 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-10: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C |
| BS EN 50377-15-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre |
| I.S. EN 61753-101-3:2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-3: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| 06/30155051 DC : DRAFT AUG 2006 | EN 50377-8-6 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-6: LSH-HR SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY C |
| I.S. EN 50377-8-5:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-5: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY U |
| 06/30154767 DC : DRAFT AUG 2006 | EN 50377-8-4 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-4: LSH-HR SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY U |
| BS EN 61753-042-2:2014 | Fibre optic interconnecting devices and passive components. Performance standard Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C. Controlled environments |
| CEI EN 61753-056-2 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 056-2: SINGLE MODE FIBRE PIGTAILED STYLE OPTICAL FUSE FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| CEI EN 50377-8-5 : 2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-5: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY U |
| CEI EN 50377-15-1 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
| BS EN 50377-8-2:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C |
| BS EN 61753-058-2:2013 | Fibre optic interconnecting devices and passive components. Performance standard Single mode fibre pigtailed style optical power limiter for category C. Controlled environment |
| BS EN 61753-022-2:2013 | Fibre optic interconnecting devices and passive components. Performance standard Fibre optic connectors terminated on multimode fibre for category C. Controlled environment |
| CEI EN 62005-9-1 : 2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - RELIABILITY - PART 9-1: QUALIFICATION OF PASSIVE OPTICAL COMPONENTS |
| BS EN 50377-8-7:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-PC terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C |
| BS EN 50377-6-2:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications SC-RJ single mode terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, category U |
| BS EN 61753-087-2:2011 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C. Controlled environment |
| CEI EN 61753-084-2 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 084-2: NON CONNECTORISED SINGLE-MODE 980/1550 NM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| 06/30154764 DC : DRAFT AUG 2006 | EN 50377-8-3 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-3: LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY C |
| BS EN 61753-088-2:2013 | Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C. Controlled environments |
| BS EN 62149-5:2011 | Fibre optic active components and devices. Performance standards ATM-PON transceivers with LD driver and CDR ICs |
| 03/318339 DC : DRAFT NOV 2003 | EN 50377-10-2 - CONNECTORS SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 10-2: MU/APC |
| CEI EN 50173-1 : 2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| BS EN 61753-1:2007 | Fibre optic interconnecting devices and passive components performance standard General and guidance for performance standards |
| I.S. EN 61753-381-2:2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 381-2: CYCLIC ARRAYED WAVEGUIDE GRATING - CATEGORY C (CONTROLLED ENVIRONMENT) |
| CEI EN 50377-4-2 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-2: TYPE SC/APC SIMPLEX 8 DEGREES TERMINATED ON IEC 60793-2-50 OF TYPES B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| CEI EN 61753-058-2 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 058-2: SINGLE MODE FIBRE PIGTAILED STYLE OPTICAL POWER LIMITER FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| CEI EN 50516-3-1 : 2014 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| I.S. EN 61753-021-2:2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 021-2: GRADE C/3 SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 50377-17-2:2015 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-2: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO REINFORCED CABLE CONTAINING IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A2 SINGLEMODE FIBRE |
| I.S. EN 50377-13-3:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-3: TYPE LX.5-APC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 50377-13-2:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-2: TYPE LX.5-PC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 50516-2-1:2011 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| I.S. EN 50516-3-1:2014 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| CEI EN 61753-022-2 : 2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 022-2: FIBRE OPTIC CONNECTORS TERMINATED ON MULTIMODE FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 50377-7-2:2004 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-2: LC-PC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| I.S. EN 61753-057-2:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 057-2: SINGLE MODE FIBRE PLUG-RECEPTACLE STYLE OPTICAL FUSE FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-057-2:2012 (EQV)) |
| I.S. EN 61753-059-2:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 059-2: SINGLE-MODE FIBRE PLUG-RECEPTACLE STYLE OPTICAL LIMITER FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-059-2:2013 (EQV)) |
| I.S. EN 61753-042-2:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 042-2: PLUG-PIGTAIL-STYLE AND PLUG-RECEPTACLE-STYLE OTDR REFLECTING DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENTS |
| CEI EN 50377-8-2 : 2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-2: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY C |
| I.S. EN 61753-089-2:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 089-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL OTDR MONITORING WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-089-2:2013 (EQV)) |
| I.S. EN 61753-021-3:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 021-3: SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT (IEC 61753-021-3:2012 (EQV)) |
| CEI EN 50411-3-2 : 2012 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-2: SINGLEMODE MECHANICAL FIBRE SPLICE |
