EN ISO 11469:2016
Current
Current
The latest, up-to-date edition.
Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
Published date
19-10-2016
Publisher
Sorry this product is not available in your region.
European foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Requirements
ISO 11469:2016 specifies a system of uniform marking of products that have been fabricated from plastics materials. Provision for the process or processes to be used for marking is outside the scope of this International Standard.NOTE 1 Precise details of the marking, e.g. the minimum size of the item to be marked, the size of the lettering, the appropriate location of the marking, are subject to agreement between the manufacturer and the user.The marking system is intended to help identify plastics products for subsequent decisions concerning handling, waste recovery or disposal.Generic identification of the plastics is provided by the symbols and abbreviated terms given in ISO 1043‑1, ISO 1043‑2, ISO 1043‑3 and ISO 1043‑4.NOTE 2 If more detailed information for material identification is needed, additional marking of plastics products can be applied as defined in the appropriate product standard.ISO 11469:2016 is not intended to supplant, replace or in any way interfere with the requirements for labelling specified in product standards or legislation.
| Committee |
CEN/TC 249
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNI EN ISO 11469 : 2001 | Identical |
| PN EN ISO 11469 : 2016 | Identical |
| UNI EN ISO 11469 : 2016 | Identical |
| SN EN ISO 11469 : 2017 | Identical |
| UNE-EN ISO 11469:2017 | Identical |
| NS EN ISO 11469 : 2000 | Identical |
| I.S. EN ISO 11469:2016 | Identical |
| NF EN ISO 11469 : 2016 | Identical |
| NEN EN ISO 11469 : 2016 | Identical |
| BS EN ISO 11469:2016 | Identical |
| SS-EN ISO 11469 : 2016 | Identical |
| DIN EN ISO 11469:2015-09 (Draft) | Identical |
| DIN EN ISO 11469:2017-01 | Identical |
| ISO 11469:2016 | Identical |
| NBN EN ISO 11469 : 2000 | Identical |
| DIN EN ISO 11469:2000-10 | Identical |
| UNI CEN/TS 16398 : 2013 | PLASTICS - TEMPLATE FOR REPORTING AND COMMUNICATION OF BIOBASED CARBON CONTENT AND RECOVERY OPTIONS OF BIOPOLYMERS AND BIOPLASTICS - DATA SHEET |
| PREN 840-2 : DRAFT 2010 | MOBILE WASTE CONTAINERS - PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| DIN EN 15345:2008-02 | Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
| PREN 840-3 : DRAFT 2010 | MOBILE WASTE CONTAINERS - PART 3: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH DOME LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| BS EN 15347:2007 | Plastics. Recycled Plastics. Characterization of plastics waste |
| BS EN 840-4:2012 | Mobile waste and recycling containers Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices. Dimensions and design |
| UNE-EN 840-4:2013 | Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design |
| UNE-EN 840-1:2013 | Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design |
| EN 175301-801:2006 | Detail Specification: High density rectangular connectors, round removable crimp contacts |
| EN 62208:2011 | Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements |
| EN 60286-2:2015 | Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes |
| EN 50290-2-20:2016 | Communication cables - Part 2-20: Common design rules and construction - General |
| CEN/TS 16398:2012 | Plastics - Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics - Data sheet |
| DIN EN 15551:2011-01 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| DIN EN 840-3:2013-03 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 3: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH DOME LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| BS EN 62075:2012 | Audio/video, information and communication technology equipment. Environmentally conscious design |
| 10/30232446 DC : 0 | BS EN 840-3 - MOBILE WASTE CONTAINERS - PART 3: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH DOME LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| PD CEN/TS 16398:2012 | Plastics. Template for reporting and communication of biobased carbon content and recovery options of biopolymers and bioplastics. Data sheet |
| BS EN 60286-6:2004 | Packaging of components for automatic handling Bulk case packaging for surface mounting components |
| BS EN 50290-2-20:2016 | Communication cables Common design rules and construction. General |
| BS EN 62208:2011 | Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements |
| UNI EN 15345 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
| CEI EN 62208 : 2012 | EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS |
| EN 60286-1:2017 | Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes |
| I.S. EN 60286-1:2017 | PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 1: TAPE PACKAGING OF COMPONENTS WITH AXIAL LEADS ON CONTINUOUS TAPES |
| DIN EN 15347:2008-02 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
| DIN EN 15342:2008-02 | Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates |
| BS EN 840-1:2012 | Mobile waste and recycling containers Containers with 2 wheels with a capacity up to 400 l for comb lifting devices. Dimensions and design |
| BS EN 60286-2:2015 | Packaging of components for automatic handling Packaging of components with unidirectional leads on continuous tapes |
| I.S. EN 61076-3-118:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
| CEI EN 61076-3-118 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
| BS EN 60286-1:2017 | Packaging of components for automatic handling Tape packaging of components with axial leads on continuous tapes |
| UNI EN 15347 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES |
| BS EN 61076-3-118:2010 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for a 4 pole + PE power connector with push-pull coupling |
| BS PAS 103(2004) : 2004 | COLLECTED WASTE PLASTICS PACKAGING - SPECIFICATION FOR QUALITY AND GUIDANCE FOR GOOD PRACTICE IN COLLECTION AND PREPARATION FOR RECYCLING |
| BS EN 175301-801:2006 | Detail specification. High density rectangular connectors, round removable crimp contacts |
| BS EN 61076-3-120:2016 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A |
| BS EN 15551:2017 | Railway applications. Railway rolling stock. Buffers |
| EN IEC 61076-2-111:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking |
| UNE-EN 62208:2012 | Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements |
| CEI EN 60286-1 : 2001 | PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 1: TAPE PACKAGING OF COMPONENTS WITH AXIAL LEADS ON CONTINUOUS TAPES |
| UNI EN 15342 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES |
