EN ISO 4957:1999
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Tool steels (ISO 4957:1999)
Superseded date
31-01-2019
Superseded by
Published date
15-12-1999
Publisher
Sorry this product is not available in your region.
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Inspection, testing and conformance of products
6 Marking
7 Ordering and designation
Annex A (informative) Hardness-tempering
temperature-curves
Annex B (normative) Supplementary or special
requirements
Annex C (informative) Designations of comparable steels
Annex ZA (normative) Normative references to international
publications with their relevant European publications
Bibliography
This international standard covers the grades of wrought tool steels listed in tables 2, 4, 6 and 8, namely: a) unalloyed cold-work tool steels (see table 2); b) alloyed cold-work tool steels (see table 4); c) alloyed hot-work tool steels (see table 6); d) high-speed steels (see table 8). If not stated in the following, this international standard applies to all types of hot-rolled, forged or cold-drawn products which are supplied in one of the surface and heat-treatment conditions given in 5.1.2 and table 1.
| Committee |
CEN/TC 459/SC 5
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DS EN ISO 4957 : 2002 | Identical |
| DS EN ISO 4957:2018 | Identical |
| SS EN ISO 4957:2018 | Identical |
| I.S. EN ISO 4957:2000 | Identical |
| PN EN ISO 4957 : 2004 | Identical |
| SN EN ISO 4957 : 2001 | Identical |
| UNE-EN ISO 4957:2000 | Identical |
| PN EN ISO 4957 : 2018 | Identical |
| ONORM EN ISO 4957 : 2001 | Identical |
| UNI EN ISO 4957 : 2002 | Identical |
| ÖNORM EN ISO 4957: 2018 | Identical |
| DIN EN ISO 4957:2001-02 | Identical |
| DIN EN ISO 4957:2018-11 | Identical |
| I.S. EN ISO 4957:2018 | Identical |
| BS EN ISO 4957:2000 | Identical |
| NEN EN ISO 4957 : 2000 | Identical |
| ISO 4957:2018 | Identical |
| NBN EN ISO 4957 : 2000 | Identical |
| SN EN ISO 4957 : 2018 | Identical |
| NF EN ISO 4957 : 2018 | Identical |
| ISO 4957:1999 | Identical |
| NEN EN ISO 4957:2018 | Identical |
| UNI EN ISO 4957:2018 | Identical |
| NF EN ISO 4957 : 2000 | Identical |
| NS EN ISO 4957 : 1ED 2000 | Identical |
| 10/30234616 DC : 0 | BS EN 14420-7 - HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
| PREN 10051 : DRAFT 2009 | HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE |
| BS EN 13631-4:2002 | Explosives for civil uses. High explosives Determination of sensitiveness to impact of explosives |
| BS EN 14420-7:2013 | Hose fittings with clamp units Cam locking couplings |
| EN 62878-1-1:2015 | Device embedded substrate - Part 1-1: Generic specification - Test methods |
| 10/30234631 DC : 0 | BS EN 14420-8 - HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| BS EN 62878-1-1:2015 | Device embedded substrate Generic specification. Test methods |
| 09/30200092 DC : 0 | BS EN 10051 - HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| I.S. EN 14420-8:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| DIN EN 14420-8:2016-06 | HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| DIN EN 13631-4:2002-12 | EXPLOSIVES FOR CIVIL USES - HIGH EXPLOSIVES - PART 4: DETERMINATION OF SENSITIVENESS TO IMPACT OF EXPLOSIVES |
| DIN EN 10088-1:2014-12 | Stainless steels - Part 1: List of stainless steels; German version EN 10088-1:2014 |
| DIN EN 14420-7:2013-09 | Hose fittings with clamp units - Part 7: Cam locking couplings |
| I.S. EN 10088-1:2014 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| DIN EN 13763-3:2002-12 | EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 3: DETERMINATION OF SENSITIVENESS TO IMPACT |
| I.S. EN 14420-7:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
| VDI 3388:2012-03 | Materials for trimming and forming dies |
| VDI 3357:2014-01 | Sliding elements in large stamping dies |
| UNE-EN 14420-7:2014 | Hose fittings with clamp units - Part 7: Cam locking couplings |
| EN 13630-4:2002 | Explosives for civil uses - Detonating cords and safety fuses - Part 4: Determination of sensitiveness to impact of detonating cords |
| UNI EN 10051 : 2011 | CONTINUOUSLY HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE |
| UNI EN 14420-7 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
| UNI EN 10088-1 : 2014 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| PREN 14420-7 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
| DIN EN 1097-2:2016-07 (Draft) | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| I.S. EN 1097-2:2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| UNI EN 1097-2 : 2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| BS EN 13630-4:2002 | Explosives for civil uses. Detonating cords and safety fuses Determination of sensitiveness to impact of detonating cords |
| BS EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation |
| BS EN 13763-3:2002 | Explosives for civil uses. Detonators and relays Determination of sensitiveness to impact |
| EN 13763-3:2002 | Explosives for civil uses - Detonators and relays - Part 3: Determination of sensitiveness to impact |
| EN 13631-4:2002 | Explosives for civil uses - High explosives - Part 4: Determination of sensitiveness to impact of explosives |
| EN 14420-7:2013 | Hose fittings with clamp units - Part 7: Cam locking couplings |
| EN 14420-8:2013+A1:2016 | Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |
| 01/715519 DC : DRAFT NOV 2001 | PREN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| 11/30254165 DC : 0 | BS EN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| PREN 14420-8 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| PREN 10088-1 : DRAFT 2011 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
| UNE-EN 10088-1:2015 | Stainless steels - Part 1: List of stainless steels |
| BS EN 14420-8 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| BS EN 10088-1:2014 | Stainless steels List of stainless steels |
| UNE-EN 14420-8:2014 | Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| ISO 6929:2013 | Steel products — Vocabulary |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| ISO/TR 9769:1991 | Steel and iron Review of available methods of analysis |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| ISO 1035-3:1980 | Hot-rolled steel bars — Part 3: Dimensions of flat bars |
| ISO 1035-4:1982 | Hot-rolled steel bars — Part 4: Tolerances |
| ISO 4948-1:1982 | Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
| ISO 1035-1:1980 | Hot-rolled steel bars — Part 1: Dimensions of round bars |
| ISO 4955:2016 | Heat-resistant steels |
| ISO 6506:1981 | Metallic materials — Hardness test — Brinell test |
| ISO 6508:1986 | Metallic materials Hardness test Rockwell test (scales A - B - C - D - E - F - G - H - K) |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| ISO 9722:1992 | Nickel and nickel alloys Composition and forms of wrought products |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.