EN ISO 6975:2005
Current
Current
The latest, up-to-date edition.
Natural gas - Extended analysis - Gas-chromatographic method (ISO 6975:1997)
Published date
11-05-2005
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 Principle
5 Analysis and analytical requirements
6 Procedures
7 Calibration and control charts
8 Calculations
9 Precision
10 Test report
Annex A (informative) Determination of the response
curves for the main components in
a sample
Annex B (informative) Further details on the matrices used
in Annex A
Annex C (informative) List of retention indices
Annex D (informative) Bibliography
Figures
Tables
describes the method of test to determine the stability of transmission performance of a finished cable used in analogue and digital communication systems when submitted to temperature changes which may occur during use, storage or transportation.
| Committee |
CEN/TC 238
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| I.S. EN ISO 6975:2005 | Identical |
| ISO 6975:1997 | Identical |
| PN EN ISO 6975 : 2010 | Identical |
| BS EN ISO 6975:2005 | Identical |
| SS-EN ISO 6975:2005 | Identical |
| DIN EN ISO 6975:2005-09 | Identical |
| NS EN ISO 6975 : 1ED 2005 | Identical |
| NF EN ISO 6975 : 2005 | Identical |
| NEN EN ISO 6975 : 2005 | Identical |
| NBN EN ISO 6975 : 2005 | Identical |
| UNE-EN ISO 6975:2006 | Identical |
| BS EN 62282-3-200:2016 | Fuel cell technologies Stationary fuel cell power systems. Performance test methods |
| 14/30296490 DC : 0 | BS EN 16723-2 - NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 2: AUTOMOTIVE FUEL SPECIFICATIONS |
| BS EN 16723-2:2017 | Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network Automotive fuels specification |
| I.S. EN 62282-3-2:2006 | FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| I.S. EN 16723-2:2017 | NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 2: AUTOMOTIVE FUELS SPECIFICATION |
| I.S. EN 62282-3-200:2016 | FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| EN 62282-3-200:2016 | Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods |
| DIN EN 16723-2:2017-10 | NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 2: AUTOMOTIVE FUELS SPECIFICATION |
| I.S. EN 16726:2015 | GAS INFRASTRUCTURE - QUALITY OF GAS - GROUP H |
| DIN EN 1776:2016-05 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| I.S. EN 1776:2015 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| DIN EN 16723-2:2014-06 (Draft) | NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 2: AUTOMOTIVE FUELS SPECIFICATION |
| 14/30296487 DC : 0 | BS EN 16723-1 - NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 1: SPECIFICATIONS FOR BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK |
| I.S. EN 16723-1:2016 | NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 1: SPECIFICATIONS FOR BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK |
| DIN EN 16726:2016-04 | GAS INFRASTRUCTURE - QUALITY OF GAS - GROUP H |
| BS EN 16723-1:2016 | Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network Specifications for biomethane for injection in the natural gas network |
| BS EN 62282-3-2:2006 | Fuel cell technologies Stationary fuel cell power systems. Performance test methods |
| BS EN 1776:2015 | Gas infrastructure. Gas measuring systems. Functional requirements |
| EN 16723-2:2017 | Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network - Part 2: Automotive fuels specification |
| EN 1776:2015 | Gas infrastructure - Gas measuring systems - Functional requirements |
| EN 16726:2015 | Gas infrastructure - Quality of gas - Group H |
| EN 16723-1:2016 | Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network - Part 1: Specifications for biomethane for injection in the natural gas network |
| BS EN 16726 : 2015 | GAS INFRASTRUCTURE - QUALITY OF GAS - GROUP H |
| EN 62282-3-2:2006 | Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods |
| UNE-EN 16723-1:2017 | Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network - Part 1: Specifications for biomethane for injection in the natural gas network |
| UNE-EN 16726:2016 | Gas infrastructure - Quality of gas - Group H |
| UNE-EN 1776:2017 | Gas infrastructure - Gas measuring systems - Functional requirements |
| ISO 6570-1:1983 | Natural gas — Determination of potential hydrocarbon liquid content — Part 1: Principles and general requirements |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| ISO 10715:1997 | Natural gas — Sampling guidelines |
| ISO 6974-2:2012 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 2: Uncertainty calculations |
| ISO 6974-4:2000 | Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns |
| ISO 6974-3:2000 | Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns |
| ISO 6143:2001 | Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures |
| ISO 6326-1:2007 | Natural gas — Determination of sulfur compounds — Part 1: General introduction |
| ISO 6142:2001 | Gas analysis — Preparation of calibration gas mixtures — Gravimetric method |
| ISO 14111:1997 | Natural gas — Guidelines to traceability in analysis |
| ISO 6568:1981 | Natural gas — Simple analysis by gas chromatography |
| ISO 6974-1:2012 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 1: General guidelines and calculation of composition |
| ISO 7504:2015 | Gas analysis — Vocabulary |
| ISO 6326-5:1989 | Natural gas — Determination of sulfur compounds — Part 5: Lingener combustion method |
| ISO 6326-3:1989 | Natural gas — Determination of sulfur compounds — Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry |
| ISO 6326-4:1994 | Natural gas — Determination of sulfur compounds — Part 4: Gas chromatographic method using a flame photometric detector for the determination of hydrogen sulfide, carbonyl sulfide and sulfur-containing odorants |
| ISO 6326-2:1981 | Gas analysis — Determination of sulphur compounds in natural gas — Part 2: Gas chromatographic method using an electrochemical detector for the determination of odoriferous sulphur compounds |
| ISO 6974-5:2014 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.