| CEI EN 50377-4-4 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-4: TYPE SC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 61753-131-3:2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 131-3: SINGLE-MODE MECHANICAL FIBRE SPLICE FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
| I.S. EN 50377-8-12:2010 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-12: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| EN 61753-083-2:2008 | Fibre optic interconnecting devices and passive components performance standard - Part 083-2: Non-connectorised single-mode fibre optic C-band/L-band WDM devices for category C - Controlled environment |
| EN 50377-8-12:2010 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-12: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U |
| I.S. EN 50377-8-4:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-4: LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY U |
| 05/30128960 DC : 0 | EN 50377-4-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-1: TYPE SC-PC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY A 1 A AND A L B MULTIMODE FIBRE |
| BS EN 50377-8-4:2007 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U |
| I.S. EN 50377-5-1:2003 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 5-1: TYPE EC TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| BS EN 50377-7-3:2004 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LC-APC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre |
| 02/210341 DC : DRAFT JAN 2003 | EN 50377-7-4 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-4: LC-PC SIMPLEX TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE |
| BS EN 50377-8-13:2010 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U |
| 06/30156204 DC : DRAFT SEP 2006 | BS EN 50378-3-1 - PASSIVE COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE: 100/200 GHZ DWDM MODULE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLE MODE FIBRE |
| I.S. EN 50173-1:2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 50377-8-13:2010 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-13: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U |
| CEI EN 50377-7-4 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-4: LC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH FULL ZIRCONIA FERRULE FOR CATEGORY C |
| 08/30185105 DC : DRAFT JULY 2008 | BS EN 50377-15-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
| BS EN 61753-141-2:2011 | Fibre optic interconnecting devices and passive components. Performance standard Fibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C. Controlled environments |
| BS EN 61753-061-3:2004 | Fibre optic interconnecting devices and passive components performance standard Single-mode fibre optic pigtailed style isolators for category U. Uncontrolled environment |
| BS EN 50377-2-2:2009 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications FC/APC 8 terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule, category C |
| BS EN 61753-091-3:2004 | Fibre optic interconnecting devices and passive components performance standards. Performance standard Single-mode fibre optic pigtailed style circulators for category U. - Uncontrolled environment |
| BS EN 50411-3-6:2013 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Multimode mechanical fibre splice for use in an outdoor protected environment (Cat U) |
| BS EN 50377-7-1:2004 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LC-PC duplex terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| BS EN 61753-084-2:2008 | Fibre optic interconnecting devices and passive components performance standard Non connectorised single-mode 980/1550 nm WWDM devices for category C. Controlled environment |
| 06/30154760 DC : DRAFT AUG 2006 | EN 50377-6-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 6-2: SC-RJ SINGLE MODE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 B1.3 SINGLE MODE FIBRE, CATEGORY U |
| CEI EN 50377-10-2 : 2006 | CONNECTORS SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 10-2: MU-APC SINGLEMODE TERMINATED ON IEC 60793-2 CATEGORY B1 FIBRE |
| 09/30197413 DC : 0 | BS EN 50411-3-2 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-2: SINGLEMODE MECHANICAL FIBRE SPLICE |
| CEI EN 50377-11-1 : 2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 11-1: TYPE MF TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE FOR CATEGORY C |
| CEI EN 62149-1 : 2012 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 1: GENERAL AND GUIDANCE |
| BS EN 62149-1:2012 | Fibre optic active components and devices. Performance standards General and guidance |
| 06/30154756 DC : DRAFT AUG 2006 | EN 50377-8-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-2: TYPE LSH-HRL TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, COMPOSITE FERRULE CATEGORY C |
| CEI EN 50377-17-1 : 2013 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-1: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A2 SINGLEMODE FIBRE, CATEGORY C |
| CEI EN 61753-089-2 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 089-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL OTDR MONITORING WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| CEI EN 62149-5 : 2012 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 5: ATM-PON TRANSCEIVERS WITH LD DRIVER AND CDR ICS |
| I.S. EN 61753-101-2:2006 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61753-084-2:2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 084-2: NON CONNECTORISED SINGLE-MODE 980/1550 NM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 50377-17-1:2013 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-1: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A2 SINGLEMODE FIBRE, CATEGORY C |
| I.S. EN 50377-8-8:2007 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-8: LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 50377-10-2:2005 | CONNECTORS SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 10-2: MU-APC SINGLEMODE TERMINATED ON IEC 60793-2 CATEGORY B1 FIBRE |
| CEI EN 61753-088-2 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 088-2: NON CONNECTORISED SINGLE-MODE FIBRE OPTIC LAN WDM DEVICES WITH CHANNEL SPACING OF 800 GHZ FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61753-143-2:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 143-2: OPTICAL PASSIVE VIPA-BASED DISPERSION COMPENSATOR OF SINGLE-MODE FIBRE TRANSMISSION FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-143-2:2012 (EQV)) |
| I.S. EN 50377-15-1:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
| CEI EN 61753-059-2 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 059-2: SINGLE-MODE FIBRE PLUG-RECEPTACLE STYLE OPTICAL LIMITER FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61753-382-2:2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 382-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL G-PON-NGA WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61753-083-2:2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 083-2: NON-CONNECTORISED SINGLE MODE FIBRE OPTIC C-BAND/L-BAND WDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 61753-087-2:2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| I.S. EN 50377-4-4:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-4: TYPE SC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U |
| I.S. EN 50377-6-1:2002 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 6-1: TYPE SC-RJ TERMINATED ON IEC 60793-2 CATEGORY A1A AND A1B MULTIMODE FIBRE |
| I.S. EN 50377-3-1:2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C |
| EN 50516-1-1:2011/AC:2012 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3 |
| EN 61753-088-2:2013 | Fibre optic interconnecting devices and passive components -Performance standard - Part 088-2: Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environments |
| EN 50377-8-3:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-3: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C |
| EN 50377-16-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 16-1: Type LF3 APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C |
| EN 50377-6-2:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 6-2: SC-RJ single mode terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, category U |
| EN 61753-381-6:2016 | Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6: Cyclic arrayed waveguide grating - Category O (uncontrolled environment) |
| EN 61753-053-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 053-2: Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments |
| EN 50377-7-2:2004 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-2: LC-PC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre |
| EN 61753-061-3:2004 | Fibre optic interconnecting devices and passive components performance standard - Part 061-3: Single mode fibre optic pigtailed style isolators for category U - Uncontrolled environment |
| EN 61753-089-2:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment |
| EN 61753-101-2 : 2006 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| EN 62664-1-1:2013 | Fibre optic interconnecting devices and passive components - Fibre optic connector product specifications - Part 1-1: LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre |
| EN 61753-1:2007 | Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards |
| EN 50377-8-11:2010 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-11: Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C |
| EN 50377-7-4:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-4: LC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with full zirconia ferrule for category C |
| EN 50377-6-1:2002 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 6-1: Type SC-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| EN 62005-9-1:2015 | Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical components |
| EN 50377-4-4:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-4: Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| EN 61753-381-2:2016 | Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguide grating - Category C (controlled environment) |
| EN 61753-087-2:2011 | Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C - Controlled environment |
| EN 50377-8-2:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-2: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C |
| EN 50377-3-1:2008 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 3-1: Type SG terminated on IEC 60793-2-10 category A1a, A1b or equivalent multimode fibre for category C |
| EN 50377-17-1:2013 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 17-1: TYPE FPFT (FACTORY POLISHED FIELD TERMINATED) SIMPLEX CONNECTOR FACTORY TERMINATED WITH EN 60793-2-50 CATEGORY B1.3 FIBRE AND FIELD MOUNTED ONTO IEC 60793-2-50 CATEGORY B1.3 OR B6A1 OR B6A2 SINGLEMODE FIBRE, CATEGORY C |
| EN 50377-8-6:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-6: LSH-HR simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C |
| EN 50377-8-13:2010 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-13: Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U |
| EN 50516-3-1:2014 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 3-1: Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3 |
| EN 50377-10-1:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 10-1: Type MU-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C |
| EN 61753-058-2:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 058-2: Single mode fibre pigtailed style optical power limiter for category C - Controlled environment |
| EN 50377-8-5:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-5: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U |
| EN 50411-3-3:2011 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-3: SINGLEMODE OPTICAL FIBRE FUSION SPLICE PROTECTORS |
| EN 61753-2-1:2000 | Fibre optic interconnecting devices and passive components performance standard - Part 2-1: Fibre optic connectors terminated on single-mode fibre for category U - Uncontrolled environment |
| EN 61753-081-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 081-2: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C - Controlled environments |
| EN 61753-041-2:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 041-2: Non-connectorized single-mode OTDR reflecting device for category C - Controlled environment |
| EN 50377-8-8:2007 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-8: LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
| OVE/ONORM EN 61753-021-2 : 2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 021-2: GRADE C/3 SINGLE-MODE FIBRE OPTIC CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
| EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 61300-1:2016 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance |
| IEC 61300-2-22:2007 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature |
| EN 61300-3-1:2005 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination |
| IEC 61300-1:2016 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| IEC 61300-3-1:2005 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.