EN ISO 1463:2004
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
Superseded date
07-06-2021
Superseded by
Published date
26-05-2004
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Term and definitions
4 Principle
5 Factors relating to measurement uncertainty
5.1 Surface roughness
5.2 Taper of cross-section
5.3 Deformation of
5.4 Rounding of edge of coating
5.5 Overplating
5.6 Etching
5.7 Smearing
5.8 Magnification
5.9 Calibration of stage micrometer
5.10 Calibration of micrometer eyepiece
5.11 Alignment
5.12 Uniformity of magnification
5.13 Lens quality
5.14 Orientation of eyepiece
5.15 Tube length
6 Preparation of cross-sections
7 Measurement
8 Measurement uncertainty
9 Test report
Annex A (informative) Guidance on the preparation
and measurement of cross-sections
Annex B (informative) Taper of cross-section and
measurement of tooth-constructed coatings
Annex C (informative) Some typical etchants for
use at room temperature
Bibliography
ISO 1463:2002 describes a method for the measurement of the local thickness of metallic coatings, oxide layers, and porcelain or vitreous enamel coatings, by the microscopical examination of cross-sections using an optical microscope.
| Committee |
CEN/TC 262
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ONORM EN ISO 1463 : 2004 | Identical |
| DIN EN ISO 1463:2004-08 | Identical |
| I.S. EN ISO 1463:2004 | Identical |
| UNE-EN ISO 1463:2005 | Identical |
| NBN EN ISO 1463 : 2004 | Identical |
| NF EN ISO 1463 : 2004 | Identical |
| ISO 1463:2003 | Identical |
| SN EN ISO 1463 : 2004 | Identical |
| NS EN ISO 1463 : 2ED 2004 | Identical |
| PN EN ISO 1463 : 2006 | Identical |
| UNI EN ISO 1463 : 2006 | Identical |
| BS EN ISO 1463:2004 | Identical |
| NEN EN ISO 1463 : 2004 | Identical |
| BS EN 60745-1 : 2009 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| 10/30212123 DC : 0 | BS EN 845-1 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS |
| BS EN 2535:2011 | Aerospace series. Vacuum deposition of cadmium |
| I.S. EN 12373-1:2001 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 1: METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM |
| PREN 845-1 : DRAFT 2012 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS |
| 10/30212126 DC : 0 | BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS |
| 02/123296 DC : DRAFT SEP 2002 | BS EN ISO 2063 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS |
| BS EN 60335-2-71:2003 | Household and similar electrical appliances. Safety Particular requirements for electrical heating appliances for breeding and rearing animals |
| PREN 2133 : 200P1 | AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| I.S. EN 2535:2011 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| PREN 4827 : DRAFT 2015 | AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| I.S. EN 60335-2-47:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS (IEC 60335-2-47:2002 (EQV)) |
| I.S. EN 50144-1:1998 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS |
| BS EN 4827:2017 | Aerospace series. Hexavalent chromium free anodizing of aluminium and aluminium alloys |
| I.S. EN 60335-2-28:2003/A11:2018 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES |
| I.S. EN 62841-1:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 60335-2-12 : 2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES |
| BS EN 845-2 : 2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS |
| BS EN ISO 9220:1995 | Metallic coatings. Measurement of coating thickness. Scanning electron microscope method |
| 12/30263299 DC : 0 | BS EN 4826 - AEROSPACE SERIES - ZINC-NICKEL (12/16% NI) PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS AND ALUMINIUM ALLOYS FOR PARTS AND FASTENERS |
| EN 2133:2010 | Aerospace series - Cadmium plating of steels with specified tensile strength ≤ 1 450 MPa, copper, copper alloys and nickel alloys |
| EN 1071-10:2009 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning |
| EN 60335-2-39:2003/A2:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-39: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC MULTI-PURPOSE COOKING PANS |
| EN 62155:2003 | Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V |
| EN 60335-2-84:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-84: PARTICULAR REQUIREMENTS FOR TOILETS |
| EN 12540 : 2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND COPPER PLUS NICKEL PLUS CHROMIUM |
| EN 60335-2-38:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-38: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRIDDLES AND GRIDDLE GRILLS |
