EN ISO 2592:2017
Current
Current
The latest, up-to-date edition.
Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017)
Published date
27-09-2017
Publisher
Sorry this product is not available in your region.
European foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Chemicals and materials
6 Apparatus
7 Preparation of apparatus
8 Sampling
9 Sample handling
10 Procedure for determining flash point
11 Procedure for determining fire point
12 Calculation
13 Expression of results
14 Precision
15 Test report
Annex A (normative) - Cleveland open cup
apparatus
Annex B (normative) - Temperature measuring
device specification
Annex C (informative) - Verification of apparatus
Annex D (informative) - Prevention of surface
skin formation when testing bitumens
and asphalts
Bibliography
ISO 2592:2017 specifies a procedure for the determination of flash and fire points of petroleum products using the Cleveland open cup apparatus. It is applicable to petroleum products having open cup flash points between 79 °C and 400 °C, except fuel oils which are most commonly tested by the closed cup procedure described in ISO 2719.
| Committee |
CEN/TC 19
|
| DevelopmentNote |
Supersedes EN 22592. (03/2002)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN ISO 2592:2018 | Identical |
| NS EN ISO 2592 : 2017 | Identical |
| DIN EN ISO 2592:2018-01 | Identical |
| UNI EN ISO 2592 : 2003 | Identical |
| BS EN ISO 2592:2017 | Identical |
| PN EN ISO 2592 : 2017 | Identical |
| ISO 2592:2017 | Identical |
| UNI EN ISO 2592:2017 | Identical |
| ONORM EN ISO 2592 : 2017 | Identical |
| NBN EN ISO 2592 : 2001 | Identical |
| DIN EN ISO 2592:2016-03 (Draft) | Identical |
| SS-EN ISO 2592:2017 | Identical |
| NF EN ISO 2592 : 2017 | Identical |
| UNE-EN ISO 2592:2002 | Identical |
| SN EN ISO 2592 : 2018 | Identical |
| NEN EN ISO 2592 : 2017 | Identical |
| IP 36 : 2002 | Identical |
| I.S. EN ISO 2592:2017 | Identical |
| I.S. EN 13121-3:2016 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| I.S. EN 15322:2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| UNE-EN 60695-1-20:2016 | Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance |
| CEI EN 60695-9-1 : 2014 | FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE |
| BS EN 60836:2015 | Specifications for unused silicone insulating liquids for electrotechnical purposes |
| PD CEN/TR 14489:2005 | Fire-resistant hydraulic fluids. Classification and specification. Guidelines on selection for the protection of safety, health and the environment |
| CEI EN 61099 : 2011 | INSULATING LIQUIDS - SPECIFICATIONS FOR UNUSED SYNTHETIC ORGANIC ESTERS FOR ELECTRICAL PURPOSES |
| UNE-EN 13924-1:2016 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens |
| BS 2000-58(2007) : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD |
| UNE-EN 60695-9-1:2013 | Fire hazard testing - Part 9-1: Surface spread of flame - General guidance |
| I.S. CLC/TS 61112:2006 | BLANKETS OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| DIN EN 13121-1:2003-10 | GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions |
| DIN EN 13304:2009-07 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFICATION OF OXIDISED BITUMENS |
| EN 13121-1:2003 | GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions |
| DIN EN 13305:2009-07 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFICATION OF HARD INDUSTRIAL BITUMENS |
| DIN EN 1427:2015-09 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD |
| BS EN 1427:2015 | Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method |
| UNE-EN 16245-2:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| UNE-EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| BS EN 14733 : 2005 | BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL |
| BS EN 12591:2009 | Bitumen and bituminous binders. Specifications for paving grade bitumens |
| EN 12595:2014 | Bitumen and bituminous binders - Determination of kinematic viscosity |
| EN 13305:2009 | Bitumen and bituminous binders - Framework for specification of hard industrial bitumens |
| CEN/TR 15138:2005 | Petroleum products and other liquids - Guide to flash point testing |
| EN 61112:2009 | Live working - Electrical insulating blankets |
| EN 61111 : 2009 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
| EN 10300:2005 | Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
| EN 13304:2009 | Bitumen and bituminous binders - Framework for specification of oxidised bitumens |
| EN 13121-3:2016 | GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
| EN 61099:2010 | Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes |
| I.S. EN 10300:2005 | Steel tubes and fittings for onshore and offshore pipelines -Bituminous hot applied materials for external coating |
| 13/30255300 DC : 0 | BS EN 1427 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHODBS EN 1427 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD |
| BS EN 61099:2010 | Insulating liquids. Specifications for unused synthetic organic esters for electrical purposes |
| BS EN 60695-9-1:2013 | Fire hazard testing Surface spread of flame. General guidance |
| BS EN 60695-1-40:2014 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Insulating liquids |
| 11/30239977 DC : 0 | BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| DIN EN 16245-2:2013-08 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| DIN EN 15322:2013-07 | Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders |
| BS EN 60464-2:2001 | Varnishes used for electrical insulation Methods of test |
| DIN EN 16028:2012-10 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
| BS EN 13924-1:2015 | Bitumen and bituminous binders. Specification framework for special paving grade bitumen Hard paving grade bitumens |
