EN 739:1998/A1:2002
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES
Superseded date
01-06-2008
Superseded by
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 Terminology
5 General requirements
6 Test methods
7 Marking, colour coding and packaging
8 Information to be supplied by the manufacturer
Annex A (normative) Special national conditions
Annex B (informative) Rationale
Annex C (informative) Bibliography
Annex ZA (informative) Clauses of this addressing
essential requirements or other provisions
of EU Directives
Defines requirements for low-pressure hose assemblies for use with oxygen, nitrous oxide, air for breathing, helium, carbon dioxide, xenon, specified mixtures of the gases listed previously, air for driving surgical tools, nitrogen for driving surgical tools and vacuum. Intended to ensure gas-specificity and for prevention of cross-connection between different gases.
| Committee |
TC 215
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| SN EN 739 : 1998 AMD 1 2002 | Identical |
| DIN EN 739:2002-07 | Identical |
| NBN EN 739 : 98 AMD 1 2002 | Identical |
| NF EN 739 : 98 AMD 1 2002 | Identical |
| UNI EN 739 : 2003 | Identical |
| NS EN 739 : 1998 AMD 1 2002 | Identical |
| I.S. EN 739:1998 | Identical |
| UNE-EN 739:1998 | Identical |
| NEN EN 739 : 1998 AMD 1 2002 | Identical |
| PN EN 739 : 2005 | Identical |
| DIN EN 739:1998-02 | Identical |
| EN ISO 5359:2014 | Identical |
| CSA Z10524-3 : 2012 : R2017 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| 04/30084857 DC : DRAFT JUN 2004 | BS EN ISO 10524-1 - PRESSURE REGULATORS FOR USE WITH MEDICAL GAS SYSTEMS - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| CSA Z10524-1 : 2012 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| UNE-EN 15908:2011 | Anaesthetic and respiratory equipment - Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases |
| 05/30129368 DC : DRAFT AUG 2005 | ISO 9170-2 - TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
| S.R. CR 13903:2000 | GENERAL GUIDANCE ON THE EQUIPMENT USED FOR INHALED NITRIC OXIDE THERAPY |
| 05/30128373 DC : DRAFT JAN 2005 | ISO 7396-2 - MEDICAL GAS PIPELINE SYSTEMS - PART 2: ANAESTHETIC GAS SCAVENGING DISPOSAL SYSTEMS - BASIC REQUIREMENTS |
| BS EN 14931:2006 | Pressure vessels for human occupancy (PVHO). Multi-place pressure chambers for hyperbaric therapy. Performance, safety requirements and testing |
| 05/30129374 DC : 0 | ISO 15002 - FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
| I.S. EN 14931:2006 | PRESSURE VESSELS FOR HUMAN OCCUPANCY (PVHO) - MULTI-PLACE PRESSURE CHAMBER SYSTEMS FOR HYPERBARIC THERAPY - PERFORMANCE, SAFETY REQUIREMENTS AND TESTING |
| ISO 10524-3:2005 | Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves |
| BS EN 737-1:1998 | Medical gas pipeline systems Terminal units for compressed medical gases and vacuum |
| DIN EN 737-3:1998-11 | MEDICAL GAS PIPELINE SYSTEMS - PART 3: PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM |
| CEN/TS 14507-1:2003 | Inhalational nitric oxide systems - Part 1: Delivery systems |
| DIN EN 14931:2006-08 | Pressure vessels for human occupancy (PVHO) - Multi-place pressure chamber systems for hyperbaric therapy - Performance, safety requirements and testing |
| EN 13221 : 2000 | HIGH-PRESSURE FLEXIBLE CONNECTIONS FOR USE WITH MEDICAL GASES |
| CR 13903:2000 | General guidance on the equipment used for inhaled nitric oxide therapy |
| DIN EN 15908:2011-01 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES |
| DIN EN 793 : 1998 | PARTICULAR REQUIREMENTS FOR SAFETY OF MEDICAL SUPPLY UNITS |
| EN 13544-1:2007+A1:2009 | Respiratory therapy equipment - Part 1: Nebulizing systems and their components |
| I.S. EN 738-3:1999 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| I.S. EN 740:1999 | ANAESTHETIC WORKSTATIONS AND THEIR MODULES - PARTICULAR REQUIREMENTS |
| CSA Z9170.2 : 0 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
| DD CEN/TS 14507-1:2003 | Inhalational nitric oxide systems Delivery systems |
