EN ISO 19906:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Petroleum and natural gas industries - Arctic offshore structures (ISO 19906:2010)
06-09-2019
15-12-2010
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 General requirements and conditions
6 Physical environmental conditions
7 Reliability and limit states design
8 Actions and action effects
9 Foundation design
10 Man-made islands
11 Fixed steel structures
12 Fixed concrete structures
13 Floating structures
14 Subsea production systems
15 Topsides
16 Other ice engineering topics
17 Ice management
18 Escape, evacuation and rescue
Annex A (informative) - Additional information and guidance
Annex B (informative) - Regional information
Bibliography
ISO 19906:2010 specifies requirements and provides recommendations and guidance for the design, construction, transportation, installation and removal of offshore structures, related to the activities of the petroleum and natural gas industries in arctic and cold regions. Reference to arctic and cold regions in ISO 19906:2010 is deemed to include both the Arctic and other cold regions that are subject to similar sea ice, iceberg and icing conditions. The objective of ISO 19906:2010 is to ensure that offshore structures in arctic and cold regions provide an appropriate level of reliability with respect to personnel safety, environmental protection and asset value to the owner, to the industry and to society in general.ISO 19906:2010 does not contain requirements for the operation, maintenance, service-life inspection or repair of arctic and cold region offshore structures, except where the design strategy imposes specific requirements.While ISO 19906:2010 does not apply specifically to mobile offshore drilling units (see ISO 19905‑1), the procedures relating to ice actions and ice management contained herein are applicable to the assessment of such units.ISO 19906:2010 does not apply to mechanical, process and electrical equipment or any specialized process equipment associated with arctic and cold region offshore operations except in so far as it is necessary for the structure to sustain safely the actions imposed by the installation, housing and operation of such equipment.
Committee |
CEN/TC 12
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
ONORM EN ISO 19906 : 2011 | Identical |
NF EN ISO 19906 : 2013 | Identical |
BS EN ISO 19906:2010 | Identical |
UNI EN ISO 19906 : 2012 | Identical |
PN EN ISO 19906 : 2011 | Identical |
NS EN ISO 19906 : 2010 | Identical |
SN EN ISO 19906 : 2011 | Identical |
DIN EN ISO 19906:2011-04 | Identical |
I.S. EN ISO 19906:2010 | Identical |
UNE-EN ISO 19906:2010 | Identical |
ISO 19906:2010 | Identical |
NBN EN ISO 19906 : 2011 | Identical |
NEN EN ISO 19906 : 2010 | Identical |
ISO 12494:2017 | Atmospheric icing of structures |
ISO 15649:2001 | Petroleum and natural gas industries — Piping |
ISO 19901-6:2009 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 6: Marine operations |
ISO 19901-2:2017 | Petroleum and natural gas industries Specific requirements for offshore structures Part 2: Seismic design procedures and criteria |
ISO 19900:2013 | Petroleum and natural gas industries General requirements for offshore structures |
NORSOK N-003:2017 | ACTIONS AND ACTIONS EFFECTS |
AISC 325 : 2017 | STEEL CONSTRUCTION MANUAL |
CSA S16 : 2014 | DESIGN OF STEEL STRUCTURES |
SNIP 2.06.04-82 : 1982 | WAVE, ICE, AND SHIP LOADS AND EFFECTS ON HYDRAULIC STRUCTURES |
API BULL 2V : 2004 | DESIGN OF FLAT PLATE STRUCTURES |
ISO 19901-7:2013 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units |
ASCE 4 98 : 2000 | SEISMIC ANALYSIS OF SAFETY-RELATED NUCLEAR STRUCTURES AND COMMENTARY |
ISO 19903:2006 | Petroleum and natural gas industries Fixed concrete offshore structures |
ISO 17776:2016 | Petroleum and natural gas industries Offshore production installations Major accident hazard management during the design of new installations |
ISO 15544:2000 | Petroleum and natural gas industries — Offshore production installations — Requirements and guidelines for emergency response |
NORSOK M 630 : REV 6 | MATERIAL DATA SHEETS AND ELEMENT DATA SHEETS FOR PIPING |
ISO 2631-4:2001 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems |
ISO 15027-1:2012 | Immersion suits Part 1: Constant wear suits, requirements including safety |
ISO 19904-1:2006 | Petroleum and natural gas industries Floating offshore structures Part 1: Monohulls, semi-submersibles and spars |
ISO 19901-4:2016 | Petroleum and natural gas industries Specific requirements for offshore structures Part 4: Geotechnical and foundation design considerations |
ISO 19901-3:2014 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure |
ASTM D 420 : 1998 | Guide to Site Characterization for Engineering, Design, and Construction Purposes |
ACI 306R : 2016 | GUIDE TO COLD WEATHER CONCRETING |
ISO 19902:2007 | Petroleum and natural gas industries Fixed steel offshore structures |
ISO 2631-2:2003 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz) |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
ASTM C 671 : 1994 | Standard Test Method for Critical Dilation of Concrete Specimens Subjected to Freezing (Withdrawn 2003) |
ASTM C 330 : 2005 | Standard Specification for Lightweight Aggregates for Structural Concrete |
CGSB 65.16 : 2005 | IMMERSION SUIT SYSTEMS |
ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
ISO 19901-1:2015 | Petroleum and natural gas industries Specific requirements for offshore structures Part 1: Metocean design and operating considerations |
ISO 13702:2015 | Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines |
CSA S471 : 2004 | GENERAL REQUIREMENTS, DESIGN CRITERIA, THE ENVIRONMENT, AND LOADS |
ISO 2631-5:2004 | Mechanical vibration and shock Evaluation of human exposure to whole-body vibration Part 5: Method for evaluation of vibration containing multiple shocks |
ISO 13623:2017 | Petroleum and natural gas industries — Pipeline transportation systems |
NS 3472 : 2001 | STEEL STRUCTURES - DESIGN RULES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.