| 05/30138276 DC : DRAFT AUG 2005 | EN 12595 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
| CEI EN 61111 : 2010 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
| UNI EN 13924-2 : 2014 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
| I.S. EN 61111:2009 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
| I.S. EN 60903:2003 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
| PREN 12595 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
| I.S. EN 61039:2008 | CLASSIFICATION OF INSULATING LIQUIDS |
| I.S. EN 13121-1:2003 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS |
| I.S. EN 14023:2010 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS |
| I.S. EN 13304:2009 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFICATION OF OXIDISED BITUMENS |
| I.S. EN 1427:2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD |
| I.S. EN 13305:2009 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFICATION OF HARD INDUSTRIAL BITUMENS |
| I.S. EN 12591:2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| DIN EN 13121-3:2016-10 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| DIN EN 12591:2009-08 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| VDI 3397 Blatt 2:2014-06 | Maintenance of metalworking fluids for metalcutting and forming operations - Measures for maintaining quality, process improvement, and for reducing solid and liquid waste |
| BS 7933-1:2007 | Electric cables. Accessories. Material characterisation Fingerprinting and type tests for resinous compounds |
| CEI EN 60903 : 2005 | LIVE WORKING - GLOVES OF INSULATING MATERIAL IMPIANTI |
| I.S. EN 12595:2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
| CEI EN 61112 : 2010 | LIVE WORKING - ELECTRICAL INSULATING BLANKETS |
| DIN EN 13924-2:2014-07 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
| BS EN 60695-1-20:2016 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. General guidance |
| BS EN 61039:2008 | Classification of insulating liquids |
| BS EN 61112:2009 | Live working. Electrical insulating blankets |
| DIN EN 13924-1:2016-02 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
| BS EN 15322:2013 | Bitumen and bituminous binders. Framework for specifying cut-back and fluxed bituminous binders |
| CLC/TS 61111:2006 | Matting of insulating material for electrical purposes |
| BS EN 16028:2012 | Railway applications. Wheel/rail friction management. Lubricants for trainborne and trackside applications |
| HD 631.1 : 200S2 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS |
| I.S. CLC/TS 61111:2006 | MATTING OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| I.S. EN 61221:2004 | PETROLEUM PRODUCTS AND LUBRICANTS - TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS (CATEGORY ISO-L-TCD) - SPECIFICATIONS |
| I.S. CWA 15145:2005 | AUTOMOTIVE FUELS - WATER IN DIESEL FUEL EMULSIONS FOR USE IN INTERNAL COMBUSTION ENGINES - REQUIREMENTS AND TEST METHODS |
| BS EN 13121-3:2016 | GRP tanks and vessels for use above ground Design and workmanship |
| PREN 15322 : DRAFT 2011 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| I.S. EN 60695-1-40:2014 | FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS |
| I.S. EN 16245-2:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| UNE-EN 13121-3:2017 | GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
| I.S. EN 61112:2009 | LIVE WORKING - ELECTRICAL INSULATING BLANKETS |
| I.S. EN 60464-2:2002 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| BS EN 13121-1:2003 | GRP tanks and vessels for use above ground Raw materials. Specification conditions and acceptance conditions |
| BS EN 12595:2014 | Bitumen and bituminous binders. Determination of kinematic viscosity |
| UNE-EN 14733:2006 | Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control |
| EN 16245-2:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| UNI EN 16028 : 2012 | RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
| UNI EN 14733 : 2010 | BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL |
| UNI EN 16245-2 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| UNI EN 13304 : 2009 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFICATION OF OXIDISED BITUMENS |
| UNI EN 14023 : 2010 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS |
| UNI EN 12595 : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
| UNI EN 12591 : 2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| UNI EN 13305 : 2009 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFICATION OF HARD INDUSTRIAL BITUMENS |
| UNE-EN 60836:2015 | Specifications for unused silicone insulating liquids for electrotechnical purposes |
| UNI EN 15322 : 2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| BS EN 61111 : 2010 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
| BS EN 13924-2:2014 | Bitumen and bituminous binders. Specification framework for special paving grade bitumen Multigrade paving grade bitumens |
| BS EN 60903:2003 | Live working. Gloves of insulating material |
| UNE-EN 60695-1-40:2014 | Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids |
| 13/30255325 DC : 0 | BS EN 12595 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
| BS EN 16245-2:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers |
| PREN 1427 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD |
| BS EN 60079-6:2007 | Explosive atmospheres Equipment protected by oil immersion \'o\' |
| 04/30117724 DC : DRAFT AUG 2004 | EN 14023 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK SPECIFICATION FOR POLYMER MODIFIED BITUMENS |
| I.S. EN 60836:2015 | SPECIFICATIONS FOR UNUSED SILICONE INSULATING LIQUIDS FOR ELECTROTECHNICAL PURPOSES |
| I.S. CEN/TR 15138:2005 | PETROLEUM PRODUCTS AND OTHER LIQUIDS - GUIDE TO FLASH POINT TESTING |
| I.S. EN 60695-1-20:2016 | FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE |
| I.S. CEN/TR 14489:2005 | FIRE-RESISTANT HYDRAULIC FLUIDS - CLASSIFICATION AND SPECIFICATION - GUIDELINES ON SELECTION FOR THE PROTECTION OF SAFETY, HEALTH AND THE ENVIRONMENT |
| CLC/TS 61112:2006 | Blankets of insulating material for electrical purposes |
| DIN EN 12595:2015-01 | Bitumen and bituminous binders - Determination of kinematic viscosity |
| DIN EN 14023:2013-04 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| BS EN 14023:2010 | Bitumen and bituminous binders. Specification framework for polymer modified bitumens |
| UNE-EN 16028:2013 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
| BS EN 13305:2009 | Bitumen and bituminous binders. Framework for specification of hard industrial bitumens |
| UNE-EN 60079-6:2016 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| BS EN 13304:2009 | Bitumen and bituminous binders. Framework for specification of oxidised bitumen |
| UNE-EN 12595:2015 | Bitumen and bituminous binders - Determination of kinematic viscosity |
| BS EN 10300:2005 | Steel tubes and fittings for onshore and offshore pipelines. Bitumen hot applied materials for external coating |
| CEN/TR 14489:2005 | Fire-resistant hydraulic fluids - Classification and specification - Guidelines on selection for the protection of safety, health and the environment |
| IP 319 : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF KINEMATIC VISCOSITY |
| EN 16028:2012 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
| EN 14023:2010 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| EN 14733:2005+A1:2010 | Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control |
| EN 13924-1:2015 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens |
| EN 15322:2013 | Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders |
| EN 13924-2:2014 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens |
| 11/30250572 DC : 0 | BS EN 15322 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| PD CEN/TR 15138:2005 | Petroleum products and other liquids. Guide to flash point testing |
| I.S. EN 13924:2006 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
| BS 2000-58(2015) : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD |
| 14/30298583 DC : 0 | BS EN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| I.S. EN 13924-2:2014 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
| 11/30247867 DC : 0 | BS EN 13924-2 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL BITUMEN - PART 2: MULTIGRADE BITUMENOUS BINDERS |
| CEI EN 61039 : 2009 | CLASSIFICATION OF INSULATING LIQUIDS |
| CEI 20-79 : 2009 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS |
| 13/30255316 DC : 0 | BS EN 13924-1 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
| CEI EN 60079-6 : 2016 | EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY LIQUID IMMERSION 'O' |
| CEI EN 60695-1-40 : 2014 | FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS |
| PREN 12591 : DRAFT 2016 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| I.S. EN 16028:2012 | RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
| UNE-EN 61099:2011 | Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes |
| I.S. EN 60695-9-1:2013 | FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE (IEC 60695-9-1:2013 (EQV)) |
| I.S. EN 60079-6:2015 | EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY LIQUID IMMERSION 'O' |
| I.S. EN 13924-1:2015 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
| UNE-EN 15322:2014 | Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders |
| I.S. EN 61099:2010 | INSULATING LIQUIDS - SPECIFICATIONS FOR UNUSED SYNTHETIC ORGANIC ESTERS FOR ELECTRICAL PURPOSES |
| BS EN 13924:2006 | Bitumen and bituminous binders. Specifications for hard paving grade bitumens |
| EN 12591:2009 | Bitumen and bituminous binders - Specifications for paving grade bitumens |
| EN 61039 : 2008 | CLASSIFICATION OF INSULATING LIQUIDS |
| EN 60464-2:2001/A1:2006 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| EN 60695-1-40:2014 | Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids |
| DIN EN 14733:2010-12 | BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL |
| DIN EN 10300:2006-02 | Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
| DIN EN 13924:2006-07 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
| EN 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| EN 60836:2015 | Specifications for unused silicone insulating liquids for electrotechnical purposes |
| EN 60903 : 2003 COR 2005 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
| EN 60695-1-20:2016 | Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance |
| EN 60695-9-1:2013 | FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE (IEC 60695-9-1:2013) |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| ISO/TR 29662:2009 | Petroleum products and other liquids Guidance for flash point testing |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| CEN/TR 15138:2005 | Petroleum products and other liquids - Guide to flash point testing |
| ISO 9038:2013 | Determination of sustained combustibility of liquids |
| ISO Guide 33:2015 | Reference materials — Good practice in using reference materials |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| ASTM E 2251 : 2014 : REDLINE | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
| ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
| IEC 60751:2008 | Industrial platinum resistance thermometers and platinum temperature sensors |
| ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| ASTM E 1137 : 1997 | Standard Specification for Industrial Platinum Resistance Thermometers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.