| 04/30057165 DC : 0 | BS EN 14931 - PRESSURE VESSELS FOR HUMAN OCCUPANCY (PVHO) - MULTI-PLACE PRESSURE CHAMBERS FOR HYPERBARIC THERAPY - PERFORMANCE, SAFETY REQUIREMENTS AND TESTING |
| I.S. ENV 737-6:2003 | MEDICAL GAS PIPELINE SYSTEMS - PART 6: DIMENSIONS AND ALLOCATION OF PROBES FOR TERMINAL UNITS FOR COMPRESSED MEDICAL GASES AND VACUUM |
| DIN EN ISO 10524-1:2006-05 | PRESSURE REGULATORS FOR USE WITH MEDICAL GAS - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| I.S. EN ISO 10524-3:2006 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES (ISO 10524-3:2005) |
| 05/30129363 DC : DRAFT AUG 2005 | ISO 9170-1 - TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
| BS 5724-2.204(1999) : 1999 | ANAESTHETIC WORKSTATIONS AND THEIR MODULES - PARTICULAR REQUIREMENTS |
| 06/30106983 DC : 0 | EN 13718-1 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS OF MEDICAL DEVICES USED IN AIR AMBULANCES |
| DD ENV 737-6:2003 | Medical gas pipeline systems Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum |
| DIN EN 738-1:2002-07 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW METERING DEVICES |
| DIN EN 794-1:2001-02 | LUNG VENTILATORS - PART 1: PARTICULAR REQUIREMENTS FOR CRITICAL CARE VENTILATORS |
| I.S. EN 794-3:1998 | LUNG VENTILATORS - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS |
| DIN EN 737-3:2000-01 | MEDICAL GAS PIPELINE SYSTEMS - PART 3: PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM |
| CSA Z10524-3 : 2012 : INC : AMD 1 : 2017 : R201700 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| CSA Z10524-1 : 2012 : R2017 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| I.S. EN 13220:1999 | FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
| I.S. CEN/TS 14507-1:2003 | INHALATIONAL NITRIC OXIDE SYSTEMS - PART 1: DELIVERY SYSTEMS |
| I.S. EN 737-3:1999 | MEDICAL GAS PIPELINE SYSTEMS - PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM |
| BS EN 15908:2010 | Anaesthetic and respiratory equipment. Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases |
| BS EN ISO 10524-1:2006 | Pressure regulators for use with medical gases Pressure regulators and pressure regulators with flow-metering devices |
| DD CEN/TS 14507-2:2003 | Inhalational nitric oxide systems Supply systems |
| I.S. EN ISO 10524-1:2006 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| UNI EN ISO 10524-3 : 2013 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| CSA Z7396.2 : 2002 | MEDICAL GAS PIPELINE SYSTEMS - PART 2: ANAESTHETIC GAS SCAVENGING DISPOSAL SYSTEMS |
| DIN EN ISO 10524-3:2013-06 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES (ISO 10524-3:2005 + AMD 1:2013) |
| EN ISO 10524-1:2006 | Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006) |
| DIN EN 13544-1:2009-12 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| I.S. EN 13544-1:2007 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| EN 738-4:1998/A1:2002 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - LOW-PRESSURE REGULATORS INTENDED FOR INCORPORATION INTO MEDICAL EQUIPMENT |
| EN 737-1 : 1998 | MEDICAL GAS PIPELINE SYSTEMS - TERMINAL UNITS FOR COMPRESSED MEDICAL GASES AND VACUUM |
| UNI EN 13544-1 : 2009 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| UNI EN 794-3 : 2009 | LUNG VENTILATORS - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS |
| UNI EN 15908 : 2010 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES |
| 06/30116855 DC : 0 | BS ISO 10524-4 - PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS INTENDED FOR INCORPORATION INTO MEDICAL EQUIPMENT |
| I.S. EN 15908:2010 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES |
| BS EN ISO 10524-3 : 2006 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| BS EN ISO 11197:2009 | Medical supply units |
| I.S. CEN/TS 14507-2:2003 | INHALATIONAL NITRIC OXIDE SYSTEMS - PART 2: SUPPLY SYSTEMS |
