EN ISO 15027-2:2012
Current
The latest, up-to-date edition.
Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012)
01-11-2012
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Marking
6 Information supplied by the manufacturer
7 Consumer information at point of sale
Annex A (informative) - Guidelines for manufacturers, users,
regulators and industrial inspectors about immersion
suits with respect to the application of thermal
protection times relevant to the ISO 15027 series
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of
EU Directive 89/686/EEC
Bibliography
ISO 15027-2:2012 specifies performance and safety requirements for abandonment suits in emergency situations in work and leisure activities to protect the body of a user against the effects of cold water immersion, such as cold shock and hypothermia, including head, hand and feet protection.It is applicable for dry and wet abandonment suits.Constant wear suits are not covered by ISO 15027-2:2012. The requirements of constant wear suits are given in ISO 15027-1. Test methods are given in ISO 15027-3.
| Committee |
CEN/TC 162
|
| DevelopmentNote |
Supersedes PREN ISO 15027-2. (12/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| PN EN ISO 15027-2 : 2013 | Identical |
| NS EN ISO 15027-2 : 2012 | Identical |
| ISO 15027-2:2012 | Identical |
| UNE-EN ISO 15027-2:2013 | Identical |
| NEN EN ISO 15027-2 : 2012 | Identical |
| UNI EN ISO 15027-2 : 2012 | Identical |
| NF EN ISO 15027-2 : 2013 | Identical |
| BS EN ISO 15027-2:2012 | Identical |
| DIN EN ISO 15027-2:2013-03 | Identical |
| NBN EN ISO 15027-2 : 2013 | Identical |
| SN EN ISO 15027-2 : 2013 | Identical |
| I.S. EN ISO 15027-2:2012 | Identical |
| OLF 094 : 2004 | |
| 02/564505 DC : DRAFT OCT 2002 | BS EN ISO 12402-10 - PERSONAL FLOTATION DEVICES - PART 10: SELECTION AND APPLICATION OF FLOTATION DEVICES AND OTHER RELEVANT DEVICES |
| ISO 15027-3:2012 | Immersion suits Part 3: Test methods |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| ISO 12402-5:2006 | Personal flotation devices Part 5: Buoyancy aids (level 50) Safety requirements |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| ISO 13688:2013 | Protective clothing — General requirements |
| ISO 12402-3:2006 | Personal flotation devices Part 3: Lifejackets, performance level 150 Safety requirements |
| ISO 2411:2017 | Rubber- or plastics-coated fabrics — Determination of coating adhesion |
| ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| ISO 12402-2:2006 | Personal flotation devices Part 2: Lifejackets, performance level 275 Safety requirements |
| ISO 105-E02:2013 | Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water |
| ISO 12401:2009 | Small craft — Deck safety harness and safety line — Safety requirements and test methods |
| ISO 12402-8:2006 | Personal flotation devices Part 8: Accessories Safety requirements and test methods |
| ISO 7854:1995 | Rubber- or plastics-coated fabrics Determination of resistance to damage by flexing |
| ISO 12402-6:2006 | Personal flotation devices Part 6: Special purpose lifejackets and buoyancy aids Safety requirements and additional test methods |
| ISO 3801:1977 | Textiles — Woven fabrics — Determination of mass per unit length and mass per unit area |
| ISO 12402-4:2006 | Personal flotation devices Part 4: Lifejackets, performance level 100 Safety requirements |
| ISO 12402-9:2006 | Personal flotation devices Part 9: Test methods |
| ISO 105-X12:2016 | Textiles Tests for colour fastness Part X12: Colour fastness to rubbing |
| EN 340:2003 | Protective clothing - General requirements |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
| ISO 12402-7:2006 | Personal flotation devices Part 7: Materials and components Safety requirements and test methods |
| ISO 4674-1:2016 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.