EN ISO 17078-2:2007/AC:2009

Current

Current The latest, up-to-date edition.

PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS

Available format(s):

Language(s):

Published date: 04-11-2009

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
  4.1 Abbreviations
  4.2 Symbols and engineering terms
5 Functional specification
  5.1 General
  5.2 Functional characteristics
  5.3 Well parameters
  5.4 Operational parameters
  5.5 Compatibility with well-related equipment
  5.6 Environmental service classes
  5.7 Design validation grades
  5.8 Product functional testing grades
  5.9 Quality control grades
  5.10 Additional required testing
6 Technical specification
  6.1 General requirements
  6.2 Technical characteristics
  6.3 Design criteria
  6.4 Allowable design changes
  6.5 Design verification and validation requirements
  6.6 Product functional testing requirements
7 Supplier/manufacturer requirements
  7.1 General
  7.2 Documentation and data control
  7.3 Product identification requirements
  7.4 Quality control requirements
  7.5 Heat-treating-equipment qualification
  7.6 Welding requirements
  7.7 Non-destructive examination requirements
  7.8 Storage and shipping preparation
  7.9 Allowable changes after manufacturing
  7.10 Reconditioning of flow-control devices
Annex A (normative) - Design validation and product
                      functional testing requirements
Annex B (normative) - Environmental service classes
Annex C (normative) - Design validation grades
Annex D (normative) - Product functional testing grades
Annex E (normative) - Interface testing requirements
Annex F (normative) - Insertion testing requirements
Annex G (normative) - Probe and travel testing and load
                      rate determination
Annex H (normative) - Dynamic flow testing and flow
                      coefficient calculation
Annex I (normative) - Back-check testing
Annex J (normative) - Opening and closing pressure testing
Annex K (normative) - Bellows actuation life cycle testing
Annex L (normative) - Erosion testing requirements
Annex M (normative) - Shelf (bellows integrity) testing
                      requirements for nitrogen-pressure-charged
                      flow-control devices
Annex N (normative) - Conducting port/seat leakage rate testing
Annex O (informative) - Performance testing - Recommendations
                        for a flow-control device performance
                        test facility
Annex P (informative) - Performance testing - Prediction
                        correlations using a simplified flow
                        control device performance model
Bibliography

Abstract - (Show below) - (Hide below)

Describes requirements for subsurface flow-control devices used in side-pocket mandrels (hereafter called flow-control devices) intended for use in the worldwide petroleum and natural gas industry.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 12
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
UNE-EN ISO 17078-2:2007/AC:2009	Identical
ISO 17078-2:2007/Cor 1:2009	Identical
NBN EN ISO 17078-2 : 2008 COR 2009	Identical
BS EN ISO 17078-2:2007	Identical
NF EN ISO 17078-2 : 2009	Identical
PN EN ISO 17078-2 : 2011	Identical
ISO 17078-2:2007	Identical
NEN EN ISO 17078-2 : 2008 C1 2009	Identical
SN EN ISO 17078-2 : 2008 CORR 2010	Identical
UNI EN ISO 17078-2 : 2009	Identical
DIN EN ISO 17078-2:2010-08	Identical
I.S. EN ISO 17078-2:2007	Identical
NS EN ISO 17078-2 : 2007 AC 2009	Identical

Standards Referencing This Book - (Show below) - (Hide below)

ISO 80000-4:2006	Quantities and units Part 4: Mechanics
ISO 6506-1:2014	Metallic materials Brinell hardness test Part 1: Test method
ASNT SNT TC 1A : 2016	TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL
ASME PV CODE 9 : 2017	BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
ISO 9712:2012	Non-destructive testing Qualification and certification of NDT personnel
ASME PV CODE 8 DIV 1 : 2017	BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1
ISO 6508-1:2016	Metallic materials — Rockwell hardness test — Part 1: Test method
ISO 14313:2007	Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves
ASME B31.8 : 2016	Gas Transmission and Distribution Piping Systems
ISO 6892:1998	Metallic materials Tensile testing at ambient temperature
API 14A : 2015	SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
SAE AS 568 : 2014	AEROSPACE SIZE STANDARD FOR O-RINGS
MIL-STD-1916 Base Document:1996	DOD PREFERRED METHODS FOR ACCEPTANCE OF PRODUCT
NACE MR 01 75 : 2003	METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS
ISO 31-0:1992	Quantities and units Part 0: General principles
ANSI/NCSL Z540 1 : 94(R2002)	CALIBRATION - CALIBRATION LABORATORIES AND MEASURING AND TEST EQUIPMENT - GENERAL REQUIREMENTS
ASME B1.20.1 : 2013(R2018)	PIPE THREADS, GENERAL PURPOSE (INCH)
API MPM CH14.2 : 2ED 1994(R2012)	MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 14.2: COMPRESSIBILITY FACTORS OF NATURAL GAS AND OTHER RELATED HYDROCARBON GASES
AGA REPORT 8 : 92 REPRINT 94	COMPRESSIBILITY AND SUPERCOMPRESSIBILITY FOR NATURAL GAS AND OTHER HYDROCARBON GASES TRANSMISSION MEASUREMENT
ISO 17078-3:2009	Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels
API 6D :2015	SPECIFICATION FOR PIPELINE AND PIPING VALVES
ASME B16.5 : 2017	PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
ASME B16.34 : 2017	VALVES - FLANGED, THREADED, AND WELDING END
ASME PV CODE 5 : 2017	BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION
ISO 9000:2015	Quality management systems — Fundamentals and vocabulary
ISO 10432:2004	Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment
BS 2M 54:1991	Specification for temperature control in the heat treatment of metals
SAE AMS H 6875 : 2010	HEAT TREATMENT OF STEEL RAW MATERIALS
ISO 17078-1:2004	Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels
MIL-STD-413 Revision C:1980	VISUAL INSPECTION GUIDE FOR ELASTOMERIC O-RINGS
ISO 11960:2014	Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart