EN ISO 20846:2011
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011)
Superseded date
10-10-2019
Superseded by
Published date
01-10-2011
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Principle
4 Reagents and materials
5 Apparatus
6 Sampling
7 Apparatus preparation
8 Apparatus calibration and verification
9 Procedure
10 Calculation
11 Expression of results
12 Precision
13 Test report
Bibliography
ISO 20846:2011 specifies an ultraviolet (UV) fluorescence test method for the determination of the sulfur content of motor gasolines containing up to 3,7 % (m/m) oxygen [including those blended with ethanol up to about 10 % (V/V)], and of diesel fuels, including those containing up to about 10 % (V/V) fatty acid methylester (FAME), having sulfur contents in the range 3 mg/kg to 500 mg/kg. Other products can be analysed and other sulfur contents can be determined according to this test method, however, no precision data for products other than automotive fuels and for results outside the specified range have been established for ISO 20846:2011. Halogens interfere with this detection technique at concentrations above approximately 3 500 mg/kg.
| Committee |
CEN/TC 19
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ONORM EN ISO 20846 : 2012 | Identical |
| BS EN ISO 20846:2011 | Identical |
| GOST R EN ISO 20846 : 2006 | Identical |
| SN EN ISO 20846 : 2012 | Identical |
| NBN EN ISO 20846 : 2011 | Identical |
| I.S. EN ISO 20846:2011 | Identical |
| SS-EN ISO 20846 : 2011 | Identical |
| DIN EN ISO 20846:2018-10 (Draft) | Identical |
| PN EN ISO 20846 : 2012 | Identical |
| UNI EN ISO 20846 : 2012 | Identical |
| NF EN ISO 20846 : 2011 | Identical |
| ISO 20846:2011 | Identical |
| BS 2000-490(2011) : 2011 | Identical |
| UNE-EN ISO 20846:2012 | Identical |
| IP 490 : 2012 | Identical |
| NEN EN ISO 20846 : 2011 | Identical |
| DIN EN ISO 20846:2012-01 | Identical |
| NS EN ISO 20846 : 2011 | Identical |
| BS EN 16734 : 2016 | AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
| 14/30294041 DC : 0 | BS EN 16709 - AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 OR B30) - REQUIREMENTS AND TEST METHODS |
| PD CEN/TR 16389:2017 | Automotive fuels. Paraffinic diesel fuel and blends with FAME. Background to the parameters required and their respective limits and determination |
| 09/30205523 DC : 0 | BS EN 14214 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS |
| S.R. CWA 15940:2009 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| BS EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers. Requirements and test methods |
| PD CEN/TR 15139:2005 | Petroleum products and other liquids. Applicability of test methods on sulfur determination in petrol and diesel fuel |
| 11/30249539 DC : 0 | BS EN 590 - AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| I.S. EN 16734:2016 | AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
| PD CEN/TR 17103:2017 | Petroleum and related products. Fast pyrolysis bio-oils for stationary internal combustion engines. Quality determination |
| S.R. CEN/TS 15940:2012 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| EN 16734:2016 | Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods |
| BS EN 14214:2012 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| BS EN 16709 : 2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| EN 15940:2016 | Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods |
| I.S. EN 228:2017 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| DIN EN 228:2004-03 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| 13/30275105 DC : 0 | BS EN 15376 - AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS |
| PD CEN/TR 16557:2013 | Automotive fuels. High FAME diesel fuel blends (B11-B30). Background to the parameters required and their respective limits and determination |
| 09/30206692 DC : 0 | BS EN 228 - AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| DIN EN 16900 E : 2017 | FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 16709:2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| PD CEN/TR 15367-3:2009 | Petroleum products. Guide for good housekeeping Prevention of cross contamination |
| DIN EN 15940:2016-09 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| UNE-EN 16734:2017 | Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods |
| S.R. CWA 16379:2011 | FUELS AND BIOFUELS - PURE PLANT OIL FUEL FOR DIESEL ENGINE CONCEPTS - REQUIREMENTS AND TEST METHODS |
| 17/30363912 DC : 0 | BS EN 17178 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE TOTAL VOLATILE SULFUR CONTENT IN LIQUEFIED PETROLEUM GASES BY ULTRAVIOLET FLUORESCENCE |
| I.S. EN 15486:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULFUR CONTENT - ULTRAVIOLET FLUORESCENCE METHOD |
| DIN EN 14214:2014-06 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| 14/30298209 DC : 0 | BS EN 16734 - AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
| PREN 590 : DRAFT 2011 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| 14/30310326 DC : 0 | BS EN 15940 - AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| I.S. CWA 15145:2005 | AUTOMOTIVE FUELS - WATER IN DIESEL FUEL EMULSIONS FOR USE IN INTERNAL COMBUSTION ENGINES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14214:2012 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| UNI CEN/TR 15367-3 : 2009 | PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION |
| I.S. EN 15940:2016 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| PREN 17178 : DRAFT 2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE TOTAL VOLATILE SULFUR CONTENT IN LIQUEFIED PETROLEUM GASES BY ULTRAVIOLET FLUORESCENCE |
| DIN EN 16900:2015-09 (Draft) | FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
| UNI EN 14214 : 2014 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| DIN EN 228:2017-08 | Automotive fuels - Unleaded petrol - Requirements and test methods; German version EN 228:2012+A1:2017 |
| 09/30206695 DC : 0 | BS EN 15376 - AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS |
| I.S. CEN TR 15367-3:2009 | PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION |
| CEN/TR 16557:2013 | Automotive fuels - High FAME diesel fuel blends (B11 - B30) - Background to the parameters required and their respective limits and determination |
| S.R. CEN/TR 17103:2017 | FAST PYROLYSIS BIO-OILS FOR STATIONARY INTERNAL COMBUSTION ENGINES - QUALITY DETERMINATION |
| PREN 228 : DRAFT 2009 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| PREN 14214 : DRAFT 2009 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS |
| S.R. CEN/TR 16389:2017 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL AND BLENDS WITH FAME - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION |
| S.R. CEN/TR 16557:2013 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL BLENDS (B11 - B30) - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION |
| EN 590:2013 | Automotive fuels - Diesel - Requirements and test methods |
| S.R. CEN/TR 16514:2013 | AUTOMOTIVE FUELS - UNLEADED PETROL CONTAINING MORE THAN 3,7% (M/M) OXYGEN - ROADMAP, TEST METHODS, AND REQUIREMENTS FOR E10+ PETROL |
| 17/30365049 DC : 0 | BS EN 17181 - LUBRICANTS - DETERMINATION OF AEROBIC BIOLOGICAL DEGRADATION OF FULLY FORMULATED LUBRICANTS IN AN AQUEOUS SOLUTION - TEST METHOD BASED ON CO[2]-PRODUCTION |
| UNE-EN 14214:2013 | Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods |
| BS EN 15486:2007 | Ethanol as a blending component for petrol. Determination of sulfur content. Ultraviolet fluorescence method |
| UNE-EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods |
| EN 15486:2007 | Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method |
| EN 228:2012+A1:2017 | Automotive fuels - Unleaded petrol - Requirements and test methods |
| EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods |
| I.S. EN 16900:2017 | FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
| PD CEN/TR 16514:2013 | Automotive fuels. Unleaded petrol containing more than 3,7 % (m/m) oxygen. Roadmap, test methods, and requirements for E10+ petrol |
| UNI CEN/TS 15940 : 2012 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| 15/30325842 DC : 0 | BS EN 16900 - FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
| CEN/TR 15367-3:2009 | Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination |
| CEN/TR 15139:2005 | Petroleum products and other liquids - Applicability of test methods on sulfur determination in petrol and diesel fuel |
| BS 2000-554(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF |
| I.S. CEN/TR 15139:2005 | PETROLEUM PRODUCTS AND OTHER LIQUIDS - APPLICABILITY OF TEST METHODS ON SULFUR DETERMINATION IN PETROL AND DIESEL FUEL |
| I.S. EN 590:2013+A1:2017&LC:2017 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| UNE-EN 16709:2016 | Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods |
| DIN EN 16709:2015-12 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| BS EN 590 : 2013 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| UNE-EN 15940:2016 | Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods |
| I.S. CWA 15293:2005 | AUTOMOTIVE FUELS - ETHANOL E85 - REQUIREMENTS AND TEST METHODS |
| UNE-EN 590:2014 | Automotive fuels - Diesel - Requirements and test methods |
| CEN/TR 17103:2017 | Petroleum and related products - Fast pyrolysis bio-oils for stationary internal combustion engines - Quality determination |
| DIN EN 14214:2003-11 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| CEN/TR 16389:2017 | Automotive fuels - Paraffinic diesel fuel and blends with FAME - Background to the parameters required and their respective limits and determination |
| DIN EN 15486:2007-11 | Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method |
| CEN/TR 16514:2013 | Automotive fuels - Unleaded petrol containing more than 3,7 % (m/m) oxygen - Roadmap, test methods, and requirements for E10+ petrol |
| CEN/TS 15940:2012 | Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods |
| UNE-EN 228:2013 | Automotive fuels - Unleaded petrol - Requirements and test methods |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| ISO 1042:1998 | Laboratory glassware — One-mark volumetric flasks |
| ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
| ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
| ISO 91-1:1992 | Petroleum measurement tables Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.