![header thumbnail](/images/img-default-logo.png)
EN ISO 17662:2016
Current
The latest, up-to-date edition.
![header thumbnail](/images/img-default-logo.png)
Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016)
23-03-2016
European foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Process data common to more than one
welding/brazing process
6 Metal arc welding without gas protection (group 11)
7 Plasma arc welding (group 15)
8 Resistance welding (groups 21, 22, 23, 24, and 25)
9 Gas welding (group 3)
10 Friction welding (group 42)
11 Laser beam welding (group 52)
12 Electron beam welding (group 51)
13 Stud welding (group 78)
14 Brazing (group 9)
15 Preheat and/or post weld heat treatment
16 Post weld cleaning
17 Flame cutting (group 81) and other ancillary processes
Annex A (informative) - Details for stud welding
Annex B (informative) - Acceptance testing of equipment
Annex C (informative) - Parties involved
Bibliography
ISO 17662:2016 specifies requirements for calibration, verification and validation of equipment used for- control of process variables during fabrication, and- control of the properties of equipment used for welding or welding allied processeswhere the resulting output cannot be readily or economically documented by subsequent monitoring, inspection and testing. This involves process variables influencing the fitness-for-purpose and in particular the safety of the fabricated product.NOTE 1 This International Standard is based on the lists of process variables stated in International Standards for specification of welding procedures, in particular, but not exclusively in the ISO 15609‑ series. Future revisions of these International Standards can result in addition or deletion of parameters considered necessary to specify.Some guidance is, in addition, given in Annex B as regards requirements for calibration; verification and validation as part of acceptance testing of equipment used for welding or allied processes.Requirements to calibrate, verify and validate as part of inspection, testing, non-destructive testing or measuring of final welded products performed in order to verify confirm product compliance are outside the scope of the present International Standard.The subject of this International Standard is limited to calibration, verification and validation of equipment after installation, as part of the workshops' and site operations for maintenance and/or operation.It needs to be stressed that this International Standard has nothing to do with manufacture and installation of equipment for welding. Requirements for new equipment are formulated in directives and product codes (standards), as necessary.Annex C provides information when other parties are involved in calibration, verification and validation activities.
Committee |
CEN/TC 121
|
DevelopmentNote |
Supersedes PREN ISO 17662 (10/2005)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
SS-EN ISO 17662:2016 | Identical |
PN EN ISO 17662 : 2016 | Identical |
NEN EN ISO 17662 : 2016 | Identical |
I.S. EN ISO 17662:2016 | Identical |
UNI EN ISO 17662 :2016 | Identical |
NS EN ISO 17662 : 2005 | Identical |
UNI EN ISO 17662 : 2007 | Identical |
BS EN ISO 17662:2016 | Identical |
DIN EN ISO 17662:2016-09 | Identical |
SN EN ISO 17662 : 2016 | Identical |
NF EN ISO 17662 : 2016 | Identical |
ISO 17662:2016 | Identical |
NBN EN ISO 17662 : 2016 | Identical |
UNE-EN ISO 17662:2016 | Identical |
BS EN 1011-6:2005 | Welding. Recommendations for welding of metallic materials Laser beam welding |
EN 1011-1:2009 | Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding |
CEI EN 50504 : 2009 | VALIDATION OF ARC WELDING EQUIPMENT |
11/30253901 DC : 0 | BS EN 13445-5 - UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
EN 13445-5 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
UNE-EN 13445-5:2015 | Unfired pressure vessels - Part 5: Inspection and testing |
DIN EN 1011-1:2009-07 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING |
DIN EN 1011-6:2006-03 | WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
I.S. EN 1011-1:2009 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING |
EN 1011-6:2005 | Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding |
UNI EN 1011-1 : 2009 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING |
06/30160338 DC : 0 | BS EN 50504 - VALIDATION OF ARC WELDING EQUIPMENT |
UNI EN 13445-5 : 2015 | UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
I.S. EN 1011-6:2006 | WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
BS EN 1011-1:2009 | Welding. Recommendations for welding of metallic materials General guidance for arc welding |
BS EN 50504:2008 | Validation of arc welding equipment |
PREN 13445-5 : DRAFT 2011 | UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
BS EN 13445-5 : 2014 | UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
I.S. EN 50504:2008 | VALIDATION OF ARC WELDING EQUIPMENT |
I.S. EN 13445-5:2014 | UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
EN 50504:2008 | Validation of arc welding equipment |
ISO 3834-1:2005 | Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of quality requirements |
ISO 5172:2006 | Gas welding equipment Blowpipes for gas welding, heating and cutting Specifications and tests |
ISO 14555:2017 | Welding — Arc stud welding of metallic materials |
ISO 14554-2:2013 | Quality requirements for welding — Resistance welding of metallic materials — Part 2: Elementary quality requirements |
ISO 5171:2009 | Gas welding equipment Pressure gauges used in welding, cutting and allied processes |
ISO 14744-5:2000 | Welding Acceptance inspection of electron beam welding machines Part 5: Measurement of run-out accuracy |
ISO 8206:1991 | Acceptance tests for oxygen cutting machines — Reproducible accuracy — Operational characteristics |
ISO 3834-4:2005 | Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements |
ISO 15614-11:2002 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 11: Electron and laser beam welding |
ISO 15620:2000 | Welding Friction welding of metallic materials |
ISO/TR 16060:2003 | Destructive tests on welds in metallic materials Etchants for macroscopic and microscopic examination |
ISO 15616-2:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 2: Measurement of static and dynamic accuracy |
ISO 15616-4:2008 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 4: Machines with 2-D moving optics |
ISO 14744-3:2000 | Welding Acceptance inspection of electron beam welding machines Part 3: Measurement of beam current characteristics |
EN 50505:2008 | Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for resistance welding and allied processes |
ISO 15609-3:2004 | Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 3: Electron beam welding |
ISO 14744-1:2008 | Welding — Acceptance inspection of electron beam welding machines — Part 1: Principles and acceptance conditions |
ISO 14744-4:2000 | Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed |
ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements |
ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
EN 50504:2008 | Validation of arc welding equipment |
IEC 62135-2:2015 | Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements |
IEC 62135-1:2015 | Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation |
ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
ISO 17637:2016 | Non-destructive testing of welds Visual testing of fusion-welded joints |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 22827-1:2005 | Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 1: Laser assembly |
ISO 669:2016 | Resistance welding Resistance welding equipment Mechanical and electrical requirements |
ISO 22827-2:2005 | Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 2: Moving mechanism |
EN 13134:2000 | Brazing - Procedure approval |
ISO 14554-1:2013 | Quality requirements for welding — Resistance welding of metallic materials — Part 1: Comprehensive quality requirements |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
ISO 15609-2:2001 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 2: Gas welding |
ISO 15609-5:2011 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding |
ISO 15616-1:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 1: General principles, acceptance conditions |
ISO 14744-6:2000 | Welding Acceptance inspection of electron beam welding machines Part 6: Measurement of stability of spot position |
ISO 14744-2:2000 | Welding Acceptance inspection of electron beam welding machines Part 2: Measurement of accelerating voltage characteristics |
ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
ISO 15616-3:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 3: Calibration of instruments for measurement of gas flow and pressure |
ISO 15609-4:2009 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 4: Laser beam welding |
EN 60974-1:2012 | Arc welding equipment - Part 1: Welding power sources |
ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements |
ISO 6947:2011 | Welding and allied processes Welding positions |
ISO 5826:2014 | Resistance welding equipment Transformers General specifications applicable to all transformers |
ISO/TR 18491:2015 | Welding and allied processes — Guidelines for measurement of welding energies |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.