| BS EN 13544-1 : 2007 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| BS EN 737-3:2000 | Medical gas pipeline systems Pipelines for compressed medical gases and vacuum |
| BS EN 794-3 : 1999 | LUNG VENTILATORS - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS |
| BS EN 740:1999 | Anaesthetic workstations and their modules. Particular requirements |
| BS EN 13220:1999 | Flow-metering devices for connection to terminal units of medical gas pipeline systems |
| BS EN 13221:2000 | High-pressure flexible connections for use with medical gases |
| EN 15908:2010 | Anaesthetic and respiratory equipment - Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases |
| EN 737-2:1998/A1:1999 | MEDICAL GAS PIPELINE SYSTEMS - PART 2: ANAESTHETIC GAS SCAVENGING DISPOSAL SYSTEMS - BASIC REQUIREMENTS |
| EN 738-3:1998/A1:2002 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| EN 737-3:1998/A1:1999 | MEDICAL GAS PIPELINE SYSTEMS - PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM |
| EN 14931:2006 | Pressure vessels for human occupancy (PVHO) - Multi-place pressure chamber systems for hyperbaric therapy - Performance, safety requirements and testing |
| EN 794-3:1998+A2:2009 | Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators |
| EN 793 : 1997 | PARTICULAR REQUIREMENTS FOR SAFETY OF MEDICAL SUPPLY UNITS |
| CSA Z10524-3 : 2012 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| 04/30088537 DC : DRAFT SEP 2004 | PREN ISO 7396-1 - MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM |
| I.S. EN 738-4:1999 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS INTENDED FOR INCORPORATION INTO MEDICAL EQUIPMENT |
| I.S. EN 737-2:1998 | MEDICAL GAS PIPELINE SYSTEMS - PART 2: ANAESTHETIC GAS SCAVENGING DISPOSAL SYSTEMS - BASIC REQUIREMENTS |
| I.S. EN 737-1:1998 | MEDICAL GAS PIPELINE SYSTEMS - TERMINAL UNITS FOR COMPRESSED MEDICAL GASES AND VACUUM |
| DIN EN 15908 E : 2011 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES |
| PD CR 13903:2001 | General guidance on the equipment used for inhaled nitric oxide therapy |
| DIN EN 794-3:2009-12 | Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators; German version EN 794-3:1998+A2:2009 |
| BS EN 793:1998 | Particular requirements for safety of medical supply units |
| EN 13220 : 1998 | FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
| CEN/TS 14507-2:2003 | Inhalational nitric oxide systems - Part 2: Supply systems |
| ENV 737-6:2003 | Medical gas pipeline systems - Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum |
| UNE-EN 794-3:1999 | LUNG VENTILATORS. PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS. |
| UNE-EN 13544-1:2007 | Respiratory therapy equipment - Part 1: Nebulizing systems and their components |
| EN 794-1:1997+A2:2009 | Lung ventilators - Part 1: Particular requirements for critical care ventilators |
| EN 738-1:1997/A1:2002 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW METERING DEVICES |
| ISO 5774:2016 | Plastics hoses — Textile-reinforced types for compressed-air applications — Specification |
| EN 1441 : 1997 | MEDICAL DEVICES - RISK ANALYSIS |
| EN 737-1 : 1998 | MEDICAL GAS PIPELINE SYSTEMS - TERMINAL UNITS FOR COMPRESSED MEDICAL GASES AND VACUUM |
| ISO 32:1977 | Gas cylinders for medical use — Marking for identification of content |
| EN 1089-3:2011 | Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding |
| ISO 7751:2016 | Rubber and plastics hoses and hose assemblies Ratios of proof and burst pressure to maximum working pressure |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
| CR 13903:2000 | General guidance on the equipment used for inhaled nitric oxide therapy |
| ISO 1402:2009 | Rubber and plastics hoses and hose assemblies Hydrostatic testing |
| ISO 1307:2006 | Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses |
| EN 793 : 1997 | PARTICULAR REQUIREMENTS FOR SAFETY OF MEDICAL SUPPLY UNITS |
| ISO 8033:2016 | Rubber and plastics hoses Determination of adhesion between components |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.