EN 61300-2-37:2016
Current
Current
The latest, up-to-date edition.
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures
Published date
12-08-2016
Sorry this product is not available in your region.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General description
5 Apparatus
6 Procedure
7 Severity
8 Details to be specified
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
IEC 61300-2-37:2016 describes a test for the effectiveness of the sealing and clamping hardware of a fibre optic closure when the cable entering or exiting the fibre optic closure is subjected to bending. This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:- substantial updating of Subclauses 4.1, 6.5, 6.7 and Figure 1;- addition of severities which are determined by the number and direction of cable bends, test temperature and overpressure for each environmental category according to IEC 61753-1.Keywords: sealing and clamping hardware of a fibre optic closure, cable bending
| Committee |
CLC/TC 86BXA
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 61300-2-37:2012 | Identical |
| SN EN 61300-2-37:2016 | Identical |
| PN EN 61300-2-37 : 2016 | Identical |
| CEI EN 61300-2-37 : 2007 | Identical |
| NF EN 61300-2-37 : 2016 | Identical |
| IEC 61300-2-37:2016 | Identical |
| NBN EN 61300 2-37 : 2016 | Identical |
| DIN EN 61300-2-37:2013-09 (Draft) | Identical |
| NEN EN IEC 61300-2-37 : 2016 | Identical |
| BS EN 61300-2-37:2007 | Identical |
| I.S. EN 61300-2-37:2016 | Identical |
| UNE-EN 61300-2-37:2016 | Identical |
| BS EN 61300-2-37:2016 | Identical |
| PNE-FprEN 61300-2-37 | Identical |
| 13/30277630 DC : 0 | BS EN 50411-2-10 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-10: SEALED FIBRE SPLICE CLOSURES TYPE 2, CATEGORY G, FOR FTTH OPTICAL DISTRIBUTION NETWORKS |
| I.S. EN 61753-111-7:2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIAL |
| NF EN 50411-2-9 : 2010 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATIONS SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-9: NON-SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT CABLE, FOR CATEGORY S & A |
| CEI EN 50411-2-8 : 2010 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-8: MICRODUCT CONNECTORS, FOR AIR BLOWN OPTICAL FIBRES, TYPE 1 |
| BS EN 50411-2-5:2009 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Sealed closures for air blown fibre microduct, type 1, for category S & A |
| BS EN 50411-2-4:2012 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Sealed dome fibre splice closures Type 1, for category S & A |
| EN 61753-111-9:2010 | Fibre optic interconnecting devices and passive components - Performance standard - Part 111-9: Sealed closures for category S - Subterranean |
| EN 50411-2-9:2010 | Fibre organisers and closures to be used in optical fibre communications systems - Product specifications - Part 2-9: Non-sealed closures for air blown fibre microduct cable, for category S & A |
| EN 61753-111-7:2010 | Fibre optic interconnecting devices and passive components - Performance standard - Part 111-7: Sealed closures for category A - Aerial |
| I.S. EN 50411-2-9:2010 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATIONS SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-9: NON-SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT CABLE, FOR CATEGORY S & A |
| 11/30248951 DC : 0 | BS EN 50411-2-2 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: SEALED PAN FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| 11/30248954 DC : 0 | BS EN 50411-2-3 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-3: SEALED IN LINE FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| BS EN 61753-111-7:2010 | Fibre optic interconnecting devices and passive components performance standard Sealed closures for category A. Aerial |
| BS EN 50411-2-8:2009 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Microduct connectors, for air blown optical fibres, Type 1 |
| EN 61753-111-8:2010 | Fibre optic interconnecting devices and passive components - Performance standard - Part 111-8: Sealed closures for category G - Ground |
| BS EN 50411-2:2008 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors |
| PREN 50411-2-3 : DRAFT 2011 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-3: SEALED INLINE FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| CEI EN 50411-2-2 : 2013 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: SEALED PAN FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| I.S. EN 61753-111-8:2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND |
| I.S. EN 61753-1:2007 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 1: GENERAL AND GUIDANCE FOR PERFORMANCE STANDARDS |
| I.S. EN 50411-2-2:2012 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: SEALED PAN FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| BS EN 50411-2-9:2010 | Fibre organisers and closures to be used in optical fibre communications systems. Product specifications Non-sealed closures for air blown fibre microduct cable, for category S & A |
| BS EN 50411-2-2:2012 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Sealed pan fibre splice closures Type 1, for category S & A |
| CEI EN 50411-2-9 : 2011 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATIONS SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-9: NON-SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT CABLE, FOR CATEGORY S & A |
| CEI EN 50411-2 : 2010 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES, AND MICRODUCT CONNECTORS |
| I.S. EN 50411-2-4:2012 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-4: SEALED DOME FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| CEI EN 61753-111-8 : 2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND |
| BS EN 61753-1:2007 | Fibre optic interconnecting devices and passive components performance standard General and guidance for performance standards |
| I.S. EN 61753-111-9:2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-9: SEALED CLOSURES FOR CATEGORY S - SUBTERRANEAN |
| CEI EN 50411-2-3 : 2013 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-3: SEALED INLINE FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| CEI EN 50411-2-5 : 2010 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-5: SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT, TYPE 1, FOR CATEGORY S & A |
| PREN 50411-2-10 : DRAFT 2013 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-10: SEALED FIBRE SPLICE CLOSURES TYPE 2, CATEGORY G, FOR FTTH OPTICAL DISTRIBUTION NETWORKS |
| 11/30248957 DC : 0 | BS EN 50411-2-4 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-4: SEALED DOME FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| BS EN 61753-111-9:2010 | Fibre optic interconnecting devices and passive components performance standard Sealed closures for category S. Subterranean |
| BS EN 50411-2-3:2012 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Sealed inline fibre splice closures Type 1, for category S & A |
| CEI EN 61753-1 : 2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 1: GENERAL AND GUIDANCE FOR PERFORMANCE STANDARDS |
| 07/30170352 DC : DRAFT AUG 2007 | BS EN 50411-2 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES AND MICRODUCT CONNECTORS |
| BS EN 50411-2-10:2015 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Sealed fibre splice closures type 2, category G, for FTTH optical distribution networks |
| CEI EN 50411-2-4 : 2013 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-4: SEALED DOME FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| 06/30156201 DC : 0 | BS EN 50411-2-3 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-3: SEALED INLINE FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S AND A |
| I.S. EN 50411-2-10:2015 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-10: SEALED FIBRE SPLICE CLOSURES TYPE 2, CATEGORY G, FOR FTTH OPTICAL DISTRIBUTION NETWORKS |
| PREN 50411-2-4 : DRAFT 2011 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-4: SEALED DOME FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| I.S. EN 50411-2:2008 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES, AND MICRODUCT CONNECTORS |
| I.S. EN 50411-2-3:2012 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-3: SEALED INLINE FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| EN 50411-2-3:2012 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-3: Sealed inline fibre splice closures Type 1, for category S & A |
| CEI EN 61753-111-9 : 2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-9: SEALED CLOSURES FOR CATEGORY S - SUBTERRANEAN |
| I.S. EN 50411-2-8:2009 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-8: MICRODUCT CONNECTORS, FOR AIR BLOWN OPTICAL FIBRES, TYPE 1 |
| BS EN 61753-111-8:2010 | Fibre optic interconnecting devices and passive components performance standard Sealed closures for category G. Ground |
| I.S. EN 50411-2-5:2009 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-5: SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT, TYPE 1, FOR CATEGORY S & A |
| PREN 50411-2-2 : DRAFT 2011 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: SEALED PAN FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| 04/30124130 DC : DRAFT OCT 2004 | EN 50411-2-4 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-4: SEALED DOME FIBRE SPLICE CLOSURES TYPE 1, FOR CATEGORY S & A |
| EN 50411-2-8:2009 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-8: Microduct connectors, for air blown optical fibres, Type 1 |
| EN 50411-2:2008 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2: General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors |
| EN 61753-1:2007 | Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards |
| EN 50411-2-10:2015 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-10: Sealed fibre splice closures type 2, category G, for FTTH optical distribution networks |
| EN 50411-2-5:2009 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-5: Sealed closures for air blown fibre microduct, type 1, for category S & A |
| EN 50411-2-2:2012 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-2: Sealed pan fibre splice closures Type 1, for category S & A |
| EN 50411-2-4:2012 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-4: Sealed dome fibre splice closures Type 1, for category S & A |
| IEC 61300-3-28:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss |
| EN 61300-2-23:2011 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices |
| IEC 61300-3-3:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss |
| EN 61300-3-3:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss |
| IEC 61300-2-23:2010 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices |
| EN 61300-2-38:2006 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized fibre optic closures |
| IEC 61753-1:2007 | Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards |
| EN 61753-1:2007 | Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards |
| IEC 61300-2-38:2006 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized fibre optic closures |
| EN 61300-1:2016 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance |
| EN 61300-3-1:2005 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination |
| IEC 61300-1:2016 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance |
| EN 61300-3-28:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss |
| IEC 61300-3-1:2005 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.