NORSOK M 630 : REV 6
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
MATERIAL DATA SHEETS AND ELEMENT DATA SHEETS FOR PIPING
Published date
12-01-2013
Publisher
Superseded date
08-12-2020
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Material data sheets (MDSs)
5 Element data sheets (EDSs)
Annex A (normative) - Material data sheets (MDSs)
Annex B (normative) - Element data sheets (EDSs)
Contains material requirement in a collection of MDS' for use in piping systems, selected according to NORSOK L-001.
| Committee |
K 114/EG M
|
| DocumentType |
Standard
|
| PublisherName |
Norsk Sokkels Konkuranseposisjon
|
| Status |
Superseded
|
| BS EN ISO 27509:2012 | Petroleum and natural gas industries. Compact flanged connections with IX seal ring |
| 14/30304346 DC : 0 | BS EN ISO 17782 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION OF MANUFACTURERS OF SPECIAL MATERIALS |
| API 2N : 2015 | PLANNING, DESIGNING, AND CONSTRUCTING STRUCTURES AND PIPELINES FOR ARCTIC CONDITIONS |
| EEMUA 194 : 2012 | GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT |
| 11/30173941 DC : 0 | BS EN ISO 27509 - PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING |
| 17/30298929 DC : DRAFT SEP 2017 | BS EN ISO 19906 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
| ISO 19906:2010 | Petroleum and natural gas industries — Arctic offshore structures |
| I.S. EN ISO 27509:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING (ISO 27509:2012) |
| EEMUA 218 : 2010 | QUALITY REQUIREMENTS FOR THE MANUFACTURE AND SUPPLY OF DUPLEX STAINLESS STEELS |
| EEMUA 182 : 2004 | SPECIFICATION FOR INTEGRAL BLOCK AND BLEED VALVE MANIFOLDS FOR DIRECT CONNECTION TO PIPEWORK |
| 09/19984091 DC : DRAFT JAN 2009 | BS EN ISO 19906 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
| API STD 17F : 2017 | SUBSEA PRODUCTION CONTROL SYSTEMS |
| EN ISO 19906:2010 | Petroleum and natural gas industries - Arctic offshore structures (ISO 19906:2010) |
| BS EN ISO 19906:2010 | Petroleum and natural gas industries. Arctic offshore structures |
| NORSOK M 001:2014 | MATERIALS SELECTION |
| I.S. EN ISO 19906:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
| OLF 075 : 2015 | RECOMMENDED GUIDELINES FOR WATER-BASED FIREFIGHTING SYSTEMS |
| ISO 27509:2012 | Petroleum and natural gas industries — Compact flanged connections with IX seal ring |
| ISO 10684:2004 | Fasteners — Hot dip galvanized coatings |
| ASTM B 363 : 2014 : REDLINE | Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings |
| EEMUA 145 : 1986 | 90/10 COPPER NICKEL ALLOY PIPING FOR OFFSHORE APPLICATIONS - SPECIFICATION - FLANGES COMPOSITE AND SOLID |
| ASTM B 338 : 2017 : REDLINE | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
| ASTM B 348 : 2013 : REDLINE | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
| ASTM B 265 : 2015 : REDLINE | Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
| EEMUA 144 : 1986 | 90/10 COPPER NICKEL ALLOY PIPING FOR OFFSHORE APPLICATIONS - SPECIFICATION - TUBES SEAMLESS AND WELDED |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| ISO 9712:2012 | Non-destructive testing — Qualification and certification of NDT personnel |
| ASTM B 467 : 2014 : REDLINE | Standard Specification for Welded Copper-Nickel Pipe |
| ASTM E 562 : 2011 : REDLINE | Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count |
| EN 12201-3:2011+A1:2012 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| ASTM A 516/A516M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
| ASME B31.3:2016 | PROCESS PIPING |
| ISO 3183:2012 | Petroleum and natural gas industries — Steel pipe for pipeline transportation systems |
| ASTM B 834 : 2017 : REDLINE | Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367), Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625), Nickel-Chromium-Iron Alloys (UNS N06600 and N06690), and Nickel-Chromium-Iron-Columbium-Molybdenum (UNS N07718) Alloy Pipe Flanges, Fittings, Valves, and Parts |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| API 5L : 2012 | LINE PIPE |
| ASTM A 1082/A1082M : 2016 : REDLINE | Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications |
| ASTM A 995 : 1998 | Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ISO 15156-2:2015 | Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
| ISO 15156-3:2015 | Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
| ASTM A 928/A928M : 2014 : REDLINE | Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal |
| EN 12201-5:2011 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
| ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings |
| ISO 15614-5:2004 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 5: Arc welding of titanium, zirconium and their alloys |
| ASTM B 861 : 2014 : REDLINE | Standard Specification for Titanium and Titanium Alloy Seamless Pipe |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| MSS SP 44 : 2016 | STEEL PIPELINE FLANGES |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 12201-2:2011+A1:2013 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes |
| ISO 10423:2009 | Petroleum and natural gas industries — Drilling and production equipment — Wellhead and christmas tree equipment |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| ASTM B 705 : 2017 : REDLINE | Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe |
| ISO 3601-1:2012 | Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes |
| ASTM B 862 : 2014 : REDLINE | Standard Specification for Titanium and Titanium Alloy Welded Pipe |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| ISO 3601-3:2005 | Fluid power systems — O-rings — Part 3: Quality acceptance criteria |
| ASTM B 381 : 2013 : REDLINE | SPECIFICATION FOR TITANIUM AND TITANIUM ALLOY FORGINGS |
| EN 12201-1:2011 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| ASTM A 671 : 2009 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures |
| EEMUA 146 : 1986 | 90/10 COPPER NICKEL ALLOY PIPING FOR OFFSHORE APPLICATIONS - SPECIFICATION - FITTINGS |
Frequently Asked Questions
NORSOK M 630 provides material data sheets and element data sheets for piping materials used in petroleum facilities. In practice it is applied by petroleum project engineers and purchasers specifying piping materials.
NORSOK M 630 is Standards Norway / NORSOK's standard for material data sheets for piping, while NORSOK M 501 covers surface preparation and protective coating (Norway). NORSOK M 630 provides material data sheets and element data sheets for piping materials used in petroleum facilities. NORSOK M 501 specifies surface preparation and protective coating systems for offshore and related petroleum facilities.
No — NORSOK M 630 is a standard listed for Norway published by Standards Norway / NORSOK, with its listed region as Norway.
NORSOK M 630 is used by petroleum project engineers and purchasers specifying piping materials. It is a standard listed for Norway published by Standards Norway / NORSOK.
NORSOK M 630 provides material data sheets and element data sheets for piping materials used in petroleum facilities. It is a standard listed for Norway published by Standards Norway / NORSOK.
Summarise
Sorry this product is not available in your region.