EN 62053-31:1998
Current
The latest, up-to-date edition.
Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices for electromechanical and electronic meters (two wires only)
17-04-1998
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
3.1 General definitions
3.2 Definitions related to functional elements
4 Requirements
4.1 Functional requirements
4.2 Mechanical requirements
4.3 Climatic conditions
4.4 Electrical requirements
4.5 Electromagnetic compatibility (EMC)
5 Tests and test conditions
5.1 General testing procedures
5.2 Tests for mechanical requirements
5.3 Tests for climatic influences
5.4 Tests for electrical requirements
5.5 Tests for electromagnetic compatibility (EMC)
5.6 Functional tests
Annex A (normative) - Physical interface of the pulse output
Annex B (normative) - Output pulse waveform
Annex C (normative) - Test of pulse output device
Annex D (informative) - Test of pulse input device
Annex E (informative) - Special application - Pulse output
device for long distances according to IEC 60381-1
Annex F (informative) - Test schedule
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Applies to passive, two-wire, externally powered pulse output devices to be used in electricity meters as defined by the relevant standards of technical committee 13 as well as future standards for static VA-hour meters. Such pulse output devices are used to transmit pulses to a receiver (e.g. a tariff device).
| Committee |
CLC/TC 13
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| IEC 62053-31:1998 | Identical |
| NF EN 62053-31 : 1998 | Identical |
| NBN EN 62053-31 : 1998 | Identical |
| NEN EN IEC 62053-31 : 1998 | Identical |
| I.S. EN 62053-31:1999 | Identical |
| PN EN 62053-31 : 2005 | Identical |
| SN EN 62053-31 : 1998 | Identical |
| DIN EN 62053-31 : 1999 | Identical |
| VDE 0418-3-31 : 1999 | Identical |
| BS EN 62053-31:1999 | Identical |
| CEI EN 62053-31 : 1999 | Identical |
| UNE-EN 62053-31:1999 | Identical |
| BS EN 61036:1997 | Alternating current static watt-hour meters for active energy (classes 1 and 2) |
| UNE-EN 61557-12:2010 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -- Part 12: Performance measuring and monitoring devices (PMD) |
| I.S. EN 50470-1:2006 | ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C) |
| CEI EN 62974-1 : 1ED 2017 | MONITORING AND MEASURING SYSTEMS USED FOR DATA COLLECTION, GATHERING AND ANALYSIS - PART 1: DEVICE REQUIREMENTS |
| EN 62974-1:2017 | Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements |
| I.S. EN 61557-12:2008 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD) |
| I.S. EN 61036:1997 | ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| BS EN 62974-1:2017 | Monitoring and measuring systems used for data collection, gathering and analysis Device requirements |
| UNE-EN 62974-1:2018 | Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements |
| BS EN 50470-1 : 2006 | ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C) |
| CEI 13-26 : 1999 | WATT-HOUR METERS AND POWER LIMITERS FOR LOW-VOLTAGE NETWORKS (INTEGRATED UNITS) PERMITTED OR NOT FOR PROCESSING AND REMOTE MANAGEMENT OF DATA |
| CEI EN 61557-12 : 2013 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD) |
| BS EN 61557-12:2008 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures Performance measuring and monitoring devices (PMD) |
| I.S. EN 62974-1:2017 | MONITORING AND MEASURING SYSTEMS USED FOR DATA COLLECTION, GATHERING AND ANALYSIS - PART 1: DEVICE REQUIREMENTS |
| CEI EN 62052-11 : 2003 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT |
| EN 50470-1:2006 | Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C) |
| BS EN 62052-11 : 2003 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 11: METERING EQUIPMENT (IEC 62052-11:2003) |
| EN 61036:1996/A1:2000 | ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| EN 61557-12:2008 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD) |
| EN 62052-11:2003/A1:2017/AC:2018-04 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT (IEC 62052-11:2003/A1:2016/COR1:2018) |
| EN 60687:1992/corrigendum:1993 | ALTERNATING CURRENT STATIC WATT HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2S AND 0.5S) |
| IEC 60381-1:1982 | Analogue signals for process control systems. Part 1: Direct current signals |
| IEC 60521:1988 | Class 0.5, 1 and 2 alternating-current watthour meters |
| IEC 60145:1963 | Var-hour (reactive energy) meters |
| EN 60521:1995/corrigendum Dec. 1997 | CLASS 0,5, 1 AND 2 ALTERNATING-CURRENT WATTHOUR METERS |
| IEC 60687:1992 | Alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S) |
| IEC 61268:1995 | Alternating current static var-hour meters for reactive energy (classes 2 and 3) |
| HD 452.1 : 200S1 | ANALOGUE SIGNALS FOR PROCESS CONTROL SYSTEMS - DIRECT CURRENT SIGNALS |
| IEC 62053-61:1998 | Electricity metering equipment (a.c.) - Particular requirements - Part 61: Power consumption and voltage requirements |
| EN 62053-61:1998 | Electricity metering equipment (a.c.) - Particular requirements - Part 61: Power consumption and voltage requirements |
| EN 61036:1996/A1:2000 | ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| EN 61268:1996 | Alternating current static var-hour meters for reactive energy (classes 2 and 3) |
| IEC 61036:1996+AMD1:2000 CSV | Alternating current static watt-hour meters for active energy (classes 1 and 2) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.