EN 80416-1:2009
Current
The latest, up-to-date edition.
Basic principles for graphical symbols for use on equipment - Part 1: Creation of graphical symbols for registration
13-02-2009
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Creation procedures
5 Meaning
5.1 Assignment
5.2 Orientation of the graphical symbols
6 Combination of graphical symbols
7 Creation principles
7.1 Creation of symbol original
7.2 Design guidelines
7.3 Line width
7.4 Spacing
7.5 Angles
7.6 Filled areas
7.7 Symbol original with arrows
7.8 Characters as symbol elements
7.9 Negation
7.9.1 Methods of negation
7.9.2 Angle of negation
7.9.3 Meaning of negation
7.9.4 Negation as prohibition
8 Basic pattern
8.1 Structure
8.2 Application of the basic pattern
8.3 Specification of symbol original
Annex A (normative) - Title, description and notes
Annex B (informative) - Guidance for the wording of the
description for a symbol original
Annex C (informative) - Designation systems
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
IEC 80416-1:2008 provides basic principles and guidelines for the creation of graphical symbols for registration, and provides the key principles and rules for the preparation of title, description and note(s). This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - a) Clause 8 in the previous edition is moved to Clause 4; - b) Mandatory requirement for the line width in symbol originals is changed to 2 mm or 4 mm (see 6th paragraph of 7.3); - c) For negation of a graphical symbol, a single diagonal bar is allowed in addition to two diagonal bars at right angles; - d) A new meaning of negation 'do not' is allowed; - e) Some freedom is given for use of the basic pattern such as for symbol originals to be within the 75 mm square instead of the octagon; - f) Annex A (normative) is newly introduced for provisions on title, description and notes; - g) The nature of notes is changed to be purely informative; and - h) Clause 10 in the previous edition is moved to Annex C (informative). It has the status of a horizontal standard in accordance with IEC Guide 108. This International Standard has been prepared in co-operation with ISO/TC145/SC 3. It is published as a double logo standard.
Committee |
CLC/SR 3C
|
DevelopmentNote |
Supersedes HD 571 (01/2002)
|
DocumentType |
Standard
|
PublisherName |
European Committee for Standards - Electrical
|
Status |
Current
|
Standards | Relationship |
CEI EN 80416-1 : 2009 | Identical |
I.S. EN 80416-1:2009 | Identical |
BS EN 80416-1:2002 | Identical |
IEC 80416-1:2008 | Identical |
NBN EN 80416-1 : 2009 | Identical |
NEN EN IEC 80416-1 : 2009 | Identical |
SN EN 80416-1 : 2001 | Identical |
NF EN 80416-1 : 2009 | Identical |
DIN EN 80416-1:2009-11 | Identical |
UNE-EN 80416-1:2011 | Identical |
PN EN 80416-1 : 2009 | Identical |
BS EN 80416-1:2009 | Identical |
BS EN 60384-14-2:2016 | Identical |
BS EN 62744:2015 | Representation of states of objects by graphical symbols |
14/30288853 DC : 0 | BS PD CEN/TS 15989 - FIREFIGHTING AND RESCUE SERVICE VEHICLES AND EQUIPMENT - GRAPHICAL SYMBOLS FOR CONTROL ELEMENTS AND DISPLAYS AND FOR MARKINGS |
S.R. CEN TR 614-3:2010 | SAFETY OF MACHINERY - PART 3: ERGONOMIC PRINCIPLES FOR THE DESIGN OF MOBILE MACHINERY |
PRCEN/TS 15989 : DRAFT 2014 | FIREFIGHTING AND RESCUE SERVICE VEHICLES AND EQUIPMENT - GRAPHICAL SYMBOLS FOR CONTROL ELEMENTS AND DISPLAYS AND FOR MARKINGS |
BS EN 80416-3 : 2003 | BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 3: GUIDELINES FOR THE APPLICATION OF GRAPHICAL SYMBOLS |
UNI CEI EN 980 : 2009 | SYMBOLS FOR USE IN THE LABELLING OF MEDICAL DEVICES |
EN 80416-2:2001 | Basic principles for graphical symbols for use on equipment - Part 2: Form and use of arrows |
CEN/TS 15989:2015 | Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings |
BS EN 50083-3:1999 | Cabled distribution systems for television and sound signals Active wideband equipment for coaxial cable networks |