| I.S. EN 175301-801:2006 | DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS |
| PREN 840-4 : DRAFT 2010 | MOBILE WASTE CONTAINERS - PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG- AND/OR WIDE COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| I.S. EN 60286-6:2004 | PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 6: BULK CASE PACKAGING FOR SURFACE MOUNTING COMPONENTS |
| BS EN 840-3:2012 | Mobile waste and recycling containers Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices. Dimensions and design |
| 10/30232449 DC : 0 | BS EN 840-4 - MOBILE WASTE CONTAINERS - PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG- AND/OR WIDE COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| 10/30232443 DC : 0 | BS EN 840-2 - MOBILE WASTE CONTAINERS - PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| UNE-EN 16848:2017 | Bio-based products - Requirements for Business to Business communication of characteristics using a Data Sheet |
| I.S. EN 16848:2016 | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET |
| PREN 50290-2-20 : DRAFT 2016 | COMMUNICATION CABLES - PART 2-20: COMMON DESIGN RULES AND CONSTRUCTION - GENERAL |
| EN IEC 61076-3-119:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz |
| 10/30232440 DC : 0 | BS EN 840-1 - MOBILE WASTE CONTAINERS - CONTAINERS WITH 2 WHEELS WITH A CAPACITY UP TO 400 L FOR COMB LIFTING DEVICES, DIMENSIONS AND DESIGN |
| BS EN 15345:2007 | Plastics. Recycled plastics. Characterization of polypropylene (PP) recyclates |
| UNE-EN 50290-2-20:2017 | Communication cables - Part 2-20: Common design rules and construction - General |
| I.S. EN 15551:2017 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| PREN 840-1 : DRAFT 2010 | MOBILE WASTE CONTAINERS - CONTAINERS WITH 2 WHEELS WITH A CAPACITY UP TO 400 L FOR COMB LIFTING DEVICES, DIMENSIONS AND DESIGN |
| UNE-EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
| I.S. EN 62208:2011 | EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS (IEC 62208:2011) |
| I.S. EN 15345:2007 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
| I.S. EN 62075:2012 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012 (EQV)) |
| I.S. EN 50290-2-20:2016 | COMMUNICATION CABLES - PART 2-20: COMMON DESIGN RULES AND CONSTRUCTION - GENERAL |
| DIN EN 840-1:2013-03 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 1: CONTAINERS WITH 2 WHEELS WITH A CAPACITY UP TO 400 L FOR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| UNI EN 840-1 : 2013 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 1: CONTAINERS WITH 2 WHEELS WITH A CAPACITY UP TO 400 L FOR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| UNI EN 840-4 : 2013 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG- AND/OR WIDE COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| EN 840-3:2012 | Mobile waste and recycling containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design |
| BS EN 840-2:2012 | Mobile waste and recycling containers Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices. Dimensions and design |
| UNI EN 840-3 : 2013 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 3: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH DOME LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| I.S. EN 840-4:2012 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG- AND/OR WIDE COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| I.S. EN 840-1:2012 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 1: CONTAINERS WITH 2 WHEELS WITH A CAPACITY UP TO 400 L FOR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| EN 840-1:2012 | Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design |
| I.S. EN 840-3:2012 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 3: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH DOME LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| EN 840-2:2012 | Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design |
| I.S. EN 840-2:2012 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| UNE-EN 840-2:2013 | Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design |
| UNE-EN 840-3:2013 | Mobile waste and recycling containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design |
| UNI EN 840-2 : 2013 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| BS EN 15342:2007 | Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates |
| EN 840-4:2012 | Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design |
| EN 15342:2007 | Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates |
| EN 15347:2007 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
| EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
| EN 15345:2007 | Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
| UNE-EN 62075:2013 | Audio/video, information and communication technology equipment - Environmentally conscious design |
| DIN EN 15551:2013-05 (Draft) | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| 16/30336759 DC : 0 | BS EN 50290-2-20 - COMMUNICATION CABLES - PART 2-20: COMMON DESIGN RULES AND CONSTRUCTION - GENERAL |
| CEI EN 62075 : 2013 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN |
| S.R. CEN/TS 16398:2012 | PLASTICS - TEMPLATE FOR REPORTING AND COMMUNICATION OF BIO-BASED CARBON CONTENT AND RECOVERY OPTIONS OF BIOPOLYMERS AND BIOPLASTICS - DATA SHEET |
| CEI EN 175301-801 : 2007 | DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS |
| I.S. EN IEC 61076-3-119:2018 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ |
| I.S. EN IEC 61076-2-111:2018 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING |
| DIN EN 16848:2015-04 (Draft) | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET |
| EN 62075:2012/AC:2013 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012) |
| DIN EN 840-2:2013-03 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1300 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| EN 60286-6:2004 | Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components |
| DIN EN 840-4:2013-02 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY UP TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG- AND/OR WIDE COMB LIFTING DEVICES - DIMENSIONS AND DESIGN |
| EN 61076-3-120:2016 | Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A |
| EN 61076-3-118 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
| ISO 472:2013 | Plastics — Vocabulary |
| ISO 1043-3:2016 | Plastics Symbols and abbreviated terms Part 3: Plasticizers |
| ISO 1043-2:2011 | Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| ISO 1043-4:1998 | Plastics Symbols and abbreviated terms Part 4: Flame retardants |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.