| EN 60335-2-12 : 2003 AMD 1 2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES |
| EN 12330 : 2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF CADMIUM ON IRON OR STEEL |
| DIN EN ISO 4527:2003-10 | METALLIC COATINGS - AUTOCATALYTIC (ELECTROLESS) NICKEL-PHOSPHORUS ALLOY COATINGS SPECIFICATION AND TEST METHODS |
| BS EN 1403:1998 | Corrosion protection of metals. Electrodeposited coatings. Method of specifying general requirements |
| CEI EN 62841-1 : 2016 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| 08/30185924 DC : 0 | BS EN 1071-10 - ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 10: DETERMINATION OF COATING THICKNESS BY CROSS SECTIONING |
| I.S. EN 12330:2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF CADMIUM ON IRON OR STEEL |
| I.S. EN 12329:2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON OR STEEL |
| BS EN 62155:2003 | Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V |
| 12/30271191 DC : 0 | BS EN 4827 - AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| 14/30299616 DC : 0 | BS EN 4474 - AEROSPACE SERIES - ALUMINIUM PIGMENTED COATINGS - COATING METHODS |
| CEI EN 62155 : 2004 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
| 07/30161646 DC : 0 | BS EN 15646 - ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| PREN 4474 : 200P2 | AEROSPACE SERIES - ALUMINIUM PIGMENTED COATINGS - COATING METHODS |
| PREN 4704 : 200P1 | AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODIZING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA) |
| BS EN 50144-1:1999 | Safety of hand-held electric motor operated tools General requirements |
| I.S. EN 50144-2-13:2002 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-13: PARTICULAR REQUIREMENTS FOR CHAIN SAWS |
| I.S. EN 60335-2-82:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES |
| I.S. EN 4704:2012 | AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODIZING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA) |
| I.S. EN 60335-2-81:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS (IEC 60335 -2-81:2002 (EQV)) |
| I.S. EN 4827:2017 | AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| EN 60335-2-74:2003/A2:2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-74: PARTICULAR REQUIREMENTS FOR PORTABLE IMMERSION HEATERS |
| I.S. EN 60335-2-86:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-86: PARTICULAR REQUIREMENTS FOR ELECTRIC FISHING MACHINES |
| PREN 17001 : DRAFT 2016 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - COATING SPECIFICATION |
| I.S. EN 62155:2003 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
| I.S. EN 60335-2-48:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL GRILLERS AND TOASTERS (IEC 60335-2-48:2002 (EQV)) |
| I.S. EN 60335-2-39:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-39: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC MULTI-PURPOSE COOKING PANS |
| EN 60335-2-9:2003/A13:2010/AC:2012 | Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances |
| BS EN 12540:2000 | Corrosion protection of metals. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium |
| BS EN 12329:2000 | Corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel |
| DIN EN 12329:2000-09 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON AND STEEL |
| DIN EN 1403:1998-10 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS - METHOD OF SPECIFYING GENERAL REQUIREMENTS |
| DIN EN 12540:2000-07 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND COPPER PLUS NICKEL PLUS CHROMIUM |
| I.S. EN 2133:2010 | AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| DIN EN 12330:2000-09 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF CADMIUM IRON OR STEEL |
| UNI EN 2133 : 2011 | AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| I.S. EN 845-2:2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS |
| I.S. EN 13858:2006 | CORROSION PROTECTION OF METALS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS ON IRON OR STEEL COMPONENTS |
| I.S. EN 2491:2011 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY LUBRICANTS - COATING METHODS |
| I.S. EN 845-1:2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS |
| VDE 0674-1 : 2001-12 | TESTS ON INDOOR AND OUTDOOR POST INSULATORS OF CERAMIC MATERIAL OR GLASS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV |
| DIN EN 60168 : 2001-12 | TESTS ON INDOOR AND OUTDOOR POST INSULATORS OF CERAMIC MATERIAL OR GLASS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV |
| VDI 2840:2005-11 | Carbon films - Basic knowledge, coating types and properties |
| VDI 3823 Blatt 4:2006-11 | Vacuum coating quality assurance - Testing of vacuum coated plastics |
| 17/30364786 DC : 0 | BS EN 4827 - AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| 12/30265756 DC : 0 | BS EN 845-1 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS |
| 09/30207944 DC : 0 | BS EN 2133 - AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| 17/30364785 DC : 0 | BS EN 4868 - AEROSPACE SERIES - ANODIC ELECTRODEPOSITION OF PRIMER |
| I.S. EN 60335-2-16:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS (IEC 60335-2-16:2002 (MOD)) |
| BS EN 60383-1:1998 | Insulators for overhead lines with a nominal voltage above 1000 V Ceramic or glass insulator units for a.c. systems. Definitions, test methods and acceptance criteria |
| BS EN 4704:2012 | Aerospace series. Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA) |
| I.S. CEN TS 1071-10:2004 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 10: DETERMINATION OF COATING THICKNESS BY CROSS SECTIONING |
| BS EN 60335-2-10 : 2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES |
| I.S. EN 60335-2-9:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-9: PARTICULAR REQUIREMENTS FOR GRILLS, TOASTERS AND SIMILAR PORTABLE COOKING APPLIANCES (IEC 60335-2-9:2002 (MOD)) |
| I.S. EN 60335-2-74:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-74: PARTICULAR REQUIREMENTS FOR PORTABLE IMMERSION HEATERS |
| I.S. EN 4826:2014 | AEROSPACE SERIES - ZINC-NICKEL (12%-16% NI) PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER ALLOYS, NICKEL ALLOYS AND ALUMINIUM ALLOYS FOR PARTS AND FASTENERS |
| I.S. EN 60335-2-26:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-26: PARTICULAR REQUIREMENTS FOR CLOCKS |
| BS EN 60335-2-50 : 2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-50: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BAINS-MARIE |
| UNI EN 1071-10 : 2009 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 10: DETERMINATION OF COATING THICKNESS BY CROSS SECTIONING |
| EN 60335-2-48 : 2003 AMD 11 2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRILLERS AND TOASTERS (IEC 60335-2-48:2002) |
| I.S. EN 1071-10:2009 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 10: DETERMINATION OF COATING THICKNESS BY CROSS SECTIONING |
| EN 60335-2-16:2003/A2:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS (IEC 60335-2-16:2002/A2:2011) |
| I.S. EN 60335-2-80:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS |
| DIN EN ISO 2063:2005-05 | THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS |
| BS EN 4826:2014 | Aerospace series. Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength ≤ 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners |
| BS EN ISO 14923:2003 | Thermal spraying. Characterization and testing of thermally sprayed coatings |
| ISO 3882:2003 | Metallic and other inorganic coatings — Review of methods of measurement of thickness |
| EN 60745-1:2009/A11:2010 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 60335-2-28:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES |
| EN 60745-1:2006 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 1403:1998 | Corrosion protection of metals - Electrodeposited coatings - Method of specifying general requirements |
| EN ISO 14923:2003 | Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003) |
| EN ISO 4527:2003 | Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods (ISO 4527:2003) |
| UNI EN 2491 : 2012 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY LUBRICANTS - COATING METHODS |
| I.S. EN 60335-2-50:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPARATUS - SAFETY - PART 2-50: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BAINS-MARIE |
| BS EN 1071-10:2009 | Advanced technical ceramics. Methods of test for ceramic coatings Determination of coating thickness by cross sectioning |
| 14/30296592 DC : 0 | BS EN 4474 - AEROSPACE SERIES - ALUMINIUM PIGMENTED COATINGS - COATING METHODS |
| I.S. EN ISO 2063:2005 | THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS |
| I.S. EN 1403:1999 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS - METHOD OF SPECIFYING GENERAL REQUIREMENTS |
| BS EN 4474:2009 | Aerospace series. Aluminium pigmented coatings. Coating methods |
| PREN 14592 : DRAFT 2017 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| I.S. EN 60335-2-10:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES |
| I.S. EN 60335-2-23:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-23: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN OR HAIR CARE |
| I.S. EN 60335-2-38:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-38: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRIDDLES AND GRIDDLE GRILLS |
| I.S. EN 60335-2-12:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES |
| I.S. EN 4474:2016 | AEROSPACE SERIES - ALUMINIUM PIGMENTED COATINGS - COATING METHODS |
| PREN 845-2 : DRAFT 2012 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS |
| I.S. EN 60745-1:2009 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60335-2-84:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-84: PARTICULAR REQUIREMENTS FOR TOILETS |
| I.S. EN 60335-2-45:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES (IEC 60335-2-45:2002 (EQV)) |
| I.S. EN 60335-2-41:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS |
| I.S. EN 60335-2-71:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS |
| EN 60335-2-47:2003/A11:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS (IEC 60335-2-47:2002) |
| EN 60335-2-82:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES |
| DIN EN ISO 2064:2000-06 | METALLIC AND OTHER NON-ORGANIC COATINGS - DEFINITIONS AND CONVENTIONS CONCERNING THE MEASUREMENT OF THICKNESS |
| DIN EN ISO 3882:2003-10 | Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
| BS EN 845-1 : 2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS |
| BS EN ISO 2063:2005 | Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys |
| BS EN 13858:2006 | Corrosion protection of metals. Non-electrolytically applied zinc flake coatings on iron or steel components |
| BS EN ISO 3882:2003 | Metallic and other inorganic coatings. Review of methods of measurement of thickness |
| BS EN ISO 12683:2004 | Mechanically deposited coatings of zinc. Specification and test methods |
| BS EN 2491:2011 | Aerospace series. Molybdenum disulphide dry lubricants. Coating methods |
| BS EN ISO 4516:2002 | Metallic and other inorganic coatings. Vickers and Knoop microhardness tests |
| ISO 2063:2005 | Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys |
| ISO 2361:1982 | Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating thickness — Magnetic method |
| ISO 14923:2003 | Thermal spraying Characterization and testing of thermally sprayed coatings |
| ISO 12683:2004 | Mechanically deposited coatings of zinc Specification and test methods |
| ISO 4516:2002 | Metallic and other inorganic coatings — Vickers and Knoop microhardness tests |
| BS EN ISO 2064:2000 | Metallic and other inorganic coatings. Definitions and conventions concerning the measurement of thickness |
| BS EN 2133:2010 | Aerospace series. Cadmium plating of steels with specified tensile strength ≤ 1450 MPa, copper, copper alloys and nickel alloys |
| BS EN 62841-1:2015 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements |
| BS EN 12330:2000 | Corrosion protection of metals. Electrodeposited coatings of cadmium on iron or steel |
| EN 4827:2017 | Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys |
| EN 845-2:2013+A1:2016 | Specification for ancillary components for masonry - Part 2: Lintels |
| EN 845-1:2013+A1:2016 | Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets |
| EN ISO 4516:2002 | Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002) |
| EN ISO 2064:2000 | Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996) |
| EN 13858:2006 | Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components |
| EN ISO 2063:2005 | Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005) |
| EN 4704:2012 | Aerospace series - Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA) |
| EN ISO 12683:2004 | Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004) |
| I.S. EN ISO 9220:1995 | METALLIC COATINGS - MEASUREMENT OF COATING THICKNESS - SCANNING ELECTRON MICROSCOPE METHOD |
| EN ISO 9220:1994 | Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988) |
| EN ISO 3882:2003 | Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
| EN ISO 2361:1995 | Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2361:1982) |
| EN 2535:2011 | Aerospace series - Vacuum deposition of cadmium |
| EN 2491:2011 | Aerospace series - Molybdenum disulphide dry lubricants - Coating methods |
| EN 4826:2014 | Aerospace series - Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength ≤ 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners |
| I.S. EN 12540:2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND COPPER PLUS NICKEL PLUS CHROMIUM |
| UNI EN 2535 : 2012 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| 12/30265747 DC : 0 | BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS |
| BS EN 50144-2-13:2002 | Safety of hand-held electric motor operated tools Particular requirements for chain saws |
| DIN EN 1071-10:2009-10 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning |
| 10/30215608 DC : 0 | BS EN 4704 - AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODISING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA) |
| DD CEN/TS 1071-10:2004 | Advanced technical ceramics. Methods of test for ceramic coatings Determination of coating thickness by cross section |
| PREN 4868 : DRAFT 2018 | AEROSPACE SERIES - ANODIC ELECTRODEPOSITION OF HEXAVALENT CHROMIUM FREE PRIMER |
| I.S. EN 60335-2-51:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-51: PARTICULAR REQUIREMENTS FOR STATIONARY CIRCULATION PUMPS FOR HEATING AND SERVICE WATER INSTALLATIONS (IEC 60335-2-51:2002 (EQV)) |
| UNI EN 4704 : 2013 | AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODIZING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA) |
| 16/30339220 DC : 0 | BS EN 17001 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - COATING SPECIFICATION |
| NF EN 2535 : 2012 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| EN 4474:2016 | Aerospace series - Aluminium pigmented coatings - Coating methods |
| BS EN 12373-1:2001 | Aluminium and aluminium alloys. Anodizing Method for specifying decorative and protective anodic oxidation coatings on aluminium |
| BS EN 10240:1998 | Internal and/or external protective coatings for steel tubes. Specification for hot dip galvanized coatings applied in automatic plants |
| ISO 4527:2003 | Metallic coatings Autocatalytic (electroless) nickel-phosphorus alloy coatings Specification and test methods |
| ISO 9220:1988 | Metallic coatings Measurement of coating thickness Scanning electron microscope method |
| EN 60335-2-81:2003/A2:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-81: PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS (IEC 60335-2-81:2002/A2:2011) |
| EN 60335-2-71 : 2003 AMD 1 2007 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS |
| EN 12329 : 2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON OR STEEL |
| EN 60335-2-80:2003/A2:2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS |
| EN 62841-1:2015/AC:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 60335-2-50:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-50: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BAINS-MARIE |
| CEN/TS 1071-10:2004 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning |
| EN 12373-1 : 2001 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 1: METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM |
| DIN EN ISO 14923:2003-10 | THERMAL SPRAYING - CHARACTERIZATION AND TESTING OF THERMALLY SPRAYED COATINGS |
| EN 60335-2-10:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES |
| EN 60335-2-51:2003/A2:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-51: PARTICULAR REQUIREMENTS FOR STATIONARY CIRCULATION PUMPS FOR HEATING AND SERVICE WATER INSTALLATIONS (IEC 60335-2-51:2002/A2:2011) |
| EN 10240:1997 | Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
| EN 50144-2-13:2002 | Safety of hand-held electric motor operated tools - Part 2-13: Particular requirements for chain saws |
| EN 60335-2-23:2003/A2:2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-23: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN OR HAIR CARE (IEC 60335-2-23:2003/A2:2012, MODIFIED) |
| DIN EN ISO 4516:2002-10 | Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002) |
| EN 50144-1 : 98 COR 2005 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS |
| EN 60335-2-45:2002/A2:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES (IEC 60335-2-45:2002/A2:2011) |
| DIN EN ISO 12683:2005-02 | Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004); German version EN ISO 12683:2004 |
| DIN EN 13858:2007-02 | Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components |
| PREN 4826 : DRAFT 2013 | AEROSPACE SERIES - ZINC-NICKEL (12-16% NI) PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER ALLOYS, NICKEL ALLOYS AND ALUMINIUM ALLOYS FOR PARTS AND FASTENERS |
| EN ISO 2064:2000 | Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996) |
| ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.