VDI/VDE 6008 Blatt 3:2014-01 | Barrier-free buildings - Aspects of electrical installation and building automation |
VDI 6008 Blatt 1:2012-12 | Barrier-free buildings - Requirements and fundamentals |
I.S. EN 60598-1:2015 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
EN 60598-1:2015/A1:2018 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
BS EN 60598-1:2015 | Luminaires General requirements and tests |
EN 14916:2005 | Domestic cookware - Graphical symbols (pictograms) |
BS EN 80416-2:2001 | Basic principles for graphical symbols for use on equipment Form and use of arrows |
UNE-EN 60598-1:2015 | Luminaires - Part 1: General requirements and tests |
I.S. EN 80416-3:2002 | BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 3: GUIDELINES FOR THE APPLICATION OF GRAPHICAL SYMBOLS |
S.R. CEN/TS 15989:2015 | FIREFIGHTING AND RESCUE SERVICE VEHICLES AND EQUIPMENT - GRAPHICAL SYMBOLS FOR CONTROL ELEMENTS AND DISPLAYS AND FOR MARKINGS |
BS EN 14916:2005 | Domestic cookware. Graphical symbols (pictograms) |
UNE-EN 80416-3:2003 | Basic principles for graphical symbols for use on equipment -- Part 3: Guidelines for the application of graphical symbols |
EN 980:2008 | Symbols for use in the labelling of medical devices |
I.S. EN 980:2008 | SYMBOLS FOR USE IN THE LABELLING OF MEDICAL DEVICES |
PD CEN/TS 15989:2015 | Firefighting and rescue service vehicles and equipment. Graphical symbols for control elements and displays and for markings |
PD CEN/TR 614-3:2010 | Safety of machinery Ergonomic principles for the design of mobile machinery |
I.S. EN 80416-2:2001 | BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 2: FORM AND USE OF ARROWS |
CEI EN 80416-2 : 2006 | BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 2: FORM AND USE OF ARROWS |
UNE-EN 82079-1:2015 | Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements |
BS EN 980:2008 | Symbols for use in the labelling of medical devices |
EN 80416-3:2002/A1:2011 | BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 3: GUIDELINES FOR THE APPLICATION OF GRAPHICAL SYMBOLS |
DIN EN 14916:2006-01 | Domestic cookware - Graphical symbols (pictograms) |
EN 62744:2015 | Representation of states of objects by graphical symbols |
CEN/TR 614-3:2010 | Safety of machinery - Part 3: Ergonomic principles for the design of mobile machinery |
DIN EN 980:2003-08 | SYMBOLS FOR USE IN THE LABELLING OF MEDICAL DEVICES |
EN 80416-3:2002/A1:2011 | BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 3: GUIDELINES FOR THE APPLICATION OF GRAPHICAL SYMBOLS |
EN 80416-2:2001 | Basic principles for graphical symbols for use on equipment - Part 2: Form and use of arrows |
ISO 80416-4:2005 | Basic principles for graphical symbols for use on equipment — Part 4: Guidelines for the adaptation of graphical symbols for use on screens and displays (icons) |
EN ISO 81714-1:2010 | Design of graphical symbols for use in the technical documentation of products - Part 1: Basic rules (ISO 81714-1:2010) |
ISO 81714-1:2010 | Design of graphical symbols for use in the technical documentation of products Part 1: Basic rules |
ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
ISO 7001:2007 | Graphical symbols — Public information symbols |
IEC 80416-3:2002+AMD1:2011 CSV | Basic principles for graphical symbols for use on equipment - Part 3: Guidelines for the application of graphical symbols |
ISO 80416-2:2001 | Basic principles for graphical symbols for use on equipment — Part 2: Form and use of arrows |
ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
ISO/IEC Guide 71:2014 | Guide for addressing accessibility in standards |
ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
ISO/IEC Guide 74:2004 | Graphical symbols — Technical guidelines for the consideration of consumers' needs |
IEC GUIDE 108:2006 | Guidelines for ensuring the coherency of IEC publications - Application of horizontal standards |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.